Ubuntu Installation :: Can Expand The Installed Filesystem Partition
Jul 13, 2010
i installed ubuntu 10.04 with wubi on Windows 7. It works perfectly. And, i've only installed 5GB rather that 20GB in my partition (from the wubi option at the first time). I made this partition only for ubuntu but silly me i've installed only 5GB rather than to chose 20GB Now the ubuntu is low on disk space! it' only 120MB left from 5GB. My question is, is there any way expand it to 20GB so the partition is fully for home folder, etc? I want my 15GB!
View 6 Replies
ADVERTISEMENT
Nov 26, 2010
I have Ubuntu 10.10 installed along side of Windows 7 on the same partition. I'm a bit of a noob as I have only recently got serious about using Ubuntu daily. I was wondering how I could go about expanding the space Ubuntu can use seeing as how I don't have it set up as a separate partition.
View 5 Replies
View Related
Apr 27, 2010
I need to expand my ntfs and have ample GB, all taken up presently so if I create some unallocated GB's under ntfs how do I expand the ntfs partition. I have gparted live CD.
View 1 Replies
View Related
Aug 29, 2011
When partitioning disk devices for F14 on my new x86-64 box, I allocated 100G for / mounted on /dev/sda1. It's now 100% full. I have 365G free space available on the disk. Can I somehow extend /dev/sda1 to use some of this free space?
View 7 Replies
View Related
Jul 20, 2010
How to expand a partition size for which it was fixed.
View 2 Replies
View Related
Nov 20, 2010
I clean installed Ubuntu 10.10 by shrinking my Windows 7 partition slightly. Now that I want to expand my Linux partition, I shrunk my Win 7 partition from Windows OS. From Ubuntu, the partition manager shows /dev/sda1 contains the Win 7 and unallocated partition. /dev/sda2 contains the Linux and swap partitions. I can't seem to expand my Linux partition (ext4) in sda2 with the unallocated space in sda1. I also can't shift the unallocated space in sda1 to sda2. Any idea how to expand my main Linux partition with the unallocated space?
View 4 Replies
View Related
Mar 23, 2011
I am not sure where to post this so move please if its the wrong place. A few weeks ago i decided to try out Ubuntu, so I installed it as a dual boot, along with Windows 7. Now i have decided to switch fully to Ubuntu, so I have formatted the windows partition. Now however i am not sure how to allocated the unallocated space and expand the Ubuntu partition. Is even possible?
View 4 Replies
View Related
Jun 29, 2011
So, I wan't completely paying attention to the default partitioning that Red Hat Enterprise 6 does.
I was setting up a base image for VMWare and the disk was 200GB, but for some reason the default is for about 40% to go to the root partition and then the rest of it to go to /home (this doesn't include the 2GB or so in swap).
Is there an easy way to recover the space under /home and expand the root partition? Assume there are no user accounts created.
View 1 Replies
View Related
Feb 14, 2011
I want to install and dual boot ubuntu and windows 7. Now when I go to see what my disc looks like so I can shrink some partitions I see one unnamed one that has no filesystem already there. (See Picture). Now my laptop came like this, I never added the partitions, they were just there. So I was wondering weather or not I could install to that partition safely, as in I'm not overwriting some sort of important windows 7 thing.
View 2 Replies
View Related
Mar 10, 2010
I have a 300 Gb Hard drive, I used to have windows xp on it but decided to install ubuntu, so what I did (after some suggestions) was to create 3 partitions, one of 30 Gb for windows (I use Adobe software), one of 10 Gb for Ubuntu 9.10 and the rest as a common partition used for storage. Started ok, but I really got hooked with ubuntu and now my partition is full!. My question is ( and here is where I show my deep ignorance and shame): can I "expand" the ubuntu partition gaining space from the storage one? If not, how many Gb would you recommend for an Ubuntu partition? I'm using a lot of music/video/graphics production software.
View 9 Replies
View Related
Aug 24, 2010
I installed fedora 13 64 bit and it works great but I encountered several issues when setting up guest OS with KVM. The problem seems to be related to selinux. But let me first ask question about logical volume. By Default fedora created logical volumes:
[Code].....
