At random times, natty crashes for no obvious reason. The desktop will freeze for about 3 seconds, and then everything goes black. But it seems that everything is still running, because I was able to hit ctrl-Alt-f1 and it worked. This has happened ever since I upgraded to natty yesterday, but is becoming more frequent
View 9 RepliesI have had Natty installed for sometime now, and this happened once or twice before where it crashes all of a sudden to a black screen with some text on it, but I don't think there is anything particularly useful in the text. The problem is, in the last couple of days this has happened quite a few times, which shows that something is wrong.
My Computer's Specs:
CPU: AMD Phenom X6 1090T 3.2 GHz
RAM: 8 GB
MB: Gigabyte GA-890GPA-UD3H
The screen of my years-old HP laptop (running Natty) freezes and eventually turns black. Ctrl-Alt-F# works to switch to the terminals. My fan is even louder than usual. I spend some time fooling around with ps and kill and shut down some of the most resource-consuming processes, which quiets the fan a bit, but tty7 still shows a black screen except for my mouse pointer.
I finally decide to shut it down altogether, but then I think to myself, "Self, you've used the power switch to shut down before in this situation, but shouldn't there be a more proper way to do it in the terminal?" So I try shutdown, I have trouble with it, it proceeds to get hopelessly tangled up, and it looks like it's frozen up in mid-restart when I throw up my hands and decide to go for the old power-switch-for-five-seconds method after all. Now when I start the computer and select Ubuntu from GRUB, I get this:
[Code].....
If you had or have a black screen or purple screen problem in Natty, add support by subscribing to this Launch Pad Bug: Xorg's HAL causes Purple Screen or Black Screen on GDM startup. [URL]
Through helping people with these problems in the Ubuntu Support Forum (Installations and Upgrades) and through this sticky: [URL] this bug (above) seems to be where this problem is originating. It affects this problem with all video hardware types. As I said in this bug report: "Normal users should not have to be highly skilled "techies" to manually bypass a broken part of a system to make a released distribution work during an install or distribution upgrade"
It has been a few days I'm struggling to install Kubuntu 10.10 on my computer. I started with the normal CD, burnt it and boot the computer. Halfway through the graphical installer, I got a black screen and system froze up. I tried several things (including running the installer with nomodest and single options) but didn't help.
Then I downloaded the alternate CD and started to install in the text mode. I could get passed installing the kernel and programs but right after adding a user/password, the text installer crashed with a black screen and system froze!
Now, I already have Windows 7 64 bits on this computer and have done all kinds of memory/hardware tests on it and it works fine. The CPU, GPU and the case is well ventilated so nothing is overheating. I also run heavy loads on Windows (MATLAB, Chess engine tournaments) for hours and hours and never had a crash. So I guess the hardware is fine.
Here are the specs of the system if it can help:
CPU: i7 950 GPU: ATI HD5870 (model Gigabyte GV-R587UD-1GD) RAM: 12 GB DDR-1666 Motherboard: Gigabyte GA-X58A-UD3R (rev. 2.0) Optical drive: Liteon ihbs112 USB Mouse and Keyboard
Windows is installed on a SSD and I have 2x 2.0TB hard disks for data. Kubunto, however was being installed on a separate and dedicated 200GB hard disk. During installation process I format and partition this drive. I didn't disconnect/disable the other drives. In BIOS, all SATA controllers are set to run in AHCI mode.
My primary suspect is the graphics card. However, why it would ever crash even in the text mode? Although it works fine in Windows even with heavy gaming so graphics card is itself stable.
I have a emachines et1331g-03w I am trying to install Ubuntu on. I have tried both 8.04 32-bit and 9.10 32-bit desktop versions. They both just go to a black screen and hang when you try to run from the cd or install. I have not tried the 64-bit version yet.
View 7 Replies View RelatedI tried booting up natty server on both a unetbootem usb flash drive install and on CD. I get the menu of options to install like Install Ubuntu Server, Install Ubuntu Server 9 expert install, Cloud, etc. Hitting install either the 1st or 2nd option leads to a black screen but not at a frozen state(I can still reboot with ctrl-alt-del). The server Im installing on is a ibm system-x rack with a single xeon and a raid5 already setup to be used for installation. Now Im back to using lucid 10.04.2 which I might consider upgrading through Update Manager since I cant get natty to boot correctly with a working display. Anyone having similar problems on Natty server stable release?Also as I post this, I dont see a ubuntu server prefix, maybe it should be added?
