When i put CD in i can see it and everything. But when i eject pressing the button on my laptop it ejects fine but i can still see the CD on desktop and in my computer and i can still access it and run programs ect on it still. Even though the CD it ejected. If i eject by right clicking then that works fine but its just annoying.
View 6 RepliesI am using computers from past 10 years and never seen or heard this type of problem which I faced few hours back. I wanted to copy data from some CD's and DVD's onto my HDD, after some time I heard loud noise like some thing exploded in the CPU cabinet, I switched off the computer and I was shocked to see that the whole CD in the Drive is broken into pieces!
Immediately I removed drive and dismantled the DVD Drive and removed all the pieces, again fixed it, now everything works but the tray is not ejecting properly. Now I am worried to insert some important CD's and DVD's, I don't know what exactly happened? and I even don't know whether to continue with the same drive or its time to buy new drive? I am using it from 2006....
So I popped in a blank CD, opened up brasero, told it to create a new video project, added my files.... It told me to install vcdimager, so I did that and restarted brasero. I then told it to burn the video files to the disk as an (S)VCD. It began converting the files before the burn. After the conversion was complete, it gave the message "ejecting medium" and then it ejected the disk. After that, it said it encountered and error and wouldn't do anything from there. I tried a different CD, I tried just closing the disk drive. It just gives me the same error.
View 2 Replies View RelatedI'm trying to "Safely Eject" my USB mem stick and am getting:
"Volume is Busy"
And it's showing that it's the application:
x-nautilus-desktop
as the culprit.
Should I should down the Nautilus process? How can I unmount/eject the stick?
I've encountered a problem when trying to burn a video file to DVD using Brasero Disc Burner. I put the DVD and then open up Brasero and click on "video protect" then I chose the video file I want to burn, I click the "burn" button and choose the settings I want then when press the "burn" button once more.
I then get this screen...
It then ejects the DVD and I get this...
Not sure where to put this so please let me know if this does not belong here.I recently noticed that the "eject" command will not work on NTFS formatted USB drives. It errors out with something like:umount: <path to mount point> is not in fstab (and you are not rootIt works if you are root. I can also eject the drive from the nautilus desktop as an unprivileged user. This command also works if the drive is FAT formatted and I am an unprivileged user.I only started to notice this behavior after I switch to F14. F11, F12, and F13 did not seem to have this issue.Anyone have any clues as to how to fix this?BTW, auto-mounting works just fine, just plug the drive in (no "mount" command necessary). I'm only having issues with the "eject" command as an unprivileged user.
View 13 Replies View RelatedThis problem showed after fresh installation of Debian Testing (image is dated at 1 march 2010). When I want remove cd I click button on device but the icon is still at the desktop and in the nautilus too (in the left sidebar). I have to remove it manualy from nautilus or desktop ( option: eject ). This problem shows with packages like gnome-mount or gnome-volume-manager ot without them.
View 5 Replies View RelatedFailure to safely remove the USB with the following techniques:
1) umount /dev/sdd and I get the error "umount: /dev/sdd is not mounted (according to mtab)"
2) dolphin > right click the drive icon > safely remove: I get the error message "org.desktop.Hal.Device.Volume.UnknownFailure: Cannot open /media/.hal-mtab"
3) konqueror: sys:/info > click the drive eject button (nothing happens)
4) device notifier > click the drive eject button : I get a ERROR in Plasma Workspace that says "Could not unmount the device. One or more files on the device are open within an application" ... NOTE: this will happen on a fresh reboot with the folders of the USB never accessed, much less files being open on it.I have also noticed something similar when dealing with cds/dvds.... seems like I can only eject on a reboot.
I installed Debian Squeeze on my Acer AspireOne yesterday, and was delighted to see that my ZTE MF627 broadband dongle (from 3 UK) appeared to work "out of the box". I wasn't able to connect due to lack of signal, but the behaviour was as I expected. (The dongle is one with a "zero CD" that needs to be ejected before the modem itself can be accessed. Recent versions of udev are supposed to do this automagically.)
However, when I tried to use the dongle today, I was unable to make it work. It appears that udev is no longer ejecting the zero CD when it is inserted, but is instead detecting the modem as a (non-functioning) serial port.
