I want to reinstall lucid for various reasons, so I downloaded the file, burnt it to cd and then booted with the cd in. An ubuntu screen started then went to a black screen with the message:(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/output errorCan not mount /dev/loop0(1cdrom/casper/filesystem.squashfs) on //filesystem.squashfsthen no further progress.
View 5 RepliesAfter troubleshooting the lockup problem on my installation of Lucid, I want to wipe the thing and reinstall. I have an integrated Broadcom wireless chipset that I want to integrate the firmware into the new Lucid install disc, along with Nvidia's 180.06 drivers for my GeForce4 440 Go (yes, it's an old machine). I need to build this from XP though, since my current Lucid install is to the point of unusable.
Is there any good way to do that? With XP builds you can use nLite to slipstream just about anything into a clean XP install, including all available hotfixes, extra drivers and a few applications. Is there a similar program for building Ubuntu installs that can do that as well? Also, if I download a new ISO of Lucid to build from, will it have all the current updates integrated, or it be up to me to do it? Edit: just realized I posted this under the wrong topic.
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
View 1 Replies View RelatedI've recently upgrade ubuntu 9.10 to 10.04 LTS using my system update and after it had completed installing the packages. I shut down the computer.Then after I get home, I open my computer I have found out that the system is unable to mount my filesystem. I went to manual recovery, typing in fsck -y /dev/sda1 then after it runs, it said the system is clean. So then I type control d to reboot but then it said that the system I not ready or present and I continue to wait. It seemed that there's a major issue mounting partition in my computer, I'm not sure if NTFS has any involvement.
View 9 Replies View RelatedI have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
I have installed the newer kernel 2.6.35.4 and everything seems fine. To compile it, I followed this tut, [URL]. The problem I have is everytime I try to install anything, I get an error "bcmwl-kernel-source failed to install or upgrade". The installation completes for the default 2.6.32.24 generic kernel but fails for this newer kernel.
Any software I try to install now fails for the .35 with the same error. I have attached 3 screenshots showing the error message in more details hopefully. I had installed the .34 kernel and had the exact problem (screenshot.jpg). Error message is shown very clearly in third attachment, sorry I couldn't manage to copy the error and paste it.
I have been running ONLY linux (ubuntu) on my computer for years now. However, a friend sucked me back into the world of MMO's (angry fist @ RIFT). So, I decided to pick up a new disc, slap windows 7 on it and now want to dual boot.Basically I had to do some disc juggling to get windows to play nice. So my windows drive is now first, then my Ubuntu drive second.Its been a while so I'm wondering how involved / what would be the steps to get grub2 to chainload into windows7 (in my head I want to say I'm going to boot into the live cd, mount the windows disc and reinstall the loader to the windows drive since its the first disc in the chain?)
View 1 Replies View RelatedAfter a powerdown during my upgrade of Ubuntu 9.10 to Ubuntu 10.04 that rendered my operating system useless I can get to my /home folder. The /home folder is locked and can not be copied or read. This means I can't reinstall my stuff and keep my files. The rest of my data (except for the /root folder) seams to be unlocked. How can I get to my /home folder? Does anyone know how to unlock it?
View 2 Replies View RelatedI'm a complete novice who installed ubuntu 10.10 this morning, which seemed like it worked great until I noticed that I had to connect to the wireless network manually each time I re-started etc. I did some research into this and found that if you disable the network manager via the terminal section by replacing certain lines with 'deny' instead of accept or something. I did this however the nm was unable to connect anymore! I've been tearing my hair out searching the net, and this forum for a solution but to no avail. Ive since removed network manager while trying one (of many) ways I found online, so need to install it once more. I even tried to install the whole os again from the disc that I did so with initially, but it doesn't work either!Ill be more than happy to connect every time I turn on if it means I can access the net once more!
View 1 Replies View RelatedIs it possible/easy to create my own install disc based on the install that I have now? I just got finished setting up ubuntu on a new computer and I want to make an install disc that has everything that I have set up ALREADY set up right after installation.
