Ubuntu :: Black Screen After Installing Graphics Driver?
Nov 27, 2010
just installed 10.10 on my Sony Vaio F laptop. Here's my specs:Processor: Intel Core i7 720QM (1.6 GHz)Memory: 6 GB DDR3 (1333 MHZ)Graphics: NVIDIA GeForce 330M (1 GB VRAM)Hard Drive: 500 GB (7200 rpm)Native Resolution: 1920x1080I shrunk my Windows partition, installed Ubuntu on it's own partition with swap space, and mostly everything went fine. When I booted up, the resolution was set at something like 2048x1536, and it only displayed the top left corner of about 70% of the screen. When I changed to any other resolution, it looked really bad, and the whole screen still wasn't displayed.
Then something popped up telling me to install a driver for my graphics card, so I did, figuring it would fix the problem. When I booted and picked Ubuntu, I was stuck with a black screen. So I restarted and tried booting into safe mode. I got in, and it displayed the whole screen at 800x600. Still no luck in regular mode, however.
View 2 Replies
ADVERTISEMENT
Aug 7, 2011
i cant install my graphics drivers. Everytime i do, i get a black screen of nothing on restart. I'm running ubuntu 10.10. here are my graphics cards.
[Code]...
View 1 Replies
View Related
Mar 30, 2011
I'm running Ubuntu 10.10 on what used to be a windows vista. I bought me a new graphics card today so that I could run dual screen (GeForce210). I saw a guide at [URL] and I followed it.
I typed: sudo apt-get install nvidia-current
then I restarted my computer, once again as instructed I typed:
sudo nvidia-xconfig then logged out as instructed...
After I logged out the screen went black and I was not able to login. So I restarted my computer. Now when I turn on my computer I am getting this error and it's stopping at it.
fsck from util-linux-n/g 2.17.2
/dev/sda1: clean, 255658/294092280 files, 5031534/117616640 blocks
*starting apparmor profiles
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
*setting sensors limits
Starting GNUstep distributed object mapper: start-stop-daemon: unable to stat /usr/bin/gdomap/ (no such file or directory)
speech-dispatcher disabled: edit /etc/default/speech-dispatcher
*starting the winbind daemon winbind
It stops on this screen. I do not want to wipe it but I cannot get it started. I do have an external hard drive and at the moment I am using my Ubuntu disc to "try Ubuntu" I was going to try backing up everything I have but it will not let me access root because I am not logged on to that user, is there anything I can do to get pass this? I've called around and no one is willing to work on my computer since it is now running on Ubuntu 10.10
View 7 Replies
View Related
Jan 8, 2010
When I start ubuntu I get a black screen, I can't do anything, this started when I installed the new driver for my graphics card. I don't know what to do. I have a i7 core (64-bit) and nvidia GTX 260 (twice).
View 3 Replies
View Related
Nov 20, 2010
I'm trying to run 10.10 off a USB. On one computer with a nice discrete AMD graphics card, the thing boots fine. On a Dell Latitude e6510 with Intel HD Graphics (the one that comes with a Core i7) I get to the boot screen, the initial text crawl, and then the screen blanks.
Now, I can hear the standard Ubuntu start up noise about 20 seconds later so I know everything is running, just the video driver is not.
I can not do a CD install or anything off the hard drive, only the USB. I'm wondering if anyone knows some edit you can do at the boot menu (using tab) to revert to some graphics safe mode.
View 4 Replies
View Related
May 1, 2010
Ubuntu has been crashing on boot. I used a recovery mode kernal and went into failsafe mode, upon which point a msgbox told me to switch to low graphics. Then Ubuntu looked completely normal and functional with no problems. To me - an Ubuntu amateur, it seems like a driver problem and that running in failsafe mode will have its setbacks.
View 9 Replies
View Related
May 30, 2010
The last few days I have had to reboot my Ubuntu-workstation when the screen suddenly goes black. After some seconds I get a pop-up with the message:
Ubuntu is running in low-graphics mode
There is some buttons that tells me I can do different things (like reconfiguration ) but whatever I do I end up loosing all windows I worked in earlier. And having to reboot to get back full resolution. I have not found any way to reproduce this behavior. It has happened after being logged in for several days and sometimes just after boot and login when I'm starting an xterm and in all time intervals in between the output of:
sudo lshw -C display
PCI (sysfs)
*-display
description: VGA compatible controller
product: 82G33/G31 Express Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 10
width: 32 bits
clock: 33MHz
capabilities: msi pm bus_master cap_list rom
configuration: driver=i915 latency=0 .....
