OpenSUSE Hardware :: Xerox Phaser 6010 USB Printer Not Detected?
Jun 21, 2011
I'm running OpenSuse 11.4 and trying to connect a brand-new Xerox Phaser 6010 printer through USB.
I started by trying Yast>Hardware>Printer>Add, but no printer was detected. I tried "Detect More", but still no printer was detected.
The USB cable is connected, the printer is turned on, and /dev/usb/lp0 exists. There is only one printer on my system, so this must by my printer device; indeed, it disappears when I turn off the printer. Also, the printer works nicely under Windows, so there is no hardware problem with the printer itself.
I tried removing and reinserting the usblp module (using `rmmod usblp; insmod usblp`), but still no printer. Cups does not seem to find it.
I also tried explicitly specifying a URI for the printer using ConnectionWizard>SpecifyArbitraryDeviceURI usb:/dev/usb/lp1, selected the Xerox Phaser 6010 driver (which is present in the list) and tried to print a test page, but nothing happens.
What other options are there to figure out what is wrong and get this printer to work under OpenSuse?
View 9 Replies
ADVERTISEMENT
Oct 1, 2010
i am trying to install this printer on my centos installation and could not i have the drivers but cannot install
View 1 Replies
View Related
Dec 13, 2010
I'm trying to get a Xerox 4150 printer added to Ubuntu 10.04 and having troubles. I downloaded a wad of printer PPD files and it has worked on all but this Xerox 4150 printer. When I provide it with Xerox's ppd file, I get the following error...
Failed to read PPD file. Possible reason follows:
/somepath/xr_WorkCentre4150.ppd: FAIL
**FAIL** Unable to open PPD file - Missing option keyword on line 30.
Has anybody had luck with either installing this ppd file or some workaround to get the Xerox 4150 installed?
View 1 Replies
View Related
Aug 2, 2010
I have an epson cx7800 printer/scanner that 11,3 doesn't detect on USB. I tried Yast-Hardware-printers and Yast-Hardware-printers and nothing is discovered/detected.
Are there repos for this stuff and is there a tutorial like the one for graphic card theory I could peruse?
View 3 Replies
View Related
May 2, 2011
Need to get a 2nd display for a PCMIG 1.0 passive backplane with an Advantech 6010 CPU [onboard video works fine], but NO PCI card will come up as the 2nd display! Tried 11 cards and most leave the cursor at the top corner when doing xorg-configure, but no that's all.
Has anyone gotten a 2nd display to work on a passive backplane system? Tried some newer cards, but they don't even allow the system to POST - perhaps because they are PCI 3.0 and the backplane is PCI 2.0 or 2.1?
View 9 Replies
View Related
May 3, 2010
I have a problem with Ubuntu and my USB printer no longer being detected. I have installed 10.04LTS (clean install) and then added kubuntu-desktop using Synaptic.My USB printer (EPSON DX4050) is now not detected when I book into GNOME or KDE session, but IS detected if I boot using a LiveCD.
View 1 Replies
View Related
Aug 21, 2010
I just installed 10.04 on my neighbors computer. They have an HP LaserJet 5MP. Sometimes it detects the printer other times (most of the time) it doesn't recognized the printer. I've triple check the cables and powered down restated the computer about 10 time with the printer on and it's not showing up.
View 1 Replies
View Related
Jun 27, 2011
Ok, using gnome3 in F15. I'm going in to add my printer. I hit "network" and it searches for about 20-30 seconds and then stops. It's not picking it up.
View 8 Replies
View Related
Oct 8, 2010
Why doesn't the latest version of ubuntu find my printer?
View 3 Replies
View Related
Jan 11, 2010
I have a Epson Stylus SX115 All In One Printer which i connected to ubuntu 9.10 the other day. Upon installation the drivers for the stylus SX 115 were not available, but there were drivers for the stylus SX110 which i then installed. Printing is fine although for some reason even though i connect via usb cable the printer is not detected as a external device. I have to pull out the usb cable without unmounting-what should i do?
View 8 Replies
View Related
Mar 17, 2011
My work has just removed our nice easy HP Postscript printers, and replaced them with Fuji Xerox ApeosPort-IV C5570 machines. All very nice, I'm sure, except that Fuji Xerox doesn't support linux - their web site provides printer drivers for Windows & Mac only.
how I can print to these printers - is there a third-party driver which will work?
View 1 Replies
View Related
Oct 11, 2009
I try to print with an HP 14000 PSC on Fedora 11. The printer is detected, send a document, it goes on the queue but does not get printed. The status is stopped. The printer status stay on idle with /usb/lib/cups/filter/foomatic-rip failed. I try to restart the printer, unplugged reboot; nothing. I used the same printer on F10 was working fine.
View 3 Replies
View Related
Jul 16, 2010
I have just installed Ubuntu 10.04 LTS on my AMD 64 bit desktop. I have a usb connection for my Brother MFC 8860DN printer. I used the synaptic package manager to install the printer drivers ubuntu already had in their repository for my printer model. When I connect my printer to the computer Ubuntu recognizes the model, but cannot detect the printer drivers I have already installed. The printer drivers were installed to /usr where a Brother folder was created. the Cupswrapper and lpd files are in the Brother folder. How can I get the system to detect its own files so I can get the printer to work?
View 9 Replies
View Related
Jun 2, 2010
I have Canon MX860 Multifunction USB/Wireless printer that I am trying to add in Fedora 13. Looking under Desktop > Computer via USB connection, the printer is detected as some hardware device I can mount and unmount. However, when I am trying to add this printer via System > Administration > Printing, the printer is not detected at all nor can I add. FYI, this printer works fine in Ubuntu 10.04 LTS. How I can make this printer working in Fedora 13?
