Ubuntu Installation :: WUBI + Kubuntu-desktop Wrecks Boot?
Mar 5, 2010
On my MS Vista 64bit machine, I installed Ubuntu through WUBI (some time in 2010) and was happily booting one or the other as needed. Then I added kubuntu-desktop (using Synaptic).Now, when I reboot, the Windows Boot Manager still offers Vista and Ubuntu as boot options. But Ubuntu, rather than boot, goes to a grub shell. I found a GrubHowto that includes "Manual boot into a Linux OS" - but it seems to suggest that clean Karmic installs use Grub2 and the Howto instructions apply only to Grub. I don't know if the WUBI install was Karmic or something older. I don't know anything about using grub manually.And I don't know how to get my (k)ubuntu back!
View 1 Replies
ADVERTISEMENT
Aug 16, 2011
When I installed Kubuntu 11.04 using Wubi it did not load the Ubiquity installer like it normally does. Instead the boot screen (image attached so you know what I mean) remains displayed for the entire installation. The installation works fine once installed but I was wondering if this is normal or not?
View 2 Replies
View Related
Mar 22, 2010
The last version a Linux I had was Mandrake v9.1. However, in looking to get the latest/greatest Linux I downloaded Ubuntu and Kubuntu. After installing Kubuntu the system reboots and fails to boot into the OS. After the P.O.S.T all I get a the word "GRUB". There is no response to any keys with the exception of Ctrl-Alt-Del. I am temporarily able to get passed the boot problem if I boot from the CD and choose boot from primary hard menu option. I'm not sure how to fix the boot up problem and could use some advice. However, using the CD to boot up the hard drives installation leads me to my next problem.
While in a desktop session I am unable to drag windows by their title bar. When attempting to drag a window, the desktop becomes covered with parts of the original window spreading all over the screen in multiple directions. It looks like a kaleidoscope or bad acid trip image. I suspect the video anomalies might be configuration related or improper driver. Again guidance would be greatly appreciated here.
I have a good 'ole Matrox MGA Millenium card installed into a P4 1.8ghz system, with 512 MB ram. The hard drive originally had an old install of Mandrake v9.1, but all of the partitions were wiped and I created 3 new partitions:
- /dev/sda1 20GB Bootable/Primary Partition EXT4 (Unbuntu mounted at /)
- /dev/sda2 18GB Primary EXT4 (Kubuntu mounted at /mnt/Ubuntu_dsktop_91)
- /dev/sda3 2GB Swap space
My intent was to install Ubuntu on the 2nd primary partition and be able to switch between them. However, I tried installed Ubuntu on the first partition (reformatted of course) and I encounter the same boot problem and display problem.
View 1 Replies
View Related
Apr 30, 2011
I have insatalled Kubuntu using wubi (in windows). But when I am running Kubuntu it is showing the following error.
try(hd0,0) : FAT16 : NO WUBLDIR
try(hd0,1) : NTFS35 : NO wubldir
try(hd0,3) : NTFS35 :
What should I do???
View 1 Replies
View Related
Aug 14, 2010
I was running kubuntu 7.10 from 2007 till two days back. Thought it quite old, so wanted to upgrade from 7.10 to 9.10, and if I like the latest kde 4 (since I've not used it yet), the plan was to use the lucid lynx. The two phase upgrade from 7.10 -> 8.04 -> 9.10 went seamlessly without any hitch.
But now the problem started to occur, and I will point them one by one:
1. While booting, the startup splash screen falls into a console which read "checking battery state ... DONE" and it stays there forever. So, I opened another terminal by ctrl-alt-F1, gave my login id, password, type startx to go into the graphical mode.
I checked the /etc/kde4/kdm/kdmrc file and made the Code:
I Also tried the other suggestions like restarting the kdm and dpkg-reconfigure. But the problem still exist.
Now I see, that the console is not stucking at check battery state message , rather its going to the tty1 and asking for the login/password.
Code:
Code:
Code:
Code:
My xorg.conf display section shows:
Code:
Now, I don't have Nvidia graphics card installed, so can I safely remove whatever lists in Synaptic searching with 'Nvidia*' ?
