Ubuntu Installation :: Black Screen When Installing X64 Ubuntu
Jul 10, 2010
I've been wanting to switch to x64 to get the most out of my hardware, but I seem to have run into some problems... Over the past three days I've been working diligently at trying to figure out why when I try to install 10.04 x64 I get a black screen with a blinking cursor... I think it's deeper than I had initially thought. A look at what I've done:Since I thought it was just a graphics problem with Lucid, I tried changing the boot parameters. Here are some of the things I've tried (I'm sure I've tried more in my frantic periods where I just type things) to append after 'quiet splash'.I've now tried the 10.04 alternate disc, too. The same problem occurred... I tried 'nomodeset' and 'i915.modeset=0' but nothing's working. I'd really appreciate some help; ot seems like a lot of people have this issue. One other way I'm trying is to extract the ISO and add the kernel boot as an option in GRUB.I doubt it'll change anything, but it's worth a shot. This must be an nVidia problem...
I have a emachines et1331g-03w I am trying to install Ubuntu on. I have tried both 8.04 32-bit and 9.10 32-bit desktop versions. They both just go to a black screen and hang when you try to run from the cd or install. I have not tried the 64-bit version yet.
I'm trying to install Ubuntu 10.10 from a Live CD. I can get to the Menu where I get to choose "Try without installing","Install Ubuntu","Test Disk," etc.After hitting ANY of the options, it hangs on a black screen, sometimes with a cursor blinking in the upper left, sometimes not. From all the research I've been able to dig up it seems it's a graphics card issue, but I haven't been able to find anything exactly like my problem as most everything I've been able to find say's theirs continues to install but then causes problems later, or they're trying to load on a dual boot system. I can't seem to get past that first "Install Ubuntu" selection. As soon as I hit enter it goes black.
I'm wondering if I can't load the nvidia drivers from a command line before I attempt to install from the live CD, but I don't know how to do that. I have the .run file downloaded but don't know where to go from there.
I'm a fairly new linux user and I seem to have a problem with ubuntu 8.10 after installing it.To make sure everything was working fine before i could do a dual installation, i ran the live cd and it worked like a charm.Everything works fine in the live cd....the internet, sound, graphic drivers (even the special effects seemed to be work fine)I thought wow...after having a bitter experience with Ubuntu 8.04 and 7.10 (I couldnt install those at all coz of driver issues and stuff) I thought this is it!So I used the wubi installer to install ubuntu in my D drive (I didnt wanna use C just to be safe as the primary OS is installed there). Gave it a healthy space of 15 gb. Finished the installation and the rebooted.I went inside Ubuntu which started doing its installation and copying of files and stuff. So far so good.....
And then once it finished its installation and copying of files (100 %), the screen went blank and i see a cursor blinking. I thought maybe its restarting and thats why it must be doing this.I wait for nearly 10 mins and nothings happening except for the cursor blinking on the black screen. I press the caps lock key to see if anything is processing. Nope. So i manually shut it down and then load ubuntu.It loads like 20-30%....rests for a while....and then it loads a bit (not completley)....after that it takes me to a command line asking me for my password and username.I enter those correctly. But it doesnt get me into the main GUI screen yet.
It shows me a lot of the this error msg: -bash: /dev/null:Permission denied
I'm still in command line (or terminal to be precise). So i use 'startx' (something which i learned from my csci labs ) to start a new session. It showed signs of starting a new session (i can see the mouse pointer and stuff) and then poof....back to the command line again.So I shut it down and load it again in recovery mode. It shows signs of the same symptoms in the splash screen (going very slow after 20-30 % ) and then this time, before i'm asked for my username and password in the command line, it shows a lot of warnings: fake daemon running (or something like that) and i cant even use startx!So i didnt know what to do, uninstalled ubuntu and did a fresh installation (wubi and in the same D drive). Reboot. Install and copy files 100% and then a blank screen again with the dreaded cursor blinking. I still wait for about 10 mins and nothing yet happens. So I manually shut it down (again) and then load ubuntu and unsurprisingly i have the same problem as what i described before....doesnt load properly and i'm not able to come out of the terminal.
