Debian Installation :: Booting From USB HDD - Error 17: Cannot Mount Selected Partition
May 10, 2010
I have a Dell VOSTRO laptop that I use for windows Vista. I have an old disk drive that I put into a USB case and now I want to use that for a Debian system. I do not want to install grub on my laptops HDD, if I do I need to have the USB HDD plugged in everytime I boot and i find that a real pain. I installed Debian on the USB drive with no problem and when it asked where I wanted to install GRUB I picked the USB drive ( I think ). Now when I interupt the boot and tell it to boot from the USB drive grub comes up with the correct menu but when I pick Debian I get the following messages:
Booting 'Debian GNU/Linux Kernel 2.6.26-2-amd64' root (hd1,0) Filesystem type unknown partition type 0xde kernel /boot/vmlinuz-2.6.26-2-amd64 root=/dev/sdb1 ro quiet Error 17: Cannot mount selected partition
View 7 Replies
ADVERTISEMENT
Oct 10, 2009
I am having problems with grub. Originally I was having trouble installing Service Pack 2 for vista and I made the fool's mistake of changing the active partition in disk management from the boot partition to the windows partition. This blew up grub. After restarting I was dumped at the grub terminal i.e.
grub>
so I thought okay, I will just reinstall grub. I ran setup (hdx,y) but now when I restart first of all the splash screen is different, rather then the blue background with the big words in white, fedora 11, it's black and I get a error saying unable to read any images. I can see the different OS' I have on the grub screen but attempting to load any of them gives me
error 17 cannot mount selected partition.
I am currently running the Fedora 11 xfce spin live cd. From the terminal here, here is some information. sda3 is my fedora 11 partition I am not sure maybe it is because of ext4 but I can't seem to mount it using mount /dev/sda3 /mnt/xxxxx.
[root@localhost grub]# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x72edceee
Device Boot Start End Blocks Id System
[Code].....
View 11 Replies
View Related
Jul 22, 2010
I 've reinstalled XP partition on my ubuntu system 8.10 ,After that i reinstalled grub using live CD ubuntu 9.04
With the following commands:
but when i restarted the system i got the grub menu .. but when i select ubuntu i got the following error message: " error 17 .. can not mount selected partition "
View 1 Replies
View Related
Jun 4, 2010
I dualboot Ubuntu and Fedora in one hard drive. Below are the scenario.
First, installed Ubuntu 10.4 on the entire disk (40GiB of size). Then, shrink the Ubuntu installation to equal size to free up space for fedora.
Second, installed Fedora 13 using the option "Use free space on selected drives and create default layout". After the successful installation fdisk -l shows,
Code:
# fdisk -l
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
View 2 Replies
View Related
Apr 19, 2011
I've tried everything to solve this, been browsing the forums for the last 2 days and no solution has worked. So I got a new netbook (Samsung n150 dated 03/2011) it had ubuntu 10.10 installed but I already use ubuntu on my macbook so I'm trying out knoppix, I booted it from usb and ran the HD installer, it gets through all that and then installs grub ok, but when I reboot I get "Error 17: Cannot mount selected partition"
Things I already tried: Grub setup (grub, root (hd0,1), setup (hd0), quit) and every variation. *I tried removing the usb and setting the HDD back to first boot in the bios and then changing the menu.lst accordingly, still I get error 17. Below is the information just after boot with the usb still plugged in and set as first boot in bios.
[Code]...
View 3 Replies
View Related
Mar 29, 2009
I have a vista machine I recently put FC10 on. Through the course of figuring out wireless drivers, I goofed it enough that I was told to simply reinstall linux. I had the fedora GRUB file set as I wanted. But after I re-installed FC10 it would just hang after it searched for bootable CDs and stuff. I got the super grub CD and am able to boot into windows no issue. HOWEVER, when I select the fedora option, I get
"Error 17: Cannot mount selected partition"
I assume this means the grub doesn't know where my Linux boot stuff is. I have a separate drive dedicated to the linux install. The Vista drive is where the MBR is. So... how do I tell the grub where the FC10 install is? I've tried to reinstall FC10 twice hoping I just goofed something. edit: The standard grub file was in /boot/grub or something. Is there a file I can edit to point in the right direction?
View 1 Replies
View Related
May 28, 2010
When upgrading F12 to F13 I had a fatal error when I selected to update grub so I opted to do a fresh install of grub and the upgrade proceeded without any further problems. When I went to boot the system (dual-boot with Win 7) grub gave me error 17 "cannot mount selected partition". So I booted into rescue from the install disk thinking that maybe reinstalling grub might help, but when I ran "grub-install /dev/sda" I got the message that "/dev/sda does not have any corresponding BIOS drive" (I have Windows on SATA 1 sda and Fedora on SATA 2 sdb). I exited rescue mode rebooted entered BIOS and swapped the drive order and restarted. Success!... Well almost. The progress bar goes all the way across the screen to the point the login screen should come up then it hangs...