2. I want to stop the notification/system sound for application, e.g. while closing a button in griffith or closing a window in pidgin the system emits a sound, I want to stop all these sounds, how to do that?
3. In kde3, I can search file under the present directory using konqueror, now I see konqueror has a search bar, but that is for web, not in the local file system. I am missing this very helpful feature of konqueror, can I somehow brought it back?
4. This issue is not 9.10 specific but faced in 7.10 .. Whenever I try to play an audio cd the system just freezes. The only in error dmesg is
Code:
View 1 Replies
View Related
Feb 24, 2011
So yeah I want to transfer my system to the real Ubuntu. Problem is I can't boot into my Wubi Ubuntu cause I lost boot.
View 5 Replies
View Related
Oct 24, 2010
I wanna install both Ubuntu and Kubuntu with Wubi win installer. Is this possible and how to do it?
View 5 Replies
View Related
Apr 1, 2011
I put Ubuntu 11.04 Natty Desktop Beta 1 on a flash drive using 7-zip and am trying to install it on a (this is all I know about it) an HP G71 laptop, but when I hit Esc (as instructed) to interrupt the boot process, when I hit USB DEVICE, It starts up with Windows.Is there a way to do a basic install with wubi without booting up from the drive?!?!?!?!
View 8 Replies
View Related
Jan 29, 2010
want to ask how to install kde (not kubuntu-desktop) in ubuntu 9.10
View 6 Replies
View Related
Jan 2, 2010
I have settled on Ubuntu 9.10 as my preferred distro and was keen to try out which desktop I preferred so I installed kubuntu-desktop and all its dependencies via synoptic package manager following a guide on psychocats.net. Decided I preferred Gnome and wanted to get rid of all duplicated applications etc so followed same guide to remove. [URL]
[Code].....
View 2 Replies
View Related
Sep 1, 2010
I have recently discovered ubuntu and like it's elegance and simplicity and want to learn more about it "hands on". To this end I have tried to put it on one of my PC's running the Vista SP2 OS...When i try to install it with the CD the drive spins up then starts "hunting"..next the PC shuts down..black screen monitor.no KB or Mouse..the monitor flashes a box saying "power saving mode" then all is dead except for the power button being lit..I have to manually turn the PC off to recover...Next i did a D/L of wubi and rebooted as advised.Selected ubuntu on the BIOS and had the same final result as B4 with the CD. I have D/L and burned 2 CD's, one with my XP machine and the other with the Vista machine..Both CD's work as advertised on my XP machine (i did the "live" install) but not the Vista. The Vista machine is an HP with: AMD Athlon 64x2 3800+ CPU..3 GB of RAM..250 GB HDD. I do not like Vista ( i inherited the machine) it's a pain in the posterior. IMHO ubuntu and it's ilk are the way to go and i intend to do just that one way or the other.
View 5 Replies
View Related
Jan 7, 2010
I installed Xubuntu 9.10 with Wubi and it worked fine until a recent kernel update broke my install. I uninstalled through Windows and reinstalled Xubuntu 9.10 with Wubi with no apparent problems.When I look in C:ubuntudisks, root.disk, swap.disk, and the boot folder are both present. The C:ubuntudisksootgrub folder is empty; I don't know whether or not it should be that way.But when my computer starts, it just boots Windows Vista without displaying the menu asking me to select my OS.
View 3 Replies
View Related
Dec 28, 2010
I have a Toshiba laptop with windows 7. I installed wubi and all worked fine until I ran some ubuntu updates. Now the computer will not boot, what comes up is error: no such device: f53e513e-bfa0-4126-ab5c-8f7777505812. grub rescue> Is returns unknown command set returns prefix=(hd0)/boot/grub root=hd0
View 2 Replies
View Related
Dec 16, 2010
I just installed Ubuntu Server, I'd like to try out other desktops interfaces.When I originally tried out (wubi test drive) Ubuntu Desktop 10.10 the default desktop interface was very nice and clean...plus it seemed to render screen fonts very well I currently have Kubuntu Plasma interface installed.Can I use that Ubuntu Desktop on Ubuntu Server?If so, how would I go about installing it?
