Ubuntu :: 10.04 - Vista Will Not Load On Dual Boot System
May 2, 2010
I have upgraded to ubuntu 10.04 but now can't boot into win vista, ubuntu and vista are on grub but vista will not load, I have tried sudo upgrade-grub which seemed to work but had no effect on loading windows. I did think of using win dvd to fixmbr but only as last resort, I entered the commands suggested by nitstorm and got "command not found". Followed link to source forge.net and test disk, followed the instructions to install and run test disk which repaired the boot sector in the vista partition, I can now choose to boot into win or ubuntu.
View 6 Replies
ADVERTISEMENT
May 20, 2010
I had karmic koala installed a few months back, but wasn't using it cause i didn't have time to properly configure it. Last night, i was thinking of probing around with it a little and found an update for it and went ahead and installed it. After rebooting, GRUB refused to load any of the OSes, but i was still able to access ubuntu with a reduced graphics option (safe mode?). Tried reinstalling etc etc but nothing worked. In my frustration, i whipped out my windows CD and deleted the partition for ubuntu.
Now, after the loading of bios, i get "error: no such partition. grub rescue>".Is there anyway i can get delete grub and get my vista to boot normally? or would i need to reformat everything again? maybe someone can point me in the right direction if a similar thread had been posted before.
View 2 Replies
View Related
Jan 29, 2011
How to uninstall ubuntu 10.10 from windows vista dual boot system?
View 3 Replies
View Related
Jun 15, 2011
I have just downloaded Ubuntu 11.04 and am trying to install it on a dual boot system with Windows Vista. I get as far as "Allocate drive space" but there are no partitions to choose from. I currently have Windows and Linux Mint on the hard drive and want to install Ubuntu in the same partition as Mint to overwrite it.
View 9 Replies
View Related
Apr 10, 2010
I want to set up grub for a dual boot system of xp and vista. The thing is that I have vista installed and would have to install it ance again after setting up XP in order to use the microsoft bootloader. And secondly I slowly want to get into linux...
This is how I tried it: I have four partitions on my HD and want to install the Bootloader on /dev/sda3. I started up the ubuntu live cd, mounted partition3, opened the console and tried this command line which I found in a tutorial
grub-install --root-directory=/media/hda3 --recheck /dev/hda However I get the following error message:
mkdir: cannot create directory '/media/hda3/boot': No such file or directory
View 2 Replies
View Related
Aug 27, 2010
Is there a way to pull up my windows password file while on my suse 10.3 operating system so that I can reset it? I am not able to log on to my windows partition. Either I misspelled the password when entering it or it has become corrupted.
View 4 Replies
View Related
Mar 20, 2011
I'm trying to install OpenSUSE 11.4 (64bit with the server options included) on my Mac (Core 2 Duo 2.0 Ghz with 2 GB memory). So I have sda2 the OSX, sda1 swap, sda3 is the bootcamp (windows), sda4 (ext4) and sda5(ext5). I installed rEFIt 0.14 first, then I reboot with DVD on. The installation setup resized the Windows partition from Bootcamp, and create 3 other partitions (the sda1,4 and 5). At the installation I choos MBR enable and "/" as home enable.
At the end of the installation I have the error about MBR, that can't mount, or create the mount point? I'll double check the exact message. Anyway, when I try to load OpenSUSE, is not working: can not load the system. I tried to find on the installation menu a repair (I thought that I can find an utility to fix the MBR). I don't want to choose other distribution, because I used SuSE before, and I really like it, and of course this way I can learn more about troubleshooting a Linux installation on different environment
View 9 Replies
View Related
Jun 26, 2009
I actually have a Suse running on a partitioned harddisk of 27GB but I prefer Fedore anyway. I would like to install Linus Fedora on my computer to make a dual boot system (Vista and Linus) by overwriting the previous Suse. My question is
Will I be in OS booting trouble (i.e unable to resurect the previous boot screens, windows might possibly be deleted, or not be present in the boot options) if this is done ?
Also, because I have only one disk (the first disk of Fedora 11 downloaded), will it be fine with just one first disk ? (there are several to download but I think I assume I am not going to use all of them during installation, right ?)
View 6 Replies
View Related
Mar 18, 2011
I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
View 2 Replies
View Related
Nov 2, 2010
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
View 9 Replies
View Related
Jun 30, 2010
I recently booted into linux from 9.10 and upgraded to 10.04. i was running a vista dual boot with 9.10 and everything worked fine. When linux asked where to install grub it said "if you dont know check all partitions "or something.so i did. i tried to boot back into windows and now it wont work, all i get is a blinking cursor.
