I just pArtitioned my acer one netbook and installed fedora 12 to half my disk. Fedora is working just fine but when I try to boot I into 2 options. " completely restore system to factory defaults" and "restore operating system and retain user data". Should I do Any of these or should I reinstall windows?
View 9 Replies
I have upgraded my F8 installation to F10 installation recently. After this upgrade, I am able to access the windows partition, and add remove files in the same.Today, I tried booting into my windows partition and I was unable to boot into it. My laptop tried to boot into it, but crashed and came back to the grub selection screen...I did not have this issue previously, with other Linux installations..
View 8 Replies View RelatedI have a system on which multiple operating systems are installed. Let's say:
C: Windows
D: Linux
I have a bootable USB drive, using which I can boot both into to Windows and Linux. I don't want to use this USB drive any more.
Is there any way I can create the same image as that of the USB drive on a new partition (e.g. E:), so that the system will then boot from that partition?
install Grub or some other popular multi-OS selectors; I have to boot from my own partition having the same image as the USB drive.
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
I got an old Sony Vaio from a friend & wanted to keep a stripped down version of windows along side 10.04. During installation when I saw two Windows partitions. I saved the first one which was about 5 gig & deleted the other bigger partition & used ext4 on the free space for Ubuntu. I assume I only kept the recovery partition so basically I have sda1 (recovery partition)ntfs & the rest ext4. If I pick Windows from the grub menu at start-up the recovery starts but then shuts down with an error. I'm assuming its looking for the other ntfs partition to install & can't find it but I'm not sure what to do. I haven't done anything with Ubuntu yet so deleting & reinstalling is not a problem but if I do getting back to the restore menu probably will be. I don't have any disks that came with the computer either.
View 8 Replies View RelatedI have an old linux partition (fedora 10) that used to start from the MBR. Now I've installed windows 7 on a new drive (overwritning the MBR, autostarting windows). Is there a neat program availible that somehow enables me to choose to boot back into linux?
View 2 Replies View RelatedI have just updated my Ubuntu linux to Ubuntu 10.4, not my grub menu isnt letting me boot to Windows Partition.The problem seems to be with grubs new update from using an editable menu.lst file to using a non editable grub.cfg file. Everywhere I look it states "DO NOT EDIT THE GRUB.CGF FILE". I am at a loss as what to do. I figured that the new configuration has screwed up the Windows Boot File. Anyone have any suggestions on how to fix this. I am not sure if it is a windows issue or an issue with the Grub boot menu.
View 2 Replies View RelatedI have Vista Home edtion and Linux, I have formatted Linux partions and now that Grub is not letting me boot into Windows..I had C:wIndows D:New Volume and rest of the space was E:
View 5 Replies View RelatedWhilst in fedora i deleted files off my second hard drive to free up some space, i deleted over 10gb worth of data. When booting back in to my windows partition it doesnt recognize the free space instead it thinks the hard drive is still full even though i deleted the data.Not to sure as to why this has happened, as im sure i have deleted stuff of this hard drive before from my linux partition.Any help would be greatly appreciated as my 70gb hard drive is full with only 20gb of data to show for it
View 2 Replies View Relatedmy ubuntu partition is not booting at all, GRUB loads fine but when select ubuntu, it is just a small white line (the terminal carrot thing).
View 4 Replies View RelatedI have tried ubuntu 9.10 for 2 months, and I really liked it. So I decided to get rid of my Windows XP and expand my 10 GB linux partition to 146 GB. So I used GParted. I backed up the windows on some hard drive, and copied the 10 GB partition to the 146 GB partition (so I had the same data twice on my laptop). Here is a screenshot of my partitions
When I restarted, I booted normally to find myself in the 146 GB partition (which is great). The next time I booted normally to find my self back in the 10 GB partition. Every time I try to boot now I end up in the 10 GB partition. I'm a noob, but I guess it has to do with the configuration of GRUB to boot to one partition not another?
