OpenSUSE Network :: Mobile Internet Connection - Program Doesn't Find The HUAWEI USB Stick
Aug 11, 2010
I have opensuse 11.1 Gnome on Lenovo S10e. I'm wanting to establish a mobile internet connection. I have tried so far...*UMTSMON but when I click on it nothing happens. I have reinstalled the program several times to no avail. *WINE to run the Optus program, however the program doesn't find the HUAWEI USB stick & *Via a Bluetooth connection (use mobile phone as a modem) didn't work either Anyhow, I have tried these and some other ways to get mobile to no avail.
Also, have gone to network connections-mobile broadband-add-configure it- but what am I forgetting to do? Need a path I can take to get mobile internet working. (I even have a direct SIM card slot in this laptop
View 5 Replies
ADVERTISEMENT
Feb 7, 2011
I have a Huawei E122 Mobile Broadband HSPA USB Stick on three ireland. i can't get it to connect. but i think the problem might be, when i stick it in nothing happens. it doesn't show up under lsusb. i don't think it "mounts"
View 2 Replies
View Related
Apr 2, 2011
I have just installed ubuntu 10.10 sucessfully, but it doesn't recognize my mobile huawei alisa internet dongle.
View 1 Replies
View Related
Sep 11, 2010
I've just installed openSuse 11.3. How can i connect to the internet. The Mobile Broadband tab on YaST is not clickable. On Linux Mint that tab is available.
View 2 Replies
View Related
Sep 3, 2010
Although my Huawei e200 usb stick is working well under ubuntu, its not working in openSUSE. I think the udev rule provided by the vendor is suited for a debian system and not for openSUSE. When i see the dmesg output, it adds driver for ttyUSB0 and as soon as it adds it also removes it. This sequence goes on continuing till i unplug my usb stick from my computer. The udev file(78-haier.rules) provided by the vendor is as follows:
ACTION=="add", SUBSYSTEMS=="usb",
ATTRS{idVendor}=="201e", ATTRS{idProduct}=="1008",
ATTRS{bNumInterfaces}==" 1",
RUN:="/usr/sbin/haier.sh 201e 1008"
ACTION=="add", SUBSYSTEMS=="usb",
DRIVERS=="option",
ATTRS{bInterfaceNumber}=="00",
SYMLINK="ttyMODEM"
The haier.sh script that the udev runs is as follows:
[Code]...
# may not use this driver if the product id is already compiled into another driver modprobe -a option echo "0x${VID} 0x${PID}" > /sys/bus/usb-serial/drivers/option1/new_id
View 2 Replies
View Related
Aug 31, 2010
I upgraded from 11.2 to 11.3 and with great disappointment I discovered that my HSPA modem, that worked out of the box under 11.2, work no more. At the first attempt NetworkManager is able to build the connection, I am able to use Yast to download new packages and online updating but at the first use of firefox the internet connection hangs up. Any attempt to disconnecting/reconnceting the usb stick gives the following error in the kernel echo:
[Code]....
View 2 Replies
View Related
May 2, 2010
After having trouble with Ubuntu 9.10 (solved with a nice modemmanager bug fix by a great user) here we are with the new Lucid Lynx: until now, just to be safe, I am trying my Nokia CS-10 USB stick (for wireless 3g connection) with the Live Ubuntu, and it doesn't even get recognized (no red light or anything else)...
Here's the log:
Code:
View 2 Replies
View Related
Apr 11, 2011
I got a Huawei E 173 mobile internet USB. But i cannot get it to work under linux, only under windows(it has a windows installer on it, in order to work).
View 2 Replies
View Related
Aug 28, 2010
I have a USB huawei ec1262 wireless internet stick from Reliance. I google'd on how to install it. I am using Debian Lenny. I know that there is a "mode-switch" package that needs to be installed but this is not available on the down load package list for Debian. i can find this & also instructions if possible on how to get this working on my Lenny system .
View 5 Replies
View Related
Jun 4, 2010
I tried to connect to the huawei cdma EC325 modem. using the network manager applet. System asked which tpe of connection i selected cdma and gave the username and password for the account and the password for my opensuse account.Still i cannot connect to the internet using huawei ec325 modem.How to rectify the problem What shall i do next.
View 2 Replies
View Related
Feb 5, 2010
I was absolutely dazzled, but my wife made me drop it after 20 days of not being able to get an internet connection.
I thought of trying again after so long to see if things had become easier for every Argentina user who has a Huawei connection (more than half of the country).
Unfortunately not.
The problem is the following:
I have a Huawei SmartAX MT810 usb-modem/router. In order to establish a connection, I need to run the following commands AS ROOT (which is why I cannot use a simple kde autostart bash script)
Code:
modprobe br2684 ; br2684ctl -c 0 -b -a 0.33 ; ifconfig nas0 up ; pppd call adsl
What's more, these commands cannot be run before the modem is operational, since they will end with an error.