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
I am trying to install ubuntu on my dekstop computer, i put in the cd it boots, i choose language, and when i get the menu where i can start ubuntu from cd, install it etc. Whatever option i press enter at, i am stuck at a black screen with a flashing white _ in left top corner.I am using an external usb dvd drive.i tried the same usb dvd drive at my laptop and the white _ was there for just some seconds and then ubuntu started doing what it should.
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
just installed 10.10 on my Sony Vaio F laptop. Here's my specs:Processor: Intel Core i7 720QM (1.6 GHz)Memory: 6 GB DDR3 (1333 MHZ)Graphics: NVIDIA GeForce 330M (1 GB VRAM)Hard Drive: 500 GB (7200 rpm)Native Resolution: 1920x1080I shrunk my Windows partition, installed Ubuntu on it's own partition with swap space, and mostly everything went fine. When I booted up, the resolution was set at something like 2048x1536, and it only displayed the top left corner of about 70% of the screen. When I changed to any other resolution, it looked really bad, and the whole screen still wasn't displayed.
Then something popped up telling me to install a driver for my graphics card, so I did, figuring it would fix the problem. When I booted and picked Ubuntu, I was stuck with a black screen. So I restarted and tried booting into safe mode. I got in, and it displayed the whole screen at 800x600. Still no luck in regular mode, however.
I'm running Ubuntu 10.10 on what used to be a windows vista. I bought me a new graphics card today so that I could run dual screen (GeForce210). I saw a guide at [URL] and I followed it.
I typed: sudo apt-get install nvidia-current then I restarted my computer, once again as instructed I typed: sudo nvidia-xconfig then logged out as instructed...
After I logged out the screen went black and I was not able to login. So I restarted my computer. Now when I turn on my computer I am getting this error and it's stopping at it.
fsck from util-linux-n/g 2.17.2 /dev/sda1: clean, 255658/294092280 files, 5031534/117616640 blocks *starting apparmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox *setting sensors limits Starting GNUstep distributed object mapper: start-stop-daemon: unable to stat /usr/bin/gdomap/ (no such file or directory) speech-dispatcher disabled: edit /etc/default/speech-dispatcher *starting the winbind daemon winbind
It stops on this screen. I do not want to wipe it but I cannot get it started. I do have an external hard drive and at the moment I am using my Ubuntu disc to "try Ubuntu" I was going to try backing up everything I have but it will not let me access root because I am not logged on to that user, is there anything I can do to get pass this? I've called around and no one is willing to work on my computer since it is now running on Ubuntu 10.10
I have scoured the web the last few hours and I have come across a plethora of similar problems relating to Ubuntu and Nvidia drivers. However, I still havent found a sufficient cure for the problem.
The exact problem I face is that as soon as I install the Nvidia recommended drivers using the "Hardware Driver Manager", I restart the system but it never gets past the login splash screen. After I log in it simply goes to a black screen and sits like this indefinately.
Does anyone know of a particular fix for this problem? I am at the end of my tether and there is no way I can use Linux if it means either getting a different graphics driver or sitting on a 800*600 resolution. (Not to mention I dont have acclerated 3d support...so no DVD playing!)
I have a Nvidia GeForce4 MX graphics card and im a complete n00b to Linx so please go easy on the technical jargon.
When I start ubuntu I get a black screen, I can't do anything, this started when I installed the new driver for my graphics card. I don't know what to do. I have a i7 core (64-bit) and nvidia GTX 260 (twice).
i have installed Ubuntu 10.10 and played around a bit and have got it booting into cli instead of the login screen. gnome is my default desktop environment but i wish to run kde along side to play around with. When i boot into kde using startx kde (usualy just using startx) all i get is a mouse, black background and a terminal screen.
I have registered a problem similar to the one reported in this thread: Solution to black screen problem in opensuse11.2 - openSUSE Forums after installing openSUSE 11.2 from DVD, and rebooting the system a blank screen appears after booting process is completed.
Initially, I was thinking that was 'cause of the installation of ndiswrapper drivers (see command "modprobe ndiswrapper" not working - openSUSE Forums) but after the 4th (!) installation of openSUSE I really don't know what to think...