"If you expect that you or other users will store data on the system, create a separate partition for the /home directory within a volume group. With a separate /home partition, you may upgrade or reinstall Fedora without erasing user data files." seems to suggest I have to create a separate physical partition and assign that to /home. But reading elsewhere it seems to suggest logical volume acts like a partition. My goal is to make it easy in case fedora is hosed and I have to re-install it without affecting /home where my cirtical data resides. Given above do I need to create a separate physical partition or I am just fine?
I have a second hard disk that originally had windows and all my data. Windows is hosed but I can see my data from within Fedora and Windows is gone and I created created new partition in its place which used ot be the C:/ drive appears as 53 Gb filesystem. My data which was originally D drive appears as 215 GB filesystem. As given in [URL] I want to create a new logical volume in 53 Gb filesystem which I want to use as space for virtual disk to install guest OS's in KVM. Currrently 53 GB filesystem is mounted as /media/3467BH89JK789 but this does not work well with KVM. how do I create this logical volume out of 53 Gb filesystem partition and add proper selinux info and do I add to vg_vostrolx volume group and in a different volume group?
View 1 Replies
View Related
Oct 17, 2010
I would like to expand my root partition to the left. I already moved my 100MB /boot partition overand that took like 12 hours with Gparted, so no way do I want to use it for my 60GB partition to gain another 2GB. Is there a faster way? (Besides wiping the partition, creating the new larger one and reinstalling Ubuntu? )
I've heard LVM might be good, but it sounds like I have to do that from scratch as well, and I'd rather not lose all my stuff and start over, I just want to clean up my messy partitioning.
View 1 Replies
View Related
Jan 3, 2010
like to know ow can check the intsalled program what partition has.How can i know it?
View 1 Replies
View Related
Apr 17, 2010
I installed 10.04 and Grub won't boot into Windows7. I attempted to fix the problem through several different methods and nothing worked and I fear I made the booting problem worse than it was to begin with. I can boot into Ubuntu just fine, just not Windows7. Black screen with a cursor upper left hand. Windows7 repair disk does not help and using Windows7 command line repairs did nothing.
So here is an idea I came up with: Is there any way I can back up the Windows partition exactly the way it is, reinstall Windows7, and then somehow lay down all that information directly over the install to make it exactly like it was?
I doubt it is that simple, but is that possible? Like basically unhiding all the hidden files, copying them into a folder on my Ubuntu installation, reinstalling Windows7 and just copying them all back?
View 9 Replies
View Related
Mar 8, 2011
I just installed ubuntu on a partition on my laptop that already had a windows7 partition. First I had Kubuntu installed, but I decided to just try Ubuntu instead. I did things the right way when I installed Kubuntu and I could switch between OSes on reboot. Then when I installed Ubuntu I accidentally put grub on /dev/sda1 instead of /dev/sda. I didn't even notice for a while because I never felt like I needed to go back to Windows until I felt like playing starcraft 2. That's when I noticed that when the boot options screen appears and I select Windows, the screen goes black, a cursor flashes in the upper left corner for about a second, then the boot options screen reappears.
If I boot using my windows 7 cd and go into recovery, get a command prompt and type Bootrec.exe /FixMbr and Bootrec.exe /FixBoot, the options appear to complete successfully, but then when I reboot, I get a permanent flashing cursor.
If I follow that by inserting my parted magic cd and running testdisk and overwriting the mbr, I get back to the first situation where the boot options screen will appear, but the windows boot loader just returns me to the boot options screen. I can get into ubuntu, at least. Whenever I run testdisk I can't replace the boot with the backup boot because I'm pretty sure it's identical to the flawed one.
View 9 Replies
View Related
Sep 2, 2010
I am not been able to re size the partition. Can anyone please help. I tried to re size and install ubuntu 10.04 on two machines but it did not work. Details are HP mini ( windows xp pre installed with new ntfs partition). Lenovo thinkpad ( windows vista pre installed).Is new windows partition is non - re sizable?
View 7 Replies
View Related
Oct 28, 2010
I'm looking to move my 10.04 installation from an 80 GB HD to a 250 GB HD.
Last week, I successfully moved a Windows system from an 80 GB HD to a 320 GB HD using Clonezilla. However, I must have missed a command option, as I wound up with only 80 GB used on the new drive, and the remaining space unused. I used PartedMagic to resize the partition to use the full space, and all is now well.