View 6 Replies
View Related
Jun 3, 2010
Recently upgraded to 10.04 after countless problems w/ Karmic & already problems with Lucid! The screen sometimes suddenly goes black, then goes into low graphics mode, if I let it, thereby changing screen rez & unless I reboot, I am stuck in this mode. If I don't choose temporary low graphics mode, I must reboot. Many others seem to be experiencing the same problem yet have been offered no solution by the developers. So.
View 9 Replies
View Related
Jun 6, 2010
In effort to fix garbled text when scrolling I attempted to boot into safe graphics mode. I now get to the login screen, enter password and then go to black screen.
Kubuntu 10.04 upgrade
geforce FX5200 graphics card
2gb memory
AMD XP2800+
View 1 Replies
View Related
Dec 31, 2010
What happened was, i used sticonfig to attempt to OC my graphics card, it all seemed to work well, then i put some stress on the card and got a 'black-ish' screen. No matter i though i will boot into text mode (How do you do it normally? The only reason i could was because i crashed my system and could choose recovery mode to then choose text based) and change it back to default and it will all be fine, woo... But apparently you need to be in X server for that command to take effect. ****...........
How do i get into text mode from booting up?
How can i fix this?!
I have tried looking in BIOS but there is nothing there. Have i just fried my card? (It was close to max settings - although only on full load for like 1 second) Could booting up normally, and just 'going in blind' work, like opening up terminal with a hotkey and just entering the command from there....
Ubuntu 10.10
PowerColor Radeon HD 5870
Ati catalyst drivers installled
View 2 Replies
View Related
Mar 17, 2011
I use Intel HD Graphics and every time I run a game, it black-screens and I have to restart a thousand times before the game works and I can switch to windowed mode (restart once to do this).
lspci:
[alex@alex01 ~]$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) .....
I also use an HDMI cord (since computer has HDMI support) so this may be contributing to the problem. The same does not occur with my laptop, which runs Nvidia graphics and Ubuntu. I really want this to not happen so I can play my games instantly without restarting a million times. Some games have yet to work (AssaultCube mostly).
View 14 Replies
View Related
Jan 18, 2010
I just stupidly changed my graphics resolution in System - Preferences - Startup Manager, now i dont get a login window or anything just a black screen. I also disabled the splash but i assume this just gets rid of the ubuntu loading line thingy?
the weird thing is that the resolution was set to 640x800 or something like that in the Startup Manager as default and the laptop im using (an old Toshiba Amilo P4) supports 1024x768. the System - Preferences - Display menu wouldnt let me change any display settings which is why i was messing about here. I havent got any backed up x org file and only a live usb of super os/ubuntu - no cd or floppy drive.
View 1 Replies
View Related
Jul 8, 2010
I was trying to install drivers for my ati radeon 9550 and when i typed in the terminal this:
sudo apt-get update
sudo apt-get install libgl
i got:
W: GPG error: http://ppa.launchpad.net karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A9BF3BB4E5E17B5
a posle ove druge: Reading package lists... Done
Building dependency tree
[code]....
how do i add this repo to sources list and how do i install the public key?
View 1 Replies
View Related
Feb 5, 2011
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies
View Related
Jan 14, 2010
I have installed the latest debian on a dell optiplex gx260 which has a 82845G chipset and there are some strange problems.The system is configured with autologon as a standard user. Sometimes, after logging on, the screen goes black but if I connect to it with vnc, I get a working desktop. Yesterday I booted it without a display attached to it and now I cannot set it to the right screen resolution anymore (1440 x 900) which was working fine before.
I have googled and searh the forum but cannot find the right information. According to Intel, the latest driver should be in the distro but I cannot find any details about that (version/date). grep Driver /etc/X11/xorg.conf returns
[Code]....
View 15 Replies
View Related
Oct 3, 2010
I am having problems installing the graphics driver (from the Nvidia website) for my Nvidia Vanta card on Ubuntu 10.04. I disabled X via terminal and then I ran a Virtual Console. With the virtual console I ran the chmod command and the went through the installation. It did bring up a message with something about my distro not having a pre-configured script (or something like that) and asked me if I would like to continue anyway. I choose Yes and the installation failed.
View 2 Replies
View Related
Jun 18, 2011
I tried to install the 3D-accelerated proprietary graphics driver for my graphics card but it doesn't work.
I went to System > Administration > Hardware drivers.