View 1 Replies View RelatedI played a bit with plasma widgets and every once in a while everything crashes, I see only black screen and have to restart. After restarting everything worked normal. I found some tutorials for opensuse, and started with some basic shortcuts, such as showing active windows and activities. Then I had black screen again (which I've come accustomed to) and restarted pc expecting everything will be just fine like it was after previous reboots.
But then I saw that all activities are identical and everything I worked on has been deleted. I found in activities window that I have 20 or more activities and I didn't know where they had come from. I am stuck and I didn't see any activity that will restore my desktops to original state, and in my searching through activities I also had a lot of black screens. I use opensuse 11.4 x64 and kde 4.6.
Got a new Lenovo T500, slapped 9.10 on it. Set of programmes is exactly as on my previous IBM T42, but every so often I get a random crash. No errors, just a complete freeze with a "underscore" cursor in the top-left of the screen.I think / suspect it may have something to do with Transmission running, or perhaps the recent kernel update to 2.6.31-17.Anyone else had anything similar? Maybe on a T400 or R60 / R61 / T60 / T61?
View 9 Replies View RelatedI am having a problem with my Core i5 system running Centos 5.5. The system will lock up with a black screen on occasion when launching X11 - this could happen at any time, from the install CD the first time it's being installed or trying a live CD, or the 3rd-10th time I launch startx from tty1 or sometimes just switching from tty1 to display0 or display1. When the crash occurs, sometimes the systems fans will all turn on loud, and the reset button becomes non-responsive. Other times the screen is black and it just sits there and I have to hard power off. There's nothing in /var/log/messages.
I tried a fix from an old post for 5.4 adding the option for "DDC" "false" in the xorg.conf file, and this did not help. I also ran all the system updates, no help.
The system is totally stable so long as I don't switch between ttys and X11 or launch new X11s (it's also stable under other OSs and has passed Memtest86+ 4).
Is this an instability with the Core i5 driver? The "Video Card" in the display options is set to "intel - Experimental modesetting driver for Intel Integrated Graphics Chipsets" - the "experimental" part is a little scary. Should I try setting the driver to "i810" as the 5.5 release notes recommends (again there's no onboard "chipset" this is an embedded graphics processor on the i5 CPU).
here's the getinfo.sh dump
--glen201
== BEGIN uname -rmi ==
2.6.18-194.11.1.el5 x86_64 x86_64
== END uname -rmi ==
[Code].....
What happens is, the program crashes for whatever reason (I don't know the exact cause, but the program terminates), and then immediately everything on my screen goes black. However, I still have a cursor, and all other programs that were running continue to run (I can access my other game servers from other computers). The cursor changes icons as I move it around the black screen, as though it is interacting with the programs that are still running. ctrl+alt+f2 still works, so at least I can restart the computer safely.
View 2 Replies View RelatedYesterday I upgraded to ubuntu 11.4 and since then firefox (4) doesn't get beyond starting and showing for maybe three seconds. Then it crashes and Mozilla Crash Reporter tells me mozilla are sorry
View 4 Replies View RelatedTrying to install ubuntu 11.04 drove me nuts until I found this page .
My system is an ASUS moderboard with an AMD chipset. The solution came when I entered the BIOS and disabled the cool&quiet feature for the chipset.
After installation, I have to keep cool&quiet disabled in order to run ubuntu. Re-enabling cool&quiet results in ramdon restarts or freezing
I got sick of unity yesterday and tried to install Gnome3. While doing this, i ran apt-get update. I believe that this updated my xorg to 1.1+ (or whatever) making it incompatible with the proprietary ATI drivers I'm running. So I tried a whole bunch of stuff, from reinstalling the drivers from the ttyl1 prompt, to doing startx from the command line and using synaptic to remove the proprietary drivers and install radeon, etc, etc.I think the issue right now is that there are bits of the proprietary driver left that are messing with the open source driver. Whenever I do startx, i get artifacting all over the screen, which never seems to go away.
View 8 Replies View RelatedI'm use ubuntu 8.10 ( on a msi 645 notebook ) and i'm trying to shutdown from grub. I have add these entries to menu.lst after the ### END AUTOMAGIC KERNEL LIST
title Halt
halt
I only get a black screen but the pc is still running someone said it only put grub to sleep or something. I also tried this commands sudo shutdown -h now or init 0, poweroff... but there all "unrecognized commands" in grub... Is there a possibilty to shutdown from grub.
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI am new to Linux but wanted to try it. I downloaded Ubuntu and burned the ISO to disc, I restarted my PC and the disc runs and seems to be loading, a purple screen appears with a small icon at the bottom, then the screen turns black and that is all, disc stops running and nothing else, am i doing something wrong here?
View 2 Replies View RelatedI just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.
