Ubuntu Multimedia :: Sound Dies After A Random Time Of Playback
Jan 27, 2011
When I start Audacious and make it play music, after a random time the player
freezes up and the music stops playing. I have to make Audacious force quit and restart it, then it works for some time again. When I play a ..... video (in Firefox), it plays fine for some time and then it loses sound and either continues playing silent or the video stops and doesn't start again until I reload the page.
I use kernel 2.6.31-11-rt and the soundcard is...
product: AC'97 Sound Controller
vendor: Silicon Integrated Systems [SiS]
physical id: 2.7
[Code]......
View 1 Replies
ADVERTISEMENT
Jul 17, 2010
When I play videos in VLC, the video output seems to randomly freeze while playing the video. This does not effect the audio though. The audio output continues, but with the video frozen on a frame. This is happening in windowed and full-screen mode. I have to use "pkill vlc" each time twice then start VLC again. I have had to resort to mplayer for the time being. I am running squeeze. I was not experiencing this problem before though (started within the past week), so it must be due to some recent upgrade. I have tried "aptitude purge vlc && aptitude install vlc", but I am still experiencing the same problem.
View 1 Replies
View Related
Jun 5, 2010
Suse 11.2 - KDE 4.3.5. I have only one sound card. The only Pulse software that is installed is libpulse0 and libxine1-pulse. All sound applications work. Amarok, vlc, kaffeine, Skype etc. But then every say 6th. or 7th. boot the sound dies. On everything. Even the startup melody. When I go to Yast>Hardware>Sound everything looks in order but the test on the card makes no sound. But if I delete the active card then re-enable it everything works again.
I saved the working /etc files as *.works and ran the following script...
The only difference was a slight volume difference in asound.state (23 vs 27).
I thought I might try to diagnose it by doing a file search for file changes in the last 5 minutes immediately after I run the Yast re-enable.
View 9 Replies
View Related
Jun 11, 2010
I have to say I'm really enjoying it. However, when I have been watching videos on ..... and revision3.com after a random amount of time the computer will freeze up and I have to do a hard restart of the computer.I've gone through the multimedia sticky post at the top of these forums with no real luck.Oh just got the computer today as a real budget system.AMD Athlon II X3 435 2.9ghzMSI K9N2GM-FD AM2+on board NVIDIA Geforce 82004GB DDR2 memoryI'm using ubuntu 10.04 64bit version.
View 4 Replies
View Related
Feb 14, 2010
Is there any way to make Ubuntu play sound like Windows 7? I mean when i, for example, listen to music in Windows 7 the sound is much clearer and besides that i can use room correction to obtain a better surround feeling, but when i listen to music in Ubuntu the sound is not very clear and it sounds like stereo even though the sound is played back through all the speakers (the bass is also a little bit to high).
So far i've tried installing the alsa driver and modifying the output levels of each channel, but didn't quite have the same result as the room correction feature in Windows, and the sound wasn't any clearer either. Note: I have an onboard Realtek soundcard and Logitech x530 speakers
View 9 Replies
View Related
May 17, 2010
So I recently upgraded from 9.04 to 9.10 and then to 10.04, and I love it!
But there's only one key problem -- sound playback.
When I'm playing an mp3 file in rhythmbox, or any other player, it'll skip when I maximize or minimize windows, or do anything that really uses resources.
And on top of that, if I just let it keep going, it'll eventually just stop playing the song, and the progress bar will jump forward and do the same for other songs, not even playing them.
even songs on pandora.com skip, but don't stop playing
I've deduced that it's probably a sound driver thing. I've downloaded the driver for my card, but I the directions tell me to install it in
/usr/src/linux/driver/sound
View 3 Replies
View Related
Feb 12, 2011
I installed opensuse 11.3 KDE for the first time last week. Amarok works fine with mp3 files. Also I installed VLC and kaffiene with all available codecs but unfortunately I have no sound in my avi movies. I can not know what is the reason although it was working fine in windows.
View 3 Replies
View Related
Feb 28, 2011
how poor is sound playback in Ubuntu? I don't know if this is a general problem in all distros, but as a beginner i decided to install Ubuntu as its popular for users with minimalistic or not much knowledge about Linux at all. So in Windows playback sound quality is great, but in Ubuntu it is terrible, why is that? My soundcard is motherboard integrated - Asus M4A77TD PRO. In other forums someone give me advice to write this
[Code]....