Back to my Ubuntu move, on the second machine, I currently have three partitions - /, /swap, and /home. I'd like to expand / just a small amount, leave /swap sized as it is, and give most of the drive space to /home (as that is where I am running out of space). I think I have two options:
Option 1: Use Clonezilla to clone the drive (3 partitions), and then use PartedMagic to move/resize the partitions as desired.
Option 2: Use PartedMagic to set up 3 partitions to the sizes I want, then use Clonezilla to copy to the new partitions.
Option 1 seems to be the easier way. But, is there another option, a better way? Perhaps there's a command option in CloneZilla that I'm just not seeing, which would allow me to do the move in one step?
View 7 Replies
View Related
Oct 25, 2010
i have a M1730 with 2 HD in RAID 0. Windows 7 64bit installed. I tried to install Ubuntu 10.10 with WUBI, all ok the installation in Windows. Restarted the system I have 2 multiboot options with the new Ubuntu... it starts but in graphic mode it tries to finish the installation and stops with an error message like that: "root filesystem not defined...".The problem is the raid0 of my disks or other?
View 5 Replies
View Related
Sep 24, 2010
A few days ago I decided to try a linux OS for the first time. Following a how-to advice, I created a ~80gb partition (on a 320 gb sata disk) for Win7 and installed it. Then I installed Ubuntu 10.04, chose to make partitions manually, created a primary ext4-partition (right after the one with Win7) for / and a 1024mb swap partition. So now the disk is parted this way: 512 booter - Win7 system, ~ 80gb ntfs - Ubuntu /, 8 gb ext4 - Ubuntu 1 gb swap - file storage, ntfs ~240 gb (created using Win7 bootable disk, but the issue from below started before this).
After the installation the boot loader failed to load any system, giving the error from the topic title. I tried several ways to reinstall/repair/reconfigure grub in the live-CD mode. Some of them didn't change anything, others were not completed because of an update-grub error ("cannot find a device for / (is /dev mounted?)"). Grub version is 1.98b. The disk with Win7 and Ubuntu is treated as hd0 in grub and sdd in Ubuntu
ote: even though the thread is marked as SOLVED, the issue is actually not. I have managed to dual-boot Win7 and Ubuntu, but with partition configuration changes
View 14 Replies
View Related
Aug 6, 2010
I need to resize an ext4 filesystem partition, How can I do it being sure it wont get f#@ked up?
Is it safe to do it using a gparted live cd?
View 3 Replies
View Related
Oct 5, 2010
I have recently updated my ubuntu 9.10 install to 10.04. And with that I've tried to install snow leopard on my computer so i can dual boot between them.the install was successful, but grub2 (that worked fine) wouldn't see the OS X install on its own partition. so i tried reinstalling it, like you do after you install windows and it would remove grub as the bootloader.That didn't work and i got a lot of messages that it wouldnt work because my partitioning (or something like that) is GPT. by the end of it i didn't have grub installed at all!so i started playing around with GParted, and while doing that i also put a bios_grub flag on my main ubuntu install partition, thinking that it would force grub to load from that partition. But that just gave me the GRUB Rescue prompt when trying to boot.
So i unchecked the bios_grub flag. and now it doesn't boot to anywhere and when inserting the ubuntu live cd i cant even see the ubuntu ext4 partition and mount it.Gparted says that its a partition that its File System is undetectable and unknown.Is there any solution that will allow me just to mount that partition and copy files from it? (unfortunatelly my backups are a little older than i would like them to be)Heres what boot info script gives me: (the partition that i need is sda1)
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 4 Replies
View Related
Apr 11, 2011
I recently did a clean install of 11.04 Beta, and I must have done something wrong with the mount points during installation, which resulted in me having a different home folder mount point or something. The old partition on which I have my home folder needed to be mounted manually. I did that once, and then upon reboot, I couldn't access the partition anymore. Disk Utility now shows the partition as "unknown filesystem".
The output of fdisk is as follows (if that helps at all):
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
On a side note, I tried using TestDisk to restore the partition, but I only created a DD image of the damaged partition, but now I'm stuck, as I'm not sure how to mount it, or if it's possible to retrieve files if I succeed in mounting the image.
