Ubuntu Installation :: Fix Non Booting Windows7 Partition After I Installed 10.04?
Apr 17, 2010
I installed 10.04 and Grub won't boot into Windows7. I attempted to fix the problem through several different methods and nothing worked and I fear I made the booting problem worse than it was to begin with. I can boot into Ubuntu just fine, just not Windows7. Black screen with a cursor upper left hand. Windows7 repair disk does not help and using Windows7 command line repairs did nothing.
So here is an idea I came up with: Is there any way I can back up the Windows partition exactly the way it is, reinstall Windows7, and then somehow lay down all that information directly over the install to make it exactly like it was?
I doubt it is that simple, but is that possible? Like basically unhiding all the hidden files, copying them into a folder on my Ubuntu installation, reinstalling Windows7 and just copying them all back?
My system set-up is one HDD that is partitioned having two Windows7 bootable partitions, and Ubuntu. I originally had Windows7 and Ubuntu, but I wanted to have another Windows7 OS to keep clean for gaming. Of course, when installing Windows7 it wiped out Grub2. I've reinstalled Grub2, but now I'm having a problem in that when I choose Windows7 in the Grub menu, it directs me to the windows boot manager to choose one of my Windows7 partitions to boot. I'd like to configure Grub so I can choose which Windows7 installation I'd like to boot from there. I've tried added custom scripts to point grub directly at the partition where each installation is located, but it always directs me to the windows boot manager. How can I bypass that?
iam new to linux i installed fedora 10 on windows7 ultimate 64bit after intallation the fedora system doesent boot, but windows7 work properly. i instlled fedora 10 in seperate fee partiotion
Sorry my previous question wasn't that informative so adding more. I had windows partition and free partition for Linux installation. I got installed windows7 and it installed fine, When I tried installing Ubuntu, I remember selected default options. I gave me default option as it clearly said "1. If you have another operating system (e.g. Windows XP) and you want a dual boot system, select the first option: "Install them side by side, choosing between them at each startup." I thought it would keep Windows as it is and I hit proceeded for installation.
first option: "Install them side by side, choosing between them at each startup." refer [URL] step #4. At the end I am disappointed that I cannot see Windows boot option (Dual boot) It just gives Ubuntu option. I kept 50 GB free space for Ubuntu. Is there any option to recover/switch to windows booting? Or I have lost Windows installation overwritten by Ubuntu?
I have a Asus EEE PC 1005HA netbook, which I use with Windows 7. I've been abroad for the last 2 weeks, and when I came back I found out my younger brother has installed Ubuntu on it.
When I asked him he told me it's no problem, and he didn't overwrite Windows, just installed on another partition.
However, I'm trying to get back to my original operating system and I have no idea how. Obviously, he has none either as he is just an impulsive 15 year old.
I'd like to either uninstall ubuntu and return to my windows OS, or just choose at boot time which OS I want to access (I don't really mind having a linux onboard, I assume it has it's merits).
In other words, I somehow deleted the first partition of Windows7, the windows reserved system partition. WHat is the quickest way I can rescue this system? Client has been waiting for her machine a long time already, I have to delived today, no time to re-install windows7.
i have a M1730 with 2 HD in RAID 0. Windows 7 64bit installed. I tried to install Ubuntu 10.10 with WUBI, all ok the installation in Windows. Restarted the system I have 2 multiboot options with the new Ubuntu... it starts but in graphic mode it tries to finish the installation and stops with an error message like that: "root filesystem not defined...".The problem is the raid0 of my disks or other?
Is it possible to install ubuntu 10.04 on a second partition without overwriting the windows7 bootloader and boot it using grub on a usb stick?
I would be happy with just the second option as I could fix mbr if I have to, I just don't want it to easily visible that linux is installed as well as windows.
I just installed it. On the dual boot screen my windows7 partitions show up but nowhere on openSUSEI haven't checked if my windows7 partition boots though,
installed Ubuntu 9.10 in an internal SATA drive and used it for quite a while, but yesterday my laptop's graphics card decided to die, and it looks like it will be a full month until I get replacement m/b. Therefore, I bought an external USB SATA Hub for my laptop's drive, but I can't seem to be able to boot ubuntu from this drive. I'm trying to boot with this external usb hub attached to an old P4 machine with USB booting enabled.I get till the grub screen, but as soon as the message "Grub loading" appears, I get a message saying:error: no such partitionand I get a prompt as follows:grub-rescue>I guess grub is trying to boot to a different device name... It's weird, I thought Ubuntu should boot irregardless of which interface I use, be it SATA or USB.