View 2 Replies View RelatedI DLed 10.10 iso and burned it to cd. When I try to boot with cd, it starts up fine, I get the Ubuntu logo with rolling dots, but after a few mins it freezes (with logo still on screen). I have been running Ubuntu on this comp for years
View 9 Replies View RelatedI am trying to install debian on a compaq presario 6000. When I try to boot off of the first dvd it just won't do anyting most of the time; one flat line keeps blinking. The first time that I booted it, there was that line that starts with isolinux, but that was only there the first time. now nothing shows up.That first time, I got several error messages: EDD: error 8000 reading sector 1360652 and the same thing 5 times over with different numbers at the end. Do these mean that the disc is corrupt in some way, or that the dvd reader is broken or something else?
View 14 Replies View RelatedI've never tried installing any other operating system on my desktop so I'm not sure if it's a 9.10 bug (probably not), but whenever I choose any of the options after the ubuntu cd has been loaded at startup it goes to a black screen with the underscore at the top, and promptly reboots. At this point in time I can just boot back into windows or get to the same selection screen off of the cd.I've tried burning 3 seperate cd's and at the moment and trying to boot them on my laptop (but not working... hrm). I'm thinking about redownloading the iso in a couple minutes.
View 2 Replies View RelatedI have Ubuntu 11.04 installed and running on my laptop and was wondering if there was any way to create an install disc/usb or some other way to install Ubuntu in its current state (including all apps, updates, settings etc.) onto my desktop.
View 6 Replies View RelatedI386 install dvd, gets to the point where it needs to resolve packages and then anaconda crashes. http://jaojbre.users.sbb.rs/anacdump.txt contains detailed log file. Any idea?
View 1 Replies View RelatedIs this irrelevant if you are using the kde install disc? I want to use a encrypted filesystem. I would think since I am using kde that I would have a graphical interface.
View 10 Replies View RelatedI am new to Linux and I'm trying to install OpenSuse on my machine:
AMD Athlon 64 3200+ / 2.0 GHz
ATI Radeon Xpress 200
512.0 MB DDR SDRAM
ATI Radeon Xpress 200 Shared video memory (UMA)
DVD-RW 16X TSSTcorp CD/DVDW TS-H552B drive
Western Digital WD3200AAJB 320GB Hard Drive
I downloaded the ISO for version 11.4-i586 DVD size from DirectLink on opensuse.org. I checked the Windows MD5CHECKSUM and verifyied it. The installation goes fine until it begins installing packages when it prompts:
"Insert Disc 1"
Which I believe is the Disc that I burned already with the ISO file and is in the DVD-ROM drive that it's asking for. This happens for several files, and prompt me to either
retry/skip/abort/cancel
If I click Retry I get "media1.media not found" or a similar message. If I click Abort/Skip/Cancel the installation stops and takes me to a text version of the installation which then stops and says that it can not find the Installation Package either.
I have looked for reasons behind this but all I could find was possibly Mounting the DVD-ROM but the installatin runs fine until it begins looking for specific files and says it can't find the files on the Disc, even though it's in the DVD drive.
I've just gotten a gateway netbook I'd love to throw a copy of ubuntu on. However, before I install I'd like to create a backup factory install disc. The problem is I don't have a DVD drive in my netbook.Is there a DVD writer program for Windows or something similar that would simulate the presence of a DVD drive and allow a backup DVD to be written to it?
View 2 Replies View RelatedI have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies View RelatedI would like to combine my Linux partition (/sda3) and /sad1 to give me more disc space. I would also like to combine the two unallocated partitions to install a Windows 7 dual-boot with Ubuntu. How would I do that without totally raping my current Ubuntu install?
View 1 Replies View RelatedI've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
this blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
When you install Ubuntu, you will typically install a complete desktop environment. It is also possible to install a minimal set of software (just enough to boot your machine) and then manually select the precise software applications to install. Such a "custom" install is usually favoured by server administrators, who prefer to keep only the software they absolutely need on the server.
