Fedora :: Fedora 10 No Compiz - No Working NVIDIA-driver After Update
Jan 28, 2009
I have Fedora 10 installed. I've just made an update of my system. Things that were updated were a new kernel version with devel and also something with NVIDIA (which is my video card).
After restart of my system, compiz fusion no longer works.
I have a NVIDIA-Linux-x86-177.82-pkg1.run -file to manually install the NVIDIA-driver so the advanced features of Compiz can be utilized.
After install, the bootup screen tells me that loading the NVIDIA driver has failed. I also receive a WARNING-message.
View 14 Replies
ADVERTISEMENT
Jun 5, 2010
I have just upgraded to Fedora 13, and am trying to use the experimental Nvidia driver to enable Compiz desktop effects. The driver appears to be working correctly, but when I enable desktop effects, my text/icons/option menus are inverted (mirrored on both x and y axis's). Can anyone help me solve this issue? am i going to have to go to the proprietary Nvidia graphics driver?
View 8 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Mar 19, 2009
I have set this up before (ie installed the drivers and had them working perfectly) but had to do a system wide re-install of fedora. Since this clean install, I've had non-stop grief with nVidia drivers. They have been downloaded and installed via yum, and on start-up nvidia.ko loads. But from with gnome I cant gain access to any 'special effects' (ie desktop effects wont enable).
View 4 Replies
View Related
Oct 30, 2010
What it does is, if you do something to change anything on the screen, for example, highlighting text, or switching from one tab/menu in an application to another. The screen doesn't show the change. The only way to SEE the change is to do something else to the screen, like grabbing and moving the application around, or scrolling the page of a website, etc. If you don't do that, you won't see what's really on the screen, but rather what WAS on the screen.
Another example:
*) say you have an application open with 3 tabs: tab1, tab2, and tab3.
*) Switch from tab1 to tab2 and you see no change on the screen.
*) Switch from tab2 to tab3 and you see tab 2 on the screen, NOT tab 3.
*) Switch from tab3 to tab 2 and you see tab3 on the screen, and NOT tab2.
Or, if you're typing in this box to make a post, and you hit ctrl+a to select all, you see no change. If you click in the box to deselect all, then it looks like you've selected all text still. The only way to see what's currently on the screen is to scroll the text box or page just a bit, or, if you're using an application, then you'd have to move it around on the screen a bit.
As i've said, the nVidia drivers are installed and working, as well as compiz, etc.
Code:
[=v=]$ lspci
00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02)
00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B)
[Code]....
Also, i did BOTH the dracut thing, and the extra kernel paramter in the grub.conf. So, nouveau is blacklisted. Oddly enough though, i do NOT have this problem when using the nouveau driver...
Also, fwiw, i think that i should mention that i'm not using the "Desktop Settings > Enable Desktop Effects" method, because i always seem to have problems with getting certain features to work, like the background for the cube skydome, etc. How i do it is that i install a package called compiz-manager, and i have it set to run at session start. This makes all of the compiz features work fine. One thing that i've noticed though, is that on my other workstation, i haven't set that up yet, and it seems that is is NOT having the same issue. While compiz-manager was running, i tried to use the "desktop settings" method, and it crapped out and reverted back to the old school desktop. I then tried it again, and it reloaded compiz, and there is no screen update issues now. So it seems that you have to have both of them running in order to get all of the compiz options to work, and not have the screen refresh issue?
View 9 Replies
View Related
Mar 11, 2010
I updated my fedora 12 GNOME installation. Now Compiz fusion is not working. It says Accelerated 3D support not found. Though Nvidia drivers are already installed. Now I can't even ALT+TAB between open applications.
I tried "metacity -- replace" but then windows wore a weird look with only a minimize button. No sign of maximise & close buttons.
View 14 Replies
View Related
Dec 26, 2009
i ran yum update which updated kernel to 2.6.31.9.174.fc12.i686.PAE. Now after logging in i get a blank white screen. With previous kernel updates i have had no such problem. Anyway, the boot messages are following:
Quote:
checking for module nvidia.ko [FAILED]
nvidia.ko for kernel 2.6.31.9-174.fc12.i686.PAE was not found [WARNING]
The nvidia driver will not be enabled until one is found [WARNING]
Driver already disabled
I have a GF 6600 video card.