I have a single boot ubuntu installation (that I like very much) that I want to migrate to a larger hard drive that has an XP installation on it so that I can dual boot on one hard drive. I've already partitioned it.
So:
Hard drive A: has Ubuntu on it
Hard drive B: has two partitions, one XP the other one waiting for Ubuntu.
I'd rather not just install Ubuntu all over again as it was annoying to install the wireless dongle. among all the other secondary installations and tweaks that have been done.
I've installed Fedora 12 64bit, but the computer crashes while booting, basically after the irqbalance or rpcbind steps.
Here are photos of the error messages:
Here are my hardware specs: MB: Biostar TF560 A2+ CPU: AMD Athlon 64 X2 Dual Core 5000+ RAM: DDR2 800 Dual 128 bit, 2T (4GB) GPU: ATI Radeon HD 3870
The sound and network cards are integrated but I've tried disabling them from BIOS and the problem persists.
Note that I've tried Ubuntu (32bit and 64bit) and it also crashes about 30 seconds after loading the graphical interface (either installer or login screen). Fedora's graphical installer worked flawlessly, tho. I've also tried SLAX (using it right now) and it works without any problems.
I have tried ubuntu 9.10 for 2 months, and I really liked it. So I decided to get rid of my Windows XP and expand my 10 GB linux partition to 146 GB. So I used GParted. I backed up the windows on some hard drive, and copied the 10 GB partition to the 146 GB partition (so I had the same data twice on my laptop). Here is a screenshot of my partitions
When I restarted, I booted normally to find myself in the 146 GB partition (which is great). The next time I booted normally to find my self back in the 10 GB partition. Every time I try to boot now I end up in the 10 GB partition. I'm a noob, but I guess it has to do with the configuration of GRUB to boot to one partition not another?
I can't boot to Windows XP after recently installing Ubuntu (Ubuntu boots fine). The error that comes up (straight after selecting XP) is that it can't find "system32hall.dll".
Reason for the problem: Ubuntu is looking at the old, corrupted version of XP that I have. The 'real' version is on another partition, for reasons too lengthy to explain. Note: neither of these partitions were touched when installing Ubuntu - I placed Ubuntu in the pre-existing partitions I had setup when installing previous versions of Linux (last was Mandrake 8.)
Now, I can understand why it is looking at the old version, because it is on the first partition of the hard drive, "dev/sda1", the new version is on "dev/sda3" (nomenclature according to Ubuntu, obviously).
Question: How do I point the config file to sda3? I have tried setting root to "hd0,3" and "hd3,1" with no luck. Original code is below:
Code: ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Professional (on /dev/sda1)" { insmod ntfs set root=(hd0,1)
I just pArtitioned my acer one netbook and installed fedora 12 to half my disk. Fedora is working just fine but when I try to boot I into 2 options. " completely restore system to factory defaults" and "restore operating system and retain user data". Should I do Any of these or should I reinstall windows?
I just formatted the partition that contains fedora 15 using windows.. Now when I attempt to boot my PC the grub bootloader comes up and I cannot boot anything.... The error that I get|| i feel i need a boot command to boot boot win7 from grub... grub propmts me " minimal bash-like line editing is supported. for the first word tab possible list a possible commands completion anywhere else tab list
I have upgraded my F8 installation to F10 installation recently. After this upgrade, I am able to access the windows partition, and add remove files in the same.Today, I tried booting into my windows partition and I was unable to boot into it. My laptop tried to boot into it, but crashed and came back to the grub selection screen...I did not have this issue previously, with other Linux installations..
I have a Dell VOSTRO laptop that I use for windows Vista. I have an old disk drive that I put into a USB case and now I want to use that for a Debian system. I do not want to install grub on my laptops HDD, if I do I need to have the USB HDD plugged in everytime I boot and i find that a real pain. I installed Debian on the USB drive with no problem and when it asked where I wanted to install GRUB I picked the USB drive ( I think ). Now when I interupt the boot and tell it to boot from the USB drive grub comes up with the correct menu but when I pick Debian I get the following messages:
Booting 'Debian GNU/Linux Kernel 2.6.26-2-amd64' root (hd1,0) Filesystem type unknown partition type 0xde kernel /boot/vmlinuz-2.6.26-2-amd64 root=/dev/sdb1 ro quiet Error 17: Cannot mount selected partition
i installed ubuntu 10.04 with wubi on Windows 7. It works perfectly. And, i've only installed 5GB rather that 20GB in my partition (from the wubi option at the first time). I made this partition only for ubuntu but silly me i've installed only 5GB rather than to chose 20GB Now the ubuntu is low on disk space! it' only 120MB left from 5GB. My question is, is there any way expand it to 20GB so the partition is fully for home folder, etc? I want my 15GB!
