I have insatalled Kubuntu using wubi (in windows). But when I am running Kubuntu it is showing the following error.
try(hd0,0) : FAT16 : NO WUBLDIR
try(hd0,1) : NTFS35 : NO wubldir
try(hd0,3) : NTFS35 :
What should I do???
today i've installed kubuntu with wubi for windows 7 on my hp pavilion dv6 with processor Intel Core i7 Q720 @1.60GHz with 4 Gb of RAM @ 64bit with NVIDIA Geforce GT 230M but i've had some problems.Infact the system continued to freeze after some minutes due to overheating so i restarted the computer and the Bios told me that to prevent damage to internal components the computer has been freezed. I repeated the process and i checked out the temperature with the desktop widget and it actually reached after some minutes 80-85� C so i cleaned the computer and the temperature turned back to normal (50-60�C) but the problem continued to exist! After several minutes the computer freezed again and the BIOS told me the same things he told me before (90� and computer freezed due to prevent damage for overheating).
View 1 Replies View RelatedOn my MS Vista 64bit machine, I installed Ubuntu through WUBI (some time in 2010) and was happily booting one or the other as needed. Then I added kubuntu-desktop (using Synaptic).Now, when I reboot, the Windows Boot Manager still offers Vista and Ubuntu as boot options. But Ubuntu, rather than boot, goes to a grub shell. I found a GrubHowto that includes "Manual boot into a Linux OS" - but it seems to suggest that clean Karmic installs use Grub2 and the Howto instructions apply only to Grub. I don't know if the WUBI install was Karmic or something older. I don't know anything about using grub manually.And I don't know how to get my (k)ubuntu back!
View 1 Replies View RelatedWhen I installed Kubuntu 11.04 using Wubi it did not load the Ubiquity installer like it normally does. Instead the boot screen (image attached so you know what I mean) remains displayed for the entire installation. The installation works fine once installed but I was wondering if this is normal or not?
View 2 Replies View RelatedI have installed ubuntu 11.04 using wubi with Windows Vista Home Premium 32 bit. The operating system works fine. Althoughwhen I boot and choose linux I get an error message during boot which stays forever. I have to shut down using power button and start again when it boots fine.
Another problem is when I restart from ubuntu it restarts back to the desktop but when I shut down, it does not shut down the computer. Stays on with blank screen forever. I am attaching the image of latest error I received on boot.
I just recently installed linux kubuntu 9.10 and for some reason it says sound card not installed. When I know its installed. When I boot it (I have dual boot) as windows it works just fine. My sound card is HDA ATI LSI Si3054
View 4 Replies View RelatedI install ubuntu 9.10 via wubi in XP. I upgrade it to 10.04LTS After reboot, I can't enter into neither ubuntu nor XP the screen prompt:
Quote:
erro:no such device:9c8f046f-d2c9-40c4-ab2b-a0c1266e62d2.
grub rescue>
There are three partition in my computer, i.e. , c:,d:,e: I intall ubuntu in d:
I have replaced wubildr with patch from [URL] but it doesn't work.
I have a ubuntu 10.10 wubi installation. It is installed to drive g:. While using ubuntu it is not showing me option to mount to this drive. It is showing all other drives.
View 2 Replies View RelatedInstalled Ubuntu 10.04 a week ago or so (using wubi.)Tried to upgrade to 10.10 from within Ubuntu using the update manager.Now the PC will only boot to grub rescue.When booting, this is what i get:error: no such device: cd200414-0606-4d7d-8c08-004e9b5dc92d.grub rescue>Three commands work: ls, set and insmod.The ls command only yields: (hd0)(no partitions like (hd0,1), (hd0,5), etc.)
View 4 Replies View RelatedI want to upgrade Ubuntu 10.10 installed through Wubi to 11.04. Now, Windows doesn't work. I can't upgrade Ubuntu by it because it is impossible to download files. Can I upgrade it without connecting Ubuntu to the Internet and starting Windows?
View 5 Replies View RelatedI tryed to installed ubuntu 11.04 but that dont work with grub bootloader.
So i tryed kubuntu 11.04 instad, that work.
Used :Sudo apt-get install ubuntu-desktop
But i dont get this menus:
I just get this wallpaper (Without menus?)
Is it some "Requirement" that i need? E.g display-drives/OpenGL or someting?
If not will this menu`s be disabled?
