Ubuntu Installation :: 10.04 Upgrade Breaks LIRC (No Longer Works)
May 2, 2010
I had a working lirc using my hauppage card. After upgrade to Lucid, it no longer works. I don't see errors, but it appears to me is is not detecting the Hauppage card:
Code:
mythuser@PVR1:~$ dmesg | grep lirc
[ 19.761015] lirc_dev: IR Remote Control driver registered, major 61
[ 19.928886] lirc_i2c: chip 0x0 found @ 0x18 (Leadtek IR)
[ 19.928890] lirc_dev: lirc_register_driver: sample_rate: 10
[61920.300286] [<e086d654>] lirc_unregister_driver+0x44/0x160 [lirc_dev]
[61920.300289] [<e089a02b>] ir_remove+0x1b/0x30 [lirc_i2c]
[61920.300318] [<e089abc2>] lirc_i2c_exit+0x12/0x14 [lirc_i2c]
View 1 Replies
ADVERTISEMENT
Feb 15, 2010
I recently upgraded from 9.04 to 9.10 and the sound on my machine no longer works. I was previously using the OSS for sound. I'd like the sound solution that requires the minimal effort and I don't necessarily need to run OSS again. Ubuntu is installed on a Dell Optiplex 960.
Code:
aplay -l
results in:
Code:
aplay: device_list:223: no soundcards found...
[Code].....
View 9 Replies
View Related
May 28, 2010
When I run update manager, it gives me an error message saying:
Code:
This can be caused by:
* A previous update which didn't complete
* Problems with some of the installed software
* Unofficial software packages not provided by Ubuntu
* Normal changes of a pre-release version of Ubuntu
if I click partial upgrade, it looks like it did during the upgrade, then says:
Code:
There are no upgrades available for your system. The upgrade will now be canceled.
if I click close from the first "not all updates can be installed" dialog, it says:
Code:
It is impossible to install or remove any software. Please use the package manager "Synaptic" or run "sudo apt-get install -f" in a terminal to fix this issue at first.
running the suggested line gives the following output:
Code:
In Synaptic, fixing broken packages does nothing. Mark All Updates > Apply seems to work, but I'd still like to figure out why Update Manager does not?
View 7 Replies
View Related
Jan 5, 2011
Since I upgraded to 10.04 and ran Computer Janitor, the Xiphos Bible Guide no longer works. The splash screen comes up for a second and then disappears. I've tried removing and re-installing the program to no avail.
View 3 Replies
View Related
Apr 30, 2011
I have just upgraded to 11.04 from 10.10 and my wireless no longer works, the laptop is a dell inspirion 1501.
View 2 Replies
View Related
Jan 12, 2010
Before I upgraded to Karmic, I had Japanese text input set up on my system, but since the upgrade it no longer works. I can still read Japanese text, and when I press Ctrl+SPACE I still get the ANTHY box in the bottom right-hand corner, but Japanese is no longer on the list of supported languages. how to get Japanese back?
View 1 Replies
View Related
May 16, 2011
I recently upgraded my Zepto laptop to Natty (11.04), and unfortunately the wifi no longer worked. I have a WPA net, and the combination with a Ralink chip seems unfortunate - judging from the number of internet posts.After browsing loads of threads on the 'net I think I have found a solution for 11.04 - it will work out of the box in 11.10 !
1) Add "blacklist rt2800pci" to /etc/modprobe.d/blacklist.conf
I think this makes the wifi stuff work as I can then do "iwlist wlan0 scan" and get reasonable output. But there is no integration with the Network Manager. So I have also done this (again, with inspiration from a few threads):
2) Edit /etc/NetworkManager/NetworkManager.conf - change the "managed=false" under "[ifupdown]" to "managed=true".
You may have to do a "service network-manager restart", restart or similar to get it going.It also seems I can suspend and get a wifi net connection upon wakeup.
View 1 Replies
View Related
Jun 17, 2009
I was successfully using samba + fedora directory server in fedora 10 as a primary domain controller for my home network (achieved mostly by following barry905's instructions here: [url].
After upgrading to fedora 11, some of the pdc functionality no longer worked.
