Ubuntu :: 10.10 Installed With WISE In Windows7 RAID0 - Root Filesystem Not Defined
Oct 25, 2010
i have a M1730 with 2 HD in RAID 0. Windows 7 64bit installed. I tried to install Ubuntu 10.10 with WUBI, all ok the installation in Windows. Restarted the system I have 2 multiboot options with the new Ubuntu... it starts but in graphic mode it tries to finish the installation and stops with an error message like that: "root filesystem not defined...".The problem is the raid0 of my disks or other?
View 5 Replies
ADVERTISEMENT
Mar 1, 2010
ive been recently experiencing some problems with my ubuntu studio 9.10 setup, with the filesystem failing to mount. after deciding to try a new hard drive and cable, as well as clean install ubuntu, fedora and now mint, im still finding no filesystem.im using a live cd created for mint (like it ). having clicked install to hard drive, all is well until the partition manager, where all the boxes are greyed out. clicking forward produces a box saying "no root filesystem defined". i see there are a few on here from a few years back and having read through them, cannot find a fix for myself.
View 9 Replies
View Related
Jan 10, 2011
Using Ubuntu 10.10, 64-bit, installing after LiveCD testing.sda3 can't really be erased due to its contents, something I can't exactly get back or transfer.
View 2 Replies
View Related
Jun 24, 2009
I would like to know the blocking methode In a Firewall or a Router.whether i will be done by Protocol wise, ho? or it will done through Host wise, How ?
View 2 Replies
View Related
Nov 17, 2010
I want to split file foo into two parts, and I only intersted in the first one. But the N bytes in which the first part consists, I want it to be an exact replica of the corresponding bytes of foo. More exactly:
Code:
foo foo1 foo2
==============================
90 90 05
[code]....
View 4 Replies
View Related
Mar 21, 2011
I ran into this and found a non-trivial solution so I thought I'd share in case anyone else ran into it.I have two 200GB drives so I thought I'd install my system with RAIDed partitions for /boot, / and /home. I would use RAID1 for /boot and /home because GRUB2 can load the kernel from a RAID1 and I thought the extra reliability for /home would be nice. (I may second guess /home on RAID1 once I get to test performance.) I chose RAID0 for / to provide faster application loading.I prepared the drives using a Live CD because I'm not confident that I can do what needs to be done during installation.First I partitioned the drives as:
Code:
hbarta@olive:~$ sudo fdisk -luc /dev/sda
Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....
At this point I could restart and boot from the system hard drives and proceed with configuring my system. I'm not positive that it is necessary to add the modules to /etc/initramfs-tools/modules but I do know that alone is not sufficient. An earlier attempt was to install grub (install-grub /dev/sda; install-grub /dev/sdb) within the chroot and I found that also was not sufficient. I have not listed it above because I think it was not necessary. But on these two issues, I'm not going to reinstall again from scratch just try...
[URL]
Another possibility is to install using the Alternate CD. I did not try that but it may provide better RAID handling. Last week I installed 10.04.2 LTS Server to a RAID1 and it did not experience this problem. However I do not know if it is RAID in general or RAID0 that led to the issues I encountered.
View 1 Replies
View Related
Oct 16, 2010
I have a Asus EEE PC 1005HA netbook, which I use with Windows 7. I've been abroad for the last 2 weeks, and when I came back I found out my younger brother has installed Ubuntu on it.
When I asked him he told me it's no problem, and he didn't overwrite Windows, just installed on another partition.
However, I'm trying to get back to my original operating system and I have no idea how. Obviously, he has none either as he is just an impulsive 15 year old.
I'd like to either uninstall ubuntu and return to my windows OS, or just choose at boot time which OS I want to access (I don't really mind having a linux onboard, I assume it has it's merits).
View 7 Replies
View Related
Apr 17, 2010
I installed 10.04 and Grub won't boot into Windows7. I attempted to fix the problem through several different methods and nothing worked and I fear I made the booting problem worse than it was to begin with. I can boot into Ubuntu just fine, just not Windows7. Black screen with a cursor upper left hand. Windows7 repair disk does not help and using Windows7 command line repairs did nothing.
So here is an idea I came up with: Is there any way I can back up the Windows partition exactly the way it is, reinstall Windows7, and then somehow lay down all that information directly over the install to make it exactly like it was?