View 8 Replies
View Related
Jul 9, 2010
I installed Mac OS X 10.6, Windows 7 Ultimate, and made 4 partitions.OSX and 7 installed fine, but when I tried to install SUSE, it stopped at 92%.I get this error:
Code:
grub>setup --stage2=/boot/grub/stage2 --force-lba (hd0,3) (hd0,3)
Error 17: Cannot mount selected partition
grub> quit
View 2 Replies
View Related
Apr 19, 2011
I've tried everything to solve this, been browsing the forums for the last 2 days and no solution has worked.So I got a new netbook (Samsung n150 dated 03/2011) it had ubuntu 10.10 installed but I already use ubuntu on my macbookso I'm trying out knoppix, I booted it from usb and ran the HD installer, it gets through all that and then installs grub ok, but when I reboot I get "Error 17: Cannot mount selected partition"Things I already tried:*Grub setup (grub, root (hd0,1), setup (hd0), quit) and every variation.*I tried removing the usb and setting the HDD back to first boot in the bios andthen changing the menu.lst accordingly, still I get error 17.Below is the information just after boot with the usb still plugged in and set as first boot in bios.fdisk -l
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
[code]....
View 9 Replies
View Related
Dec 15, 2010
i ran into this issue only because i wanted to learn. I was reading the book, linux troubleshooting and decided to give it a try.
1) I went to /boot/ and moved vmlinuz (kernel file) to my home directory. (/root/)
2) I booted, it didnt boot (as expected) and now the troubleshooting part begins.
3) i entered to grub config mode using c
4) When i press root (hd0, (tab) it gave me 2 partitions. hd0 which is my boot partition hd1 which is my '/' partition. Please keep in mind its LVM and not a physical partition
5) If i do this, root (hd0,1), and press boot, it gives the following error Error 17: Cannot mount selected partition
During my research i found that, LVM is not supported by grub, so kindly confirm me this ? is this the reason i am not able to access my root partition ? i am doing this on vmware so no issues, but just for the sake of learning, can someone tell me some way of restoring it without using any rescure disk (livecd, liveusb etc) ?
View 26 Replies
View Related
Jul 9, 2010
I am a regular user of ubuntu . I reinstalled my window XP ( windows / ubuntu dual booting )
after that i give the commands
grub > root (hd0, 6)
>setup (hd0)
after that when i restart the system i got the following message
" error 17 can not mount selected partition "
when i selected ubuntu
View 3 Replies
View Related
Jun 3, 2011
I installed 15. I have reformatted the 500mb /boot partition, didn't touch the swap partition, formatted the / partition. Trying to boot, I receive a "cannot mount selected partition". This is a fresh install. I rebooted into the Live CD to do some FS Checks, and got kernal crash, black screen, lots of kernal output while in live CD trying to do FS checks. The only line that looks like it holds any info that may be relevant is the last of the lines that says: Kernal Panic - Not Syncing: Fatal exception interupt PID 1161, comm:irq/21-0000:01: tainted: g d (kernal version) Panic+0x91/0x19c
I did an FS check on /boot and it came back fine. I did an FS check on /, and it came back fine. But then I told it to do an FS check on swap and got the warning that swap is currently mounted, and that if I proceed, it could cause serious system damage, and asked me if I wanted to proceed. I chose no, and it crashed.
---------- Post added at 02:59 AM ---------- Previous post was at 02:42 AM ----------
wait, i think i found the problem. It APPARENTLY installed /boot as ext4. Reinstalling now. Will update momentarily...
---------- Post added at 03:06 AM ---------- Previous post was at 02:59 AM ----------
Nope, i explicity made sure i installed ext3 on boot this time, and it still gives the same boot error, AND i KEEP getting that kernel crash.
View 1 Replies
View Related
Dec 21, 2015
Have a new debian install on a asus h170m-plus (was going to use ubuntu but didnt support the hardware/software combo i needed)
Install is fine. but during install it didnt see my 1tb raid1 drive..
after reboot, debain boots great, and i can mount the raid drive in the file manager.
I can see it and in mtab it shows up :
"/dev/md126 /media/user/50666249-947c-4e8f-8f56-556b713a6b6a ext4 rw,nosuid,nodev,relatime,data=ordered 0 0"
How can I permanently add this mount point so it is found at boot up at /data...