View 14 Replies
View Related
Jun 17, 2010
I read somewhere that when updating Fedora I might want ttemporarily disable userdefined repos like RPMfusion.I tried that with
Code:
yum upgrade --disablerepo=rpmfusion-free-updates
It updated, I rebooted, and now my nvidia driver is not found.
[code]...
View 2 Replies
View Related
Oct 30, 2010
a little while ago the file from nv stopped being able to run.. I cant update the driver and now always get this error
4: warning: comparison between signed and unsigned integer expressions
/tmp/selfgz2718/NVIDIA-Linux-x86_64-260.19.12/kernel/nv.c: In function �nv
_kern_read_registry�:
[code]....
View 2 Replies
View Related
Jun 21, 2011
Lately I tried to update my nvidia drivers from RPFMFusion repos. There was a new version 275 available, so I installed it. After a reboot I would repeatedly see the Nviia Logo followed by black followed by a glimpse at the CLI with some error message. This process continues over and over again and it is so fast that the only thing I could make out from the error message is the following:
at-spi-bus-laun[some-number] segfault at 980 ...
in libx11.so.6.3.0 ...
I tried completely removing the driver then updating my system (there were no updates) then booting with nouveau to see that that actually works. Then I tried reinstalling the nvidia driver following leigh's guide [URL]. Same error.
This is where I'm stuck at the moment. Booting to runlevel 3 I had a look into the messages and Xorg.0.log, but I didn't see anything. Maybe I can get the log files uploaded.
I will boot from live media and provide them later on.
Hardware specs:
Samsung P480
Intel corei3 330
nvidia GT330M 1024mb
8gb Ram
120gb SSD OZC Vertex 2 with /tmp mounted as tmpfs
Software specs:
Using F15 x64
kernel 2.6.38.8-32 (from the top of my head, please don't shoot me)
added repos:
RPMFusion
adobe (flash)
playonlinux
There is one addition I can make. Before, when I was using the 270 driver, I tried playing some games via wine and that also segfaulted on me (most of the time - 1 worked), so I think there is a general issue with the nvidia drivers on my system. But back then It was only wine, not X.
View 9 Replies
View Related
Oct 6, 2009
I had to have the Nvidia Driver build a module to my kernel. It goes through, says it was successful, but I an unable to start X and get this log:
Quote:
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.6.el5 i686
[code]....
Its an Nvidia 8200 integrated graphics card... Not sure if there is a wrong driver or the driver is in a different location then where Fedora is looking.
View 8 Replies
View Related
Oct 13, 2009
I have been running F11 for some time now. I install updates regularly and to this time have had no issues. Now it comes up with error.
Code:
[root@red 2305 ~]
$ yum update
Loaded plugins: protectbase, refresh-packagekit
0 packages excluded due to repository protections
Setting up Update Process
Resolving Dependencies
--> Running transaction check .....
--> xorg-x11-drv-nvidia conflicts with xorg-x11-drv-catalyst
Error: xorg-x11-drv-nvidia conflicts with xorg-x11-drv-catalyst
Error: xorg-x11-drv-catalyst conflicts with xorg-x11-drv-nvidia
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest
[root@red 2306 ~]
I do not believe that I even have the 'xorg-x11-drv-catalyst' mentioned here installed:
Code:
[root@red 2315 ~]
$ yum list all | grep installed | grep catalyst
[root@red 2316 ~]
This returns nothing so why the error?
View 5 Replies
View Related
Oct 29, 2010
I'm running Fedora 13 x64 and updated the kernel to the latest version (2.6.34.7-56 to 2.6.34.7-61). I use the proprietary nvidia drivers (currently 260.19.12) so I had to compile the kernel module against the new kernel sources and reinstall the driver. The process was apparently successful, but when I try to start X nothing happens, it's as if the computer had been suspended, my monitor acts like it isn't receiving any input. I have full runlevel 3 access, and the system seems pretty much fine up to that point. Nvidia's own sanity tests which are built into the installer reported no problems with my driver.