I doubt it is that simple, but is that possible? Like basically unhiding all the hidden files, copying them into a folder on my Ubuntu installation, reinstalling Windows7 and just copying them all back?
View 9 Replies
View Related
Mar 27, 2010
When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
View 6 Replies
View Related
Apr 13, 2010
I need to know whether Ubuntu can be hacked when it is installed as a dual boot with W7 by hacking windows and getting access to the Ubuntu partition?
What I would also like to know if this way can be used to put a key logger or screen capture in Ubuntu which installs next time Ubuntu is started?
View 9 Replies
View Related
Dec 19, 2010
In other words, I somehow deleted the first partition of Windows7, the windows reserved system partition. WHat is the quickest way I can rescue this system? Client has been waiting for her machine a long time already, I have to delived today, no time to re-install windows7.
View 4 Replies
View Related
Oct 14, 2010
I've recently installed Ubuntu 10.04 64bit Desktop onto my 640GB hard drive. I used Wubi to download and install it onto a 100GB drive partitioned out from my 640GB hard. After I reboot and log into Ubuntu, it says that Roof File is Not Defined. The only thing I can do is to force my computer to shut down as so i did. After that I went to the demo mode of Ubuntu 10.04 as I can't do anything on the Normal Mode.
View 1 Replies
View Related
May 18, 2010
I have been using Ubuntu 9.10 Desktop version for around 1 month then i stoped using after installing windows 7, as I knew that there were the 10.04 version coming. So when it was released i went to torrent download the file and burned it on a cd. After that i insert the cd and use the wubi installer in there as i want to install them side by side. so after installing ubuntu i restarted the system and got into it. After a few minutes it appeared this error message "Not root file system is defined. Please correct this from the partitioning menu." So i was expecting it to be downloading problems. I went on to ubuntu website requested for a CD and it came today. So i inserted the cd did the same thing again.
View 9 Replies
View Related
May 11, 2011
Classic partition problem apparently. What do I do? the 11.04 wubi doesn't give a lot of installation options, so i just selected C drive, and gave it 10GB of space. instilled it, and when it goes to the desktop menu, that pop up appears saying No root file system is defined. Please correct this from the partitioning menu
In dual booting with XP. what do I do?
View 1 Replies
View Related
Aug 6, 2011
I'm trying to install 11.04 and get the error warning in the title. It says "Please correct this from the partitioning menu."How do I do that?I don't see any options for that.Puppy will already boot from that device and has grub installed.
View 9 Replies
View Related
Jul 28, 2011
iam new to linux i installed fedora 10 on windows7 ultimate 64bit after intallation the fedora system doesent boot, but windows7 work properly. i instlled fedora 10 in seperate fee partiotion
View 2 Replies
View Related
Jun 29, 2011
i installed an old hdd that i had laying around to my new desktop PC SO THAT I COULD USE IT SPECIFICALLY FOR UBUNTU. I FORMATTED IT THEN WENT TO RUN THE UBUNTU SET UP DISK.BUT I GOT THE MESSAGE "NO ROOT SYSTEM DEFINED" WHAT DO I NEED D
View 3 Replies
View Related
Jun 10, 2010
So I have an external hard drive (wd passport) that I want to install ubuntu on. I created 100gb partition via diskutility (fat32) and it seems I can't install ubuntu on this partition.
View 3 Replies
View Related
Jun 25, 2010
Has anyone found a fix for the "No root defined" when trying to install wubi on top of Windows 7?
View 1 Replies
View Related
Oct 20, 2010
When I tried to install 10.10 'side by side' with 10.04 and OpenArtist for triple booting I get the messageQuote:No root file system is defined. Please correct this from the partitioning menu.I don't have the screen in front of me now but what5 does it want me to do and how do I do it?
View 9 Replies
View Related
Feb 11, 2011
I'm having a problem and it seems like partitions during the dual boot install.
Here's EXACTLY what I get...
Menu: Allocate drive space
Erase and use entire disk
X Specify partitions manually (advanced) [X denotes I chose this option]
I have 3 partitions on my gateway laptop...
[graphical bar across the top]
sda1 NTFS - 10g - weird partition w/recovery software or something from Vista
sda2 NTFS - 140g - Windows Vista
47g FREE SPACE [this is where I want ubuntu]
[Code].....
I click "Install Now" and I get this error:
"No root file system is defined. Please correct this from the partitioning menu."