For example, when i ran 'pdbedit -Lv', i got:
Code:
I was able to fix this by adding to the [global] section in /etc/samba/smb.conf:
Code:
I also found that i could no longer join an xp computer to the domain. i discovered that for some reason, the samba administrator password had been cleared. after running:
Code:
That was fixed.
The last problem, which i have still not fixed, is that roaming profiles no longer work. when i try to do a domain login as user 'htpc' from an xp machine, i get the following message in xp:
Code:
Here's an excerpt of my /etc/samba/smb.conf:
Code:
View 14 Replies
View Related
Jun 17, 2010
my HUAWEI E160E Virgin Mobile no longer works after upgrade to Lucid it is detected but the connection no longer works. I tried deleting the connection and trying again but the modem is not detected in network-manager. The modem was working when i was using Karmic and still works on my UNR Karmic Netbook. I have tried various methods but I have not been able to get it to work.
View 1 Replies
View Related
May 8, 2010
I made a USBbootdisk and installed 10.04 the day the final release came out. I installed it, used this post install guide http://blog.thesilentnumber.me/2010/...de-what-to.htm, and it has been working like a charm since then. When I went to log on to it today, the log in screen comes up as normal, I enter my password, ubuntu thinks about it for a minute, and then sends me right back to the log in screen.
I have an Asus EeePC 1005, dual booting Windows 7 Starter/Ubuntu 10.04
I just want to see if this is fixable before I wipe the partition and reload ubuntu.
View 2 Replies
View Related
Aug 1, 2010
Have recently updated 10.04 with latest updates which included a new kernel and the printer no longer works. In-fact I can't even define the printer and I don't have a printer installed, the install script can't locate the printer on the USB. I have a cannon MP640.
I can print OK through windowsXP on virtualbox, printer is found OK.
Everything was fine until latest update.
Also my USB TV card doesn't work anymore, it also was OK before the update.
View 8 Replies
View Related
Jun 30, 2010
I have an ATI radeon HD 3400 series video card, and the open-source drivers make my computer run really hot. I tried installing FGLRX by using "Check For New Hardware Drivers", but it did not work, so I installed the ATI catalyst 10.5 package from AMD's website, and am using Xserver-xorg-core-1.7.6-2ubuntu7+backclear1 from k0ekk0ek's PPA so there is no lag when minimizing windows and such.
Everything was perfect until the 2.6.32-23 kernel update came along. I let it update, and rebooted, but the ATI driver no longer starts, even when I uninstall and reinstall it.
I am just using the 2.6.32-22 kernel for now, as the 2.6.32-23 kernel still runs hot without the ATI driver enabled. I would like to start using the new kernel at some point...
View 4 Replies
View Related
Apr 15, 2011
X is working, I get a desktop, all updates are current, just no Unity menus/window/widgets/whatever, blank desktop with single mapped network folder and no working keyboard shortcuts after initial login. I upgraded on Alpha 2 and it ate my desktop, never has given it back for 3 months. I assumed eventually the upgrades would fix it. Looked into ditching Unity and doing GDM, but thought I'd wait it out, ran dpkg-reconfigure unity and it did nothing, can't find any relevant errors in the logs, where should I be looking and/or what should I be doing? Running lots of servers on this box and have dual-boot, otherwise I'd probably torch it and start over.
View 1 Replies
View Related
Jul 19, 2011
I've just installed Lucid Lynx on both my machines in the interest of sitting and waiting for the Unity/Gnome 3 storm to blow over. On the HP (see below), everything works great, and I've followed instructions online on how to upgrade to LibreOffice, upgrade the kernel to 2.6.38 using the kernel PPA, etc.
However, on the IBM, I'm using Nvidia proprietary graphics drivers. These work well on the stock kernel that 10.04 installed (2.6.32-32), but installing 2.6.38 seems to break the driver. If I install the driver first, and then the kernel on top, X stops working and I have to revert to the default, generic driver to get back in. Once there, I cannot install the driver again. The Additional Drivers dialog goes through the motions, but then drops a "systemerror: installarchives() failed" error message.
So, is there a different version of the driver I should be trying to install? I should clarify at this point I tried all three options the Additional Drivers dialog provided me, all gave the same result (version 96, version 173, and version current).
