I have a emachines et1331g-03w I am trying to install Ubuntu on. I have tried both 8.04 32-bit and 9.10 32-bit desktop versions. They both just go to a black screen and hang when you try to run from the cd or install. I have not tried the 64-bit version yet.
View 7 RepliesAt random times, natty crashes for no obvious reason. The desktop will freeze for about 3 seconds, and then everything goes black. But it seems that everything is still running, because I was able to hit ctrl-Alt-f1 and it worked. This has happened ever since I upgraded to natty yesterday, but is becoming more frequent
View 9 Replies View RelatedI'm trying to install Ubuntu 10.10 from a Live CD. I can get to the Menu where I get to choose "Try without installing","Install Ubuntu","Test Disk," etc.After hitting ANY of the options, it hangs on a black screen, sometimes with a cursor blinking in the upper left, sometimes not. From all the research I've been able to dig up it seems it's a graphics card issue, but I haven't been able to find anything exactly like my problem as most everything I've been able to find say's theirs continues to install but then causes problems later, or they're trying to load on a dual boot system. I can't seem to get past that first "Install Ubuntu" selection. As soon as I hit enter it goes black.
I'm wondering if I can't load the nvidia drivers from a command line before I attempt to install from the live CD, but I don't know how to do that. I have the .run file downloaded but don't know where to go from there.
I'm a fairly new linux user and I seem to have a problem with ubuntu 8.10 after installing it.To make sure everything was working fine before i could do a dual installation, i ran the live cd and it worked like a charm.Everything works fine in the live cd....the internet, sound, graphic drivers (even the special effects seemed to be work fine)I thought wow...after having a bitter experience with Ubuntu 8.04 and 7.10 (I couldnt install those at all coz of driver issues and stuff) I thought this is it!So I used the wubi installer to install ubuntu in my D drive (I didnt wanna use C just to be safe as the primary OS is installed there). Gave it a healthy space of 15 gb. Finished the installation and the rebooted.I went inside Ubuntu which started doing its installation and copying of files and stuff. So far so good.....
And then once it finished its installation and copying of files (100 %), the screen went blank and i see a cursor blinking. I thought maybe its restarting and thats why it must be doing this.I wait for nearly 10 mins and nothings happening except for the cursor blinking on the black screen. I press the caps lock key to see if anything is processing. Nope. So i manually shut it down and then load ubuntu.It loads like 20-30%....rests for a while....and then it loads a bit (not completley)....after that it takes me to a command line asking me for my password and username.I enter those correctly. But it doesnt get me into the main GUI screen yet.
It shows me a lot of the this error msg:
-bash: /dev/null:Permission denied
I'm still in command line (or terminal to be precise). So i use 'startx' (something which i learned from my csci labs ) to start a new session. It showed signs of starting a new session (i can see the mouse pointer and stuff) and then poof....back to the command line again.So I shut it down and load it again in recovery mode. It shows signs of the same symptoms in the splash screen (going very slow after 20-30 % ) and then this time, before i'm asked for my username and password in the command line, it shows a lot of warnings: fake daemon running (or something like that) and i cant even use startx!So i didnt know what to do, uninstalled ubuntu and did a fresh installation (wubi and in the same D drive). Reboot. Install and copy files 100% and then a blank screen again with the dreaded cursor blinking. I still wait for about 10 mins and nothing yet happens. So I manually shut it down (again) and then load ubuntu and unsurprisingly i have the same problem as what i described before....doesnt load properly and i'm not able to come out of the terminal.
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
View 2 Replies View RelatedI am trying to install ubuntu on my dekstop computer, i put in the cd it boots, i choose language, and when i get the menu where i can start ubuntu from cd, install it etc. Whatever option i press enter at, i am stuck at a black screen with a flashing white _ in left top corner.I am using an external usb dvd drive.i tried the same usb dvd drive at my laptop and the white _ was there for just some seconds and then ubuntu started doing what it should.
View 2 Replies View RelatedI've been wanting to switch to x64 to get the most out of my hardware, but I seem to have run into some problems... Over the past three days I've been working diligently at trying to figure out why when I try to install 10.04 x64 I get a black screen with a blinking cursor... I think it's deeper than I had initially thought. A look at what I've done:Since I thought it was just a graphics problem with Lucid, I tried changing the boot parameters. Here are some of the things I've tried (I'm sure I've tried more in my frantic periods where I just type things) to append after 'quiet splash'.I've now tried the 10.04 alternate disc, too. The same problem occurred... I tried 'nomodeset' and 'i915.modeset=0' but nothing's working. I'd really appreciate some help; ot seems like a lot of people have this issue. One other way I'm trying is to extract the ISO and add the kernel boot as an option in GRUB.I doubt it'll change anything, but it's worth a shot. This must be an nVidia problem...