View 8 Replies
View Related
Dec 23, 2009
I have some videos on my harddrive. In most of them the sound just stutters for a short while and then they work fine. But others the stuttering seems to go on. I must admit I didn't have the guts to check the whole videos...Its kind of torture to watch a full length music video with stuttering sound... Man...I'm asking so many questions here I'm starting to get ashamed of myself
View 6 Replies
View Related
Apr 25, 2010
1 i have tried to get my sound output working in totem kaffiene and banshee to no avail. reading through several blogs posts and the such of likes has gotten me to ttry and set pulse alsa and oss so im even more confused. i can get a sound test to play but cannot get music to work??
2 i would really like to use audacity to record but it keeps hanging after about three seconds. i purchased a new acer aspire 5532 and deleted windows 7 to encounter
View 6 Replies
View Related
Nov 7, 2010
All Java apps online have random, garbled sound.
i do have the real Java, not icedtea.code...
View 2 Replies
View Related
Feb 12, 2010
i'm using ubuntu since 8.04, and the current (9.10) is a fresh install on new hdd.the problem was the same each version (8.04, 8.10, 9.04, 9.10) - while i'm playing the video (no matter if i use mplayer [smplayer], gstreamer [totem] or adobe flash plugin [videos]) the playback freezes randomly for about 5-10 sec. during the freeze the movie is still played, i can hear the sound is ok. if i press [space] in smplayer it pauses the playback, so the responses for keyboard actions are ok. not for the mouse clicks however. i can still move the cursor around the screen but it seems the system is not aware of it (clicking on the "pause" button doesnt pause the movie). except the cursor, nothing changes on the screen (if the im [pidgin] window was blinking because of new message, it freezes etc etc).
is there any kind of log i could look into just to try figuring out the problem?it is impossible to watch any movie on my pc (currently i don't have tv)i installed windows on external hdd once and it played videos fine so i suppose it's not hardware problem .
View 3 Replies
View Related
Nov 17, 2010
I am new to this forum and have recently switched to Ubuntu. The OS installed without a hitch and was able to get video card, wireless internet installed with relative ease. However, I have encountered a problem installing my E-mu 0404 PCI sound card via the ALSA packages in Synaptic.
Code: 04:03.0 Multimedia audio controller [0401]: Creative Labs SB0400 Audigy2 Value [1102:0008] As you can see once the packages were installed the OS could see the hardware ok, but when I tried playing a standard MP3 file (16 bit, 44.1khz, 192kbps) in Totem it started playing the file back around 15-20% faster than normal? To me it sounds as if the software is playing the audio back at higher sample rate than 44.1khz hence the faster speed, though I'm not 100% on that.
The next thing I tried was playing the same file back in VLC and it was exactly the same (15-20% too fast), but this time it was horrible and glitchy as well, almost as if the audio buffer size was set to small. The same thing happened when I tried playing back some flac and wav files (all 16 bit, 44.1khz) also. I have searched google (and read the comprehensive sound card guide on this forum) and read several forums, guides, etc. for anybody posting the same issue with this particular card but could find nothing. From all reports I've read this card should work fine under ALSA. For the record I'm using Ubuntu 10.10 64bit kernel running on a Dell Dimension 9200 (Intel Core2Duo E6400 2.13ghz) with 2GB RAM.
View 9 Replies
View Related
Sep 24, 2010
I don't want to 'spam', (I had started a first thread about this some time ago), but I'm (still) experiencing problems with my internet: I can use the internet (I am connected through a simple switch) for some time, that is: surf the internet (in firefox) and download using vuze (azureus) but after some time, the internet connection 'dies' (downloadspeeds jump to 0b/s and I am not able to surf to any site in firefox). When that happens, the only 'solution' to this is restarting my pc.
I first experienced this when using ubuntu 10.04, so I thought that it was a 10.04 issue. I knew that when I had ubuntu 9.10 (karmic koala) installed, this didn't happen. So today, I installed karmic koala, but much to my surprise I am experiencing the same problem. I used 'lspci' to find out what NIC is in my pc and I found out I have the following NIC: 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78 ) I'm suspecting the NIC to be the problem. Is this probable? If so, I want to buy a add-in network card (simple one, not a gigabit card)
View 6 Replies
View Related
Feb 22, 2011
I am having some trouble with my opensuse 11.3 internet connection for two weeks. After a certain period connection drops while using both NetworkManager and ifup. For info, I write the outputs of some codes.
