Ubuntu Installation :: Fresh Installing 10.10 Hangs With Black Screen
Dec 19, 2010
I'm trying to install Ubuntu 10.10 from a Live CD. I can get to the Menu where I get to choose "Try without installing","Install Ubuntu","Test Disk," etc.After hitting ANY of the options, it hangs on a black screen, sometimes with a cursor blinking in the upper left, sometimes not. From all the research I've been able to dig up it seems it's a graphics card issue, but I haven't been able to find anything exactly like my problem as most everything I've been able to find say's theirs continues to install but then causes problems later, or they're trying to load on a dual boot system. I can't seem to get past that first "Install Ubuntu" selection. As soon as I hit enter it goes black.
I'm wondering if I can't load the nvidia drivers from a command line before I attempt to install from the live CD, but I don't know how to do that. I have the .run file downloaded but don't know where to go from there.
View 9 Replies
ADVERTISEMENT
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
May 11, 2010
I downloaded and burned Ubuntu from ubuntu.com (64bit version) while in windows 7 64 i popped the install disc in, and it went into a setup in which it installed it asked to reboot, and I allowed. upon reboot boot I could choose either Windows or Ubuntu, so I picked ubuntu and off it went. It started to boot into the (Ubuntu) OS, it shows the little ubuntu thing, then the display goes black, like there is no signal to the monitor. The PC still runs, and reconizes when I plug in an iPhone or something, there is just a black screen though. I would like to know how to go about fixing this?
View 3 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Dec 8, 2009
Ok, I booted with the live cd and used Fdisk to delete all partitions and wipe the drive. I used the "Replace existing Linux system" install option and let it roll. So I reboot to the screen Flashing a _ then just black...System Info:GIGABYTE GA-EP45-UD3L LGA 775 Intel P45 ATX Intel Motherboard Intel Core 2 Quad Q6600 Kentsfield 2.4GHz 2 x 4MB L2 Cache LGA 775 Quad-Core Processor MSI R4850-T2D512 Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video CardSeagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard DriveKingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model KHX8500D2K2/2GRYes i did just copy my old newegg orders I'm brand new to fedora as well so I apologize if this a newb mistake.---------- Post added at 05:54 PM CST ---------- Previous post was at 03:41 PM CST ----------Update: I went and wiped the drive again and tried a different install method (use entire drive)After rebooting i spammed esc and got into grub and loaded fedora in nomodeset After going thro all the lisence and reg stuff it prompted me to log in, I did and once again im left with a black screen with a _
View 11 Replies
View Related
Nov 28, 2010
I installed Xubuntu (Karmic 9.10) several times on an old iMac G3 with powerpc processor. Previously I had installed versions as 6.06 and 6.10 succesfully. But no luck this time. All installs were succesfull if alternate cd's were used.
The problem is that when i boot up i see the bootloader 'yaboot' and after that shortly the mouse logo from Xubuntu. After that the screen turns black and the indication light from the powerbutton turns from green to orange, this means no signal (i guess).
I assume that my screen resolution is wrong and cannot be displayed, the Mac uses 1024x768 if i am right.
My question is : How to access any configuration file to change resolution as I believe is the problem?
Edit: Perhaps there is a way to access command line to change config files.. ? Or using a live CD, but this computer is low on memory and has a hard time using live-CD's.
View 1 Replies
View Related
May 1, 2010
After the upgrade from 9.10 to 10.04 resulted in a black screen after reboot, I decided to don't waste more time, backed up my data and made a fresh installation.
First Issue [solved]: After I inserted the Kubuntu 10.04 Live-CD and started the system, I got to the CD's boot-mode selection menu. When I selected "Install Kubuntu", I got the Kubuntu bootscreen, but the system hang up then. I was able to solve this problem through pressing F6 in the boot-mode selection menu and setting "nomodeset". I also had to remove "quit splash" from the boot-entry line. Afterwards the installation process was fine.
Second Issue: I wanted to boot my new installated system, but, off course, got the blank screen again. So I edited the Grub-entry for recovery mode in the grubmenu (replaced "quit splash" with "nomodeset") and booted into recovery mode. I selected "netroot", and installed the proprietary nvidia-drivers with "apt-get install nvidia-current". Afterwards I ran "nvidia-xconfig" to generate the xorg.conf. To solve the blank screen issue, I edited the /boot/grub/grub.cfg the same way I described above and rebooted. Now I don't get a blank screen anymore, but I also don't get an XServer. The system boots now (off course without splash and "unquit"), but drops me into the tty1... When I type "sudo service kdm start", I get into KDM and can login, but I get many errors and crash-reports there. I also don't have any internet. I only have internet when booting in recovery mode and select "netroot".
I'm a bit surprised that Ubuntu released a LTS-Version that causes so much trouble (I've searched the forum and it seems that I'm not the only one with such big problems). Has Ubuntu droped support for NVidia-users?