View 1 Replies
View Related
Apr 13, 2010
I am dual booting win7 and Ubuntu 9.10 with wubi.
-If I don't select ubuntu, it will boot into win7.
I want to change it so I can go into ubuntu after 30SEC so I don't have to always select it.
View 3 Replies
View Related
May 27, 2010
I am using WUBI to run ubuntu.I upgraded to 10.04 from ubuntu 9 using the update option provided.On restart after the update,i get to grub rescue prompt.Here when i type ls i get the output as hd0 and hd31.I cannot login into windows because the option to select between windows 7 and ubuntu is not available anymore.
View 4 Replies
View Related
Jun 29, 2010
I'm running Windows and 9.04 in a dedicated partition on my HP DV1000 (32bit), and I would like to boot to a 10.04 Live CD to make sure that everything will work with the upgrade. But, no matter what I try (unetbootin USB, Linux Mint, CDs of both) I can't get the machine to boot to anything other than the HD.
I did a wubi installation of 10.04 on a Compaq CQ laptop and ran into the same problem. I went into the BIOS on both machines and I think I tried all the different settings, but no go. I must be missing something. Is working through the BIOS the only way to get one's machine to boot from a usb or optical drive, or is there another trick to it?
View 5 Replies
View Related
Oct 16, 2010
I just updated my ubuntu 10.10 installation inside windows (wubi) and after that I shut down my computer. Later on I switched it on again and was unable to boot ubuntu. Ususally I first get the 'Windows boot menu' and after i select ubuntu i get the grub menu. Now, when I select ubuntu in the windows boot menu I dont get grub after that but instead the computer restarts. Is there any way to fix this issue without reinstalling ubuntu.
View 2 Replies
View Related
Nov 26, 2010
I want a well maintained guide which shows how to dual boot windows xp and ubuntu 10.10 without wubi and not corrupt my Windows Installation.
View 4 Replies
View Related
Dec 27, 2010
I've been unable to do a non-Wubi install of U 10.10 desktop 32 bit. My setup:
HP p6240f , Intel Core2 Quad Q8300 2.5 GHz, 4 MB L2 Cache, 1333 MHz FSB
Currently, I have a clean install of Windows XP (updated) on my desktop. Previously, I used a clean install of Windows 7, but ran into the same problems below. My U install problems are:
1.) Live CD will not boot upon restarting PC. As per the U documentation web site (URL) , md5sums confirmed that proper .iso copy was downloaded and burned to CD. (However, see log file below for md5 error)
2.) "Installing CD boot helper" does not work. I receive the following error message: "Could not retrieve the required installation files", and it refers to a log file. An excerpt of the log file is below.
12-27 18:06 DEBUG TaskList: #### Finished get_metalink
12-27 18:06 DEBUG TaskList: New task get_file_md5
12-27 18:06 DEBUG TaskList: #### Running get_file_md5...
12-27 18:07 DEBUG TaskList: #### Finished get_file_md5
[Code].....
View 5 Replies
View Related
Jan 26, 2011
I gave up on XP - not the place for long sob stories - and decided to try Ubuntu. I know nothing, so I chose the 10.04.1 because it said stable... made a CD, took it to the problem computer, tried several times to load, then noticed that "Wubi" loaded from windows. I hunted down a 10.04.1 Wubi, and it seemed to read rather well. No error messages, told me to remove the disc. I did, told me to reboot. I chose ubuntu and it froze with the words :
Completing the Ubuntu installation:
For more installation boot options, pres 'Esc' now...
0
_
I waited, nothing. I put the CD in, nothing. Now what?
View 9 Replies
View Related
Nov 6, 2010
I have Kubuntu installed under windows 7. It finds my wireless connection and says i am connected. even with a wired connection it does the same. When i go to the web browser and try it out. says problem with connection. will include some pictures of "iwconfig" and others.
