Ubuntu :: Compiz Dies After Update?
Aug 17, 2010what to type in terminal to diagnose this?
I typed "compiz" into the terminal and attached the readout.
what to type in terminal to diagnose this?
I typed "compiz" into the terminal and attached the readout.
Am trying to set up a new system but am getting some strange behavoir. I've administered an Irix system before. I have opensuse 11.3 installed with gnome running. When i enter a bad user id in the windows login screen, the bad authentication causes the x window manager to crash and leaves the system in the ascii terminal mode login. I then have to login as root and do an init 3 , then init 5 to get the x server started again an get the windows login started. Has any one seen this behavior before and how can i fix this. Been hunting through /etc/X11/xdm to see what startup scripts could be causing this.
View 2 Replies View RelatedI updated my CentOS 5 box recently. But after then my Apache can no longer work; every time I try to start apache, it says started OK but then dies immediately and no error message at all. When I tried 'apachectl restartI', it says apache not running. It has been running fine before the update. I've looked at /var/log/httpd.log but there is not any message about my problem.
View 14 Replies View RelatedThis sux cause im new to ubuntu and it was working great on my laptop but after a recent update the wireless (wifi) connection just dies after 1 minute. The connection is still active, the icon shows full signal, nothing seems wrong at all, but there is no internet communication at all.
If I disconnect and reconnect I get proper internet comms for another minute, then it goes dead again!
This all started after a recent series of updates.
Computer:
Toshiba Satellite L505D-S5965
AMD Athlon X@ Dual Core QL-65
ATI RADEON 3100
Realtek RTL8187SE Wireless 802.11b/g 54Mbps PCIE Network Adapter
Realtek audio
Software:
Dual boot Vista (original factory installation) ubuntu added 2nd
All the latest kernals and non-beta releases as of 02/18/2011
I was almost ready to go all ubuntu, but I had to log back into vista to get internet to try and find help. ubuntu has been like this for weeks, but i havent had the time to try and find out what screwed the pooch on my wireless....
During a routine update of my desktop (ubuntu 10.04), the update is hanging at "unpacking replacement compiz-gnome". I was wondering if it is safe to kill the update, and, if not, what else I could do. This has been hanging there for about 2hrs now, so its not just taking its time.
View 1 Replies View RelatedI downgraded to Compiz 8.6 with the GNOME 2 desktop using these instructions: [URL]. Today, however, my system wanted to do a "system upgrade", and now I get warning messages like this:
Code:
emil@Emilubuntu:~$ sudo dpkg --configure -a
dpkg: dependency problems prevent configuration of ubuntu-desktop:
ubuntu-desktop depends on unity; however:
Package unity is not installed.
dpkg: error processing ubuntu-desktop (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
ubuntu-desktop
And when trying update manager:
Software index is broken
Code:
It is impossible to install or remove any software. Please use the package manager "Synaptic" or run "sudo apt-get install -f" in a terminal to fix this issue at first
Now I'm not sure it is good advice to do sudo apt-get install in force mode, since the problem seems to be - I'm guessing - that update manager is trying to install packages with are for the unity desktop and not my classic gnome+compiz 8.6 desktop.
I've just installed 100+meg of updates and rebooted only to find that when I login the desktop fails to boot. Opening a root-console, I killed Compiz which dropped me back to the login screen where I logged-in again with the desktop starting successfully. From there I disabled Compiz and have no problem starting the desktop now. But that's not really a solution.Even stranger, if I now try logging in with and older kernel version and with Compiz off - if I try enabling Compix now, the desktop just freezes - it also fails to complete loading the desktop. So both the current-kernel/Compiz seem to be linked to the problem in some way!Has anyone else experienced this, and is there a solution? I miss my desktop-effects!
View 2 Replies View RelatedI've been running compiz with no problem for quite a long time, even though my sources.list contained some weird stuff. At that time, running apt-get update would tell me that some of my sources couldn't get accessed to and that older file would be used. I checked it out and I found lots of sources refering to Feisty. here how it looked like:
[Code]...