View 7 Replies
View Related
Mar 13, 2010
I am installing Ubuntu 9.10 on my computer and I get the following error:
"the ext4 file system creation partition #2 of Serial ATA RAID nvidia_bjfefgci () failed"
I followed the following instructions to prepare partitions [URL] and allocated 10,000 MB for swap, 245,000 MB for the one with / mount point and 245,000 MB for the one with /home mount point. I have two 250GB HDDs.
View 14 Replies
View Related
Jun 30, 2010
I'm resizing an ext4 partition from 100gb to 40gb (I only used 20gb of it or so). Lets say partition is at /dev/sda1. I used
Code:
efsck -f /dev/sda1
to check it
Then I did
Code:
resize2fs -p /dev/sda1 40G
to resize it
When I check fdisk -l, the partition is still 100gb. I have a feeling I resized ONLY the filesystem to 40, but the partition is still 100gb. How do I finish this?
View 9 Replies
View Related
Dec 2, 2010
I'm a complete newbie, trying to get away from Windows Vista! I had some issues installing Ubuntu, but finally got it sorted - so I thought. I wanted to view a dnl file, so tried to boot into Windows, and I got a white screen with big red letters saying "ERROR". So I held down the off button for 5 seconds, and then tried to reboot. But now all I get is the words:
error: no such partition
grub rescue>
Before I go further, I'll summarise the problem with my install. Basically it would only get partway through, if at all, and then all the options would freeze...I could move the mouse, but that was it. Similarly with running Ubuntu on the LiveCD. After a lot of hassle, and some helpful members of the community, it turned out that all I needed to do was use the option "nomodest" when installing, and it all went fine. Well actually I had to retry it again in recovery mode because I think maybe a driver wasn't loaded (?), but after that everything seemed alright. So as mentioned before, I've come to my present issue. Typing "Is" gives "Unknown command" (or maybe "invalid"...I can't remember). And if I type "set" I get something like "prefix=..." and something else...sorry I can't remember and I don't want to turn off the computer now just in case things don't work again.
Anyway I managed to boot and run Ubuntu using the LiveCD, and started looking for solutions. Note that I used the "nomodest" option again to boot. Anyway all the solutions involve first using "fdisk -l" to find the partitions. Here is the output:
[Code]....
View 7 Replies
View Related
Feb 27, 2011
As per these instructions, I got up to the end of the "Acquiring an Ubuntu filesystem" step (where it asks you to mount the newly created Ubuntu partition) and ran into a problem: The partition won't mount, as the file system type cannot be determined because I cannot remember the file system used during installation. Is there any command that prints the file system type of GPT partitions?
View 5 Replies
View Related
Nov 26, 2010
I have newly created filesystem on one of my partitions. After that I am not able to paste anything into it. What is the reason?Even after mounting it also?
View 12 Replies
View Related
Apr 16, 2010
How can I shrink a partition to the filesystem size?I copied my ubuntu installation via dd from a smaller partition to a little bit bigger one to have all the same settings and programs and upgraded the distribution afterwards. Now the filesystem is smaller than the partition size. It would be nice to have both partitions have the same size so I could copy back the newer distribution someday ...GParted recognizes the new partition as 27 GB, the filesystem is just 25 GB.Is there a nice way to resize the partition to exact the size of the filesystem so that the filesystems remains untouched and no data might me lost?
View 4 Replies
View Related
May 18, 2011
I am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage
*Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
View 2 Replies
View Related
May 27, 2011
I had installed ubuntu 11.04 on my system along with windows vista. After a few days, i decided to remove ubuntu so i just logged into windows and formatted the ubuntu partition using the windows partitioner, then extended my main c: drive to span the whole disk so that i was left with a single partition with only windows vista on it.Later when trying to restart my system couldn't log back into windows.I kept getting a prompt sayinggrub rescue>After googling around a bit i shrinked and created another partition the disk again and installed ubuntu on it again.still. =/GRUB doesn't show any windows entry.I noticed something strange though that when i tried viewing my partitions using parted i didnt see any filesystem type listed besides my windows partition (/dev/sda3). I doubt that is why GRUB does not show any windows entry.Also i manually tried to boot into windows from the grub prompt using commands...root(hd0,3)chainloader +1bootbut it says 'invalid signature'Did i somehow corrupted my windows partition during resizing and installing/un-installing? Plus i also booted with the windows installation dvd and when i typed bootmgr /fixbootit said something like no valid filesystem found.
View 5 Replies
View Related