View 5 Replies
View Related
Mar 8, 2011
for some reason, ubuntu cant see it anymore. so how to fix? windows still prints to this printer on the network. I deleted the printer in ubuntu and tried to redetect and now it says no printer at that address.
before I deleted it, I recall it saying something about the backend had failed?
View 1 Replies
View Related
Aug 26, 2010
I am unable to add my USB printer via the YaST2 Printer Configuration setup tool in openSUSE 11.3. The printer, a Dell Color Laser 1320c, was last used with openSUSE 11.2, and setup was entirely uneventful. No driver is provided by Dell, so I used the Fuji Xerox DocuPrint C525A Linux driver. The problem: To add a print queue in 11.3, a Connection must be specified (parallel, USB, network, etc). However, the configuration wizard fails to show the presence of the USB print device.
[Code]...
This printer was working just eight weeks ago under 11.2, and 11.3 is obviously able to detect its presence and identify it correctly. I feel certain the solution is simple, but I haven't found documentation that provides the answer.
View 7 Replies
View Related
Jun 23, 2011
I am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.
View 5 Replies
View Related
Feb 1, 2010
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies
View Related
Jan 3, 2011
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Jan 7, 2010
is it possible to install a netwerk printer, while not connected to the netwerk where the printer is?I installed opensuse on my sisters desktop and I want to install the printer that she and my parents are using at home. Is this possible?De printer is in a windows workgroup and shared. De name of the workgroup is DEROON and the name f the computer the printer is connected to is Nico
View 4 Replies
View Related
Jan 17, 2010
Having made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
View 9 Replies
View Related
Mar 1, 2010
My sound stopped working! (after a fresh install, explained below)I just installed the latest release of openSuse. Right after installing, I ran the updates tool and got all recommended updates. All fine.I then installed my ATI catalyst drivers. Rebooted a couple of times. All fine.Everything was working 100% (including sound), I then rebooted, now something is wrong.Now my sound is not working, I right-click the speaker icon in the taskbar, and to my surprise my soundcard is not listed like it was just before. It used to show up as an X-fi card, which was correct.
In Yast, I go to sound, and in the hardware section, there is nothing there, my soundcard is not listed. I tried to add a soundcard in Yast, (creative xfi) but it wont install, I get some IRQ error.I'm all out of ideas. I'm a new to using linux, but I know my way around the console.I have trolled through the internet for hours to no avail
View 7 Replies
View Related
Jan 22, 2011
I got some troubles with my external VGA output of a Notebook. I tried various things (see below) but now I ran out of ideas. I studied the sticky post in this forum about configuring graphics cards but unfortunately this gave me no new hints. My System:
Fujitsu Siemens Lifebook E Series
OpenSuse 11.3 (i586, 32Bit)
Graphics: Intel 965GM
I found lots of questions and solutions concerning the 965GM but they all are just about configuring the VGA monitor/screen in Xorg.conf.d / xrandr. I'd LOVE to do so but in my case the VGA outout isn't even detected for some reason (please see details below) Summary of my findings up to now:
[code]......
View 8 Replies
View Related
Mar 16, 2011
I have been using Fedora for a while. I decided to upgrade, and that I wanted to do a network install, but I didn't want to go for Fedora 14 when 15 comes out in a couple of months, so when I found openSUSE 11.4 was released this month, and also supported a net install, I decided to go for that. Yesterday I downloaded the net install CD. I burnt it from Windows. It burnt and installed successfully. When I got into the system this morning, it doesn't detect my DVD drive at all. There is no device for it in /dev, nor is anything shown by /usr/sbin/hwinfo --cdrom. When I insert a CD/DVD, it (the drive) detects it, but does nothing more. If I boot to Windows, it works fine. It is connected properly (I built it myself, and upgraded the drive about six weeks ago).The DVD drive is a LG GH22LS50 SATA one, connected to the SATA3 port on a Gigabyte GA-P67A-UD3 motherboard.I found this in dmesg:
Code:
[ 1.528777] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.528789] ata2.01: SATA link down (SStatus 0 SControl 300)
[code]...
View 6 Replies
View Related
Apr 20, 2011
with opensuse 11.4, my gps qstartz 1000z seem detected like a storage mass
[Code]....
View 4 Replies
View Related
Jun 5, 2011
It seems my Xonar soundcard is not detected by Suse, is there anything I can do about this?
View 9 Replies
View Related
Feb 9, 2011
a few day ago i have checked my application and make rs232 cable converter to communicated it. And not detected, why? FYI, this is my lsusb command, but in my dmesg, was not found. check this out, (usualy there is another rows, just like ".....converted to ttyUSB0....")
View 1 Replies
View Related
Apr 15, 2011
I have been using dropbox for quite some time but in the last few days I have been bumping into a problem.Recently I had a fresh install (GNOME3 and afterwards added KDE 4.6) and after installing dropbox I get the following error:
Code:
*** glibc detected *** /home/filipe/.dropbox-dist/dropbox: double free or corruption (!prev): 0xb3d44d08 ***
and dropbox terminates...
[code]....
View 8 Replies
View Related
Jan 30, 2010
REcently i hav installed opensuse 11.2. now it does nt detect the laptop keyboard and touchpad...but it detects a usb keyboard and mouse....
View 4 Replies
View Related