View 9 Replies
View Related
Nov 24, 2009
I installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.
View 9 Replies
View Related
Aug 20, 2010
I'm trying to install Ubuntu on an iMac G4, and I had a promising situation the first time through but I botched the install due to my newbishness and haven't been able to boot from the install CD since.
Here's the situation:
Hardware
800 Mhz G4
256 MB RAM
15" LCD display
32 MB GeForce2 MX Video Card
"Standard" Airport Wireless Card
(more details here)
What Happened: After poking around on the forums some and reading through some of the wiki pages, I decided that 8.04 would be a good place to start, so I downloaded and burned an install disc. My first attempt booted almost perfectly, but I confused the "booting from the CD" with "installed Ubuntu" (Iknow, I know...), and promptly rebooted back into OS X.
Since then, I've been unable to successfully boot from the CD. Using the 8.04 disc, I'm prompted for what style of install I'd like, and I feebly type "live," the ramdisk loads, and then the screen goes blank, reads "loading" in the upper left for a second, the optical drive whirs for a bit, and then everything hangs on a black screen with a white cursor in the upper left. I thought I might just be impatient, so I let it sit overnight, but there was no change in the situation.
I know this isn't much information to work with. Is there a way to enable a more robust boot description? Something that will let me know what's going on when the screen goes blank and the optical drive whirs?
View 4 Replies
View Related
Mar 25, 2011
I try to boot the live CD and try xubuntu without installing, and my computer just hangs at a black screen, cuts off, then goes black and repeats. I also tried just installing with nomodeset enabled and it seemed to install fine, but it did the same thing as it does with the live cd, GRUB wouldn't even load... the computers specs [URL]
View 3 Replies
View Related
May 18, 2011
I have an problem with login in to a fresh installed Ubuntu with the nvidia drivers (graphics card nvidia 210). So far I have installed Ubuntu 10.04, Ubuntu 10.10 and Unbuntu 11.04, they all seem to have the same problem. when I log in the screen goes black and the pc's hangs. I can switch to a terminal before I login and everything seems operational. I can login to Ubuntu with a fail save x session.
View 8 Replies
View Related
May 6, 2010
I'm running an Acer 1810Tz, dual boot with win7.Under 9.10 and Grub I had no boot issues, however I have just completed the upgrade to 10.04 and upgraded GRUB to GRUB2.Everything boots just fine into Ubuntu, and my GRUB menu looks right, but when I select the Windows 7 option, the machine just hangs with a black screen, white cursor top left. I'm sure this is a trivial problem, something overwritten that shouldn't have been perhaps, but I have no clue where to start.
View 6 Replies
View Related
Jan 10, 2010
I have a emachines et1331g-03w I am trying to install Ubuntu on. I have tried both 8.04 32-bit and 9.10 32-bit desktop versions. They both just go to a black screen and hang when you try to run from the cd or install. I have not tried the 64-bit version yet.
View 7 Replies
View Related
Nov 28, 2008
I'm a fairly new linux user and I seem to have a problem with ubuntu 8.10 after installing it.To make sure everything was working fine before i could do a dual installation, i ran the live cd and it worked like a charm.Everything works fine in the live cd....the internet, sound, graphic drivers (even the special effects seemed to be work fine)I thought wow...after having a bitter experience with Ubuntu 8.04 and 7.10 (I couldnt install those at all coz of driver issues and stuff) I thought this is it!So I used the wubi installer to install ubuntu in my D drive (I didnt wanna use C just to be safe as the primary OS is installed there). Gave it a healthy space of 15 gb. Finished the installation and the rebooted.I went inside Ubuntu which started doing its installation and copying of files and stuff. So far so good.....
And then once it finished its installation and copying of files (100 %), the screen went blank and i see a cursor blinking. I thought maybe its restarting and thats why it must be doing this.I wait for nearly 10 mins and nothings happening except for the cursor blinking on the black screen. I press the caps lock key to see if anything is processing. Nope. So i manually shut it down and then load ubuntu.It loads like 20-30%....rests for a while....and then it loads a bit (not completley)....after that it takes me to a command line asking me for my password and username.I enter those correctly. But it doesnt get me into the main GUI screen yet.
It shows me a lot of the this error msg:
-bash: /dev/null:Permission denied
I'm still in command line (or terminal to be precise). So i use 'startx' (something which i learned from my csci labs ) to start a new session. It showed signs of starting a new session (i can see the mouse pointer and stuff) and then poof....back to the command line again.So I shut it down and load it again in recovery mode. It shows signs of the same symptoms in the splash screen (going very slow after 20-30 % ) and then this time, before i'm asked for my username and password in the command line, it shows a lot of warnings: fake daemon running (or something like that) and i cant even use startx!So i didnt know what to do, uninstalled ubuntu and did a fresh installation (wubi and in the same D drive). Reboot. Install and copy files 100% and then a blank screen again with the dreaded cursor blinking. I still wait for about 10 mins and nothing yet happens. So I manually shut it down (again) and then load ubuntu and unsurprisingly i have the same problem as what i described before....doesnt load properly and i'm not able to come out of the terminal.