View 1 Replies View RelatedWhat happens is, the program crashes for whatever reason (I don't know the exact cause, but the program terminates), and then immediately everything on my screen goes black. However, I still have a cursor, and all other programs that were running continue to run (I can access my other game servers from other computers). The cursor changes icons as I move it around the black screen, as though it is interacting with the programs that are still running. ctrl+alt+f2 still works, so at least I can restart the computer safely.
View 2 Replies View RelatedI got sick of unity yesterday and tried to install Gnome3. While doing this, i ran apt-get update. I believe that this updated my xorg to 1.1+ (or whatever) making it incompatible with the proprietary ATI drivers I'm running. So I tried a whole bunch of stuff, from reinstalling the drivers from the ttyl1 prompt, to doing startx from the command line and using synaptic to remove the proprietary drivers and install radeon, etc, etc.I think the issue right now is that there are bits of the proprietary driver left that are messing with the open source driver. Whenever I do startx, i get artifacting all over the screen, which never seems to go away.
View 8 Replies View RelatedI'm use ubuntu 8.10 ( on a msi 645 notebook ) and i'm trying to shutdown from grub. I have add these entries to menu.lst after the ### END AUTOMAGIC KERNEL LIST
title Halt
halt
I only get a black screen but the pc is still running someone said it only put grub to sleep or something. I also tried this commands sudo shutdown -h now or init 0, poweroff... but there all "unrecognized commands" in grub... Is there a possibilty to shutdown from grub.
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View Relatedjust installed 10.10 on my Sony Vaio F laptop. Here's my specs:Processor: Intel Core i7 720QM (1.6 GHz)Memory: 6 GB DDR3 (1333 MHZ)Graphics: NVIDIA GeForce 330M (1 GB VRAM)Hard Drive: 500 GB (7200 rpm)Native Resolution: 1920x1080I shrunk my Windows partition, installed Ubuntu on it's own partition with swap space, and mostly everything went fine. When I booted up, the resolution was set at something like 2048x1536, and it only displayed the top left corner of about 70% of the screen. When I changed to any other resolution, it looked really bad, and the whole screen still wasn't displayed.
Then something popped up telling me to install a driver for my graphics card, so I did, figuring it would fix the problem. When I booted and picked Ubuntu, I was stuck with a black screen. So I restarted and tried booting into safe mode. I got in, and it displayed the whole screen at 800x600. Still no luck in regular mode, however.
I'm running Ubuntu 10.10 on what used to be a windows vista. I bought me a new graphics card today so that I could run dual screen (GeForce210). I saw a guide at [URL] and I followed it.
I typed: sudo apt-get install nvidia-current
then I restarted my computer, once again as instructed I typed:
sudo nvidia-xconfig then logged out as instructed...
After I logged out the screen went black and I was not able to login. So I restarted my computer. Now when I turn on my computer I am getting this error and it's stopping at it.
fsck from util-linux-n/g 2.17.2
/dev/sda1: clean, 255658/294092280 files, 5031534/117616640 blocks
*starting apparmor profiles
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
*setting sensors limits
Starting GNUstep distributed object mapper: start-stop-daemon: unable to stat /usr/bin/gdomap/ (no such file or directory)
speech-dispatcher disabled: edit /etc/default/speech-dispatcher
*starting the winbind daemon winbind
It stops on this screen. I do not want to wipe it but I cannot get it started. I do have an external hard drive and at the moment I am using my Ubuntu disc to "try Ubuntu" I was going to try backing up everything I have but it will not let me access root because I am not logged on to that user, is there anything I can do to get pass this? I've called around and no one is willing to work on my computer since it is now running on Ubuntu 10.10
I am new to Linux but wanted to try it. I downloaded Ubuntu and burned the ISO to disc, I restarted my PC and the disc runs and seems to be loading, a purple screen appears with a small icon at the bottom, then the screen turns black and that is all, disc stops running and nothing else, am i doing something wrong here?
View 2 Replies View RelatedI just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.
View 9 Replies View RelatedThe screen of my years-old HP laptop (running Natty) freezes and eventually turns black. Ctrl-Alt-F# works to switch to the terminals. My fan is even louder than usual. I spend some time fooling around with ps and kill and shut down some of the most resource-consuming processes, which quiets the fan a bit, but tty7 still shows a black screen except for my mouse pointer.
I finally decide to shut it down altogether, but then I think to myself, "Self, you've used the power switch to shut down before in this situation, but shouldn't there be a more proper way to do it in the terminal?" So I try shutdown, I have trouble with it, it proceeds to get hopelessly tangled up, and it looks like it's frozen up in mid-restart when I throw up my hands and decide to go for the old power-switch-for-five-seconds method after all. Now when I start the computer and select Ubuntu from GRUB, I get this:
[Code].....
I have registered a problem similar to the one reported in this thread: Solution to black screen problem in opensuse11.2 - openSUSE Forums
after installing openSUSE 11.2 from DVD, and rebooting the system a blank screen appears after booting process is completed.