I just installed ubuntu on a partition on my laptop that already had a windows7 partition. First I had Kubuntu installed, but I decided to just try Ubuntu instead. I did things the right way when I installed Kubuntu and I could switch between OSes on reboot. Then when I installed Ubuntu I accidentally put grub on /dev/sda1 instead of /dev/sda. I didn't even notice for a while because I never felt like I needed to go back to Windows until I felt like playing starcraft 2. That's when I noticed that when the boot options screen appears and I select Windows, the screen goes black, a cursor flashes in the upper left corner for about a second, then the boot options screen reappears.
If I boot using my windows 7 cd and go into recovery, get a command prompt and type Bootrec.exe /FixMbr and Bootrec.exe /FixBoot, the options appear to complete successfully, but then when I reboot, I get a permanent flashing cursor.
If I follow that by inserting my parted magic cd and running testdisk and overwriting the mbr, I get back to the first situation where the boot options screen will appear, but the windows boot loader just returns me to the boot options screen. I can get into ubuntu, at least. Whenever I run testdisk I can't replace the boot with the backup boot because I'm pretty sure it's identical to the flawed one.
I have booted from the .iso cd I made on my Mac last night and was tempted to install it on a 6gb partition that I have on my main HDD but was a bit scared to go past the fourth (or so) step in manual installing where I pick that partition and *do what?* Is it going to install the OS on that partition and leave everything else alone to give me a dual booting PowerMac? It doesn't quite say. I am fearful of screwing up my little ol' machine. Can anyone direct me to something that gives a step by step in manual installation on an already created (HFC+) partition to create a dual booting PowerMac?
I have a Lenovo thinkpad T400 with Vista x64 that I want to dual-boot with fedora 10. The T400's original config has 3 primary partions:
1) Vista boot partition (some weird partition that it only uses to boot... this is my first time using Vista so I don't know the details, but I think it has to be there and it has to be a separate partition from the "data" partition)
2) Vista data partition
3) Lenovo Rescue and Recovery partition (a separate bootable partition that is used for recovery, backups, ...)
My first attempt was to shrink the recovery partition and add a new extended partition that has the two standard fedora logical volumes and an extra NTFS to be shared between the OS's (I usually use FAT32 for this one, but NTFS support seems to be pretty solid now).
Everything was fine, but I couldn't boot into the rescue partition. According to this site:
[URL]
You *have* to have a linux boot partition be your primary partition. Other people have told me the same thing and that site has an explanation, but I don't get it =)
So, it seems that I need 5 primaries (3 original vista/lenovo primaries, 1 linux primaray to put the boot stuff into, and 1 extended for everything else) to make this work (which is not possible). Can anyone think of something else I could do (other than getting rid of Vista and the Lenovo stuff and giving them both the finger?) I'm thinking maybe I could make an extended partition and move one or more of the Vista/Lenovo partitions in there, but I'm not sure if they could boot.
I'm trying to achieve my dream (but indeed not perfect) boot scenario: dual-boot OpenSUSE and Fedora with shared /boot, /home and SWAP partitions. First I installed OpenSUSE (sda3 on my layout below) with separate /boot (sda2), /home (sda5, encrypted) and SWAP (sda6), next I installed Fedora on /dev/sda1, and pointed it to mount sda2, sda5, sda6 with respective mount points, without formatting. I proceeded with the installation without installing new GRUB bootloader (overwriting an existing one).
It was successfull and now I'm back in OpenSuSE trying to edit menu.lst file (under /boot/grub) to make GRUB boot Fedora.
I attached a copy of menu.lst I cooked up for now. OK, it's a mess. Life would be allot easier if I didn't have a separate /boot partition, as I could just chainload, but it's no longer possible (or is it?). May be I needed to specify the resume device or problem is in initrd? below are the contents of /boot:
