I have purchase one Lenovo L420. It has Windows 7 installed. I have installed Ubuntu 10.10 also (dual boot). The wireless is not working in Ubuntu but working in Windows 7. I think that the wireless device is not detected in Ubuntu.
View 9 RepliesI have been using Ubuntu at my home laptop (Dell) have had no problem. However, recently I installed 11.04 in my office laptop - Lenovo B450, but 'm unable to connect thru wireless.
It is simply not detecting the wireless. I have a dual boot with Windows 7. Windows 7 detects wireless (surprisingly).
I have tried configuring the network connection in all possible way (manual / auto).
I have freshly installed ubuntu 9.10 and moreover i am completely a newbie to Linux. The problem now i am facing is, i am not able to configure my wireless router. I tried finding drivers for it in System->administration->hardware drivers. But it showed me none. Then i checked out one of the threads in this forum and came across the 'lspci -nn' cmd. This gave me the info abt my wireless network controller and it was : 'Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)'.
View 1 Replies View RelatedI have an nc8000 that gives a "104 unsupported wireless network device detected" error when I plug in my Intel wifi card that I acquired recently. Based on reading, this is a common HP problem due to non-native HP hardware. If I insert the Intel Pro card after the HP boot screen, 10.04 loads just fine and Ubuntu detects the card.
1) Machine Brand and Model (PC/Laptop): HP/Compaq nc8000
2) Wireless Brand, Model and Wireless Chipset: 02:04.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
3) Check interface:
lo no wireless extensions.
eth0 no wireless extensions.
irda0 no wireless extensions.
eth1 unassociated ESSIDff/any
4) Check for modules:
Code:
Module Size Used by
binfmt_misc 6587 1
snd_intel8x0 25588 2
snd_ac97_codec 100646 1 snd_intel8x0
ac97_bus 1002 1 snd_ac97_codec
fbcon 35102 71 .....
5) Network configuration
Code:
$ *-network:0
description: Wireless interface
product: PRO/Wireless 2915ABG [Calexico2] Network Connection
vendor: Intel Corporation
physical id: 4 .....
6) Scan for networks:
Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
irda0 Interface doesn't support scanning.
eth1 No scan results
7) Ubuntu Version:
Code:
Ubuntu 10.04 LTS
8 ) Kernel/architecture (including 32 vs. 64 bit):
Code: 2.6.32-21-generic i686
I've blacklisted acer-wmi as that was the fix previously, but that has no effect.
When I do an rfkill list it tells me brcmwl-0 is hard blocked, regardless of where the hard switch is. The hard switch is working fine for the bluetooth..
I installed Ubuntu 9.10 on my Lenovo T500. The wireless interface information is listed at the bottom of this message.I would like to connect to my Airport Extreme wireless router which is password protected. The bottom of the router lists three MAC addresses with different symbols next to them. I assume the symbols mean different types of connections (e.g., firewire, ethernet cable, etc).
The network icon on the upper right corner of the screen indicates that wireless is enabled. However, I don't get a wireless connection. I checked that the switch on the front of the laptop is "on" for wireless.
I just installed Netbook Remix 10.04 on my Lenovo S10 netbook and wireless is not working. I looked on google for some answers and saw that the Broadcom STA driver may be missing so when I tried to install it through Synaptic Package Manager it said that it was already installed. When I click on the wireless icon, it says under wireless that the device is not ready and I can't connect to any wireless networks, even if the SSID is not hidden. I am confused as I already have the driver and all the system updates but it still won't work.
View 2 Replies View RelatedI installed Ubuntu Netbook Edition on my Lenovo IdeaPad S10 yesterday (I was using Window XP before that) and since then I am struggling to connect to the internet. I think the wireless network device is on because Bluetooth is on and there is a reassuring blue light near the wireless symbol. But the network managers says "device not ready" and don't find any wi-fi spot.I've read posts on the subject and followed the instructions from the official documentation.
Code:
> lshw -C network
*-network
description: Ethernet interface
product: NetLink BCM5906M Fast Ethernet PCI Express
[code].....
I've instlled ubutnu 10.04 LTS on my lenovo y550 laptop. My wireless network is not working, I can connect by wire, and my wireless network is working on windows (similar like here http://ubuntu-virginia.ubuntuforums.....php?p=9613210 ). When i right-click on metwork connections icon in the upper right panel "Enable wireless" option is disabled and I can't enable it. I can't enable it with fn+F5 buttons either.
lshw -C network:
Code:
*-network DISABLED
description: Wireless interface
product: PRO/Wireless 5100 AGN [Shiloh] Network Connection
vendor: Intel Corporation
[code]....
Tried the normal fixes and installed the wrapper, etc. Wired network works fine, and I am able to access some unlocked wifi networks from neighbors, but I cannot access my own password protected network. It just keeps asking for the password and never connects. Fairly new Ubuntu guy here.
[code]....
I have a pretty new Lenovo Thinkpad L412, with Ubuntu 10.04 LTS. I can't log in to any wireless network (I have dual boot with Win 7 and it works there). The available networks shows up in the list but I can't connect them, "no network connection" it says.
View 3 Replies View Relatedwhat is really a rant disguised as a question, but does anyone have this combination working? My NetGear router shows the connection as allowed from the MAC address in the router logs, And I can see the network I want to join in the list of visible networks from the laptop, but dmesg shows Ubuntu disconnecting with
WPA-PSK [TKIP] only:
wlan0: disassociating by local choice (reason=15)
WPA-PSK [TKIP] + WPA2-PSK [AES]
wlan0: disassociating by local choice (reason=3)
I'm sure there is a simple explantion that has been sufficiently buried somewhere but after several hours of googling and searching the forums here I can't find it. Anyone want to help out an old man RTFM?
I'm getting really disappointed here lately - things are getting worse, not better. In my case in particular I have this laptop with supposedly open and supported drivers and they don't work, however, the exact same distributuon on a Dell D830 with a broadcom NIC does. under 8.10 and 9.04 this worked out the box - just logged in, gave the PSK and away we went. I can't see the attachment I just uploaded so to include the information requested in the "how to get help" post, I'll put it all here inline...
Code:
Machine Brand and Model (PC/Laptop): Lenovo R61
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
[Code]...
I am having trouble with my laptop's wireless. It doesnt work after a normal shut down. The version is 9.10 and my computer is lenovo T400.
Below are some outputs of commonds.
Code:
op@power:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
[code]....
I'm using ubuntu 10.04 enterprise cloud server for my project. I use USB NIC to interface with other 2 servers. but the system doesnot detect USB NIC. detect & configure USB NIC in the network.
View 5 Replies View RelatedA few months back, my Lenovo IdeaPad Y510 stopped connecting to my wireless network after coming out of Suspend (it had worked fine previously). Wireless networking is simply disabled, and I have to reboot in order to get it back. I tried upgrading my OS from Intrepid all the way to Lucid, but the problem persisted. I also tried changing my 00sleep_module as suggested in this thread, but to no avail.
[Code]...
An half year ago i reinstalled ubuntu 10.04, there both were no wired and no wireless connections.I have found drivers and it's everything ok with wireless, but i can't connect through LAN.
View 3 Replies View RelatedI have just installed the last FC distro, and everything works good, except the wireless network.I have a Linksys N-Ultra WirelessN USB wifi card, model WUSB600N.It uses the rt2x00 driver, concretely the rt2870 driver (at least, thats the driver included in the original device drivers CD).Right now, the problem is that i don't know how to make my Fedora 12 to enable and/or connect to internet.
dmesg | tail
usb 1-3: Manufacturer: Cisco-Linksys LLC
usb 1-3: configuration #1 chosen from 1 choice
[code]...
I recently bought and installed the Trendnet TEW423PI. Running ubuntu 10.10I downloaded ndiswrapper and it tells me:net8185 Hardware present: yesYet,cannot connect to the internet wirelessly.How do I go about setting this up?What do I need to type in the terminal
View 2 Replies View RelatedI have installed opensuse 11.4 in my lenovo ideapad G460. But, I am not being able to make the inbuilt microphone work. It does not record anything and also does not work in skype. I am not that expert with linux. I looked at different posts in this forum regarding microphone detection problem, bit could not follow. How to setting up my inbuilt microphone?
View 6 Replies View RelatedI am working on an embedded system, which is an USB MSC device that supports some vendor specific scsi commands. I am using FC10 laptop as USB host for testing, and it runs some small apps based on sg3. All has been well for ~ a week. The FC10 laptop is able to communicate with the device and retrieve data. Suddenly, starting from today, the laptop is not able to properly detect the device. When plugged-in, the MSC device is detected as input device (I thought). This is observed from "dmesg" output and changes in "/dev/input/".The device under development is running at full speed. When I connect to winXP, no problem. A windows file explorer pops up, showing the content of the drive.Also, the FC10 has no problem with other USB flash drive (high speed).