View 2 Replies
View Related
Jan 26, 2011
I am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.
View 3 Replies
View Related
Jan 26, 2011
I am running a dell poweredge 2600 in which i just now did a fresh install of Centos 5.5 KDE. The install went perfectly with no hiccups or errors. I reboot the server and centos dose its normal checking everything and giving a Green"OK" or Red"Error" and everything seems to be fine. I then get to a black screen with a X mouse cursor, i can move the cursor freely and i can turn the Num Lock key on and off and i can do a Ctrl+Alt+F5 and then reboot with a Ctrl+Alt+Del smoothly, but i just cant get the centos to boot up all the way into the GUI.
View 16 Replies
View Related
Mar 15, 2009
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
View 2 Replies
View Related
Mar 30, 2011
I'm on an HP Pavillion dv1000 laptop. I used a live CD to install Ubuntu 10.10 to an external USB hard drive. The install completed successfully, but after a reboot I am stuck on a black screen with a white cursor. Before that I see nothing but the initial HP startup screen. I am able to run the live CD without problems, and I have been running Ubuntu from a 4GB thumb drive (which I installed on using the same live CD that I used to install on my current external hard drive). I had no problems whatsoever running from the CD or thumb drive, so I can't figure out why the external hard drive would be so different.
View 7 Replies
View Related
Apr 1, 2010
I am trying to install ubuntu on my dekstop computer, i put in the cd it boots, i choose language, and when i get the menu where i can start ubuntu from cd, install it etc. Whatever option i press enter at, i am stuck at a black screen with a flashing white _ in left top corner.I am using an external usb dvd drive.i tried the same usb dvd drive at my laptop and the white _ was there for just some seconds and then ubuntu started doing what it should.
View 2 Replies
View Related
Jul 10, 2010
I've been wanting to switch to x64 to get the most out of my hardware, but I seem to have run into some problems... Over the past three days I've been working diligently at trying to figure out why when I try to install 10.04 x64 I get a black screen with a blinking cursor... I think it's deeper than I had initially thought. A look at what I've done:Since I thought it was just a graphics problem with Lucid, I tried changing the boot parameters. Here are some of the things I've tried (I'm sure I've tried more in my frantic periods where I just type things) to append after 'quiet splash'.I've now tried the 10.04 alternate disc, too. The same problem occurred... I tried 'nomodeset' and 'i915.modeset=0' but nothing's working. I'd really appreciate some help; ot seems like a lot of people have this issue. One other way I'm trying is to extract the ISO and add the kernel boot as an option in GRUB.I doubt it'll change anything, but it's worth a shot. This must be an nVidia problem...
View 1 Replies
View Related
Nov 24, 2015
System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.
This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).
My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.
Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.
View 6 Replies
View Related
Jun 12, 2010
I just installed 10.04 on an Acer 4736 laptop and was prompted for a software update of about 170 MB.
I went through with the update downloads and installation, got an error message of some packages not being found, and clicked on the "close" button on the dialogue to finish with the whole thing.
Now the Update Manager window with the grayed-out package updates didn't go away, and the cursor would always show the "busy" circle thing. I waited for a while, but nothing happened. I tried opening Firefox to check for anything about this on the net, but it wouldn't open.
So I left it alone, and it the screen went black (screensaver, I guess). When I tried to get back to the desktop, I couldn't. Screen wouldn't respond and it stayed black; no password prompt or anything.
Ctrl-Alt-Backspace wouldn't take me back to the login screen either.
View 3 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Nov 27, 2010
just installed 10.10 on my Sony Vaio F laptop. Here's my specs:Processor: Intel Core i7 720QM (1.6 GHz)Memory: 6 GB DDR3 (1333 MHZ)Graphics: NVIDIA GeForce 330M (1 GB VRAM)Hard Drive: 500 GB (7200 rpm)Native Resolution: 1920x1080I shrunk my Windows partition, installed Ubuntu on it's own partition with swap space, and mostly everything went fine. When I booted up, the resolution was set at something like 2048x1536, and it only displayed the top left corner of about 70% of the screen. When I changed to any other resolution, it looked really bad, and the whole screen still wasn't displayed.
Then something popped up telling me to install a driver for my graphics card, so I did, figuring it would fix the problem. When I booted and picked Ubuntu, I was stuck with a black screen. So I restarted and tried booting into safe mode. I got in, and it displayed the whole screen at 800x600. Still no luck in regular mode, however.