Sometimes openSuse boots regularly, and sometimes not... seems that there is no difference if I restart the PC or I turn it off and then off. Result is the same: sometimes I get the user desktop and sometimes not...
As explained in my previous post, I have checked the disk but all seems ok. Now I cannot use the PC even in failsafe mode... I get always a black screen. But what is more surprising is that I have 2 identical (identical!) PC with the identical hardware, and identical bios configuration. Only the monitor is different. Well, said that, one is working the the other one not... To be honest, the working PC was an openSUSE 11.1 systems updated to openSUSE 11.2.
I think that must be something wrong on the distributed openSUSE DVD..
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
A few glitches aside, 11.2 has been very good. Today I installed realcrypt. While in yast, I noticed some other items were set to install. I accepted them along with realcrypt. After the install, clicking the -more applications- button (gnome) did not display the menu, just the mouse wait indicator. After a few tries, I decided to restart. Clicking shutdown did not present the normal menu, but instead instantly shutdown. On restart, I noticed 3-ish orphaned inode(?) messages. After boot completes I'm left with a black screen.I'm running 11.2 Gnome raid-1. The raid array appears to be fine. It emails status on boot, and I received those emails (via google) on the my laptop. I can boot to runlevel 1, so the question is, once there where do I look for cause / fix.
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e, 4 gig of corsair dual ram, ati 4850 graphics, onboard audio. ahci mode win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2, i had this configuration running fine for 2 months without boot loaders, on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
I recently upgrade from Lenny to Squeeze. My graphic card is nVidia Corporation G86 [GeForce 8400M GT] (rev a1). Using lenny latest drivers from nvidia worked fine. I installed nvidia drivers using Debian packages 195.36.31-6 and latest driver from nvidia site (260.19.36) and also other nvidia drivers. The problem is when I start gdm3 I saw nvidia logo but then when it loads gdm3 it shows gdm3 screen with lot of black pixels and other random pixels and then the screen freezes. And the only thing I can do is restart using [alt]+[sysrq]+b.
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
I have downloaded Last version of Ubuntu 11.04 and installed it. The installation went correctly with some flickering in display during installation. But the real problem starts after installation, when I turn on my PC and select Ubuntu from GRUB, the screen flickered a lot and then went black and PC got hanged.
I have spent the better part of 2 days perusing these forums for assistance. Here is the short story:I run a 7 year old custom build with a 82865G Intel Chipset and a NVIDIA FX5200 graphics card. Had been running a sluggish XP and after adding 2GB of fresh RAM wished to start fresh with my old friend, Ubuntu.
I've tried 10.04 LTS with and without my NVIDIA card installed with no luck. I have successfully installed 10.04 using the alternate install, but this also goes to black. I can hold shift to see GRUB and play around there, but no luck so far. I've also tried 9.10 but have not gotten past the pulsing Ubuntu image. I've seen plenty of support for NVDIA and Intel onboard graphics chips suggesting boot commands like nomodeset and i9015.modeset=0/1...it's all falling short.
I'm heavily leaning towards just installing an earlier LTS or a different linux distro all together. If there no one can help me debug, maybe someone can suggest a distro that will make me happy.
I've installed ubuntu 10.04 onto my Dell Latitude e6510 (through the wubi installer), but I can't get anything except a black screen. I'm pretty new to ubuntu, but after a bit of looking around at graphics issues I found a bunch of boot parameters and tried different combinations of them. i915.modeset=0 Gave me the purple loading screen, until the screen went black and I got flashing caps lock and scroll lock lights.xforcevesa gave me a completely black screen -- not receiving power at all
I also tried noapci, acpi=off, irqpoll, and pci=routeirq as parameters. None of those had any success.I've also tried letting ubuntu boot with a black screen until I heard the African drums and pressing Ctrl+Alt+F1 to go into the console, but the screen stayed black then as well.
After the upgrade from 9.10 to 10.04 resulted in a black screen after reboot, I decided to don't waste more time, backed up my data and made a fresh installation.
