Ubuntu :: X Dies Randomly / Screen Goes Blank And Will Not Display Anything?
Mar 17, 2010
I am running 9.10 on a HP Compaq. Every few days X will die. The screen goes blank and will not display anything. I have to SSH in, but even trying various commands like gdm restart does not help. I eventually have to reboot the box. Below is a snippet (hopefully not too large) of dmesg:
/dev/sr0 on /media/cdrom0 is a CDROM, but I dont think thats the issue.
[707515.629800] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[707515.629806] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[707515.629811] Info fld=0x45d18, ILI
[707515.629813] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
code....
View 3 Replies
ADVERTISEMENT
May 30, 2010
I am browsing or chatting with someone or doing whatever, and the screen will randomly go black and the sound will be cut off as well. The computer doesn't shut off, it's not in Suspend mode. All processes are still running when this happens. And it doesn't come back.
View 1 Replies
View Related
Sep 12, 2010
I have just installed 10.04 x86 for my mom and while she is using it (tyrannically just browsing facebook/email/flash games) the screen randomly goes blank then back to normal again. This symptom generally worsens after a few minutes until it is unusable. Specs are as follows:
Athlon X2 5200+
3GB RAM
ATi 2400pro 256MB (using the standard out of the box drivers)
Also running compiz and emerald so that I was able to make the desktop look like OS X.
View 5 Replies
View Related
Sep 21, 2010
Whenever I use Ubuntu, the internet seemingly dies out randomly. It never does this for windows 7. Could it be the router coincidentally dying, or is it a problem with Ubuntu?
View 2 Replies
View Related
Jan 11, 2011
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies
View Related
Feb 10, 2011
I went to lock the screen when I got up from my computer. I came back and there was a black screen. I tried hitting different buttons nothing worked. I rebooted and still went right to black screen. I can get into recovery mode but I can't figure out what's wrong with the computer. Can someone give me a hint. My father is very good with ubuntu but he said that he would just reload the os on it. But I really don't want to go thru that process all over again.
View 2 Replies
View Related
Jan 1, 2011
Why is it on Ubuntu/Maverick that my display insists on going BLANK after a certain period of computer inactivity EVEN THOUGH I have NO screensaver functions set and the put screen to sleep function in power management is set to NEVER and ALL functions in BIOS are all set to not have display go into suspend mode ?
View 2 Replies
View Related
Aug 16, 2010
I just upgraded to Ubuntu 10.04 LTS from 9.10. After the upgrade process, I restarted and chose "Ubuntu, with [the current kernel]" and now I am greeted with a white screen with no login or boot splash. My processor is pegged according to the processor case light. My computer's specs are as follows: AMD Athlon X2 5200+, ATI Radeon X1300 Pro, 2GB DDR2 ram, Dell Socket AM2 Motherboard, and 250 GB 7200 RPM hard drive. I really need to get this computer to work.
View 7 Replies
View Related
Mar 19, 2011
i just installed opensuse yesterday and it's very nice. i wanted to install the driver for my ati mobility radeon hd 5470, so i followed the steps on:SDB:ATI drivers - openSUSEunfortunately, after the reboot, opensuse had booted but there was nothing on my screen (basically, just a blank screen)
View 7 Replies
View Related
Apr 4, 2011
i just installed opensuse 11.4 on my system(gigabyte 7n400pro2,amd athlon xp 2.8ghz,ocz vertex2 ssd,ati radeon x1550) and i have this strange problem: the screen gets blank(for about a second) every 40-50seconds. everything else works fine.
View 5 Replies
View Related
Jan 20, 2011
I have installed fedora 10 successfully but when reboot the system after installation not initrd or vmlinuz load and display first blue screen and some processing show after this blank screen display and held the system please tell me what should I do? I have reinstall many times but the problem is same.
View 3 Replies
View Related
Apr 19, 2011
I just installed Linux 5.5 on a Toshiba laptopn (i3, 64 bit). Centos runs until it reaches a very dark screen. On a few occasions, I am able to see something but the screen is very dark.
View 1 Replies
View Related
Nov 19, 2009
Just finished wiping and re-installing F12 From a DVD on an Dell Inspiron 9300 with a NV 6800. The NVidia site driver refused to install, so I used the method documented here
[Code]...
as instructed to in the sticky. On rebooting, after the load animation, the screen goes blank/black. If I click around, I can hear some beeps from the OS so I assume that things are running but i just can't see anything.