View 2 Replies
View Related
Mar 30, 2011
I'm running Ubuntu 10.10 on what used to be a windows vista. I bought me a new graphics card today so that I could run dual screen (GeForce210). I saw a guide at [URL] and I followed it.
I typed: sudo apt-get install nvidia-current
then I restarted my computer, once again as instructed I typed:
sudo nvidia-xconfig then logged out as instructed...
After I logged out the screen went black and I was not able to login. So I restarted my computer. Now when I turn on my computer I am getting this error and it's stopping at it.
fsck from util-linux-n/g 2.17.2
/dev/sda1: clean, 255658/294092280 files, 5031534/117616640 blocks
*starting apparmor profiles
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
*setting sensors limits
Starting GNUstep distributed object mapper: start-stop-daemon: unable to stat /usr/bin/gdomap/ (no such file or directory)
speech-dispatcher disabled: edit /etc/default/speech-dispatcher
*starting the winbind daemon winbind
It stops on this screen. I do not want to wipe it but I cannot get it started. I do have an external hard drive and at the moment I am using my Ubuntu disc to "try Ubuntu" I was going to try backing up everything I have but it will not let me access root because I am not logged on to that user, is there anything I can do to get pass this? I've called around and no one is willing to work on my computer since it is now running on Ubuntu 10.10
View 7 Replies
View Related
May 31, 2011
I try to install red hat linux and I connect the PC with serial port. I use hyper terminal as terminal. When the machine boot from DVD/CD, there is no text mode (simply graphic) screen come out. Just a strange/rubbish text come out? I also find it is hang when I install in text mode ..below is the hang screen
Code: Linux Plug and Play Support v.0.97 (c) Adam Belay
pnp:PNP ACPI init
pnp:PnP ACPI:found 5 devices
usbcore:registered new driver usbfs
usbcore:registered new driver hub
PCI: Using ACPI for IRQ routing
PCI:If a device doesn't work,try "pci=routeirq".If it helps ,post a report
NetLabel:Initializing
NetLabel:domain hash size=128
NetLabel:protocols = UNLABELED CIPSOv4
NetLabel:unlabeled traffic allowed by default
PCI:Ignore bogus resource 6 [0:0] of 0000:00:02.0
NET:Registered protocol family 2
View 9 Replies
View Related
Apr 7, 2010
I have registered a problem similar to the one reported in this thread: Solution to black screen problem in opensuse11.2 - openSUSE Forums
after installing openSUSE 11.2 from DVD, and rebooting the system a blank screen appears after booting process is completed.
Initially, I was thinking that was 'cause of the installation of ndiswrapper drivers (see command "modprobe ndiswrapper" not working - openSUSE Forums) but after the 4th (!) installation of openSUSE I really don't know what to think...
Sometimes openSuse boots regularly, and sometimes not... seems that there is no difference if I restart the PC or I turn it off and then off. Result is the same: sometimes I get the user desktop and sometimes not...
As explained in my previous post, I have checked the disk but all seems ok.
Now I cannot use the PC even in failsafe mode... I get always a black screen.
But what is more surprising is that I have 2 identical (identical!) PC with the identical hardware, and identical bios configuration. Only the monitor is different. Well, said that, one is working the the other one not...
To be honest, the working PC was an openSUSE 11.1 systems updated to openSUSE 11.2.
I think that must be something wrong on the distributed openSUSE DVD..
View 9 Replies
View Related
Aug 5, 2009
I have scoured the web the last few hours and I have come across a plethora of similar problems relating to Ubuntu and Nvidia drivers. However, I still havent found a sufficient cure for the problem.
The exact problem I face is that as soon as I install the Nvidia recommended drivers using the "Hardware Driver Manager", I restart the system but it never gets past the login splash screen. After I log in it simply goes to a black screen and sits like this indefinately.
Does anyone know of a particular fix for this problem? I am at the end of my tether and there is no way I can use Linux if it means either getting a different graphics driver or sitting on a 800*600 resolution. (Not to mention I dont have acclerated 3d support...so no DVD playing!)
I have a Nvidia GeForce4 MX graphics card and im a complete n00b to Linx so please go easy on the technical jargon.
View 3 Replies
View Related
Jan 8, 2010
When I start ubuntu I get a black screen, I can't do anything, this started when I installed the new driver for my graphics card. I don't know what to do. I have a i7 core (64-bit) and nvidia GTX 260 (twice).
View 3 Replies
View Related
Dec 10, 2010
I have installed ati drivers looking at this HOWTO ATI Installer HOWTO for openSUSE users
But after reboot i see only black screen....
My vga is ati hd4770. Looking for a full tutorial how install drivers (maybe with screens). Please help me.
With ubuntu/linux mint everything was working perfectly.
View 9 Replies
View Related