In other distros I used to place these commands in /etc/rc.local. I tried placing them in /etc/rc.d/boot.local , but with no success: they are executed before the modem is operational.
In my complete ignorance of all things computer-related I thought it would be a good idea to place a caveat before the execution of the commands:
Code:
READYorNOT=$(dmesg | grep "modem operational") ; while [ "$READYorNOT" = "" ] ; do echo "Modem not operational" ; done
As a result the whole boot sequence gets stuck until I hit ctrl-c.
View 8 Replies
View Related
Aug 5, 2010
I can not get NetworkManager to handle my Huawei E220 usb modem. I have searched forums and tried a lot of things. I have just upgraded from openSUSE 11.2 to openSUSE 11.3 using zypper. It seems to work fine except that umtsmon stopped to work, so for now my laptop has no connetion to internet at all. Here are some information about my settings:
I have used usb_modeswitch to make the device a modem. Am I right if I say that usb_modeswitch is a one time command, or does it swap the setting each time it is called? Anyhow lsusb states that the device is a modem. (All the time.) code...
View 7 Replies
View Related
Aug 29, 2010
I just want to tell everyone how good the Garmin/Asus A10 mobile phone is as an internet modem.I am in Australia and Mobile internet is an expensive thing to have. cheapest is dodo but i had a few problems trying out a friends usb modem.Anyway i was in the market for a Gps phone and discover this one. it is Android phone and pretty cheap so far it is very good gps, camera, mp3, and phone is excellent.BUT here is the clincher. when you plug it into the computer, the phone screen lights up and gives you 3 options.
View 1 Replies
View Related
Jul 9, 2010
I have a weird problem on my laptop. Everything works okey on PC though.
I'm using kNetworkManager on my OpenSuse 11.2 on PC.
Everything works fine there with the following settings:
1. Make a new GSM Connection in kNetworkManager and enter settings there
2. Edit etc/sysconfig/network/config file and set .....DNS_Policy from "auto" to ""
3. Enter openDNS to /etc/resolv.conf (nameserver xxx.xxx.xxx.xxx)
It works like that on my PC.
I did the same on my laptop. The modem connects fine, but the DNS'es ain't resolved. So skype etc will work, but no pages will open in Firefox for example.
What else should I need to do to make this work?
It's weird it works the SAME way on my PC, but doesn't on my laptop.
View 3 Replies
View Related
Dec 26, 2009
I have a little bit of a prediciment with my Mobile Broadband dongle, even though I know I'm in a 3G area (Dongle Supports 3G connection) my internet still loads at the normal GPRS speeds max of 5kb/s. Is there anyway to change the speed of it or do I have to keep with GPRS at the moment?
View 2 Replies
View Related
Jan 9, 2011
I connect to the internet with a mobile broadband dongle. I would like to change the dns settings as page loading seems to be running slow. However, there is no ip tab associated with mobile broadband in the knetwork manager module. There is however for my vpn connection. I have found reference to the ip tab in other postings but alas I am stumped. Is it possible that the mobile broadband connection does not load that tab whereas users on wireless or ethernet have it? That is the only solution I can think of.
View 2 Replies
View Related
May 22, 2011
I have a Huawei E173u-2 mobile broadband usb stick. It is recognised as a gsm-modem and shows up as such in the networkManager-plasmoid. I have set up the connection details for my ISP (O2), but I can't connect. When I click on the connection, "signal strength" is shown as well as "operator" (o2 - de). The "connection state" changes to "Preparing to connect", then "Setting network address". Then the modem vanishes and comes up again a few seconds later.
Here is the log (/var/log/messages):
Code:
It seems like there is a connection for about 5 seconds, then the modem hangs up and restarts .
The stick works fine with our windows netbook, so I don't think it is a hardware failure.
How do I get this working?
My system:
opensuse 11.4
kernel 2.6.39-30-desktop (2.6.38 gives the same error)
kde 4.6.3
plasmoid-networkmanagement 0.9.svn1192577-168.6
View 2 Replies
View Related
Jan 13, 2011
i have a huawei e180 mobile internet usb stick in Portugal, that i use to get internet, but as i have switched to Linux , i was wondering if this would work, as before it would install software on the system to run the internet?
View 9 Replies
View Related
Dec 20, 2010
I am a long time gentoo-user (~10 years). Just bought this new laptop and don't want to take the time to compile everything. During my search for a nice binary distro, I found the KDE reloaded CD, which I then downloaded. That was because I had a great hassle to find a Distro which supports the latest KDE, I was used by gentoo. Well, I am very impressed: Installation went flawless and the Distro is very up-to-date.
Well, now to one of my problems: I have this mobile internet stick:
Code:
ID 12d1:140c Huawei Technologies Co., Ltd.
which also gets detected as a modem. So far so good. When I now try to set it up, the KDE networmanager just segfaults badly... This is the output from the error report:
Maybe there is a possibility to set it up command line?
