my HUAWEI E160E Virgin Mobile no longer works after upgrade to Lucid it is detected but the connection no longer works. I tried deleting the connection and trying again but the modem is not detected in network-manager. The modem was working when i was using Karmic and still works on my UNR Karmic Netbook. I have tried various methods but I have not been able to get it to work.
View 1 RepliesI am attempting to connect to Virgin Broadband (Australia) pre-paid using a Huawei E160e modem in Ubuntu 9.10 UNR. I have setup the connection as per [URL].. including disabling CHAP and changing the APN as required in the thread. when I try to connect using the network manager, it disconnects straight away with the message "GSM Network disconnected". When examining the logs /var/log/daemon.log, I get the following information:
Code:
Jan 23 21:26:09 janet-laptop NetworkManager: <info> Activation (ttyUSB0) starting connection 'Virgin Mobile'
Jan 23 21:26:09 janet-laptop NetworkManager: <info> (ttyUSB0): device state change: 3 -> 4 (reason 0)
Jan 23 21:26:09 janet-laptop NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 23 21:26:09 janet-laptop NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
[Code]....
When I run update manager, it gives me an error message saying:
Code:
This can be caused by:
* A previous update which didn't complete
* Problems with some of the installed software
* Unofficial software packages not provided by Ubuntu
* Normal changes of a pre-release version of Ubuntu
if I click partial upgrade, it looks like it did during the upgrade, then says:
Code:
There are no upgrades available for your system. The upgrade will now be canceled.
if I click close from the first "not all updates can be installed" dialog, it says:
Code:
It is impossible to install or remove any software. Please use the package manager "Synaptic" or run "sudo apt-get install -f" in a terminal to fix this issue at first.
running the suggested line gives the following output:
Code:
In Synaptic, fixing broken packages does nothing. Mark All Updates > Apply seems to work, but I'd still like to figure out why Update Manager does not?
Since I upgraded to 10.04 and ran Computer Janitor, the Xiphos Bible Guide no longer works. The splash screen comes up for a second and then disappears. I've tried removing and re-installing the program to no avail.
View 3 Replies View RelatedI seem to have a problem with my mobile broadband connection. I have a huaweii e166 usb hsdpa modem. It is veeerrryy slow. It used to work fine in karmic a few days ago, used to get 800kbps (from whatismy.com), now in Lucid the speed test does not even finish sometimes, but if I open the system monitor it shows about 1kbps. Sometimes is gets slightly faster and I can browser a bit more, but then the speed goes down again, to barely useable. I have also setup the modem in xp and whatismy.com speedtest shows 900+kbps constantly. I did a clean install of lucid on my compaq presario cq60 laptop. I have disabled ipv6 and installed the usb-modeswitch_1.1.2-2_i386.deb and usb-modeswitch-data_20100127-1_all.beb but it is still very slow.
[Code]...
I installed Lucid several days ago, and have just noticed that SCIM no longer works. I need it for Japanese input, but cannot turn on Anthy. The manual is either nonexistent or extremely terse with a lot of presupposed knowledge.I've installed German, Russian and Spanish language support, along with CJK. I can't even get the SCIM tool to pop up now---except ONCE!Simply reinstalling using Synaptic overlays the existing problem(s), and does not resolve any issues.SCIM may be conflicting with the desktop Switcher applet? Actually, SCIM seems to be conflicting with other Gnome desktop shortcuts, as well
View 1 Replies View RelatedI was wondering if there was Linux compatible software for Virgin Mobile's USB modem. Officially it's only compatible with Xp, Vista, and Mac OS X.
View 9 Replies View RelatedI can't get my sister new computer (she needs for work) to work with her mobile broadband dongle (details at bottom of post). The light on the dongle flashes green when plugged in, it recognises the connection in mobile broadband network connections, but won't connect (i checked connect automatically, it doesn't come up as an option in the top panel network thingy either.
Googled a solution that works for other people, not for me. The solution is for ubuntu 8.[URL].. I've been using Ubuntu for a year or so but not that experienced in fixing problems. The wifi and screen brightness settings are't working either but that isn't really a problem, assume it will get fixed in an update soon.
Samsung N210 Ubuntu 10.04 Beta 2 (updated from 9.10, dongle didn't work in 9.10 either) Virgin Media Mobile Broadband Dongle. TCT Mobile Ltd, One Touch X200S
I recently upgraded from 9.04 to 9.10 and the sound on my machine no longer works. I was previously using the OSS for sound. I'd like the sound solution that requires the minimal effort and I don't necessarily need to run OSS again. Ubuntu is installed on a Dell Optiplex 960.
Code:
aplay -l
results in:
Code:
aplay: device_list:223: no soundcards found...
[Code].....
I have just upgraded to 11.04 from 10.10 and my wireless no longer works, the laptop is a dell inspirion 1501.