Here is the output from /var/log/syslog for the "successful" attempt. Note the disconnection at 4769.479857 which is followed by reconnection as a different device:
Jan 16 14:11:30 john-netbook kernel: [ 4759.175449] usb 1-2: Product: ZTE CDMA Technologies MSM
Jan 16 14:11:30 john-netbook kernel: [ 4759.175459] usb 1-2: Manufacturer: ZTE,Incorporated
Jan 16 14:11:30 john-netbook kernel: [ 4759.175762] usb 1-2: configuration #1 chosen from 1 choice
Jan 16 14:11:30 john-netbook kernel: [ 4759.180622] scsi3 : SCSI emulation for USB Mass Storage devices
Jan 16 14:11:30 john-netbook kernel: [ 4759.181863] usb-storage: device found at 4
[Code].....
We developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.
View 2 Replies View RelatedI'm having a problem with my webdav share. I have a secure webdav folder that gets accessed via a non-standard port and requires basic authentication. I can connect and interact with it fine via cadaver. However, when I try to connect from nautilus, it says "Access was denied." To make it even stranger, sometimes I can click on the folder in nautilus (it still mounts) and access it. Sometimes not (just repeats the error message and won't show me the contents). I may not even un-mount it, but just look at other folder, then click it again and be able to access it, but again - only rarely.
I asked a friend to try connecting from his windows vista computer and it would not work. It would not work from my windows XP virtual computer either. However, it mounts and works just find from my work computer (also Windows XP).
So it seems to be a 50/50 chance that the drive will mount on any given computer/system and work. Do anyone know what the problem may be? I'm guessing user permissions, but I can't figure out what.
I've made sure the webdav folder is owned by www-data and www-data has read access to the password file as well.
When I try connecting from nautilus, I get this in the log file:
Code:
Here is one of the (many) sites I've tried looking at: [url]
ok so i ran into a problem, im using web min to access my server, and im setting up postfix and, dovecot first problem is i want to be able to access my email account from a web page, with log in, so my question is how can i do that?
View 1 Replies View RelatedI managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
I'm running ubuntu 9.10, and created a softraid5 with no problems. Now i need it to automount with user read/write access, and i need to make some network share folders. My fstab has the following line for the raid:
Code:
/dev/md0 /media/raid auto rw,user,auto,exec 0 0
After i mounted it, i changed the permission with:
Code:
sudo chmod 777 /media/raid/
So now i can create folders and files on it.
Then i created some shares, one with guest access and other with no guest access.
Now the questions:
1) If i access the guest shared folder via WinXP, i create files and folders, but they appear locked on ubuntu, so i cant access them until i change the permissions. If i go to proprieties/Permissions, the owner is "nobody".
2) What password do i need to use on WinXP, and i try to access the non-guest shared folded? Do i need to create a user just for that?
i put a windows program on my ubuntu pc and it's a portable program so i had to add a shortcut to the menu myself, well, i got the shortcut added but when i click it, it says that it cannot access it and it also says Permission Denied.
View 7 Replies View RelatedI connected my laptop running with Ubuntu 11 in the LAN but I couldn't access internet.But I could ping to the other computers connected in the LAN. I tried the same thing with windows 7 in the same laptop and I could access internet.
View 1 Replies View RelatedI've created a new user for a SSH tunnel only.After login I can access all directories because permissions is set for "Others" to "Access files".Now my question: Is this normal that permissions for Folder access for "Others" is always set to "Access files"?I don't want my SSH tunnel user accessing the directories.
View 4 Replies View RelatedI installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error
- no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
[code]......
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies View RelatedI've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
smb.conf follows:
# Samba config file created using SWAT
# from UNKNOWN (>)
# Date: 2009/06/12 14:15:15
[code]....
i need office 2007 to complete school work as openoffice doesnt support access databases. i switched to linux as i didnt have my recovery discs for windows and wanted to start afresh. my problem is that i have got word,excel,powerpoint & publisher working but access just wont load. i click the logo and it does say starting access on the bottom taskbar but then it disapears and nothing happens. ive tried google and havnt really found a answer im running ubuntu 10.10 and i have wine installed This is kind of urgent as i have a deadline fast aproaching and need access at home to progress in work
View 3 Replies View RelatedI have an old FC2 box running Squid version 2.5. It has been running since 2003 so I am in the process of replacing it. I have a new machine with FC11, iptables, and Squid 3.0 installed.
