Ubuntu :: Black Screen After Running Apt-get Update?
Aug 2, 2011
I got sick of unity yesterday and tried to install Gnome3. While doing this, i ran apt-get update. I believe that this updated my xorg to 1.1+ (or whatever) making it incompatible with the proprietary ATI drivers I'm running. So I tried a whole bunch of stuff, from reinstalling the drivers from the ttyl1 prompt, to doing startx from the command line and using synaptic to remove the proprietary drivers and install radeon, etc, etc.I think the issue right now is that there are bits of the proprietary driver left that are messing with the open source driver. Whenever I do startx, i get artifacting all over the screen, which never seems to go away.
View 8 Replies
ADVERTISEMENT
Jul 5, 2010
What happens is, the program crashes for whatever reason (I don't know the exact cause, but the program terminates), and then immediately everything on my screen goes black. However, I still have a cursor, and all other programs that were running continue to run (I can access my other game servers from other computers). The cursor changes icons as I move it around the black screen, as though it is interacting with the programs that are still running. ctrl+alt+f2 still works, so at least I can restart the computer safely.
View 2 Replies
View Related
Jan 10, 2010
I have a emachines et1331g-03w I am trying to install Ubuntu on. I have tried both 8.04 32-bit and 9.10 32-bit desktop versions. They both just go to a black screen and hang when you try to run from the cd or install. I have not tried the 64-bit version yet.
View 7 Replies
View Related
Jan 29, 2011
I'm use ubuntu 8.10 ( on a msi 645 notebook ) and i'm trying to shutdown from grub. I have add these entries to menu.lst after the ### END AUTOMAGIC KERNEL LIST
title Halt
halt
I only get a black screen but the pc is still running someone said it only put grub to sleep or something. I also tried this commands sudo shutdown -h now or init 0, poweroff... but there all "unrecognized commands" in grub... Is there a possibilty to shutdown from grub.
View 6 Replies
View Related
Apr 29, 2011
At random times, natty crashes for no obvious reason. The desktop will freeze for about 3 seconds, and then everything goes black. But it seems that everything is still running, because I was able to hit ctrl-Alt-f1 and it worked. This has happened ever since I upgraded to natty yesterday, but is becoming more frequent
View 9 Replies
View Related
Apr 2, 2011
Did the update today and was setting up the NVidia drivers with the x config and rebooted sounds like it started but screen is black. Is there a way to undo the upgrade.
View 3 Replies
View Related
Feb 26, 2011
I am new to Linux but wanted to try it. I downloaded Ubuntu and burned the ISO to disc, I restarted my PC and the disc runs and seems to be loading, a purple screen appears with a small icon at the bottom, then the screen turns black and that is all, disc stops running and nothing else, am i doing something wrong here?
View 2 Replies
View Related
Jul 28, 2010
I just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.
View 9 Replies
View Related
Jul 28, 2011
The screen of my years-old HP laptop (running Natty) freezes and eventually turns black. Ctrl-Alt-F# works to switch to the terminals. My fan is even louder than usual. I spend some time fooling around with ps and kill and shut down some of the most resource-consuming processes, which quiets the fan a bit, but tty7 still shows a black screen except for my mouse pointer.
I finally decide to shut it down altogether, but then I think to myself, "Self, you've used the power switch to shut down before in this situation, but shouldn't there be a more proper way to do it in the terminal?" So I try shutdown, I have trouble with it, it proceeds to get hopelessly tangled up, and it looks like it's frozen up in mid-restart when I throw up my hands and decide to go for the old power-switch-for-five-seconds method after all. Now when I start the computer and select Ubuntu from GRUB, I get this:
[Code].....
View 9 Replies
View Related
Feb 11, 2010
I installed Karmic and the resolution was lower than I expected. I went to Admin and Drivers and the system stated I needed to activate the Nvidia driver. I did this and the system asked for a reboot.Now after Grub I get a black screen. I can hear things going on in the background and can even guess when to input my password, but all I see is a black screen.
View 1 Replies
View Related
Sep 2, 2010
Yesterday, 9/1/2010, I received a bunch of patch updates for 10.04 (64-bit) and applied them to my laptop (Dell Latitude E6510, Intel Core i5). After they applied, it asked me if I wanted to reboot now or later. I chose later to finish my work and then shut my laptop off. This morning, I turned it on, only to get a black screen during bootup and also during login. I know it's working behind the scenes because I can hear the drum sound when it's ready to login and I can still press the power button and hit enter to shut it down. I tried using Alt+F2->F12 but it would only show a black screen.