View 14 Replies
View Related
Nov 20, 2009
I used leighs post to install the nvidia driver for Fedora 12 and now plymouth does not work it uses the text theme. Right before it goes into the text theme I get this message:
"Unknown boot option `nouveau.modeset=0' : ignoring"
View 14 Replies
View Related
Feb 20, 2010
To use games and other intensive applications, but with the switch I completely lost control of the brightness for the monitor. Is their a way to configure that, through the terminal or external application. If not, is there an experimental 3d version of nouveau I could try. Help would be appreciated, everything else works great so far.
View 2 Replies
View Related
Oct 18, 2009
I seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
View 6 Replies
View Related
May 30, 2011
I am using the akmod nvidia driver and I have the option for "sync to vblank" checked, however when running minecraft my computer is still pulling 200+ fps and it's causing tearing like a beast.Is anyone else having this problem? I don't know if my drivers are corrupted, set up improperly, or if the driver is just broken.
View 1 Replies
View Related
Feb 5, 2009
I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
View 1 Replies
View Related
Jan 25, 2011
Ever since I upgraded my video driver (the proprietary NVIDIA drivers) to 270.18, I have been experiencing lag when typing and when using Compiz as my WM. I can work around both problems by switching the WM to Metacity, but obviously I don't want to continue using that. I have tried changing my Compiz settings but to little avail. If you want my OS and graphics card, the OS is Ubuntu 10.10 and the graphics card is a NVIDIA GT 330M.
View 1 Replies
View Related
Feb 13, 2011
A couple of issues with compiz. I'm setting up Debian Squeeze on a new-to-me laptop. Video card is nVidia Quadro FX 570M.
I installed the nVidia non-free driver, and that's working fine. Compiz starts up ok (I say "compiz --replace"). At least some of the effects are working, and the windows look normal.
First issue: as soon as I start Compiz, the number of workspaces goes from 4 to 2. And Workspace Switcher Preferences (the thing that pops up when you right-click the workspace switcher in the Gnome Panel) no longer shows the controls for changing the number of workspaces.
Is there is a way to change the no. of workspaces using gnome configuration editor? That might be a good workaround.
The second issue is, compizconfig-settings-manager will not run, whether Compiz is running or not. I don�t know if it would run before I installed the nVidia driver (Compiz wouldn't run so there was no reason to try CCSM). When I try to start it from the menu, I get the spinning cursor for several seconds, and that's all. When I say "ccsm" in a console...
Code:
I dont think the locale error is the problem. I get locale warnings all the time, like when I use apt-get, but it doesnt stop the program from running. But I could be wrong about that.
View 3 Replies
View Related
Jun 5, 2010
I cant run my compiz. After updating the nvidia driver (current) and rebooting, i got a menssage saying that X is not working properly.
Denis@denis-desktop:~$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
[Code]....
View 3 Replies
View Related
Aug 25, 2011
I have a geforce 8400GS and nvidia-current installed. However, the Additional Drivers app advises that "No proprietary drivers are in use on this system" and that the driver is activated but not in use. I know other people have complained about this problem, but for me this is breaking 3D content and I can't get compiz to work either. When I try to start compiz manually (compiz --replace), I get this error:
Code: compiz (code) - Fatal: Couldn't open display My Xorg has nvidia as device driver. I'm using the NVIDIA X Server settings program to setup my two monitors, so I know that this is what is in use. In addition to the compiz problem (which I can get over), sometimes I can see the desktop background through the active window. It's hard to explain so I'll take a screenshot when it happens again. Things I've tried:
1. Installing nvidia's latest drivers - The installer was extremely picky, constantly complaining about other modules and drivers. After I finally managed to remove everything it didn't like and install it, X wouldn't load.
2. Reinstall nvidia-current - tried multiple times with no change.
3. Link /usr/lib/xorg/modules/extensions/libglx.so to /usr/lib/nvidia-current/xorg/libglx.so.270.41.06 - didn't make a difference.