View 9 Replies
View Related
Jan 18, 2010
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
View 9 Replies
View Related
May 7, 2010
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
View 1 Replies
View Related
Sep 25, 2010
I have recently installed Ubuntu 10.04 on a Compaq Presario V3000.
To prepare the install, I freed about 15 GB of space, booted from an USB. I chose "use largest continous free space" when it got to that point and then proceeded with the rest.
Now when I choose vista it will not load properly, here's what happens:
1.Windows says loading windows files.
2.After a while, I have to choose a language.
3.Windows looks for operating systems to repair.
If I choose not to, it will take me to a menu where I can choose to fix boot problems, command line, etc...
Linux is running very well, vista is the problem here, I have a recovery disk*, but I wanted to ask you guys if that is the correct move. I really need to keep windows to run some windows only apps.
*This disk was burnt on another computer, an HP from a friend who has the same vista edition. Will this work? This computer's burner is broken..
This is actually something for my gf, she has an account on my computer(only ubuntu on it) and uses it often (Mendley, Zotero, and sciency things in general). She loved it and asked me to install a dual boot with her win system. She use SPSS for whatever kind of statistical analysis it does and she likes ms office better then open office, and I would like to leave her with the choice....
View 9 Replies
View Related
Dec 26, 2010
I deleted 2 ubuntu partitions using Vista's manager, and expanded the unallocated space in to the Vista partition. when I restarted a screen came up saying error: no such partition grub rescue> Is there any way I can fix this ( by deleting grub, or something...)
View 3 Replies
View Related
Nov 2, 2010
A friend's Fujitsu Siemens Esprimo laptop was running Vista [slowly] from a 120Gig HD set up with 'him' and 'her' user-id's. I got him to try loading Ubuntu 10.10 from a LiveCD but when taking the 'install' command there was no option to install alongside Vista. I saw in the forum that you should use a Vista utility [after a de-frag] to shrink the Vista partition. We did this and freed up 40+ Gig. During the next LIveCD load we opted to use 'advanced' for partitioning and made a 35 Gig [/ Ext 4] and a 5 Gig [Swap] before completing the installation without any errors. Ubuntu now loads from the 1st grub entry but the sis graphics card limits resolution to 800 x 600 [I'll look into this further later]. Enties 5 and 6 on grub are for Vista and Vista Recovery options. Entry 5 goes through a few screens but will not load properly and loops back on itself. Entry 6 loads Vista o.k. but at a point where only one of the two users ['his'] is visible but it does run o.k.
Question 1: Is there something I can do to get the 5th grub entry working properly so that Vista loads as normal and displays the two user-id icons ? Question 2: As there seems to be a lot of issues with Ubuntu on this particular laptop would you advise running another distro like Mandriva or Mint that I've read may handle the sis graphics better ? Question 3: If we did install one of the above distros over the Ubuntu image on the 35 Gig partition would that have a good chance of creating a grub where Vista and Mandriva [or Mint] ran happily together.
View 9 Replies
View Related
Jan 13, 2010
I'm trying to get a dual boot set up for vista and 9.10
I already have 3 logical partitions
Code:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x48000000
[Code]....
View 1 Replies
View Related
Jan 26, 2010
If I were to install windows vista shrink the partition to fit only the OS and dual boot Ubuntu over it would I be able to use windows programs on the Ubuntu install.
In a sense I am wondering if I can use Ubuntu as my primary OS and use my Windows Utilities through Ubuntu on the Ubuntu partition?
If not would it be possible to install them on the windows partition and launch them through Ubuntu?
View 3 Replies
View Related
Jul 25, 2010
I'm using Lucid and trying to dual-boot into Vista.
All I see when I select Vista in the GRUB loader is in the .png image I have attached to this post.
Very confusing....I can get to Vista by inserting the install disk, but then it overwrites (I believe) the GRUB loader.
Also:
Is there any way to reinstall GRUB from the Lucid installation disk without installing another Lucid OS??
View 1 Replies
View Related
Jan 3, 2010
I recently recieved Ubuntu 9.04 Desktop Edition CD-ROM through snail-mail after requesting a copy online and I want to install it on my laptop, although I wish to keep Vista which is on it now.
My laptop has a 250GB hard drive. Although when in Vista this is represented as two separate drives each of 110GB, (C or ACER and (D or DATA.