Or should I leave the kernel at 2.6.32? Is there any downside to leaving it?
View 7 Replies
View Related
May 4, 2010
I upgraded my system from 8.04 to 10.04.Now I keep getting errors saying that my adobe nonfree installation is bad. The worst part is that when I try to uninstall the Adobe package to start from scratch, it says that the problem is so bad that it can't be uninstalled, but must be re-installed.Of course when I try to re-install it, I get errors saying it's corrupt.I'm caught in a chicken and egg situation here.
Also, sound no longer works on my system.I think this is most likely a symptom of the first problem, but I'll just put it out there.I've read the other threads explaining how to fix this, but nothing works.
View 5 Replies
View Related
Nov 8, 2010
al@ONE:~$ scanimage -Ldevice `epson2:libusb:001:016' is a Epson Perfection610 flatbed scannerScan error is returned in gscan2pdf saying 'invalid argument'Simple Scan says 'failed to scan' and 'unable to start scan' Scanning always worked with previous versions
View 1 Replies
View Related
Feb 11, 2010
I just upgraded to lenny (stable) from a working etch system. It went pretty nicely but I'm having a problem with the print system.
Ok, I have an HP Laserjet 4M+ connected to my system by USB. (I have another color printer too and a scanner but I don't use them often).
I use CUPS. I never bothered with the HPLIP packages because straight cups has always worked well.
What happens now is that I'll send a job to the printer and nothing will happen. The printer won't get it. Looking at CUPS on the localhost:631 page I can see that the printer is on, connected, ready; the job is there too but just stuck on "processing".
Now here's the thing. If I manually load the ehci_hcd module with "modprobe ehci_hcd" then the job will make it to the printer and it will print.
I can't just make that module load at boot time because if I do and the printer is off, it doesn't work. (I have to unload it and reload it). For whatever reason, I have to make sure that module gets loaded AFTER the printer is turned on, or nothing gets sent to the printer!
View 10 Replies
View Related
Apr 30, 2011
I upgraded from Maverick a few days ago, and ever since, OpenGL effects are getting disabled by KDE with a message stating that the effects were making the machine slow. Switching to Xrender works fine, but XRender isn't as advanced as OpenGL.
View 9 Replies
View Related
Jun 12, 2010
I am running Ubuntu 10.04LTS on two PC's, one PC is running Ubuntu 64-bit, the other is running Ubuntu 32-bit. They are set up on a network to share a HP Colour Laserjet 2600N printer. However, I cannot configure either PC to use the printer. I am using the "HP LIP" toolbox in "System -> Preferences" but every time it detects that it needs a binary driver from HP, it goes to the HP website, where I am prompted to accept a license - then it starts to download the file only to fail. The logic seems to go into a loop at this point and the missing installation file that the system needs simply cannot be downloaded. I've tried looking around the HP website but I cannot find a solution there.
View 1 Replies
View Related
Jun 17, 2011
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
View 2 Replies
View Related
Mar 27, 2011
Today I installed an upgrade through update manager of the Adobe Flash Player Plugin and it breaks the flash in all three of my browsers: Firefox, Opera and Chromium. Had to revert to previous version to get it to work. Ubuntu Version 10.10 i386 Sony Viao Laptop.
View 2 Replies
View Related
Jan 20, 2010
when i installed it the windows 7 Partition no longer works. I can see the windows 7 partition but when i click on it, it just reloads the grub boot loader. Im in college and need the windows 7 partition.
View 5 Replies
View Related
Nov 22, 2010
I have a problem with the openoffice 3.1, install it and I worked fine in Fedora 14, but I restart the system and no longer works. nothing happens with any file.
to download from the official site and install it manually.
I can not fix
View 7 Replies
View Related
May 4, 2010
After upgrading to lucid, the remote that accompanied my macbook 4.1 appears to do nothing. (Testing with irw and xev). The howto at [URL] avoids any reference to the remote. I had it working properly in karmic. The howto at [URL] fails to help -- and is pretty much what I'd successfully done under kamic. The following launchpad post accurately describes my experience: [URL]. Has anyone resolved, found a workaround for, or otherwise had success getting lirc to work on a macbook with lucid?