View 4 Replies
View Related
Mar 31, 2010
XP Pro SP3
Ubuntu 9.10
Kubuntu 9.10
Tri-booting. They were installed in the order I listed above. I ran into a few bugs with Kubuntu, so I no longer want to use it. I want to use GParted on a LiveCD to format Kubuntu and expand my Ubuntu home partition to sit on top of Kubuntu's space right now. If I nuke Kubuntu, will Grub still exist with my Ubuntu/XP entries to boot?
View 4 Replies
View Related
Jul 22, 2011
today i've installed kubuntu with wubi for windows 7 on my hp pavilion dv6 with processor Intel Core i7 Q720 @1.60GHz with 4 Gb of RAM @ 64bit with NVIDIA Geforce GT 230M but i've had some problems.Infact the system continued to freeze after some minutes due to overheating so i restarted the computer and the Bios told me that to prevent damage to internal components the computer has been freezed. I repeated the process and i checked out the temperature with the desktop widget and it actually reached after some minutes 80-85� C so i cleaned the computer and the temperature turned back to normal (50-60�C) but the problem continued to exist! After several minutes the computer freezed again and the BIOS told me the same things he told me before (90� and computer freezed due to prevent damage for overheating).
View 1 Replies
View Related
Apr 14, 2010
I recently did a Wubi install of 9.10 on my netbook that initially ran Windows 7 Starter. I wanted to speed up the booting process so I went into Windows and set the OS selection list waiting time to be 0 and the default OS to be ubuntu. I did this assuming that there is a way to force OS selection list to be brought up during boot; I think I was wrong.So now, I'm stuck booting directly into 9.10 (not even a full install!). Is there a way to either modify the Windows boot file to reset the selection list timer or to force the list to be brought back out?
EDIT: I should note that editing the grub files within the wubi install would only make changes to the GRUB loader, which has no effect on the actual Windows loader.
View 3 Replies
View Related
Nov 27, 2010
I've been running Ubuntu 10.04 AMD64 on our home theater PC through a wubi installation. Yesterday the system update installed a new kernel and today there is a problem booting the computer so I'm reluctantly using Windoze to type this. there isn't much information: the computer has always booted fine before the kernel update. When I select Ubuntu in the boot menu the screen goes black and the computer restarts. No error messages, no GRUB menu, just a blank screen before restart.
Computer: Dell Hybrid 140G, Intel Core 2 Duo T5800, 4GB RAM
View 4 Replies
View Related
May 4, 2011
I'm new to Linux, and i was playing around with wubi for some time, and now i made a fresh instal of 11.04 64bits, no problems so far! But one thing was change, the boot system. My computer is used by me and my daughter (7years old), and when i was using the wubi instalation when booting she only see Wyndows 7 and Ubunbtu, . Now with this fresh instalation, i think is grub o takes control, she have a hard time to try to enter in W7, because of all "offers" from their.
So my question is, can i change the boot system to w7 control (like with wubi)?
View 2 Replies
View Related
Nov 12, 2010
After clicking on wubi.exe nothing happens. Wubi does not start at all.Windows XP, SP3.
View 9 Replies
View Related
Jan 11, 2010
i have Karmic installed with Wubi inside a Vista NTFS filesystem. Yesterday i did an apt-get dist-upgrade and Karmic never booted again. It won't even show the grub kernel list, it just shows some really quick text that vanishes before i can even figure out what it is and then drops to some sort of grub shell and then i can't figure out what to do.
I could boot a livecd and mount my karmic install and everything seems fine, the filesystem is clean and all that. But how do i fix it so it can boot again?
Does anyone here know wtf happened? Was there a bad upgrade or something?
View 3 Replies
View Related
Jul 3, 2010
I have a Wubi 10.04 installation and I just did an upgrade and then I rebooted and then I got a message which just said 'error: file not found'. Then it doesn't do anything after that. I get no grub prompt or anything. I'm a newbie to Ubuntu so I'm not sure what to do.Is there a way I can repair the installation from windows maybe or what can I do because I can't even enter the command prompt.
View 2 Replies
View Related