View 5 Replies
View Related
Jun 24, 2010
what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
View 1 Replies
View Related
May 7, 2010
I recently did a single boot install of Lenny-xfce on a Compaq Armada laptop. There were no errors and grub indeed found that Lenny was the only OS on the hard drive and installed itself on the MBR. My problem is that I'm getting an error 18 when booting the freshly installed system from hard disk. I booted into rescue mode and started a shell to take a look around. There are files on the drive and /etc/grub exists. device.map shows dev(0,0) as being mapped to /dev/hda. A search on the forum for "grub error 18" came up with nothing.
View 2 Replies
View Related
Oct 15, 2010
Unable to install Ubuntu 9.10 on a new internal harddrive. The hardrive contains no operating system. This hardrive is the only drive present in the system.
Whenever the installation trys to mount the ext4 partition the following error appears: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition #1 (sda) at /failed
Iv'e tried over and over to get past this error to no avail.
View 6 Replies
View Related
May 25, 2011
I did a fresh install of F15, and I can not get it to boot
Quote:
Booting Fedora (2.6.38.6-27.fc15.x86_64)
root (hda,4)
Error 21: Selected disk does not exist
Press any key ton continue ...
The contents of my fstab
Quote:
UUID=9fc649bd-ea40-44ab-88f6-29afe4f26576 / ext3 defaults 1 1
UUID=2437a8af-311a-4caf-99b3-1f137df69d43 /home ext3 defaults 1 2
UUID=a6f67606-ecb6-47c4-8913-f101fc6a097e swap swap defaults 0 0
[code]....
From what I can figure out, grub can not figure out which disk has my root file system. I checked the partition labels and they match the UUID that are in my fstab.
View 5 Replies
View Related
Mar 7, 2011
Plan to use GRUB for multiple booting to select the OS but only with luck have I got it partially to work. Windows 98 and Puppy 431 O.K on first HDD but Puppy 421 on second HDD /dev/sdb1 stops at error 21.
View 6 Replies
View Related
Oct 12, 2014
ERROR: No configuration file found
No Default or UI configuration directive found!
boot:_
This appears when I try to boot Debian 7.6.0 from my USB drive
View 1 Replies
View Related
Mar 29, 2009
I just downloaded the Fedora 10 cd yesterday and decided to install it. I had a partition for Fedora on my system before but I'm not really sure what I did to it. It wasn't booting and it has been so long since I messed with it I just decided to reinstall with the latest (I think I was running F9 previously). So I pop in the live CD, run the install, and then reboot into Ubuntu. I modified my menu.lst to include the new vmlinuz and initrd versions, as well as the new UUID of the partition. Now when I reboot and choose Fedora from grub's menu I get this error:
Quote:
Error 18: Selected cylinder exceeds maximum supported by BIOS
I found this wiki which does a pretty good job describing the problem:
[URL]
However, I'm still unable to get this to work. According to many different sites out there this problem shouldn't exist on newer computers. Well, I just recently put a new motherboard into this box -- it's this one:
[URL]
According to their BIOS page the first release of this was late November 2008. Yes they have had 2 updates since then but it looks like those only serve to support AM3 CPUs (which I don't have) or update some audio playback issues. I seriously doubt I need to update my BIOS to get this to work.
Here's my fdisk:
Code:
$ sudo fdisk -l
Disk /dev/sda: 400.0 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I can get Slackware 12.1 to boot (though it kernel panics during startup...not sure what I did to make it angry), but grub immediately fails when I attempt to boot Fedora. Here's the entry from menu.lst:
Quote:
titleFedora 10 (on /dev/sdb1)
root(hd1,0)
kernel/boot/vmlinuz-2.6.27.5-117.fc10.i686 ro root=UUID=178bc9f9-76ba-48aa-a588-de978cc1eee1 rhgb quiet
[code]...
I have verified that the vmlinuz and initrd are both correct. I put the UUID in there after running vol_id so I'm sure the entry is solid. I have tried making it "root=/dev/sdb1" which failed with the same error, and I even tried copying the fc10 vmlinuz and initrd files over to my Ubuntu partition (which controls grub) but for some odd reason the cp command takes a really long time and then I eventually get this weird error for initrd:
Quote:
$ sudo cp /media/sdb1/boot/initrd-2.6.27.5-117.fc10.i686.img .
cp: reading `/media/sdb1/boot/initrd-2.6.27.5-117.fc10.i686.img': Input/output error
I got the same error with the dd command too. So I was going to just try and copy the files to my sdb3 partition and then modify the menu.lst entry appropriately but that doesn't seem to be plausible at this point.
I have a motherboard that was just released about 4 months ago, an Athlon X2 6000+ CPU, and 4gigs of RAM. The drives are both SATA 300 drives...it's not like this is some old Pentium Pro and the BIOS just doesn't support large drives...this is a brand new system with a very recent BIOS version.