Debian 5 64 bitGnome, using compiz-fusion.Compiz had been working well ever since I installed it last year; a couple of days back there was a debian update (I think and x-server update was there); now compiz does not work anymore. if I select compiz as the window manager from the cmpiz-fusion icon, I cannot move/resize wndows, the titlebar disappears.
View 6 Replies View RelatedAfter kernel branch update some times ago i found compiz very slowly, but with older branch compiz was not such slow as today.
Here is my uname:
Quote:
I just installed the latest compiz as per leigh's instructions - nice, easy install!I notice that the snow application is missing. That was my favorite, but where has it gone??
How about floating windows above desktop cube? Dodge? In which upon selecting a window, the non-selected windows move around it to move it to the front.I also notice that many window updates are very poor. For example, in the compiz settings manager when I switch tabs, the window does not actually update unless I move it. I click on a tab and it looks just like the previous tab. If I move the mouse around, it will update the wind in blocks under the mouse, but not the whole window.And, it would appear that the standard compiz is still available from my desktop settings in KDE. Could I have failed to remove the original compiz?
After the update on 7/03/10 edge+mouse button combo's don't work anymore, keyboard short cuts for the same function are still working. Example "Scale", keyboard short-cut ctrl-s working, edge+mouse button Right Edge - Right Mouse Button no action. Worked before...
View 6 Replies View Relatedi have a ubuntu 10 server (as server LAMP) , i was trying to repair a couple of unix files with fsck command on directory, thinking it would apply only that directory, but it affected all system, in th end it says: "file system has changes, restart ubuntu", then services go down, after some directories fail, restart funtion do anything... i switched on again, but at start show error.
I got another ubuntu and installed damaged hard disc, but, i can see file sytem, i has been trying to repaired with TestDisk but i can't...
i want to recover mysql database at least, but a don't know what to do.... how a fsck get damaged SO
My bluetooth manager is dying every few minutes or even every few couple of seconds. This happens when i'm using bluetooth mouse. Mouse works correctly cause i've tested it in windows. In the attachment there is dmesg output. In dmesg i keep geting lines like:
Quote:
[ 1463.864082] usb 4-1: USB disconnect, address 10
[ 1463.864601] btusb_intr_complete: hci0 urb eddf2900 failed to resubmit (19)
followed by reconnecting both, USB dongle and mouse. Then it works for a while and dies again, over and over. It also happens when mouse it idle (no matter if 5 seconds or 5 minutes).[URL]..
I have two servers, both running Ubuntu 11.04 Server. One is a web server, running only a LAMP stack and openssh-server. The other is running server daemons for TeamSpeak and Minecraft. Today, the game server just went down. I can access the LAN by using SSH to connect to the web server, and ping it from there. However, it won't respond to SSH or anything else. The server is a few kilometers from here, so I will be going there tomorrow.
This happened once before, probably about a month ago or something. That time, the web server was running just fine, but the game server was powered off. I thought there had been a power disruption, because when I checked the BIOS settings of the game server, it wasn't set to resume after AC power loss. The web server was set to do this, so it made sense that it would be up and running again after a brief power loss. There were also some news reports about power disruptions in my area.
The thing is, I changed the BIOS settings of the game server to make sure this wouldn't happen again. When I go there tomorrow, I will bring the server back up. However, I would like to know what caused this so that I may prevent it from occurring again. Is there a logfile or something that I can check tomorrow to find the problem?
I have Fedora 10 installed. I've just made an update of my system. Things that were updated were a new kernel version with devel and also something with NVIDIA (which is my video card).
After restart of my system, compiz fusion no longer works.
I have a NVIDIA-Linux-x86-177.82-pkg1.run -file to manually install the NVIDIA-driver so the advanced features of Compiz can be utilized.
After install, the bootup screen tells me that loading the NVIDIA driver has failed. I also receive a WARNING-message.