Code:
Application: KDE-Kontrollmodul (kdeinit4), signal: Segmentation fault
[KCrash Handler]
#6 0x00007f60ca29ea7a in ?? () from /usr/lib64/kde4/kcm_networkmanagement.so
#7 0x00007f60ca2981c1 in ?? () from /usr/lib64/kde4/kcm_networkmanagement.so
#8 0x00007f60de2bb87f in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib64/libQtCore.so.4
[Code]....
View 1 Replies
View Related
May 25, 2011
i am using mobile broadband to connect with network after i connecting mb.it drops it's connection for every 10 minutes.i need to restart to reconnect it.it is happening in kde.
View 5 Replies
View Related
Jan 11, 2011
I want to connect my mobile LG Gu285 using data-cable to connect to the internet in OpenSuse 11.3 but the OS is not detecting mobile's usb data modem. I used sudo wvdialconf create command to configure my phone's modem but no modem is detected. I configured bluetooth modem in "rfcomm1" and got success in connection but after a restart I am unable to connect again, throwing error "Modem not found".
View 7 Replies
View Related
Feb 20, 2011
I am trying to use the HUAWEI E1756C USB stick to connect to the internet. Installing usb_modeswitch and usb_modeswitch-data allowed networkmanager to "recognize" the stick and set up a mobile broadband connection.
The result is that NM succeeded in connecting (one of every five attempts) but firefox does not surf, nor emails can be downloaded etc. Just like if not being connected. The USB modem shows the steady blue LED as connected.
A NM issue? I have tried disabling NM control and tried with PPP clients like NMTSMON, wvdial and even Sakis3g. All with the same results. They seem to connect and show flux up and downloaded but no surfing.
resolf.conf shows is pretty much empty and no DNS there.
The working settings in Window$ are:
Same settings with Sakis3G, or NMTSMON or NM result in connection with no action from applications that use the internet.
I have had a similar issue with WLAN each time I change to a different network. I solve that by forcing to update the DHCP. I mean using -su dhcpd wlan0
But attempts like dhcpcd ttyUSB0 or dhcpcd ttyS0 get the same result. So no idea if this is an DHCP, or DNS or another issue.
My box is an ASUS EEEPC 2005H netbook with OpenSuSE 11.2 and KDE
View 2 Replies
View Related
Jul 5, 2011
OpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
View 7 Replies
View Related
Aug 27, 2010
On google there is no information. Opensuse does not know anything about this chip. On that stick is a driver for Win 7 64 and a linux driver for debian. I shall " dial up" with an analog modem to get into the internet. All at the console over ppp and comands like pon and poff. there is no networkmanager. The web `n walk stick and its label is Fusion II. Perhaps anybody has similar problems.
View 2 Replies
View Related
Aug 17, 2010
Should this mobile broadband stick work? It's not showing in Network Manager.
[Code]....
View 6 Replies
View Related
May 16, 2011
I'm new in SUSE 11.4. My problem is: I'm using Alfa AWUS036H card. It's recognised and I can establish connection to my network, but cant get to Internet. I can't surf the web cos Firefox tell me that connection is timed out. Now I'm confused why I can't surf the web even if I'm connected. Also, I trayed to instal linux drivers for this card folloving Ubuntu "how to" and it just dont work.
View 4 Replies
View Related
May 7, 2010
I use tata docomo as my carrier. I have activated GPRS and many people say that it works perfectly on a laptop with Windows. But I don't use windows. My service provider has not provided us with a username and a password. It works fine without these on the mobile and a laptop with windows. But when I use it on ubuntu 9.10 with wvdial, it exits saying required username and password. How do I overcome this problem.
View 1 Replies
View Related
Jun 10, 2010
It is just 3 days that I am using Linux Opensuse 11.2. I got a problem with Internet connection: I have HUWAEI E1550 3G Modem, but I have no idea about using it on Linux OpenSuse 11.2. Now I use it Windows7, there is no problem, because there is a program and driver for modem.
View 1 Replies
View Related
Aug 29, 2011
I have bought a TV which has possibility to connect via LAN to Internet. At this moment I have no router but I suppose it should work also via PC where is 2nd net card. (of course PC must be ON)
So I connect TV to PC to one net card and from 2nd to internet (provider socket). But how should I set the PC to work it? Allow both cards, it is clear but is it enough? I dont suppose
PS: if important, KDE and oS 11.3
View 6 Replies
View Related
Dec 18, 2010
I'm kinda new to ubuntu. I have no knowledge working on linux machines I started to use ubuntu just over 3 weeks back and it's quite good over windows machines. I want to know how can I share my pc's Internet connection with my mobile phone (Nokia N70). I've done this with my windows machine with the help of gnubox and mRouter. I want know is there any similar simple way of doing it on ubuntu? I'm having ubuntu 10.10.
View 2 Replies
View Related