View 4 Replies
View Related
Sep 26, 2010
Output of my #alias command looks just as normal as one would expect:
Code:
alias +='pushd .'
alias -='popd'
alias ..='cd ..'
alias ...='cd ../..' .....
And still whenever I (as root) type in bash
#ll
which would be short for
#ls- l
i get output of the command
#ls -al
So where aliases for root overwritten? Usually I would expect .bashrc in the /root directory. Or at least .alias file. But there none of those in my current /root. So, my question is where root user gets it's aliases from? This concerns only root user. Normal user has .bashrc and I made up my own aliases in .alias and that's works jut fine. And yes I could make .bashrc file in the /root and .aliases where I would define my own things.
View 4 Replies
View Related
Feb 4, 2010
im trying to prepare my partitions for fresh installation. The partition manager didnt list anything with an error message that said:Quote:No root file system is defined. Please correct this from the partitioning menu?This is what Gparted displays Quote:
/dev/sda1 ext3 /tmp/boot
/dev/sda2 unknown
/dev/sda3 ext3 /tmp/opsys
View 14 Replies
View Related
May 3, 2010
I am running a RAID0 array, with Windows 7 Ultimate x64 installed.
When i install LL10.04 through Wubi, it installs fine, reboots, continues the installation procedure, then it gives me an error box "No root file system is defined".
I have attempted pressing the "OK" button 10 or 15 times, however it does not progress. The box just keeps on popping up. My only option is a hard reset.
I've tried downloading the latest version of Wubi from the official website, and allowing Wubi to download ubuntu itself, and still nothing.
I do not want to create a new partition for Ubuntu and use the GRUB loader. I have a multi boot system and would like to stick to the windows boot loader.
View 9 Replies
View Related
Dec 2, 2010
So I keep getting this error from the 10.10 installer:
"No root file system is defined. Please correct this from the partitioning menu."
However the partitioning menu shows no disks or partitions at all.
The disk browser can however see and mount both partitions from my disk.
It is a terabyte SATA drive and the bios has been set to IDE.
It has 2 partitions with windows installed on the first partition.
Gparted can see both partitions but claims it cannot find the mount point of the second partition. (both are NTFS)
I have attached a screenshot.
How to proceed from here so I can install Ubuntu.
View 4 Replies
View Related
Jan 22, 2011
I'm trying to install ubuntu on d partition i deleted, which now is "free space" but its giving me that error
So im guessing i have to click on add, what do what i click on? primary? beginning? end? ext 4 im guesing and which mount point?
Im installing it on d portition which i deleted and is now free space, i have windows 7 on c.
View 5 Replies
View Related
Apr 7, 2011
When I get to installation step "Allocate drive space" I get this message, "No root file system is defined. correct this from the partitioning menu." What is the source of this error and what do I need to do to correct it? I don't see a partition menu other than a choice of using the whole drive or a partition? Below are the choices that I have made. Specify partitions manually (advanced) Allocate drive space Choice are device (/dev/sda4) Type ((ext3) size) Mount Point (no choices offered) Size (42088 mb) used (670 mb) boot looder is sda Windows 7 ext3 42088 MB I am installing Ubuntu 10.1 on a seperate partition. Windows 7 is on another partition. The machine is an ASUS A52F Laptop
View 2 Replies
View Related
May 11, 2011
I am trying to install Linux Mint 10 on a newly formatted 40gb hard drive. I have not been able to get the the install program to see my hard drive. The program seems to work well off of the CD. I have checked the md5 sum and it is a good copy of the program. It will be the only operating system on a Athlon64 3200, PC Chips M861g mb combo. I have also tried Ubuntu with similar results.
View 9 Replies
View Related
Jun 19, 2010
if this is an error that has already been solved, but I am running Windows 7, and when I finish installing Wubi in Windows, it asks me to reboot. I select Ubuntu and it gives me the error: "No root file system is defined. Please correct this list from the partition menu." I can't get past this error.
View 5 Replies
View Related
Dec 21, 2010
My linux distro is CentOS 5.3. Today I edited /etc/sysconfig/readonly-root and set "READONLY" to yes, now my /etc/sysconfig/readonly-root file is like this:
# Set to 'yes' to mount the system filesystems read-only.
READONLY=yes
# Set to 'yes' to mount various temporary state as either tmpfs
[code]...
View 3 Replies
View Related