Two days ago I repartitioned my laptop HD and added the latest Ubuntu (2.6.35-25-generic) to the existing Vista and existing Ubuntu (2.6.32-28-generic via upgrades from 9.14(?)). Prior to this install it was using Grub with menu.lst from the old/upgrade Ubuntu. After the install the boot menu labels the partition with Vista as the Windows Recovery partition and the recovery partition item is no longer present.
At first I wondered how I could get Vista to boot. I found that SuperGrub cd would boot it OK. Then, it dawned on me that the boot menu item was not the recovery partition, but instead the Vista OS partition mislabelled . Vista loads just fine from it. The recovery partition is no longer listed as it was with Grub/menu.lst. SuperGrub will not boot the recovery partition, showing an error "missing BOOTMGR".
'os-prober' produces--
root@Toshiba:/home/deh# os-prober
/dev/sda2:Windows Recovery Environment (loader):Windows:chain
/dev/sda7:Ubuntu 10.04.2 LTS (10.04):Ubuntu:linux
[code]...
I edited boot/grub/grub.cfg so the boot menu item is labelled correctly, but suspect that it will revert back when there is an upgrade.
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
I can't boot to Windows XP after recently installing Ubuntu (Ubuntu boots fine). The error that comes up (straight after selecting XP) is that it can't find "system32hall.dll".
Reason for the problem: Ubuntu is looking at the old, corrupted version of XP that I have. The 'real' version is on another partition, for reasons too lengthy to explain. Note: neither of these partitions were touched when installing Ubuntu - I placed Ubuntu in the pre-existing partitions I had setup when installing previous versions of Linux (last was Mandrake 8.)
Now, I can understand why it is looking at the old version, because it is on the first partition of the hard drive, "dev/sda1", the new version is on "dev/sda3" (nomenclature according to Ubuntu, obviously).
Question: How do I point the config file to sda3? I have tried setting root to "hd0,3" and "hd3,1" with no luck. Original code is below:
Code:
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
[Code]....
I installed 10.04 and Grub won't boot into Windows7. I attempted to fix the problem through several different methods and nothing worked and I fear I made the booting problem worse than it was to begin with. I can boot into Ubuntu just fine, just not Windows7. Black screen with a cursor upper left hand. Windows7 repair disk does not help and using Windows7 command line repairs did nothing.
So here is an idea I came up with: Is there any way I can back up the Windows partition exactly the way it is, reinstall Windows7, and then somehow lay down all that information directly over the install to make it exactly like it was?
I doubt it is that simple, but is that possible? Like basically unhiding all the hidden files, copying them into a folder on my Ubuntu installation, reinstalling Windows7 and just copying them all back?
Am trying to format my SD card and creat a FAT32 partition for booting
after following procedure i was stuck with the below command
Command (m for help): [t]
Selected partition 1
Hex code (type L to list codes): [c]
Changed system type of partition 1 to c (W95 FAT32 (LBA))
i don't have the [c] option or any "W95 FAT32 (LBA)"
This is my partition table:
/dev/sda1 1 4255 34178256 83 Linux
/dev/sda2 4256 4437 1461915 5 Extended
/dev/sda3 * 4438 9964 44395627+ 7 HPFS/NTFS
[code]....
I have an Acer Aspire Netbook running a dual boot with Xp and Ubuntu Netbook Version (Lucid Lynx if I am not mistaken?) Anyway I plan on selling this netbook and I need to remove the Ubuntu Partition and go back to just a full Windows Xp partition with it's recovery partition also.
View 2 Replies View RelatedI tried installing Ubuntu 10.04 LTS on my girlfriend's lenovo using a live disc. First we tried it out to show her the wireless would work fine (her previous lenovo was not ubuntu friendly at all). She's interested in keeping her windows 7 partition along with the lenovo recovery partition, so I tried doing a dual boot install. I manually moved the cursors setting the disk space on each partition, and we allowed Ubuntu to do the rest. Much to my dismay, the installation failed.
I've done some reading over the internet, and I think in our case it would be best to use a Wubi installation. We're interested in using 10.04, so where can we find a wubi installer of Ubuntu 10.04?