Using the CD, I start the installation and everything is straightforward and self explanatory, until I get stuck at step 4...
Where I am told by the ubuntu installer: "This computer has several operating systems on it." (I'm confused now, I thought it had one, Vista.)
Beneath I am shown a bar representing my disk space which is divided between...
I am given the option to use the entire disk: 'SCSI1 (0,0,0)(sda) - 250.1GB ATA WDC WD2500BEVT - 2', (and from the mention of 250BG in the name I'm assuming this is one disk and not the two separate drives named C: & D: in Vista.) ...along with a warning - "This will delete Windows Vista (loader), Windows Vista (loader), Microsoft Windows XP Embedded and install Ubuntu 9.04". (The aforementioned "several operating systems" obviously.)
But I wish to keep Vista, so I select the option to "specify partitions manually" and am brought to a screen named 'Prepare Partitions', where there is a table somewhat like this:
I am then given the option for "New partition table", and if I select any of the bottom four devices I can 'edit partition' or 'delete partition'.
Selecting the device /dev/sda3 (because it is the one that I'm guessing has no operating system data on it, judging by the previous screen) and choosing 'edit partition', allows me the following options...to create a new partition size, to select what I want to use the partition as. (There are also two options for formating a partition, which is a checkbox, and Mount point. These are both greyed out.)
When I look at the 'Use as:' option, within 'edit partition', the drop down box allows me to use the partition in the following ways:
- do not use the partition
- swap area
- NTFS
- FAT 32 file system
- FAT16 file system
- XFS journaling file system
- ReiserFS journaling file system
- Ext2 file system
- Ext4 journaling file system
- Ext3 journaling file system
View 3 Replies
View Related
Oct 8, 2010
Before today, a 4GB RAM 64 bit laptop with single 320GB HDD, Vista x64 primary NTFS partition of 60GB for C Drive, then Ubuntu 9.10 64bit on primary ext3 partition of 25GB, no swap partition but swap file I added, then what was an extended NTFS partition that contained the Vista D drive with all my app data, documents and media on 4 or 5 logical partitions. I boot into GRUB and choose Vista or U9.10, U9.10 by default, and access the NTFS D:drive to share media, documents,config profiles for Firefox and ThunderBird, etc.
The Ubuntu install came from my first try at 8.04, and has been upgraded to 9.10, so it's okay but not great. For example, suspend and hibernate are screwed up because there's no swap partition, I believe, and I would like a more optimal fresh installation of U10.04 without again upgrading it over top of 9.10/9.04/8.10/8.04... Today, I repartitioned the D Drive Data extended and logical partitions into one smaller 100GB NTFS primary partition, so its Vista C Drive, U9.10, then D Drive and then unallocated space. I attach an image of GParted to show it. The partitions aren't optimal but it works for now.
Install U10.04 or U10.10 clean into a new partition on the unallocated space. I thought if I used an Extended partition
can only have one?) with Logical partitions for the OS, my personal data, a swap partition, etc. that I could get a fresh install of the new Ubuntu and still have a working dual boot until I was happy and then either do a tripleboot and keep Vista and the 2 linux, wipe out the U9.10 partition and merge it into the Vista D Drive for data and shared data with the remaining Ubuntu 10.x.
Q1 - Should I create a ext4 extended partition in unallocated space and set up logical partitions for /root, /home, /swap and any other recommended?
Q2- Will the U10.x installer do that for me?
Q3 - Can I keep my working GRUB 1.5 with working Vista and Ubuntu 9.10, just add in the new U10.10 install until I get it set up right, and then move the GRUB or whatever boot loader to the new U10.10 intall as default?
View 5 Replies
View Related
Dec 7, 2010
I have an identical problem on two separate computers. The first is an acer aspire 5735z set up to dual-boot to either ubuntu 10.10 or windows vista. The second is an asus eee-pc 900hd set up to dual-boot to either ubuntu 10.10 or windows xp. This problem has consistently happened with both computers since original setup of dual-boot. Neither computer had this problem when windows was the only OS. This problem occurs at approximately 50% of boot attempts. Here's my description of the problem: when booting (turning on or restarting) the HDD and fan spin for a few seconds, the computer makes a 'click' noise, then the computer turns off. There is a blank screen the whole time. Once off, the computer will try again and again, in a loop, but never successfully boot.
My temporary solution: i unplug the ac, take out the battery and hold down the power button for one or two minutes. the computer will turn on and display my dual-boot menu. i've read about similar problems, and some were resolved by 'flashing the bios', which I gather is some sort of bios update. I've never done this before, but it sounds like something that could easily mess up my computers in a bad way.