I have successfully quadruple booted all of these in the past, but that may have been prior to the new motherboard. So that makes me think it could be something related to the motherboard but the thing is so much newer than what I previously had, certainly that can't be the problem...can it? Then I remember that Slackware boots, so if it's truly something about how the BIOS can't access some file beyond a particular section of the disk, then it doesn't make any sense that it can book slackware. Fedora is the first partition, Slackware is the last and is like 200+ GB into the disk.
View 8 Replies
View Related
Jun 24, 2010
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
View 9 Replies
View Related
Feb 4, 2010
I have installed both Windows Xp and Fedora 12. Last time when i was working on Fedora it didn't shut down properly. Now following error occurs and finally the system sleeps.
ata1.00 : exception Emask 0x0 Sact 0x0 SErr 0x0 action 0x0
ata1.00 : BMDMA stat 0x25
ata1.00 : cmd c8/00:00:50:5a:34/00:00:00:00:00/e4 tag 0 dma 131072 1n
res 51/40:7f:d1:5a:34//00:00:00:00:00/e4 Emask 0x9 (media error)
ata1.00 : status : { DRDY ERR }
ata1.00 : err : { UNC }
end_request: I/O error, dev sda, sector 70539985 JBD : Failed to read block at offset 5884 EXT4-fs(sda): error loading journal mount: wrong fs type, bad option, bad superblock on /dev/sda8, codepage or helper program, or other error In some case useful info is found in syslog-ty dmesg | tail or so
View 1 Replies
View Related
May 28, 2011
I installed the 64-bit version of Debian Squeeze yesterday and noticed when exiting either the XFCE or LXDE desktops by selecting Restart or Reboot, the computer does not reboot back to the BIOS and GRUB, it simply reloads Linux without rebooting the hardware - no warm boot. XFCE and LXDE are the only desktop environments installed.
The 32-bit version of Debian installed on other computers, correctly reboots the hardware when the same option is selected.
Is there a file I could look at (or perhaps add a particular boot parameter) that will force a proper reboot of the hardware when that option is selected, or is that how the 64-bit version is designed to work?
View 2 Replies
View Related
Jan 2, 2010
I've just bought a HP mini compaq laptop. The laptop doesn't have any CD/DVD "reader". So i was forced to download the .iso file to install ubuntu in addition to Windows XP that was present when i bought it. To do so i used UNetbootin, and i used my only hard disk as a live CD. But when i wanted to install ubuntu, they told me to create a partition. The problem is that i can't. I have only one partition sda1(nfst) which covers the whole stockage memory, and an empty space(8Mo). I can't acceed to any of the resizing or modifying options to edit the nfst partition. The only options are manage flags and umount. When i click on this one, they tell me : # umount /cdrom : cdrom is busy.
View 3 Replies
View Related
Sep 19, 2009
I am using Fedora core 10. I have changed my partition size of Linux from windows. After I finished resizing the partition, I rebooted my system to the Linux platform. While booting it gave me an
error: repair filesytem #1:
I don't know what to do?
View 5 Replies
View Related
May 3, 2011
I recently switched to the Ubuntu 10.10 version from the 8.04 version, and when I looked for the Drive and Volume tabs in the USB Properties dialog, they were no longer available. In 8.04, I used the Volume tab to set the mount point and file system for selected CompactFlash drives connected to the computer through a USB adapter. It is important that these selected drives be mounted as msdos rather than vfat because of the characteristics of the legacy system that they are used with.
how do I get the functionality I had in 8.04 under the Drive and Volume tabs of the device properties dialog?
View 1 Replies
View Related
Feb 21, 2011
I am getting this error when I try to install Debian in my Toshiba L650D Laptop.
[0.417999] [<ffffffff 814f3140>] ? early_idt_handler+0x0/0x71
[0.418045] [<ffffffff 814f351f>] ? kernel_init+0x0/0x1a2
[0.418091] [<ffffffff 81411ba0>] ? child_rip+0x0/0x20
View 4 Replies
View Related
Apr 19, 2010
After update/upgrade; previously existing RAID no longer auto-mounts.
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes[code]......
View 5 Replies
View Related
Dec 2, 2010
my ubuntu partition is not booting at all, GRUB loads fine but when select ubuntu, it is just a small white line (the terminal carrot thing).
View 4 Replies
View Related
May 2, 2010
I just pArtitioned my acer one netbook and installed fedora 12 to half my disk. Fedora is working just fine but when I try to boot I into 2 options. " completely restore system to factory defaults" and "restore operating system and retain user data". Should I do Any of these or should I reinstall windows?
View 9 Replies
View Related