Over the past few weeks I've noticed that my laptop battery is dieing VERY fast. I have no idea what is causing this, and I haven't changed anything.
View 6 Replies View RelatedWhenever I use Ubuntu, the internet seemingly dies out randomly. It never does this for windows 7. Could it be the router coincidentally dying, or is it a problem with Ubuntu?
View 2 Replies View RelatedI don't want to 'spam', (I had started a first thread about this some time ago), but I'm (still) experiencing problems with my internet: I can use the internet (I am connected through a simple switch) for some time, that is: surf the internet (in firefox) and download using vuze (azureus) but after some time, the internet connection 'dies' (downloadspeeds jump to 0b/s and I am not able to surf to any site in firefox). When that happens, the only 'solution' to this is restarting my pc.
I first experienced this when using ubuntu 10.04, so I thought that it was a 10.04 issue. I knew that when I had ubuntu 9.10 (karmic koala) installed, this didn't happen. So today, I installed karmic koala, but much to my surprise I am experiencing the same problem. I used 'lspci' to find out what NIC is in my pc and I found out I have the following NIC: 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78 ) I'm suspecting the NIC to be the problem. Is this probable? If so, I want to buy a add-in network card (simple one, not a gigabit card)
This can't be duplicated by anything specific, but I know it's not out of RAM at this point. The console keyboard and mouse are inoperational, and the monitor display seems to be going through test patterns, which turns out to be that the monitor is trying to sync to video output which is switching on about once a second. I can ssh into the box and see that many processes that were running are no longer running, for example gnome-session... and that once per second there is a new X process invoked with a different auth-for-gem parameter, per below:
/usr/bin/X :0 -nr -verbose -auth /var/run/gdm/auth-for-gdm-Kynptf/database -nolisten tcp
(one second later...)
/usr/bin/X :0 -br -verbose -auth /var/run/gdm/auth-for-gdm-GfBhRk/database -nolisten tcp
[code]...
I survived a disk crash and had to re-install to a new(er) disk, now, the JRE is in line to be set up. It's installed according to the instructions...so when I test (using Runescape, for example) I get this traceQuote:
java.lang.NullPointerException
at java.io.FileDescriptor.incrementAndGetUseCount(Unknown Source)
at java.io.FileInputStream.<init>(Unknown Source)
[code]...
I am running 9.10 on a HP Compaq. Every few days X will die. The screen goes blank and will not display anything. I have to SSH in, but even trying various commands like gdm restart does not help. I eventually have to reboot the box. Below is a snippet (hopefully not too large) of dmesg:
/dev/sr0 on /media/cdrom0 is a CDROM, but I dont think thats the issue.
[707515.629800] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[707515.629806] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[707515.629811] Info fld=0x45d18, ILI
[707515.629813] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
code....
I recently installed the vt6656 wireless pci card that came with my zotac motherboard. I can associate with my ap and get an ip address successfully. When I disconnect my ethernet cable, however, my wireless interface stops responding (can't ping it). The box itself is in a place where I don't have a monitor connected to it so I cant see anything since my ssh session gets killed as soon as I disconnect the ethernet cable.
What would be the reason why the ehternet cable being unplugged, disconnects my wifi card as well? Does something get triggered? I did some testing with iptables, blocking the 8080 traffic to the wired interface, and noticed that the 8080 traffic also gets blocked to the wifi ip. I'm afraid that this never worked properly to begin with.
After installing (not upgrading) Ubuntu 10.04 official release, there is a problem with skype latest version. Sometime Skype dies, and it is impossible to restart it (only killall -9, and then launching), if im trying quit all skype windows turning gray and thats all. Messages that are sending to others are not sent, and also opponents can't send messages to me. It was OK with same skype version in ubuntu 9.10.
View 3 Replies View RelatedI installed 10.04 Server. Then I did an apt-get install Ubuntu-desktop. The display is black. The monitor is receiving no signal (amber led). I believe that the install has stopped, but what am I supposed to do.?