It downloads but when trying to install I get an error that says: "SystemError: installArchives() failed"
lspci shows:
Code:
xavi@xavi-laptop:~$ lspci | grep VGA
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
xavi@xavi-laptop:~$
View 9 Replies
View Related
Dec 30, 2010
Just a little background I have a sony vaio VPCZ119X laptop and have been struggling to get all components working under linux especially the intel graphics. I saw that once I upgraded to the latest available kernel release which currently is 2.6.37 rc7. The intel graphics is working, but sometimes when I boot I get a blank/black screen but seems to be lit up. All other functions seem working so for example I am able to login etc just that I dont see anything on the screen.
I have tried the following so far to identify the issue or isolate it:
- Switching to the console screens has no effect, still the black / blank screen.
- Restarting the system does not always immediately get the screen working, sometimes it takes a couple of reboots before the screen is available
- I have a switchable graphics with nVidia I never get this problem when I use the nvidia driver
- I have tried closing the lid etc as suggested in the below post without any change in output, will try further as there are other options available as well The "Black Screen" on Boot I see one difference between both the Xorg log files but I am not able to reason out why this happens hence I will just supply the files here and try not to theorize.
Xorg.0.log - This was the log output when I got the X display working Xorg.o.log.old - This was the log output when the X display was black/blank Also to highlight that I am using the latest kernel release that is still being tested I guess so maybe it is also a bug in the kernel?
View 9 Replies
View Related
Jul 17, 2011
I'm using openSUSE 11.4 on a HP Pavilion laptop, and it was working fine until last week or so. A zypper update seems to have upgraded to a package with a nasty bug though: it now boots into a black screen, instead of showing kdm.And the only option after that is to forcefully shut down the machine;ither Ctrl+Alt+F1 nor Ctrl+Backspace nor Ctrl+Alt+Del does anything. Not sure if this means the kernel hangs,or just that X blocks all keyboard input as well.The issue with powering off with the hardware button is that I don't get full log files (especially kdm.log) so it's a bit hard to investigate...I have tried many things, here are the results:
* Default radeon driver + kdm = black screen
* nomodeset + radeonhd driver + kdm = black screen [driver doesn't support HD4200 anyway]
* nomodeset + radeon driver explicitely requested + kdm = black screen
[code]...
View 4 Replies
View Related
Apr 4, 2010
I have an old machine running Ubuntu 9.10 and XP.t is a P4 and Nvidia FX5200 card.Yesterday all of a sudden the screen started flashing black, the same type as when you install new graphics drivers and the resolution is changing. Only here it keeps happening over and over, the mouse isn't usable fully, the icons and menus are distorted, and I basically can't do anything.
I ended up reinstalling 9.10 and everything was working fine until I installed EnvyNG to get my nVidia drivers. It required a restart, and once I logged in the same thing started happening. So I said screw this, and installed 8.04. Yet even in 8.04, once I used EnvyNG to install the drivers, the same thing happened.A few other detailsP works fine, although one time a similar thing happened on XP (not as bad), and was fixed with a reboot.- This PC runs through a KVM switch, but I connected it directly and the same thing happens.I've found no help via Google. Sounds like a possible hardware problem, but it seems to work fine in XP and only acts up in Ubuntu once I install drivers.
View 7 Replies
View Related
May 26, 2010
I'm having no end of problems trying to get 10.04 onto my older Toshiba Satellite A50 laptop that I use as a spare laptop round the house. The laptop previously dual booted with XP and Xubuntu fine. I wanted to give Lubuntu a go to see if it's performance was better on this older hardware. When installing I got the black screen of death, and also got the same problem with the Xubuntu CD. Research pointed me in the way of this article: [URL] I was able to boot the Lubuntu Live CD using the instructions outlined in method A.
Once installed however I rebooted and Grub seemed to be knackered. Just sent me to a recovery console of which I had no idea what to do. As I could no longer boot into Windows either I reinstalled Xubuntu 9.10 and all was fine. I decided yesterday to give it another bash this time connecting to my wireless from the live cd hoping it would download an update to fix this problem. Nadda, Grub this time did show and I was able to boot into XP, but upon picking my Linux distro I now get an unrecognised device error with a long string of charachters and then it dumps be back into the grub menu, choosing the recovery mode version does the same thing.
View 6 Replies
View Related
Mar 6, 2010
I'm trying to install an external graphics adapter for dual-monitor setup, and according to the installation instructions, the driver is libdlo, which requires libusb v0.13. When I follow the installation instructions, I got an error saying I don't have libusb on my OpenSUSE 11.2. The exact installation instructions is as follows:
Prerequisites:
* Install a compatible libusb version (0.13)
* on ubuntu - "sudo apt-get install libusb"
* Plug in a compatible DisplayLink USB device
To start the build process, open a shell prompt (as the user who's home directory the libdlo is installed into) and change to the libdlo directory to run
$ ./configure
$ sudo make install
$ make check
Make check will do some basic drawing on the DisplayLink device. The 'sudo make install' step will have installed libdlo.h, the main header, in your local include directory, and libdlo in your local library.(The error message comes out at $ sudo make install).