My temporary workaround was to hold the shift button during startup to get the grub menu and then select the older 2.6.32-23 kernel to bootup instead of the newer 2.6.32-24. I am able to boot ok in the older kernel and it's working fine, but I don't know what is causing the problem for the newer one and cannot boot into that one.
I believe I was running 2.6.32-24 fine up until I received a bundle of patches to apply to my system. So the question is, is there a way to figure out what patches were applied in yesterday's bundle so I can back them out? If not, how can I fix this so I can run the newer updated kernel?
View 4 Replies
View Related
Mar 17, 2011
After applying an update about two or three days ago, I restarted my system and now I'm getting a black screen at login. I can hear the brief drum sound clip that plays when the login dialog box pops up, but the screen is completely black and I can't see anything. I'm still able to access low graphics mode via the fail-safe option in the recovery mode menu. So far I've tried the following commands in the terminal:
Code:
sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
sudo apt-get install xserver-xorg-video-ati
sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-
core[code]....
View 9 Replies
View Related
Jul 24, 2009
I just did an update of my Fedora 11 machine, and it required a restart. After restart it will not try to boot up or even show a splash screen. The only thing I see is a black screen with a flashing white cursor.Any ideas on what I can check so I can boot up into Linux again.
View 14 Replies
View Related
May 10, 2010
I just updated from FC 10 to FC 12 via install/upgrade disk, and when re-booted the screen is then black (at the point that it should display logins). I think it may be due to nvidia driver in FC 10 not being upgraded, because I think I compiled it from nvidia rather from yum install. Anybody else have this problem? BTW, it is a dual boot with Win XP, but has never caused a similar problem before.
View 8 Replies
View Related
Sep 1, 2010
yesterday I updated the system, and that involved kernel 2.6.34.6-47.fc13.x86_64. After rebooting, the progress bar goes fine, but when finished the screen flickers a little and goes black. I can't switch to other terminals via Ctrl + Alt + Fx, so I'm using remote access via ssh. I thought it could be nvidia issue, so I updated kmod modules with rpmfusion-nonfree-updates-testing, and when booting nothing complains, but I'm still getting black screen. Xorg log doesn't seems to complain (no errors (EE)).
View 14 Replies
View Related
Jun 30, 2010
I have just installed the latest update for Ubuntu 10.04, however upon requested restart i now boot to a black screen. the boot sequence is system post, followed by the generic Purple UBUNTU loading screen, following that you just get a black screen.
AMD x64
4Gb RAM
120GB Intel SSD
ATI RAIDON 3650
View 7 Replies
View Related
Sep 2, 2010
My Machine: Lenovo T400 laptop, 9.04 ubuntu
My problem: while working on my laptop the system Offered an update to my ATI video card............so being the nube that I am I said go ahead and install it............yep that f'd it up. it ran for a while then froze up to the point I had to hard boot the machine. on restart the desktop splash/load screen displays but nothing else afterwards. I can get into restore mode and even terminal but can't seem to find anything........there is an autofix video option but that did not work either.
I spent a week loading and configuring this thing and do not want to start back from scratch...........I have too much stuff to lose on a new install. funny thing is that I just had set the system to do a complete backup of the ubuntu instance for tonight so I would have some way to restore this if something happened...........well it happend before the backup ran tonight........go figure.
Is there a way to reload the default system without loosing my files and such? I would just have to load vmware back on and some other programs but I a okay with that.
View 6 Replies
View Related
Sep 3, 2010
I have Ubuntu 10.04 installed on dell inspiron 5150. Original installation was perfect. Wireless Internet worked right away. Screen resolution was perfect. One day, after a month or so, after original installation I got a notification that new updates are available. So, I installed all updates. At the end there was a notification: Update is successful, please reboot. After reboot I got a black screen with the header:
GNU GRUB version 1.98-1ubuntu7(I hope it's not a ubuntu version of windows blue death screen). I could install 10.04 from scratch, but I can not do it after every update.
View 1 Replies
View Related
May 3, 2011
I tried to update my main computer from Ubuntu 10.0 to 11.04. I wish I could remember what it said, but it crashed during the update. The lights on the keyboard were flashing on and off as well. When I try to boot, all I get is a black screen and flashing lights. The Ubuntu recover also has the same thing. I am going to try a fresh install. For some reason I am leaning to the power manager, but I am no where near sure.
View 2 Replies
View Related
Jan 17, 2010
I am trying to install 11.2 but it keeps freezing. I press install and the Linux kernal loads and afterwards I get a black screen and after 30 seconds the DVD player stops running. I have also tried to the online network install and the exact same thing happens. I also tried a DVD I have of 11.1 which I know is good since I have successfully installed it on other machines and the result is also the same. My computer currently has a dual boot of XP and Kubuntu 9.10.