I have never personally noticed any sections in the install to allow you to do a custom minimal install, is this possible in Lucid?If so how, or do I need to download just a mini install iso?
I upgraded to Lucid from Jaunty on a 3 1/2 year old toshiba Satellite by doing a clean install. There is no sound anywhere. I had no sound problems with Jaunty. I ran the alsa upgrade script from this site:
[URL]
There was no change I could see after this was done.
In sound preferences>
hardware--there are no entries;
input--the input volume is shaded
output--the entry is Dummy Output stereo
The alsamixer shows only the pcm control, there are no capture controls. In select sound card (F6) I selected HDA ATI SB (default was only other choice). I have Linux Mint 9 (based on Lucid) on a Dell mini-9 and the sound works.
I'm trying to install Lucid to an older PC, but it constantly freezes during the setup. Most of the time I can't even select whether I want to install or to try the OS, but sometimes I get past that. Once I got to the point where the installation was copying the files to the hard drive, but it froze once again at 5%. The PC's config is: 1,8 GHz AMD processor, 768 MB DDR1 memory, 200 GB HDD, ATI 9200 VGA and a DVD drive. According to the minimum reqs for lucid this should be more than enough, yet Lucid froze once while in Live CD mode. Should I try an older ubuntu version? Or could this be something more serious, ie hardware issue in which case you guys can't help.
View 6 Replies View RelatedI have been using this release sense its release. Suspend and resume have never worked. It is now taking it's toll on this laptop. The current kernel is 2.6.32-25-generic. I just want to know if their was ever a patch or update created for this problem.
View 3 Replies View RelatedI'm having some problems installing Ubuntu 10.04 64 bit on my laptop - I tried first using the CD but selecting 'Install Ubuntu' from the menu did nothing at all so I'm using wubi instead. The initial wubi install was fine but attempting to boot into Ubuntu initial setup results in lock up. Booting without the graphic workaround option gets as far as: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xC0000000.However with the workaround it gets further and the final log output is:set up 63M of stolen space.
View 2 Replies View RelatedDecided to try out Ubuntu instead of automatically getting the next Windows OS.
I have a Dell Dimension E310 with on board video card (will be relevant soon, I think).
After trying making my own CD and not being able to at least run the LiveCD (thought it was my fault even thought the MD5 #'s matched correctly), I went to Shipit and got a CD delivered of Ubuntu 10.04 (Lucid). When I put the CD into my computer while running windows, the CD is not recognized, which seems strange to me. When I put the same CD into my work laptop (note that both computers are running XP), I can see the contents of the CD. Decide that it might not be an issue and restart the computer in the hope of booting from the CD. CD is never recognized and looking at the bootmenu, it has USB-cdRom at the top of the list.
More information: CPU is an Intel Pentium 4, 3.2Ghz. I don't believe it is a 64bit computer but I can't verify that. I mention this because I believe the CD I got is the 32bit version and that it should be sufficient but I figured I'd throw it out there in case someone else knew something.
I want to install Ubuntu Server distro. First i downloaded ubuntu-10.04.1-server-amd64.iso and "burned" it to my usb-pen using UltraIso software for windows. That booted from the usb, but just after punshing in the language etc it complains that it cant find the cdrom or something like that. then i try the [url], but that wont boot at all with this same iso mentioned above. and burn it to a darn CD. it boots, but somewhere during the process it stops and asks for the same cd that is actually in the drive already. there is a thread about this here: [url] I then wanted to find an easy iso that i could throw on my usb-pen and install the whole thing through ftp like i did in the old days with floppies. but man, i got lost in the documentation with no clear path on how to do it.
View 1 Replies View RelatedI'd like to install Ubuntu 10.04 but unfortunately I have and old Samsung low res (800x600) monitor and when I boot with the live Lucid USB pendrive the screen goes crazy and remains there forever.
View 6 Replies View Related