View 1 Replies
View Related
Mar 1, 2010
The last time I updated Linux it was from Gibbon to Heron. (so 7.10 to 8.04 ) I'm now trying to get caught back up. Thing is, now that I updated from 8.04 to 8.10 I can no longer get to a GUI. Also, most of the text in the terminal is a diamond character as if the font that's installed doesn't want to work most of the time. This is somewhat confusing, but I believe my system's language was set as Japanese before the upgrade and now it's trying to display Kana and/or Kanji and the terminal doesn't like that. Not really important, but I'm not sure how to proceed to the next upgrade or get to a GUI. Fortunately, my system's set up to dual-boot with windows. Can someone help tell me how to get my GUI back or what package to install?
I'm running on a laptop with an ATI mobility Radeon 9700. I've had problems with it and drivers in previous versions back to 6.10 too, but never to the point that the GUI wouldn't work.It's actually an issue with my X Server. I tried "startx" and it says "No Screens found". I looked in my xorg.conf file and there are two screens listed at the bottom. It produced a log too, but I can't get my Flash drive to mount so I can't say exactly what it says. It did mention that there were a lot of font directories that didn't exist along with a few other warnings.
View 2 Replies
View Related
Mar 10, 2010
gedit has not been able to detect the character coding.Please check that you are not trying to open a binary file.Select a character coding from the menu and try again.If I open OpenOffice first and then the document it works fine. If I use the shortcut directly, it won't open.Not overly impressed with 9.10 so far; things seem much slower, and it's certainly not as simple to find things as the old layout was.
View 4 Replies
View Related
May 8, 2010
My knowledge of how Linux works is very limited. I've used it for about a year, but just doing very basic tasks (browsing the Internet, listening to music, etc).
Anyway, I upgraded to the newest edition of Ubuntu and installed the new Grub as the update seemed to recommend installing it to every partition and hard drive. I've seen that other people are now having issues from doing that as well.
I am able to boot into Linux just fine; it is working great. However, when I attempted to load Windows XP from Grub, the computer would just restart. I followed the recommendation listed here: http://ubuntu-ky.ubuntuforums.org/sh...95&postcount=3 which seemed to fix the problem for Windows 7 users. Now, all I get when I attempt to load XP is a blank screen with nothing but a blinking cursor (but hey, at least the computer isn't just automatically re-booting, that's some sort of progress...maybe...)
View 4 Replies
View Related
Jul 22, 2010
Summary: After intermediate upgrade, Ubuntu Lucid LTS 10.04 64bit Desktop Edition will "NOW" not run in any Graphics mode on my machine.
General; Ubuntu has been my favorite OS to live on, play and relax. I have to use other OS'es, but I choose Ubuntu as "mine". I can go around it safely and tweak it to my own likings and needs. It has also been a great tool to exchange things between other OS'es.
History: I started with Ubuntu Karmic Koala 9.04 64bit Desktop Edition. Last March, I upgraded to Ubuntu Lucid LTS 10.04beta 64bit Desktop via the Update Manager, using Ubuntu's instructions... as a Beta Tester. I kept up with Updates and everything had been fine.All went well, albiet minor adventures that gave me oportunities for enriched challenges and training. Overall, since the early days of that, my system has been very stable and reliable- Until last Saturday through Yesterday...
Problems: First thing I noticed is that there were some security updates Friday. Saturday when I came up into Ubuntu, it came up in error saying it had to come up in a low graphics mode. I shut down the system and restarted. It came up fine and I thought nothing more of it at the time...
Second, I tried to install Ubuntu Lucid LTS 10.04 64bit Server Edition on another drive. My other drives were isolated. Although the install said it was successful, on reboot, it would not boot the system. It would get a purple splash on my screen, then either lockup or go to a text based screen dump. Server Platforms said this was a text based OS and couldn't explain the purple flash or the error... I shelved this project until later and thought nothing more of it.I checked for updates through the weekend (even though there usually isn't any on weekends), and as usual it said everything was up-to-date.