I just got some like: (Ubuntu classic)
As default desktop (Ubuntu)
KDE desktop work great also.
I want to install Ubuntu but not as Dual-Boot (Other OS is Windows XP x64 edition).
Does Wubi perform significantly better than an Ubuntu version installed on VMWare or VirtualBox?
My computer has:Intel Core2 Quad Q8200 @ 2.33GHz. 4GB RAM. An almost empty 450GB HD (defragmented)
I tried to upgrade through Ubuntu Jaunty .04 to Koala but couldn't, I think it had something to do with the Kubuntu I have dowloaded also, (like it goes to the same splash screen and I choose if I want to go to Ubuntu or Kubuntu) the kubuntu is on the 8. version. how do I fix this so I can upgrade to Koala?
View 1 Replies View RelatedA couple weeks ago I became fed up with using Backtrack5 as a primary OS, as fun as it is, and installed Kubuntu 64-bit for AMD on a laptop with an intel chip. I didn't see an intel iso on Kubuntu's site right away, and I suppose I was too excited to try it to care. I have been having some problems with plugins working correctly, but i'm not even sure this architectural mixup is to blame for that.
To cut to the chase, should I be worried about installing kubuntu that was intended for AMD on a board with an intel chip? I figure i havent really done anything I can't easily redo yet, and if I want to reinstall, i'd like to do it before I cross that bridge!
I wanted to install ubuntu via wubi, but i had to format my partitions (can't do it on wubi ) so i used a crappy program(i don't remember the name) to get rid of Backtrack4 , because i wanted windows kept for my mom.So, that was the sorry, i've ended up with a GRUB error 22, and a Backtrack4 CD stuck in my DVD-rom.So my question is: Can somewone tell me how to fix error 22? (i've seen some methods online, but i obviously can't put a Windows CD in my DVD rom because the Backtrack4 DVD is stuck in there.
View 4 Replies View RelatedWhen I try to install Kubuntu 10.04 from the live CD (ran the installer from the Live Desktop) I get this error:
I then get sent back to the partitioner after clicking continue. Nothing but the installer/live desktop is using the cdrom. How do I install it? I have also tried running the installer without the live desktop, and it still throws the same error at me.
I have a problem, because installation of ubuntu 11.04 will fail if I try to.
I have also Kubuntu and Xubuntu installed, which I regret a lot because I cannot uninstall them as well...
The problem is that I have installed a one-time-activation proprietary software so a fresh install is no option.
The error when upgrading is, that "xubuntu-desktop" cannot be marked for upgrade!
I wanna install both Ubuntu and Kubuntu with Wubi win installer. Is this possible and how to do it?
View 5 Replies View RelatedI understand this is a common problem but i can't seem to find a solution for it other than use gparted to partition your hard drive and install directly to the hard drive.
I am trying to load 10.10 through the wubi installer. I want to install the 64 bit version of ubuntu. My windows OS is 64 bit as well.
I download the wubi online and when i run it i get through the first step of picking how large i want the hard drive and my sudo password. I click next and it goes to download the 10.10 x64 ISO. After about 10 sec a firewall alert comes up and i say allow then right after that the wubi crashes and i get an error log that i will post below saying i dont have permissions. Ive also tried using the right click "run as administrator" option on the wubi from windows 7.
Ive also tried downloading the ubuntu 10.10 x64 desktop iso. i extracted it using winrar then ran the wubi that comes with that and i get the same issue. I find it funny that when your run the wubi from the install disk it still downloads another copy of the iso instead of asking for its location on your hard drive.
I like the concept of the wubi and i had previously installed 10.04 through the wubi and loved it. I had an issue with 10.04 after doing a lot of tweaking and I simply wanted to just remove it and install 10.10 fresh. I'm strictly using ubuntu for experimental and learning purposes so i dont want to install it directly to my hard drive.
WUBI ERROR LOG:
I have windows xp and I installed wubi from their website. It seems simple and easy and I was expecting a prompt when i rebooted but it directly goes into windows. How can I make the prompt show?
View 1 Replies View RelatedAt the Ubuntu.ork front page, it promises:
Quote:
This Windows installer (Wubi) will help you to run Ubuntu within your current system.
What exactly is meant my this? Does this mean it is an easier way to install the dual boot with Windows? (I am using Windows-7 on a new PC.) Or does it mean it will install Ubuntu under Windows? I assumed it meant the latter.