Also, any ideas why the installation might have failed? The iso was downloaded off the ubuntu main site, and we burned it using infrarecorder.
I am having issues with Grub 2 after installing Debian 7.8.0.The computer is a HP Pavilion 500-307nb. I made the original harddrive /dev/sdb and inserted a Samsung Evo 840 as /dev/sda. From the original hard drive (/dev/sdb), I wiped the windows partition, but left all other partitions unchanged (in case I would ever want to recover the desktop to its original state). I replaced the wiped windows partition with a swap partition and an LVM partition.These are my hard drive partitions:
/dev/sda (Samsung Evo 840)
Number Start End Size File system Name Flags
1 1049kB 3146kB 2097kB primary bios_grub
2 3146kB 944MB 941MB ext4 boot
3 944MB 94.4GB 93.4GB host lvm
4 94.4GB 1000GB 906GB guests lvm
[code]....
The partition /dev/sda3 has 2 logical volumes with filesystem ext4 that I mount to / and /home.The partition /dev/sda2 is mounted to /boot..When I install like this, Debian installs fine, however Grub2 is not installed correctly.Debian installs grub-pc which seems not able to boot the gpt partition. So I boot the Debian CD in rescue mode and execute:
mount /dev/sda2 /boot
aptitude purge grub-pc
aptitude -y install grub-efi
After rebooting, I come in the grub rescue shell, which says: error: no such device: 986f2176--4a4b-4222-83b9-8636a034b3c7.
When I then enter in the grub rescue shell:
set boot=(hd0,gpt2)
set prefix=(hd0,gpt2)/grub
insmod normal
normal
Grub and Debian start up correctly.why can Grub not start up automatically correctly? Where does the UUID 986f2176--4a4b-4222-83b9-8636a034b3c7 come from? I have reinstalled Grub several times, I have reinstall Debian several times, I have even wiped all partitions from /dev/sda and recreated a new gpt table with parted and manually set the partitions in parted. Still on each reinstallation, Grub fails because it cannot find exactly the same UUID. Since this UUID is always the same, it must be stored somewhere, but it cannot be the partitions, I have wiped them and the partition table several times.
I did though a firmware update of the Samsung Evo 840 before reinstallation, could this be a cause?Also the problem is not in grub.cfg. Grub starts correctly if I enter the commands above in the grub rescue screen and the UUID value does not appear there.
I have a Dell VOSTRO laptop that I use for windows Vista. I have an old disk drive that I put into a USB case and now I want to use that for a Debian system. I do not want to install grub on my laptops HDD, if I do I need to have the USB HDD plugged in everytime I boot and i find that a real pain. I installed Debian on the USB drive with no problem and when it asked where I wanted to install GRUB I picked the USB drive ( I think ). Now when I interupt the boot and tell it to boot from the USB drive grub comes up with the correct menu but when I pick Debian I get the following messages:
Booting 'Debian GNU/Linux Kernel 2.6.26-2-amd64' root (hd1,0) Filesystem type unknown partition type 0xde kernel /boot/vmlinuz-2.6.26-2-amd64 root=/dev/sdb1 ro quiet Error 17: Cannot mount selected partition
I installed XandROS on my vista machine. I can access the Windows partition from Linux but in Vista I cant see the Linux partition...is there anything I can do about that?
View 3 Replies View RelatedI have a Lenovo thinkpad T400 with Vista x64 that I want to dual-boot with fedora 10. The T400's original config has 3 primary partions:
1) Vista boot partition (some weird partition that it only uses to boot... this is my first time using Vista so I don't know the details, but I think it has to be there and it has to be a separate partition from the "data" partition)
2) Vista data partition
3) Lenovo Rescue and Recovery partition (a separate bootable partition that is used for recovery, backups, ...)
My first attempt was to shrink the recovery partition and add a new extended partition that has the two standard fedora logical volumes and an extra NTFS to be shared between the OS's (I usually use FAT32 for this one, but NTFS support seems to be pretty solid now).