Initially, I was thinking that was 'cause of the installation of ndiswrapper drivers (see command "modprobe ndiswrapper" not working - openSUSE Forums) but after the 4th (!) installation of openSUSE I really don't know what to think...
Sometimes openSuse boots regularly, and sometimes not... seems that there is no difference if I restart the PC or I turn it off and then off. Result is the same: sometimes I get the user desktop and sometimes not...
As explained in my previous post, I have checked the disk but all seems ok.
Now I cannot use the PC even in failsafe mode... I get always a black screen.
But what is more surprising is that I have 2 identical (identical!) PC with the identical hardware, and identical bios configuration. Only the monitor is different. Well, said that, one is working the the other one not...
To be honest, the working PC was an openSUSE 11.1 systems updated to openSUSE 11.2.
I think that must be something wrong on the distributed openSUSE DVD..
I have scoured the web the last few hours and I have come across a plethora of similar problems relating to Ubuntu and Nvidia drivers. However, I still havent found a sufficient cure for the problem.
The exact problem I face is that as soon as I install the Nvidia recommended drivers using the "Hardware Driver Manager", I restart the system but it never gets past the login splash screen. After I log in it simply goes to a black screen and sits like this indefinately.
Does anyone know of a particular fix for this problem? I am at the end of my tether and there is no way I can use Linux if it means either getting a different graphics driver or sitting on a 800*600 resolution. (Not to mention I dont have acclerated 3d support...so no DVD playing!)
I have a Nvidia GeForce4 MX graphics card and im a complete n00b to Linx so please go easy on the technical jargon.
When I start ubuntu I get a black screen, I can't do anything, this started when I installed the new driver for my graphics card. I don't know what to do. I have a i7 core (64-bit) and nvidia GTX 260 (twice).
View 3 Replies View RelatedI have installed ati drivers looking at this HOWTO ATI Installer HOWTO for openSUSE users
But after reboot i see only black screen....
My vga is ati hd4770. Looking for a full tutorial how install drivers (maybe with screens). Please help me.
With ubuntu/linux mint everything was working perfectly.
i have installed Ubuntu 10.10 and played around a bit and have got it booting into cli instead of the login screen. gnome is my default desktop environment but i wish to run kde along side to play around with. When i boot into kde using startx kde (usualy just using startx) all i get is a mouse, black background and a terminal screen.
View 9 Replies View RelatedI am trying to install 11.2 but it keeps freezing. I press install and the Linux kernal loads and afterwards I get a black screen and after 30 seconds the DVD player stops running. I have also tried to the online network install and the exact same thing happens. I also tried a DVD I have of 11.1 which I know is good since I have successfully installed it on other machines and the result is also the same. My computer currently has a dual boot of XP and Kubuntu 9.10.
I am returning to Suse after experimenting with Kubuntu but thought I would leave the Kubuntu on the machine (prefer Suse but Kubuntu installed very easily on my computer). Could the Kubuntu be causing this problem or is the difficulty something else? I have also tried the safe install and the other options to no success.
A few glitches aside, 11.2 has been very good. Today I installed realcrypt. While in yast, I noticed some other items were set to install. I accepted them along with realcrypt. After the install, clicking the -more applications- button (gnome) did not display the menu, just the mouse wait indicator. After a few tries, I decided to restart. Clicking shutdown did not present the normal menu, but instead instantly shutdown. On restart, I noticed 3-ish orphaned inode(?) messages. After boot completes I'm left with a black screen.I'm running 11.2 Gnome raid-1. The raid array appears to be fine. It emails status on boot, and I received those emails (via google) on the my laptop. I can boot to runlevel 1, so the question is, once there where do I look for cause / fix.
View 5 Replies View Related'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies View RelatedAfter succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View Relatedanother post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies View RelatedI recently upgrade from Lenny to Squeeze. My graphic card is nVidia Corporation G86 [GeForce 8400M GT] (rev a1). Using lenny latest drivers from nvidia worked fine. I installed nvidia drivers using Debian packages 195.36.31-6 and latest driver from nvidia site (260.19.36) and also other nvidia drivers. The problem is when I start gdm3 I saw nvidia logo but then when it loads gdm3 it shows gdm3 screen with lot of black pixels and other random pixels and then the screen freezes. And the only thing I can do is restart using [alt]+[sysrq]+b.
View 13 Replies View RelatedI'm running RHEL 5 on a dell server. Recently, after some updates were installed, the server hangs when trying to start the gui (its set to run level 5)to get into the login screen. I can boot into run level 3 but get the same issue when I startx. CTRL-ALT-BackSpace doesn't return me to the command prompt. I get a blank screen with two letters and a blinking cursor. Which direction or log files to look at to start the troubleshooting.
View 2 Replies View RelatedProblem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.