View 9 Replies View RelatedI am trying to install 11.2 but it keeps freezing. I press install and the Linux kernal loads and afterwards I get a black screen and after 30 seconds the DVD player stops running. I have also tried to the online network install and the exact same thing happens. I also tried a DVD I have of 11.1 which I know is good since I have successfully installed it on other machines and the result is also the same. My computer currently has a dual boot of XP and Kubuntu 9.10.
I am returning to Suse after experimenting with Kubuntu but thought I would leave the Kubuntu on the machine (prefer Suse but Kubuntu installed very easily on my computer). Could the Kubuntu be causing this problem or is the difficulty something else? I have also tried the safe install and the other options to no success.
After doing a wubi install of 11.04 onto my hp g56-116a because of it having all 4 primary partitions in use, natty seems to be running abnormally slow Not throughout, but there's major slowdowns when doing something like opening a new browser window or similar task.
Sometimes it will just spontaneously log out. The slowdowns are so bad the mouse cursor will become completely unresponsive/laggy for 20-25 seconds. My laptop has 4GB RAM and an intel celeron t3500 cpu, which zips windows 7 along speedily, but its running this install a lot slower than my old laptop ran in,with 2GB RAM and a slightly slower processor.
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies View RelatedAfter succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View Relatedanother post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies View RelatedMy recently installed OS, keeps on displaying a GRUB menu instead of the normal screen and has an option of normal start up or ( I forgot what it's called but some sort of .. ) Fixing Option. It has worked before but yesterday the error wouldn't stop coming up after it randomly crashed while the computer was working. I haven't tried it again today, but will do soon. The first option of normal boot up said something like 0x01002 is in use and didn't load.
The second one occasionly came up with an option for normal boot after it had 'Fixed' it. But most times it would come up with some terminal like dialogue, then stop and not load, don't know if it crashed or what ? Hope this is enough information for you, but as I'm only 12, I don't have a clue what to do, except the obvious option of rebooting again and again.
I just installed Natty, its ok so far. How can I keep applications from launching full screen? I know if I resize the window below 75% or some thing like that it does not start full screen however I need the window to launch at like 85% and not full screen. This is the most frustrating thing I don't know what Canonical was thinking. I put it in if you have to however make it easy to undo..
View 2 Replies View RelatedI just upgraded to Natty on a (almost brand new) HP pavilion dm4t. I'm finding that it crashes pretty frequently, in a variety of ways that might or might not be related.
1) Sometimes (every 2-3 days) it will just blink out and go back to the login screen. This usually happens within a minute or so of logging in. If I log in again after this, it will usually crash again. A restart of the system typically will make the problem go away for at least a few sessions.
2) If I leave the computer on for a while, the screensaver will freeze and nothing can get me back to the desktop. Processes seem to still be running behind it (I left some music playing once and the music continued to play, but the screen was black and I couldn't get back to my desktop - I had to do a hard shutdown)
3) A perhaps unrelated problem, every ten sessions or so when I log in the indicator applet will be gone and an error telling me that indicator applet failed to load (or something to this effect)
Btw I'm using ubuntu classic rather than unity (just because I like it better). I haven't used Unity enough to know whether these problems also occur with it.
I just upgraded to 11.04 and I'm having problem with Totem.
When I load a movie it crashes, and prints this message to the terminal code...
I tried to remove and install it again but it wasn't fixed.
This problem did not occur in 10.10.
What can I do?
I have a older computer that i am trying to load ubuntu on it. I can put in the CD and restart the computer and the boot menu will pop up, I can click any of the options like install ubuntu or anything else but once i click it, it will take me the another screen where it will say loading... please wait then it goes away and i sit there looking at a black screen for 20 minutes while nothing happens. What is wrong why cant i install ubuntu, or anything else except for windows.
View 2 Replies View RelatedI just upgraded from Ubuntu 10.10 to Ubuntu 11.04 Natty Narwhal and now I've got a purple screen of death. The download and install process all went okay, but when I restarted the computer through the upgrade dialogue to complete the installation process the system never came back online. When I turn on my computer it goes through the standard boot screen (F2 and F12 options shown while it boots the HDD, ODD, and wireless modem), and then it goes to a purple Ubuntu screen and doesn't do anything at all. I let it sit like that for 30 minutes before turning off the power and trying to boot again, but the same thing happened. I can press CTRL-ALT-DEL and the system will reboot, but nothing I know to do will get me past the purple screen and the Ubuntu logo. DI'm using a Dell Studio 1 desktop computer. It's got a 2.5ghz Pentium processer, 4gb of RAM, and a 400gb HDD. I don't dual boot, and Ubuntu is the only OS installed.
View 6 Replies View Related