I am returning to Suse after experimenting with Kubuntu but thought I would leave the Kubuntu on the machine (prefer Suse but Kubuntu installed very easily on my computer). Could the Kubuntu be causing this problem or is the difficulty something else? I have also tried the safe install and the other options to no success.
View 9 Replies
View Related
Jun 25, 2009
I should have know, it's named after a windows "feature".On my laptop (Acer Aspire 5310) Fedora 10 offered me an automatic update to Fedora 11. Because I trust any automatic update Fedora brings to me (it's tested right) I automatically pressed yes. It started some downloads and everything seems to run pretty smooth. Then I had to reboot the computer, press that button as well.... and it reboots into Fedora 10 (untill the end of the bar). After that I have no clue what happens, because before X is started I get a black screen with nothing on it, even ESC doesn't do anything :O I don't even get the "_" to indicate the laptop is doing anything.
View 3 Replies
View Related
Feb 1, 2010
I just rebooted from an yum update, which updated my kernel 2.6.31-something to kernel 2.6.32-whatever-is-up-to-date-in-testing. My disk layout was LVM2+encrypted root. When I rebooted it prompted me for the encryption password as always. After I entered the correct password the loading screen (progress bar) finishes up as usual. Then, the screen is black.
It just stays in console resolution, but its just black. No typing, no chars, no X-mode, no errors, no VT-switches, nothing... just black. I remember to have started at 2.6.27-something and never had to kernel-update problems, so I dont know why it's annoying me now with todays update. I cant work with the machine any more.
View 4 Replies
View Related
Jul 20, 2011
I've got a problem with my Ubuntu Server 11.04 amd64, I think the problem comes from GRUB 2. Here is my problem : I updated my server and I now have Linux 2.6.38-10-server (in addition to 2.6.38-8) and, when I try to boot on version "10", I think I have a Kernel Panic because the screen keeps black and there is no use of the HDD (I can ear it working with version "8"). I also looked at /boot/grub/grub.cfg and I didn't saw any diference between the lines for v10 and those for v8 (except for "8">"10" of course).
I tried with Recovery Mode too, with this result : Loading Linux 2.6.38-10-server... Loading initial ramdisk...
> No use of the HDD (I don't ear it), and it's "frozen", can't do anyting but reboot it by ACPI (nothing happend when hitting "Num Lock") Another question : can we have no submenus in Grub2?
View 9 Replies
View Related
Dec 20, 2010
So I'm pretty awful at keeping Debian up to date, I guess. I'm using cron-apt to fetch updates every night, then apply them whenever I get around to it. Well, I neglected that last part for a month or two, and after some routine downtime to clear the case of dust, I decided it was time to upgrade. So I ran the command, everything checked out fine, and I was on my merry way. Until a half-hour ago when I accidentally shutdown the computer (I use the same zsh prompt on each computer, so I got them confused.) I turned it back on, only to be greeted with a black screen after all the services started up.
Everything works: ircd, MPD, etc. EXCEPT, of course, X. At first I thought the update broke SLIM, but after checking htop and doing a killall slim, it doesn't appear to be running (the screen remains black.) I hit Control-Alt-f2 to get to get back to a terminal, then tried doing startx, which freezes the computer entirely. All the network services stop, I can't SSH in, etc. It's dead. If I'm not mistaken, Xorg.0.log should say something, but I'm not a huge expert on it. The last line isn't an error, I can tell you that. So what's the deal here? apt-get remove xorg and start over?
View 1 Replies
View Related
Mar 12, 2009
Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
View 2 Replies
View Related
Feb 23, 2010
I'm new to Fedora! My problem is this, I was updating Fedora using yum, the updates were in the process of installing when I got up and tripped over my power cord and of course cut power to my computer killing it and interrupting the installation. I plug my computer back in and boot it back up. I make it to the blue Fedora loading screen with the blank Fedora symbol that fills with white while loading; loads fine but before the user login screen appear Fedora melts down. The screen goes black, the cursor appears with the circle loading timer, and some form of terminal is there were I can enter text but no commands like SU or whatever seems to work.
View 4 Replies
View Related
Mar 3, 2011
Today brought some new updates. I did the updates and while not required I did a restart. Then it goes to a black screen with a solid white line in the top left corner (flashing). It does not boot. I held down the power button to shutdown. When I press the power button, I get the Dell splash screen, then it goes to a black screen with a solid white line in the top left corner (flashing). Nothing like this has happened before
View 9 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Dec 8, 2010
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies
View Related