On the old machine I use iptables to intercept Port 80 traffic and send it to Squid. By default I block all internet access and allow only sites that are in an Allowed_Sites.txt file. Within Squid I also have statements to allow certain users to bypass Squid based on their IP address.
I have set up the same thing on the new box. I have iptables intercepting the Port 80 traffic and sending it to Squid. That is working because if I remove the redirect statement from iptables all internet access is blocked.
The problem I am having is that Squid is not blocking any websites. It acts like the ACL is set to http_access allow all. I have worked on this for several hours and am stumped.
These are my Squid rules:
acl allowed_sites url_regex "/etc/squid/Allowed_Sites.txt"
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32
acl SSL_ports port 443
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access allow Bypass_Users
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
acl our_networks src 192.168.1.0/24
http_access allow allowed_sites
http_access allow our_networks
http_access deny all
icp_access deny all
htcp_access deny all
http_port 192.168.1.254:3128 transparent
hierarchy_stoplist cgi-bin ?
access_log /var/log/squid/access.log squid
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|?) 0 0% 0
refresh_pattern . 0 20% 4320
visible_hostname FC11.proxybox
icp_port 3130
coredump_dir /var/spool/squid
I have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
View 5 Replies View RelatedHave no idea what I am doing operating a server. Our programmer got a new job and I am the one who has to take it over. Everything was fine til yesterday. You see I made a control panel to easier update the site www(dot)discoverysound(dot)com
but yesterday when I went to update the site I got an error called fopen. I thought I fixed it (and boy did I ever) but now I cannot get to my site because it says Forbidden You don't have permission to access / on this server. Apache/2.0.47 (Unix) mod_ssl/2.0.47 OpenSSL/0.9.7a DAV/2 PHP/4.3.3RC4-dev Server at www(dot)discoverysound(dot)comPort 80.
I am dual booting OpenSuse 11.2 and Windows 7 both 64bit on my PC. I've got VMware workstation installed on both. I've got few virtual machines which were all created in Windows VMware and they're all stored on a separate partition. I can access this partition and all other NTFS partition from Suse but with read-only permissions. That means I can't run any of these virtual machines from Suse VMware. Is there any possible way to make all these drives writeable from Suse? I'm really hoping someone would be able to help me. I've got a lot of googling and have even searched this forum but without any luck.
View 4 Replies View RelatedI have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
View 1 Replies View RelatedI've recently installed CentOS 5, because I needed a good OS to run VMware Server. Just a heads up, I'm not very familiar with RH/CentOS distros, I usually use Arch Linux. My VMware install went fine, config is standard settings. Now I'm trying to access the VMware Infrastructure Web Access using port 8222 (http) and 8333 (https), but it's a no go. I'm connecting from another machine on the LAN, as the CentOS box is headless. I restarted the vmware services, and they seem to be launching fine. I don't know much about VMware though. I verified with netstat and ports 8222 and 8333 are listening.
View 3 Replies View RelatedI'm a terrible procrastinator, it's awe-inspiring annoying and stressful. This in combination with being a information-holic makes the Internet fairly lethal to me; I risk failing my college course because of it, so trust me when I say I'm deadly serious about this.
However, I think you guys may be able to help out, and maybe this will also help some people here with similar problems:
Because so much of my time is taken up with Interwebz, I thought to carefully restrict my internet use. It's not prefect, but it's part of a solution.
To date: I have Firefox and the ProCon extension which uses a whitelist of websites I can access. The extension cannot be uninstalled/disabled and I use a long hex password split into 3 parts, two of which my friends have (so I have to ask my friends for the password parts in order to update the whitelist, hence making it socially awkward to fritter away time online).
So far, it has worked a treat and I'm really pleased with it.
However, this is the problem:
I need to restrict web access so *only* Firefox can access the web. That way I cannot use Chrome/Opera, or even (shudder) use wine to run Internet Exploder.
I am using RHEL5 in that i have installed samba rpm as well as created samba users while access the shared folders in WINDOWS i got "access dined" error.
View 1 Replies View RelatedI have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?