Third, Monday the "Update Manager" said there was too many updates to do at once, that it needed to do a partial update. I selected, but it couldn't complete, because it said that there was conflict on a KDE package that it said it needed to remove, but couldn't because it was in a blacklist. It further said that this could have resulted from a DEV vervion of Ubuntu.
Fourth, I upgraded some packages through the Synaptic Package Manager, to try to reduce the number of packages that the Update Manager was trying to update. All those packages said they updated fine. I then went back to the Update Manager and it still said it needed to do a partial update... but it completed and said it was successful. I noticed that the top of the dialog box was tiltled "Distrubution Upgrade." I noticed that some of the files seemed to be an xorg upgrade... After the update, I had to do other things, so I shut down my system.
That was the last time this machine has been able to start Ubuntu. When Ubuntu tried to startup, it said it had to boot in a low graphics mode, but could not- it blasted the monitor with vertical purple and red lines.I had a copy of the Ubuntu Lucid LTS 10.05 64bit Desktop Edition LiveCD on my other machine. I burned a CD and tried. The only mode I can get to boot from the CD (on my machine) is in a text console- no xwindows system. On starting up an xwindows system will blast the grahics of the monitor, then (sometimes) continue to a monitor test-based screen dump that flashes by until the system locksup.
View 6 Replies
View Related
Oct 12, 2010
Upgraded to 10.10 with update-manager last night, apart from an xorg.conf.d location change and a custom xfce applet that needed recompiling all went smoothly... until I tried another dist-upgrade.
Previous I had debian lenny and squeeze available in apt - I know this is dumb but a sync program I use requires binary versions to be identical (unison), and I sync with a debian squeeze server.
Code:
deb http://mirror.aarnet.edu.au/debian/ squeeze main contrib non-free
deb-src http://mirror.aarnet.edu.au/debian/ squeeze main contrib non-free
deb http://mirror.aarnet.edu.au/debian/ lenny main contrib non-free
deb-src http://mirror.aarnet.edu.au/debian/ lenny main contrib non-free
[Code].....
View 1 Replies
View Related
May 11, 2011
I have one hard disk (call her HDA) that contains nothing but a single ext4 partition containing a backup of all my important data. I did a clean install of 10.10 on my primary hard disk (call her HDB) and from there proceeded to the 11.04 upgrade. In 10.10, I was able to read HDA just fine. However after the upgrade, I can no longer mount this drive.
When mounting from file browser:
Code:
Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
The end of dmesg said the following:
Code:
dmesg | tail
[49.853308] wlan0: associated
[50.084874] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[52.859533] Intel AES-NI instructions are not detected.
[52.890955] padlock_aes: VIA PadLock not detected.
[60.710006] wlan0: no IPv6 routers present
[82.130904] EXT4-fs (sda): bad geometry: block count 122096646 exceeds size of device (122096381 blocks) .....
[96.010858] EXT4-fs (sda): bad geometry: block count 122096646 exceeds size of device (122096381 blocks)
[107.791812] EXT4-fs (sda): bad geometry: block count 122096646 exceeds size of device (122096381 blocks)
[322.758948] EXT4-fs (sda): bad geometry: block count 122096646 exceeds size of device (122096381 blocks)
[516.932403] EXT4-fs (sda): bad geometry: block count 122096646 exceeds size of device (122096381 blocks)
For some reason my hard disk has a block count greater than the size of my device. I've done my background searching on this and tried a command line utility I've never heard of before:
Code:
# sudo e2fsck /dev/sda
e2fsck 1.41.14 (22-Dec-2010)
The filesystem size (according to the superblock) is 122096646 blocks
The physical size of the device is 122096381 blocks
Either the superblock or the partition table is likely to be corrupt!
Abort<y>? yes
And this is as far as I've got. I'm really hesitant to start fiddling around and experimenting with possible fixes because the backup data on this drive holds a decade's worth of work for me and is extremely valuable (hence why I have a spare drive for backups). I really didn't think that the Ubuntu upgrade process would mess with this drive, seeing as the Ubuntu install was contained on an entirely different drive. Any safest way for me to recover this data? Data preservation is the #1 priority for me here. I need to copy all of this data over to my primary drive where Ubuntu is installed. After that, I can reformat this "broken" backup drive.
View 4 Replies
View Related