[Code]...
View 2 Replies
View Related
Jan 19, 2010
I'm looking for a script that copies a random .jpg from a random folder in my ~/Pictures folder to my ~/temp folder with a standard filename. This file will then be displayed in Conky. I can fix the last part, but I cannot find a way to do the first part.
View 3 Replies
View Related
Oct 17, 2010
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
View 1 Replies
View Related
Mar 8, 2011
Am trying to set up a new system but am getting some strange behavoir. I've administered an Irix system before. I have opensuse 11.3 installed with gnome running. When i enter a bad user id in the windows login screen, the bad authentication causes the x window manager to crash and leaves the system in the ascii terminal mode login. I then have to login as root and do an init 3 , then init 5 to get the x server started again an get the windows login started. Has any one seen this behavior before and how can i fix this. Been hunting through /etc/X11/xdm to see what startup scripts could be causing this.
View 2 Replies
View Related
Apr 15, 2010
When I try to playback a sound file in aucadity just after having played one in rhythmbox or totem or vlc (or presumably any other media player), I get the following message :
"Error while opening sound device. Please check the output device settings and the project sample rate."
When I try again 2 or 3 seconds later, playback works fine. In fact if I wait 2 or 3 seconds after having stopped playback in rhythmbox or totem before starting playback in audacity, audacity doesn't give me the error message at all. Just wondering what causes this delay (as there are no delays when I go from rhythmbox to totem or vlc or anything else).
View 1 Replies
View Related
Jul 19, 2010
When I talk to anybody on Skype, the sound is really slow, it sounds like I am a robot. Its running at maybe 1/2 normal speed. I am using Xine backend and internal microphone.
[Code]....
View 5 Replies
View Related
May 17, 2010
Its unbelivable how crappy Sound in Ubuntu is - i am suffering from this since karmic. Whenever a second appication like Firefox plys a tune my sound in Amarok dies. Even windows 3.1 was able to do this kind of Multitasking and afaik this also was possible WITHOUT this Pulseaudio desaster.
This is my config
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 1/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 0: SB [HDA ATI SB], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
(1)ch90045@cyclops:$~/cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.21.
This sound desaster makes me really think of buying a windows 7 license.
View 2 Replies
View Related
May 30, 2010
Only one program can use sound at a time? Any fix?
View 2 Replies
View Related
Aug 19, 2010
i cannot play sound at same time... example i use twinkle and when i play music twinkle error occur:
Critical: Cannot open ALSA driver for PCM playback: Device or resource busy
what can i do ?
View 1 Replies
View Related
Dec 1, 2009
Recently installed 11.2x64 with KDE4.
Everything is working great (excellent release!) with the exception of sound.
The sound works well when only one app needs it, but sound only works for one app. If another program is open, it has no sound.
Some examples: - If I am listening to an .mp3 with VLC, I don't get sound in a movie in SMplayer.
- If I have a tab open in firefox with a flash movie (like .....), any other firefox tab will have no sound.
The worst part is that if I have virtualbox open, no other applications have any sound as long as it is open.
View 9 Replies
View Related
Jan 29, 2010
with my motherboard the onboard back sound jack's audio is VERY quiet, but the front jacks wired into HD audio work fine. (I'm building an htpc, btw.)
I tried for weeks to get it to work, but eventually I just pulled a cheap Dynex DX-SC51 card from another machine and turns out it works, but now I can't use the inputs and headphone jack on the front of the case without going into system>preferences>sound and changing "output" back to "internal analog audio stereo"
Is there any way to activate these two audio devices at the same time?
View 1 Replies
View Related
Aug 24, 2010
I have a problem with my 64-bit version of Debian Linux Lenny. I have to run alsaconf every time I boot into the machine. I have tried to run this command followed by alsaclt store. It was no help, I still have to run the command every time to get sound, which makes it very annoying. Anybody know what configuration file I should be looking at, and what I should be changing. If you need a print out of any of my configuration files, just let me know what they are and where they are and I will post them. The sound was working fine for the longest time before, I think the whole mess started when installed KDE, E16, XFCE etc. I was trying out these new windows managers and seeing if I would like them. I don't really like them all that much as the gnome so I removed them.