View 1 Replies View RelatedI have been having trouble getting my network card to access networks. I currently am using a wired connection. A while ago when I first installed Linux on this same computer, I got it working by installing the driver. But since I reinstalled Linux, I tried the process again with no success. Can anyone give me explicit instructions on installing the network card driver so I can use it on Linux.
View 1 Replies View RelatedI'm dual-booting Ubuntu 9.10 (upgraded from 9.04) and Windows 7 on my Dell Inspiron 1525 laptop.Ubuntu doesn't recognize any wireless network (both in 9.04 and 9.10); my Windows OS works perfectly well with wireless, as does my wired Internet connection with Ubuntu and Windows.I've had this problem on previous installations of Ubuntu (I've removed and re-installed it several times) but I can't locate the solution anywhere. I've tried numerous fixes that I've found online, but none of them have worked.System>Administration>Hardware Drivers tells me that the Broadcom STA Wireless driver is activated and currently in use
View 4 Replies View RelatedI have just upgraded from 9.10 to 10.04 and now my wireless card isn't being detected as far as I know. It was working perfectly in the previous version. At the moment I've physically put an ethernet cable straight to the router.
[code]...
im on compaq presario cq40 (amd64 turion x2) and recently install ubuntu.10.04 using wubi with dual os.. im installed wireless braodcom BCM4312 802.11b/g LP-PHY 'bcm43xx-fwcutter_006-3_amd64.deb' driver for my laptop and restart my machine.. when i go to > hardware dirver, there is no driver installed.. any suggestion? or lists any driver compatible with my laptop..
View 1 Replies View RelatedI've tried every fix i could find. I'm on a Dell Inspiron 1420 running Ubuntu 10.10 lucid lynx using a BCM4312 LP-PHYi've tried everything to get my wireless networks to connect but nothing works. I finally got my computer to recognize my wireless card but it doesn't detect or connect to networks. Before i was able to at least see the networks but not connect or stay connected once i disconnected the ethernet cable. i will post the output of ifconfig, iwconfig, iwlist scan
View 3 Replies View RelatedI've used this computer to connect to a wireless router before. I recently moved and for some reason it isn't working.I have a too long of an lspci output to type (I'm on a different computer).
View 1 Replies View RelatedI know there are a million threads about this, but my problem tends to be slightly different. I've read the sticky on here, I've googled around for a few days now, I've re-installed new drivers, tried a lot of different things. A lot of people seem to be having the issue of being able to see wireless networks, but they can't connect. I'm not that far yet.
When I click on my connections area, near the top right of the screen, then I got to edit connections, under wireless there is no wlan0 or eth1, where as if I do the same for the wired network, it lists a eth0. For some reason my wireless is on eth1, but I can only see that though lshw -C network.
Sometimes my laptops wireless "Light" is on, and sometimes its not. When its on, it means the wireless is enabled. But even when it is on, unfortunately I still have the same issue. I'm on Ubuntu 11.04 64-bit. I'm using an Acer Aspire 7552G-5430, it has the BCM43225 Wireless card.
Here is my lshw -C network
network
description: Ethernet interface
product: NetLink BCM57780 Gigabit Ethernet PCIe
vendor: Broadcom Corporation
[Code]...
Wireless not detected I'm on Ubuntu 11.04 64-bit. I am using an E machine laptop with a duel boot Win XP and Ubuntu. Both systems work great, the XP can go on line with a touch of the Fn and F2 keys but the Ubuntu mode will not.
I do not have a manual switch or button to activate the wireless. I dont want to mess up the windows XP Fn, F2 connection when I boot into XP. What should I do to connect Ubuntu to the Internet?
Are there other keys to activate wireless in Ubuntu or the wireless (addresses) routers in my area?
Is there a directory of key combinations that work with Ubuntu?
I used Ctrl, Alt and 6 rfkill list to find that.
Wireless Lan
Soft blocked: no
Hard blocked: no
I am using a Linksys Router.
I can connect Ubuntu with a wired connection but not wireless. My drivers are up to date.
I bought a new TOSHIBA C660 - i5010 today and installed.Lucid Lynx 10.04 on it, but it has not detected my wirelessg broadcom 80211 (STA) driver debp interface.
View 1 Replies View RelatedI am using a Compaq presario laptop. I installed Ubuntu 11.04 (32 bit) within windows 7.Initially my WiFi was running fine in Ubuntu without me doing anything. Now suddenly Ubuntu has stopped showing any of the WiFi networks. I have not done any changes in Ubuntu.When i booted to my Win 7, it was able to detect the network. I uninstalled and reinstalled Ubuntu, with no avail. But Ubuntu is able to detect the wired network when connected. I am at a loss.
View 9 Replies View Related