I noticed it mentioned Ubuntu, does this mean that it will only work in Ubuntu and wont work in OpenSUSE? I'm not familiar with those commands in the instructions above, I can only guess them but don't really know what each line of the instruction does exactly. If libusb also applies to OpenSUSE, how can I get it installed on my system?
View 2 Replies
View Related
Jul 20, 2009
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies
View Related
Aug 3, 2010
Ever since the problem with Flash started up a few days ago, (Videos Lagging/jumpy/jerky horridly.) I decided to finally switch from 9.10 to 10.04...all was going well until a few minutes ago while I was browsing themes and running Konversation, the skin flickered black/green a few times then white vertical lines started appearing down from the top of the screen to about the middle, (Almost looked like the teeth on a haircomb). I had to then shutdown and restart. What id like to know is are the two connected (My earlier flash problem and this) or how I can fix it, so far it hasn't happened again but I'm starting to worry, I've never had problems with Ubuntu until a few weeks ago.
View 2 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
Feb 7, 2011
I've just installed Ubuntu 10.10 64-bit.
It came up saying I could install 2 proprietary drivers, one for my WiFi adapter (which works perfectly) and one for my graphics card - a Sapphire AIT Radeon HD 5770 1024MB GDDR5 PCI-Express Graphics Card. The driver is called ATI/AMD proprietary FGLRX graphics driver. Before installing this driver I was unable to have Extra Visual Effects in Appearances. However after installing (and restarting) the menu bars are now in a basic light gray mode, rather than the sleek Ubuntu black. - Although Extra Visual Effects does now work. I've tried rebooting, and I've had a look around in ATI "Catalyst Control Center" but nothing has worked so far.
Does anybody know what this windows mode is, how to change it back to normal and why it's doing it in the first place?
Below is a screenshot of my computer: [URL]
This is also the first time I've installed Ubuntu on my computer, and am keen for it to work.
View 2 Replies
View Related
Jan 25, 2010
After installing Ubuntu and seeing my resolution would only go to 800 x 600, I found this strange. A message popped up about the nVidia drivers I could downlaod that would enable me to do more so I did. I restarted and all was fine. Nice effects, high resolution. However, after going on XP, then going onto Ubuntu, the screen ahs gone black. The white Ubuntu logo can be seen for a while as it loads, but then the monitor goes completely blank as I hear the sound when the log-in screen appears.As I said in my title, it was the 185 driver
View 3 Replies
View Related
Apr 19, 2010
Got a problem with Ubuntu 9.10 and a Lenovo T400 with an ATI Radeon Mobility HD3400 and ATI drivers /ATI contol center. Whenever the laptop wakes up from power-saving mode, the screen goes black (with some jagged mulicolored lines).
View 2 Replies
View Related
Nov 29, 2010
I've been using ubuntu fine for a while when I decide to activate my nvidia graphics card.After rebooting, however, I hit nothing but a black screen. I've searched the nets and others have seemed to solve the problem after hitting alt+ctrl+f1/f2 and editing some files after that, but that doesn't work for me. Booting into recover console gives me nothing but a long stream of white words before it runs to --> done. and then it goes back to a black screen. Running from Live CD I can't access my ubuntu files.
View 3 Replies
View Related
Jan 29, 2011
I am making a switch over to Ubuntu from windows on one of my kids machines.It has a Nvidia video card, a g-force fx 440 i believe, or something like that.Anyway I just loaded up Ubuntu 10.10 and and it seems it does not recognize my video card. If i go tosystem>administration>Additional drivers, the dialog comes back with "No proprietary drivers are used on this system. Ok so now I go to Ubuntu Software center and search nvidia..... I get the option to installl Nvidia binary x.org driver (version 185), I do so
Now in the Additional drivers dialogue it tells me "this driver is active and currently in use". Awsome, Now when I click on Nvidia X Server settings under system>Administration I get the following dialogue."You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."If i do what that last message said, run sudo nvidia-xconfig in the terminal, It gives an error saying the xconfig file is not there, and it will create one. The next time I reboot Ubunut just shows a black dos like screen asking for username and password. If i put it in, it does nothing, I end up having to re-install ubuntu.
View 6 Replies
View Related