View 6 Replies
View Related
Sep 3, 2010
I done searches for "clock" and found similar threads, but no real fix that is working for me. My clock resets when I boot into linux. It does not happen in windows or bios even on cold boots. The battery is replaced and good** the old battery was by all measures dead (0.6v), but still seemed to have enough power for the clock, since windows tested fine with it.
I have tryed setting it to local time, UTC.. etc... My timezone is GMT (london). "sudo /sbin/hwclock --systohc" Although I have windows, I do not use it except the few times to test this, so no conflict.
View 9 Replies
View Related
Jun 28, 2010
I know there already a LOT of posts on the forum about pulse audio. I had some problems upgrading from Karmic to lucid, Pulse just kinda dies, but I left it be. Recently I brought a fresh 1TB hard disk and decided it was time for a clean install of 10.04 to fix that. I am running of a clean install, only additional packages I have pulled down are the Nvidia driver, wine, and VLC.. the rest is 'out of the box' config. Have tried reinstalling 3 or 4 times, I get the same sound problem each time. Pulse works fine to start with, I can play music, play warcraft under wine with sound.
However as time goes on I find that the pulseaudio process takes up more and more cpu time. Eventually it hits about 90% plus then crashes out. The system hangs for a minute, then resumes with no sound. When I run "top" the pulseaudio daemon is no longer running. The only way to get sound back is to manually "Pulseaudio -D" or to reboot the system. This isn't just "a warcraft problem". It happens with Spotify (also under wine) Rthymbox, and VLC. A friend suggested I run the Pulseaudio daemon with a higher cpu importance? Is that sensible? Are there any pages where i can read up on how better to configure pulse? I have read lots of guides about linux sound problems and most seem to be about alsa not pulse.
My hardware info is included below:
Code:
arin@chrome:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALS4000 [Avance Logic ALS4000], device 0: ALS4000 DSP []
Subdevices: 1/1
Subdevice #0: subdevice #0
arin@chrome:~$ lspci -v
----snip ----
04:07.0 Multimedia audio controller: Avance Logic Inc. ALS4000 Audio Chipset
Subsystem: Avance Logic Inc. ALS4000 Audio Chipset
Flags: bus master, fast devsel, latency 64, IRQ 16
I/O ports at 9c00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ALS4000
Kernel modules: snd-als4000
View 1 Replies
View Related
Sep 16, 2015
I have strange problem with my wireless connection. When I boot my computer, I can connect to my wireless network normally. After a random time between 2 and 20 minutes, I am disconnect and cannot reconnect to any wireless network I have no problems in Windows and Android.
I use the broadcom-sta-dkms driver and the power management is disabled.
uname -a
Code: Select allLinux aurelien-debian 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux
lspci -nnv | grep Network
Code: Select all08:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
When work:
wlist wlan0 scan
Code: Select allwlan0 Scan completed :
Cell 01 - Address: 2E:DF:C3:40:66:D0
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=53/70 Signal level=-57 dBm
Encryption key:on
[Code] ....
When don't work:
iwlist wlan0 scan
Code: Select allwlan0 Interface doesn't support scanning : Invalid argument
dmesg
Code: Select all[ 3337.554734] ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
ifconfig wlan0
Code: Select all
[Code] ....
View 0 Replies
View Related
Apr 6, 2011
It is all good and running except for the sound.
I run: Centos 5.5 Final, kernel 2.6.18-194.32.1.e15
The sound card is an onboard one for Gigabyte X58A series. the driver is recognised as "Intel corporation-82801JI (ICH10 Family) HD audio controller" and the module "snd-hda-intel".
When I put the PCM device on "ALC889 analog" I can hear the test sound in the "audio configuration module" from the system/administrative menu.
However, when I run a movie or an mp3 file, I can see the picture, but no sound. I also can't hear the test sound under "Systems/Prefernces/ Sound " Menu.
This runs fine under windows though I have to configure numerous output plugs through a gigabyte-realtek software.
View 3 Replies
View Related