View 2 Replies View RelatedI had a working lirc using my hauppage card. After upgrade to Lucid, it no longer works. I don't see errors, but it appears to me is is not detecting the Hauppage card:
Code:
mythuser@PVR1:~$ dmesg | grep lirc
[ 19.761015] lirc_dev: IR Remote Control driver registered, major 61
[ 19.928886] lirc_i2c: chip 0x0 found @ 0x18 (Leadtek IR)
[ 19.928890] lirc_dev: lirc_register_driver: sample_rate: 10
[61920.300286] [<e086d654>] lirc_unregister_driver+0x44/0x160 [lirc_dev]
[61920.300289] [<e089a02b>] ir_remove+0x1b/0x30 [lirc_i2c]
[61920.300318] [<e089abc2>] lirc_i2c_exit+0x12/0x14 [lirc_i2c]
Before I upgraded to Karmic, I had Japanese text input set up on my system, but since the upgrade it no longer works. I can still read Japanese text, and when I press Ctrl+SPACE I still get the ANTHY box in the bottom right-hand corner, but Japanese is no longer on the list of supported languages. how to get Japanese back?
View 1 Replies View RelatedI recently upgraded my Zepto laptop to Natty (11.04), and unfortunately the wifi no longer worked. I have a WPA net, and the combination with a Ralink chip seems unfortunate - judging from the number of internet posts.After browsing loads of threads on the 'net I think I have found a solution for 11.04 - it will work out of the box in 11.10 !
1) Add "blacklist rt2800pci" to /etc/modprobe.d/blacklist.conf
I think this makes the wifi stuff work as I can then do "iwlist wlan0 scan" and get reasonable output. But there is no integration with the Network Manager. So I have also done this (again, with inspiration from a few threads):
2) Edit /etc/NetworkManager/NetworkManager.conf - change the "managed=false" under "[ifupdown]" to "managed=true".
You may have to do a "service network-manager restart", restart or similar to get it going.It also seems I can suspend and get a wifi net connection upon wakeup.
I was successfully using samba + fedora directory server in fedora 10 as a primary domain controller for my home network (achieved mostly by following barry905's instructions here: [url].
After upgrading to fedora 11, some of the pdc functionality no longer worked.
For example, when i ran 'pdbedit -Lv', i got:
Code:
I was able to fix this by adding to the [global] section in /etc/samba/smb.conf:
Code:
I also found that i could no longer join an xp computer to the domain. i discovered that for some reason, the samba administrator password had been cleared. after running:
Code:
That was fixed.
The last problem, which i have still not fixed, is that roaming profiles no longer work. when i try to do a domain login as user 'htpc' from an xp machine, i get the following message in xp:
Code:
Here's an excerpt of my /etc/samba/smb.conf:
Code:
I am new to Linux. I have recently installed the Ubuntu 11.4 LTS Distro that comes with the Haynes Linux Manual (which I heartily recommend to new users). For the Internet I have a Huawei E1550 dongle on the 3 network in the UK which I'm currently using with Windows XP on my desktop to post this thread. After some initial fumbling, I'm unable to use the dongle with Ubuntu.
View 8 Replies View RelatedI got a Huawei E 173 mobile internet USB. But i cannot get it to work under linux, only under windows(it has a windows installer on it, in order to work).
View 2 Replies View Relatedi am using ubuntu 10.04. my huawei e1550 usb mobile broadband modem was detected out of the box and was working fine . But after unlocking it with a software,the modem is detected and when i connect ,it immediately disconnects. unlocking was some 'Firmware upgrade' . I tried other distros like pclinuxOs but the same problem prevails. and it is working in windows.
View 5 Replies View RelatedI just purchased a mobile broadband connection from 3 in Denmark. I spent three hours following guides about usb-modeswitch and such. I just couldn't get it to work. Now, finally, I've come THIS far, but yet no internet.
Code:
daniel@daniel-laptop:~$ sudo usb_modeswitch
Looking for target devices ... No devices in target mode or class found Looking for default devices ... Found default devices (1) Accessing device 004 on bus 001 ... Using endpoints 0x0f (out) and 0x8f (in)
Inquiring device details; driver will be detached ... Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
[Code].....
Need a bit of help with this have got the broadband side working lovely on Mandriva linux but it should show as a removable drive in fact in windows it shows as two on linux none its as if there not there.Can anyone point me in rite direction to sort this.it sort of see but it just is not available normally removable drives just come up
View 1 Replies View RelatedI'm new here. This is my first post. Something tells me my problem will be met with great sighs and shrugs of shoulders. I think you may have heard this problem just a few thousand times. couple of days ago i took the plunge and installed Ubuntu 9.10. I already run XP Pro. I have the system set for dual booting until i get to grips with Linux and have all that i use daily from software to hardware comprehesively installed and running. then i have this ideal romantic dream of dumping my microsoft heartache, and living a happy life with the new love in town (an OS that works!)