View 3 Replies
View Related
Feb 15, 2010
Here the other day, I decided to try out 10.04 Alpha. But after I had done it, I weren't able to boot Vista anymore. When I choose it in the grub boot loader, it changes to only showing the word "GRUB", and nothing more happens. As a desperate attempt to fix it, and because I weren't happy using the Alpha, I then decided to switch back to 9.10, but the problem with booting Vista persists.
View 9 Replies
View Related
Mar 21, 2010
upgraded from 9.10 to 10.04 beta today.Ubuntu boots but not Vista boot info script info for my system as follows...Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb
[code]...
View 2 Replies
View Related
May 2, 2010
I just successfully upgraded to 10.04 on my Ubuntu-Vista dual boot SONY VAIO. I do have a separate Ubuntu partition for /home. I have decided I want to abandon Vista entirely and do a fresh install of 10.04 so I will be able to use GRUB2. How do I proceed, short of totally wiping out the drive?
View 1 Replies
View Related
Jun 25, 2010
Today I've decided that I would like to remove my useless, freezing windows install from my Ubuntu laptop and only use Ubuntu... booting windows XP from a virtual box whenever I need to use a Windows application with poor Wine support. Any safe way I can go about doing that? I tried googling this, but all I found was the opposite, remove ubuntu from windows... which is quite sad. Anyway, windows is using up a ton of space that it doesn't need to. It takes me 5 minutes to even get it booted and after using Ubuntu, I have no patience left for the program. What should I do?
View 8 Replies
View Related
Dec 5, 2010
I'm new to the world of Ubuntu 10.10. My PC had windows Vista running on an 80GB HDD, and on Friday 03/12/10 I decided to install Ubuntu 10.10 on a second 160GB HDD. Wrongly I assumed I could simply have 2 HDD's in my PC and it would magically allow me to chose between Windows Vista and Ubuntu 10.10. Well that was 50 hours ago and I still can't get it to work. As you can see I have the results of my boot_info_script055.sh below.
PHP Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
Grub 2 isnstalled in the MBR of /dev/sda and looks on the same drive in partition # 1 for (,msdos1)/boot/grub.
=> Windows is installed in the MBR of /dev/sdbsda1:
File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub .....
View 9 Replies
View Related
Jan 6, 2011
Trying to boot alongside windows (just in case!). I downloaded the ISO from Ubuntu website before I saw the windows installer. After which I downloaded the windows installer! Now each time I try to load either one it tries to download the iso again. I'm only on a PAYG connection ATM so downloading again is not really viable this month!
I've tried to make a new partition using:
my computer/ management/ shrink
But the size that windows allows is 140MB which obviously is not enough, I tried burning the ISO to a CDROM and booting this way but windows did not bother booting the disc. I entered F2 BIOS and changed the boot order to my CDRW drive 1st but still UBUNTU did not boot. Windows recovery manager or something booted.
View 2 Replies
View Related
Mar 7, 2011
I 'm currently using grub to dual boot Windows Vista and Ubuntu 10.10.These are some of my partitions:
- one NTFS partition for Vista
- one NTFS partition for my Vista Data (shared with Ubuntu)
- one ext3 partition for Ubuntu (mounted at /)
- one very large ext3 partition for my Ubuntu home folder (mounted at /home)
I would now like to add Windows XP to this setup, but I am not sure where to start.I know I need to somehow shrink the large ext3 partition so I have an extra partition for XP, which should be NTFS.Then I assume I need to install XP on this partition, and somehow make XP appear in grub.how to do these things. Can anyone help? Please keep the instructions very basic, do not assume that I know anything.
View 2 Replies
View Related
Mar 8, 2011
Firstlyi want to specify that i read many threads and guides before posting this, tried to follow some advice and solutions but nothing worked (but I am a beginner user, and maybe i did something wrong!)My laptop is a Lenovo SL410 (i bought it in China) which came with pre-installed Windows Vista.I had many trouble with resizing the partition in order to make room for Ubuntu but i finally managed. I successfully installed Ubuntu 10.04 and everything works fine.My problem is that Grub shows"Windows Recovery Environment (loader) (on /dev/sda1)" instead of normal Windows Vista (which is on /dev/sda2)If i choose Windows Recovery Env. i can load Vista but is not stable, keeps crashing, or giving me warning about low memory
View 9 Replies
View Related