View 1 Replies View RelatedIt has been happening to me since I started to use this laptop from the company for a linux test bed. Several times a day, when I do something from the command line, for example running an application connecting to another host on the internet, etc,it comes to a freeze and does not come out of it. I can not do anything else than a forced reboot from the power button, because the keyboard and the mouse do not respond. This work laptop is a lenovo W500, running on ubuntu jaunty, release 9.04. I have not encountered this problem before with my personal laptop though. My person laptop is a lenovo X61s, running on ubuntu karmic, release 9.10Should I reinstall the work laptop with some other version of ubuntu? Could it be some hardware problem ? What tools should I use to diagnose
View 2 Replies View RelatedI know there already a LOT of posts on the forum about pulse audio. I had some problems upgrading from Karmic to lucid, Pulse just kinda dies, but I left it be. Recently I brought a fresh 1TB hard disk and decided it was time for a clean install of 10.04 to fix that. I am running of a clean install, only additional packages I have pulled down are the Nvidia driver, wine, and VLC.. the rest is 'out of the box' config. Have tried reinstalling 3 or 4 times, I get the same sound problem each time. Pulse works fine to start with, I can play music, play warcraft under wine with sound.
However as time goes on I find that the pulseaudio process takes up more and more cpu time. Eventually it hits about 90% plus then crashes out. The system hangs for a minute, then resumes with no sound. When I run "top" the pulseaudio daemon is no longer running. The only way to get sound back is to manually "Pulseaudio -D" or to reboot the system. This isn't just "a warcraft problem". It happens with Spotify (also under wine) Rthymbox, and VLC. A friend suggested I run the Pulseaudio daemon with a higher cpu importance? Is that sensible? Are there any pages where i can read up on how better to configure pulse? I have read lots of guides about linux sound problems and most seem to be about alsa not pulse.
My hardware info is included below:
Code:
arin@chrome:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALS4000 [Avance Logic ALS4000], device 0: ALS4000 DSP []
Subdevices: 1/1
Subdevice #0: subdevice #0
arin@chrome:~$ lspci -v
----snip ----
04:07.0 Multimedia audio controller: Avance Logic Inc. ALS4000 Audio Chipset
Subsystem: Avance Logic Inc. ALS4000 Audio Chipset
Flags: bus master, fast devsel, latency 64, IRQ 16
I/O ports at 9c00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ALS4000
Kernel modules: snd-als4000
When I start Audacious and make it play music, after a random time the player
freezes up and the music stops playing. I have to make Audacious force quit and restart it, then it works for some time again. When I play a ..... video (in Firefox), it plays fine for some time and then it loses sound and either continues playing silent or the video stops and doesn't start again until I reload the page.
I use kernel 2.6.31-11-rt and the soundcard is...
product: AC'97 Sound Controller
vendor: Silicon Integrated Systems [SiS]
physical id: 2.7
[Code]......
I just installed Ubuntu Netbook 10.10 on my new Asus Eee PC 1215T, and I'm having trouble getting Internet access. When I first start up or reboot the PC, I'll have network access, but not Internet access. I'm connecting via a WAN at my university, and so the first thing you have to do is "register" the computer on the network (by visiting a certain website on their intranet) before it will allow you to access the Internet. Takes about 3 minutes to register it. I have enough time to *begin* this registration process, but I've tried several times and I can't get all the way through it before I mysteriously lose all network access. Unfortunately this is a brand new machine and came without any OS installed, so there's no way I know of to test whether this is defective hardware or not.
View 1 Replies View RelatedI'm using Ubuntu 10.04 and after a recent software update, I found that my web browsers crash constantly. Firefox stays open for a few seconds and then dies and won't restart. Google Chrome keeps giving me the "Aw, Snap!" screen. Seamonkey and Epiphany run for a while and then crash. After some research, I uninstalled Flash, but that didn't change anything.On a possibly related note, I've been informed of disk errors during boot and prompted to fix them twice in the same two week period.
View 14 Replies View Related