View 7 Replies
View Related
Dec 1, 2009
I'm a Karmic user, using a Nvidia Geforce 9500GT video Card.
I'm telling you about my GPU, because since I upgraded to the 190.42 Nvidia "official" new drivers, what's happening is:
My Compiz is no more able to save it's configuration across the sessions, and every time I close my PC or when I simply need to restart my active session, Compiz needs to be started again manually, It do not auto-activate by the compiz setting preferences.
Doing: System --> Preferences --> gnome-appearance-properties (TAB: "Visual effects") and click on "normal" checkbox, to activate the compiz visual effects.
Is there anyone able to teach me how to save the compiz activation, in order to avoid the manual, boring, repetitive, activation each time?
View 1 Replies
View Related
Sep 8, 2010
I have installed Debian Lenny and the Driver for an NvidiaCard GTX280. As this card is not supported by the debian-repositories, i have installed the driver from the nvida-Site. It works ok, but there's one thing: When i have compiz fusion activated, the caracters in the shell are sometimes hidden (pls see attachment).
View 4 Replies
View Related
Sep 1, 2011
I've just installed 100+meg of updates and rebooted only to find that when I login the desktop fails to boot. Opening a root-console, I killed Compiz which dropped me back to the login screen where I logged-in again with the desktop starting successfully. From there I disabled Compiz and have no problem starting the desktop now. But that's not really a solution.Even stranger, if I now try logging in with and older kernel version and with Compiz off - if I try enabling Compix now, the desktop just freezes - it also fails to complete loading the desktop. So both the current-kernel/Compiz seem to be linked to the problem in some way!Has anyone else experienced this, and is there a solution? I miss my desktop-effects!
View 2 Replies
View Related
Mar 13, 2010
My compiz is not working. I re-installed it, but since I have the newest version of Fed 12, compiz is dead.
View 3 Replies
View Related
Dec 10, 2009
I have finally managed to get the nvidia drivers for my dell vostro 1500 laptop
It has GeForce Nvidia 8400M GS graphics card.
I have installed them according to the guide given by Leigh123
[url]
Now that is done, i am not able to get the compiz working,i wanted to update to nvidia drivers as i wanted to get that fire and water effect, they are so cool, I came to know that it was beryl earlier but not beryl has been stopped and its compiz which has now taken over.
Fc12 comes with compiz in the live CD. System >> Preferences >> desktop effects >> check radio button compiz
The system freezes and then the bug reporting tool comes up. kindly let me know which log files to upload which may help you to determine the problem better.
View 4 Replies
View Related
May 11, 2010
After kernel branch update some times ago i found compiz very slowly, but with older branch compiz was not such slow as today.
Here is my uname:
Quote:
View 5 Replies
View Related
Jan 2, 2010
I recently upgraded Fedora 11 to Fedora 12. No problems. Tried to get fancy and add Compiz using a string I took from the fedora forum.
Now the system appears to be booting but then hangs with the cursor in the corner. I am able to get to a virtual terminal (Ctl-Alt-F3)and examined the /etc/X11/xorg.conf.
I believe it is looking for an "nVidia.ko" file. I am not able determine what to do to get back to normal.
Attempted to rename the xorg.conf file but it didn't help. Not really sure that is what the problem is but I tried running startx and it mentions that file as a problem.
Any steps I should be trying to get back to the regular GUI desktop?
View 3 Replies
View Related
Jan 8, 2010
I just installed the latest compiz as per leigh's instructions - nice, easy install!I notice that the snow application is missing. That was my favorite, but where has it gone??
How about floating windows above desktop cube? Dodge? In which upon selecting a window, the non-selected windows move around it to move it to the front.I also notice that many window updates are very poor. For example, in the compiz settings manager when I switch tabs, the window does not actually update unless I move it. I click on a tab and it looks just like the previous tab. If I move the mouse around, it will update the wind in blocks under the mouse, but not the whole window.And, it would appear that the standard compiz is still available from my desktop settings in KDE. Could I have failed to remove the original compiz?
View 8 Replies
View Related