View 5 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Mar 8, 2011
Am trying to set up a new system but am getting some strange behavoir. I've administered an Irix system before. I have opensuse 11.3 installed with gnome running. When i enter a bad user id in the windows login screen, the bad authentication causes the x window manager to crash and leaves the system in the ascii terminal mode login. I then have to login as root and do an init 3 , then init 5 to get the x server started again an get the windows login started. Has any one seen this behavior before and how can i fix this. Been hunting through /etc/X11/xdm to see what startup scripts could be causing this.
View 2 Replies
View Related
Jan 28, 2010
After updating to 9.10 NBR on my MSI U90 it behaves like pressing the function keys "increase brightness" and "decrease brightness" continuously, including show the appropriate pop up.
I guess it is related to power management because it mainly happens while on battery.
How can I get rid of this problem?
View 3 Replies
View Related
May 17, 2010
When i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
View 9 Replies
View Related
Dec 26, 2015
I recently installed Debian 8.2.0 on an older machine (circa 2008, AMD Athlon Dual Core 5000B Processor, Nvidia nforce MCP61P Chipset, Nvidia Geforce 6150SE nForce 430 onboard video).
The install went smoothly, but occasionally the screen scrambles (see example below)
I have to force restart every time this occurs, and I'm not entirely sure what causes it. It used to only happen if I launched iceweasel too soon after login, but now it happens at any random time (in the middle of doing an image search, or right at the end of a 6 hour work session without any hiccups. I have only found topics on "screen blanking", and similar issues when using brightness controls on laptops, but nothing specifically like this.
View 9 Replies
View Related
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
View Related
May 9, 2010
I recently installed Ubuntu on my Powerbook G4 1.6ghz 13". The install went fine along with the first boot off the harddrive. The problem came when I started the computer for the second time. X starts but the display comes up blank. To be sure I didn't mess up the install I reinstalled Ubuntu and installed all the updates and proprietary drivers as well as setup remote desktop options. I can now start the computer and get a remote desktop but nothing on the computer's display. I've tried to edit the xorg.conf but X has not created one. I'm at a loss of what to try next.
View 9 Replies
View Related
Jan 26, 2011
The day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
View 4 Replies
View Related
Oct 9, 2010
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
View 1 Replies
View Related
Jan 14, 2011
I fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.
View 4 Replies
View Related
Apr 15, 2011
like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
View 1 Replies
View Related
May 13, 2011
This issue was resolved in Lucid and Maverick; now it's back... This happens after only 2-3 minutes, even when the screen saver is set to activate after 20 minutes. I believe this has something to do with ACPI power management.
View 2 Replies
View Related
Dec 22, 2010
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
View 7 Replies
View Related
May 4, 2011
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
View 2 Replies
View Related
Mar 16, 2011
All of sudden my Fedora 14 machine went to blank screen during startupprocess. I upgraded from 12 to 13 and then 14 last week and it worked fine for a week. I have Dell Optiplex 760 with builtin Intel Q43 video card. I have looked for the solution online, but it seems like it is driver issue. I couldn't find the compatible driver yet.
View 5 Replies
View Related
Apr 3, 2010
Today, just hurry the boot process up a few seconds, I manually selected the kernel to boot to. Everything went well and got to the point where I heard the bootup sound and then the screen went blank and my monitor on-switch went orange - indicating nothing to display.
If I pressed the delete key I could hear the sound made when there's nothing more to delete. I switched to one of the virtual terminals and the monitor switch went green but no display.
I rebooted and let the bootup process as normal and everything was OK. I repeated the initial bootup process, with the manual selection, and it went blank again. The odd thing is, I'm sure I've recently done this before and all was fine.
View 6 Replies
View Related
Apr 16, 2009
Computer: Dual AMD 280 Processors, Tyan Thunder K8WE S2895 Motherboard, 8x 2GB DIMMs.
Installed Fedora 10 86x64 from ISO burned to a DVD. Installation went ok, and computer needed to be rebooted at the end of the installation. Upon restart, Fedora 10 loaded to initial setup screen where user name, date, time, etc are set. At the end, as this is a stand-alone computer, the setup requests to send data of computer setup to Fedora.org and this request has to be denied. Pressing the Finish button ends up killing the system. The system doesn't reboot, what does happen is that the screen goes to black, and no signal is given to the monitor; the system hangs at this state. I've tried to see if giving the setup the ability to send the system data would change the end state upon pressing Finish, but nothing changes.
View 1 Replies
View Related