First Issue [solved]: After I inserted the Kubuntu 10.04 Live-CD and started the system, I got to the CD's boot-mode selection menu. When I selected "Install Kubuntu", I got the Kubuntu bootscreen, but the system hang up then. I was able to solve this problem through pressing F6 in the boot-mode selection menu and setting "nomodeset". I also had to remove "quit splash" from the boot-entry line. Afterwards the installation process was fine.
Second Issue: I wanted to boot my new installated system, but, off course, got the blank screen again. So I edited the Grub-entry for recovery mode in the grubmenu (replaced "quit splash" with "nomodeset") and booted into recovery mode. I selected "netroot", and installed the proprietary nvidia-drivers with "apt-get install nvidia-current". Afterwards I ran "nvidia-xconfig" to generate the xorg.conf. To solve the blank screen issue, I edited the /boot/grub/grub.cfg the same way I described above and rebooted. Now I don't get a blank screen anymore, but I also don't get an XServer. The system boots now (off course without splash and "unquit"), but drops me into the tty1... When I type "sudo service kdm start", I get into KDM and can login, but I get many errors and crash-reports there. I also don't have any internet. I only have internet when booting in recovery mode and select "netroot".
I'm a bit surprised that Ubuntu released a LTS-Version that causes so much trouble (I've searched the forum and it seems that I'm not the only one with such big problems). Has Ubuntu droped support for NVidia-users?
I tried to install Ubuntu 9.10 on one of them by default installation. For the moment there is only one user declared. The installation seems OK, except that Ubuntu didn't find my PPPoE connexion. When I logged in, I got a blank screen with the mouse cursor (it moved, but when I left or right-clicked nothing happened) and on the left something looking like two 1-pixel wide menus, as if the system had understood there were a dual screen. These menus could roll and unroll, and I think I even once managed to shutdown by going to the last invisible item thanks to the keyboard arrows (I'm not sure, because I had also clicked on ctrl+alt+suppr, so it could be a delayed effect of that).
I restarted the computer several times, to get no more than that. When I'm in Gnome safe, everything is OK but I don't have any root privilege there (I guess it's normal): for instance, I can't set up the internet connexion. My 20" 4/3 Philips screen is recognized. Then I changed the screen frequency: it's still OK for Gnome safe session, but now, in the Gnome normal session, instead of a black screen with 1-pixel wide menu, I get a black background picture with white light coming from above and reflecting to an otherwise invisible floor. The mouse cursor is moving, but this is the only thing which works.
Last weekend, I upgraded my old PC and installed Ubuntu 9.10 on a brand new pc. It worked perfectly for 5 days. When I got home tonight, it wouldn't boot and got stuck on a black screen.
[Code]...
I really am a newby here but I think that the blkid command gives me my uuid. The uuid in the /dev/disk/by-uuid directory is in blue so I'm guessing that this is a symbolic link. And then, when I try to create a symbolic link with the ln command, it already exists... But the issue is that the UUID that is referenced in the error displayed is not the same as the UUID in my /dev/disk/by-uuid directory.
So I decided to upgrade from 9.04 to 9.10 today, I was quite sure there wouldn't be no problems. Well, at least not in the installation, and apparently the system works well too, but there's just one thing...When I boot to the new kernel (2.6.31-19), it does show the new white Ubuntu-logo, but after it's gone, some text flashes through extremely fast, and after that the screen turns black, having two small and white horizontal lines on top of the screen. Soon after this, I can hear the login-window sound. I can log in by pressing enter, and then typing my password, and soon after I press enter again, I can hear the login sound. But still, the screen is black, having those same white horizontal lines on top of the screen, making the use of computer "quite" hard.Right now I'm using the older kernel, but the problem is that the sounds won't work, the resolution is still low like when I had 9.04 (problems with Intel hardware), and CD's won't still be read when inserted into the CD-drive.Here's my "lspci" in case someone wants to know of my hardware a little:
I just Installed Ubuntu on my PC (win XP-pro) using wubi, by downloading the .iso from webpage and burned it to cd. The installation went fine, but when I login the screen goes black. I can still see my mouse pointer and one vertical pixel line of the desktop. Could it be the graphics drivers, if so how can I update/change them, via rebooting in safe mode and using command line?