Vodafone (Huawei K3520) mobile broadband dongle. Yes i know its a touchy subject but i am going cross-eyed reading info on various forums from this one to the betavine forums and a detour through vodafone themselves. I just can't find clear concise info on how to get this dongle up and running with Ubuntu. My laptop is Acer Aspire 5633 WLMi. I would really really appreciate your help on this subject i need to get online with this dongle and Ubuntu.
I just installed 10.10 on a my new Aspire One Acer netbook and I got a mobile broadband USB stick from Wind mobile.
The stick is activated because it works on my 20 GB Windoze 7 O.S. but it doesn't work at all on my 140 GB Ubuntu O.S. Both systems are on the same machine so I know it's not a hardware problem either.
Here's what happens: I log on to Ubuntu, plug in the stick and I select the "New mobile broadband GSM connection" in the network connections menu.
From there I selected my country (Canada) and my mobile provider (Wind Mobile) than I selected my plan (Mobile Broadband) and my APN (broadband.windmobile.ca).
Then the stick blinks slowly and the network icon looks forever for a connection but no matter how long I wait no connection ever establishes. My roomate has it working on his HP laptop Ubuntu but no luck on mine. The stick just keeps blinking, a steady light indicates a connection.
My connection is much slower on linux than windows (I'm dualbooting so its easy to test). On speedtest.net I get 0.30Mb/s at most on linux but about 2Mb/s on windows.Torrents does not seem to be affected thou. I've got speeds up to about 150kB/s on Fedora.I'm running a fresh install of Fedora 12 64 bit.
View 4 Replies View RelatedDoes anyone know how to connect to Huawei E122 Mobile dongle? I used to connect to E169 usb stick via umtston.
View 3 Replies View RelatedI have just installed ubuntu 10.10 sucessfully, but it doesn't recognize my mobile huawei alisa internet dongle.
View 1 Replies View RelatedI am trying to use the HUAWEI E1756C USB stick to connect to the internet. Installing usb_modeswitch and usb_modeswitch-data allowed networkmanager to "recognize" the stick and set up a mobile broadband connection.
The result is that NM succeeded in connecting (one of every five attempts) but firefox does not surf, nor emails can be downloaded etc. Just like if not being connected. The USB modem shows the steady blue LED as connected.
A NM issue? I have tried disabling NM control and tried with PPP clients like NMTSMON, wvdial and even Sakis3g. All with the same results. They seem to connect and show flux up and downloaded but no surfing.
resolf.conf shows is pretty much empty and no DNS there.
The working settings in Window$ are:
Same settings with Sakis3G, or NMTSMON or NM result in connection with no action from applications that use the internet.
I have had a similar issue with WLAN each time I change to a different network. I solve that by forcing to update the DHCP. I mean using -su dhcpd wlan0
But attempts like dhcpcd ttyUSB0 or dhcpcd ttyS0 get the same result. So no idea if this is an DHCP, or DNS or another issue.
My box is an ASUS EEEPC 2005H netbook with OpenSuSE 11.2 and KDE
I have a Huawei E122 Mobile Broadband HSPA USB Stick on three ireland. i can't get it to connect. but i think the problem might be, when i stick it in nothing happens. it doesn't show up under lsusb. i don't think it "mounts"
View 2 Replies View RelatedI have opensuse 11.1 Gnome on Lenovo S10e. I'm wanting to establish a mobile internet connection. I have tried so far...*UMTSMON but when I click on it nothing happens. I have reinstalled the program several times to no avail. *WINE to run the Optus program, however the program doesn't find the HUAWEI USB stick & *Via a Bluetooth connection (use mobile phone as a modem) didn't work either Anyhow, I have tried these and some other ways to get mobile to no avail.
Also, have gone to network connections-mobile broadband-add-configure it- but what am I forgetting to do? Need a path I can take to get mobile internet working. (I even have a direct SIM card slot in this laptop
I have a little bit of a prediciment with my Mobile Broadband dongle, even though I know I'm in a 3G area (Dongle Supports 3G connection) my internet still loads at the normal GPRS speeds max of 5kb/s. Is there anyway to change the speed of it or do I have to keep with GPRS at the moment?
View 2 Replies View RelatedI have two laptops, all using Ubuntu Lucid. Just now I tried using a USB Modem Huawei E220 in both but was not detected as a modem. Why? Would have Lucid Ubuntu does not support Huawei E220? If yes, why? Whereas the older Sierra 881 could be used. For the record, before I use Ubuntu Karmic on both the laptop and all could use. Huawei E220
View 1 Replies View RelatedI've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
[Code].....