In any case, I downloaded it - a mere 1024K, scanned it and ran it. I get a stubborn error box with the message:
Quote:
There is no disk in the drive. Please insert a disk into drive
DeviceHarddisk3DR3
[Cancel] [Try Again] [Continue]
And that box will not go away - no matter what I press, including the [X] button in the upper corner, the box reappears. I had to go into Process Explorer to kill pyrun.exe and its parent, pyl5E39.tmp.exe before the [Cancel] button would close it for good.
I could not find doc on this so I don't know what it really wants as a prerequisite to running wubi.
I tried to install ubuntu 9.04 from wubi in windows 7 ultimate today. But it failed. I met a problem when installing: An error has occurred setting the element data. The request is not supported. The detailed information in installation log file is:
>>stdout=
01-26 13:29 DEBUG TaskList: # Cancelling tasklist
01-26 13:29 DEBUG TaskList: New task modify_bcd
01-26 13:29 ERROR root: Error executing command
>>command=C:WindowsSystem32cdedit.exe /set {d29666c7-0a4d-11df-a945-002268e2b352} device partition=I:
>>retval=1
>>stderr=An error has occurred setting the element data.
The request is not supported.
[Code].....
The request is not supported. I tried to use bcdedit /set <GUID> device partition=I: manually, but still have the same error.
I have installed ubuntu 10.04 with wubi under windows XP, but now I need more space. Ubuntu is on C:ubuntu and I have space on D: . How can I give ubuntu more space?
View 1 Replies View RelatedInstalled Ubuntu 10.10 Using Wubi - Can't Access GUI First, let me say that I'm new to Ubuntu and this is the first time I've tried installing it on my desktop PC. My PC specs are as follows:
Operating System:MS Windows XP Professional 32-bit SP3
CPU:Intel Celeron 336, 2.80 GHz, Prescott 90nm Technology
RAM:1.0GB Single-Channel DDR @ 165MHz (2.5-4-4-7)
Motherboard:MICRO-STAR INTL, CO.,LTD. MS-7108 (Socket 478)
Monitor:LG-T711S @ 1024x768
[Code]...
Can't install Wubi - log file
I can't install Wubi, I keep getting an error, here is where the log file starts saying "ERROR":
I have Kubuntu installed under windows 7. It finds my wireless connection and says i am connected. even with a wired connection it does the same. When i go to the web browser and try it out. says problem with connection. will include some pictures of "iwconfig" and others.
View 4 Replies View RelatedI have a Wubi 10.04 installation and I just did an upgrade and then I rebooted and then I got a message which just said 'error: file not found'. Then it doesn't do anything after that. I get no grub prompt or anything. I'm a newbie to Ubuntu so I'm not sure what to do.Is there a way I can repair the installation from windows maybe or what can I do because I can't even enter the command prompt.
View 2 Replies View RelatedI decided it was time to reinstall Windows 7 because it became increasingly slow. I know that there's a different solution to solve this problem, but as a user I'm just more satisfied with the noob friendliness of Windows. However, I know that it has its drawbacks so I had a dual boot setup with Wubi (30GB). My old configuration was as follows:
C: partition of size ~80GB with Windows 7 x64 installed
D: partition of size ~400GB with data and a wubi ubuntu at D:/ubuntu
So what I did was this:
- Backup all my personal files and D:/ubuntu on a external hdd
- Wipe the partitions using the windows installer
- Create a C: of 100GB and a D: of 380GB
- install windows 7 x64 on the C: partition
Now I would like to restore my backup of the old D:/ubuntu to a working dual boot system. I realize I may have missed some opportunities and the data may be gone, but I only found out about that when it was too late. I have tried installing wubi, and replacing the new ubuntu folder with the old one, but this did not work.
error: no such device: 9054698454696DC2
error: no such disk
I have also tried replacing only the root.disk file, with the same result. I searched for other people's solutions, but they did not seem to work in my case.
After clicking on wubi.exe nothing happens. Wubi does not start at all.Windows XP, SP3.
View 9 Replies View RelatedI'm trying to install Ubuntu on Windows XP as a dual boot using Wubi, but whenever I try to install it I get an error message that says: An error occurred: Permission denied For more information, please see the log file: c:docume-1lanzarolocals-1 empwubi-10.04.1-rev190.log Does anyone know what this means and if I can fix it?
View 7 Replies View Related