Everything was fine, but I couldn't boot into the rescue partition. According to this site:
[URL]
You *have* to have a linux boot partition be your primary partition. Other people have told me the same thing and that site has an explanation, but I don't get it =)
So, it seems that I need 5 primaries (3 original vista/lenovo primaries, 1 linux primaray to put the boot stuff into, and 1 extended for everything else) to make this work (which is not possible). Can anyone think of something else I could do (other than getting rid of Vista and the Lenovo stuff and giving them both the finger?) I'm thinking maybe I could make an extended partition and move one or more of the Vista/Lenovo partitions in there, but I'm not sure if they could boot.
I'm trying to achieve my dream (but indeed not perfect) boot scenario: dual-boot OpenSUSE and Fedora with shared /boot, /home and SWAP partitions. First I installed OpenSUSE (sda3 on my layout below) with separate /boot (sda2), /home (sda5, encrypted) and SWAP (sda6), next I installed Fedora on /dev/sda1, and pointed it to mount sda2, sda5, sda6 with respective mount points, without formatting. I proceeded with the installation without installing new GRUB bootloader (overwriting an existing one).
It was successfull and now I'm back in OpenSuSE trying to edit menu.lst file (under /boot/grub) to make GRUB boot Fedora.
I attached a copy of menu.lst I cooked up for now. OK, it's a mess. Life would be allot easier if I didn't have a separate /boot partition, as I could just chainload, but it's no longer possible (or is it?). May be I needed to specify the resume device or problem is in initrd? below are the contents of /boot:
The problem is, on a machine, you can only have 4 primary partitions. sda1 and sda2 are my Vista and Recovery partitions respectively, which eliminates two of my primary partitions already. I myself have never used logical partitions, and was wondering if any of the partitions the Beginner's Guide recommends (/, swap, /var, and /home) could be made logical, and if I even need a swap partition.
View 5 Replies View RelatedI'm a noob when it comes to this kind of stuff, so bear with me. Ok so my computer has 4 hard drives, a 640gb, 500gb, and two 320gbs. I have the larger two on a raid 0 array, which is also where I have windows installed. I installed Ubuntu on one of my spare 320gb drives, so that I wouldn't have to worry about partitioning. But now every time I boot my raid array in order to boot windows, grub will load and my computer will boot Ubuntu instead.
View 1 Replies View RelatedI have installed Ubuntu 10.10 in Dell Inspiron 1525 which was having Windows 7.Now when i select Windows entry in GRUB menu for booting the OS is not getting loaded instead it goes to the GRUB menu again. The same happened in my Home PC with Windows XP.Please tell what i have to do for fixing the error.
View 9 Replies View Relatedyesterday i installed Ubuntu 10 and the installation was successful. When I rebooted my system to access my other OS which is Windows 7 from the drop down menu (see the attachment) available on the boot screen i'm unable to go to Windows 7 and it restarts again, goes to the same menu where i have to choose the OS. Even after several trials i'm still unsuccessful to boot my windows.
View 7 Replies View RelatedI have Ubuntu 10.04 and Windows XP running each one in a partition of two different hard drives. I want to install Windows 7 in a second partition of the hard drive where Ubuntu is running. Windows 7 did not see the hard drive where Ubuntu is running. So I understand that I need to format the partition where Ubuntu is running, install Windows 7 and later on Ubuntu 10.04 which will create the boot for the three systems. But I want to backup Ubuntu's installation, and after installing Windows 7, install the backup. So I will need to add the file for the dual booting. How can I do it? Is it there any piece of software that could create the three booting option that I need?
View 1 Replies View RelatedI have booted from the .iso cd I made on my Mac last night and was tempted to install it on a 6gb partition that I have on my main HDD but was a bit scared to go past the fourth (or so) step in manual installing where I pick that partition and *do what?* Is it going to install the OS on that partition and leave everything else alone to give me a dual booting PowerMac? It doesn't quite say. I am fearful of screwing up my little ol' machine. Can anyone direct me to something that gives a step by step in manual installation on an already created (HFC+) partition to create a dual booting PowerMac?
View 3 Replies View Related
