I installed 10.04 Server. Then I did an apt-get install Ubuntu-desktop. The display is black. The monitor is receiving no signal (amber led). I believe that the install has stopped, but what am I supposed to do.?
View 1 Replies
Am trying to set up a new system but am getting some strange behavoir. I've administered an Irix system before. I have opensuse 11.3 installed with gnome running. When i enter a bad user id in the windows login screen, the bad authentication causes the x window manager to crash and leaves the system in the ascii terminal mode login. I then have to login as root and do an init 3 , then init 5 to get the x server started again an get the windows login started. Has any one seen this behavior before and how can i fix this. Been hunting through /etc/X11/xdm to see what startup scripts could be causing this.
View 2 Replies View RelatedAfter installing (not upgrading) Ubuntu 10.04 official release, there is a problem with skype latest version. Sometime Skype dies, and it is impossible to restart it (only killall -9, and then launching), if im trying quit all skype windows turning gray and thats all. Messages that are sending to others are not sent, and also opponents can't send messages to me. It was OK with same skype version in ubuntu 9.10.
View 3 Replies View RelatedComputer: Dual AMD 280 Processors, Tyan Thunder K8WE S2895 Motherboard, 8x 2GB DIMMs.
Installed Fedora 10 86x64 from ISO burned to a DVD. Installation went ok, and computer needed to be rebooted at the end of the installation. Upon restart, Fedora 10 loaded to initial setup screen where user name, date, time, etc are set. At the end, as this is a stand-alone computer, the setup requests to send data of computer setup to Fedora.org and this request has to be denied. Pressing the Finish button ends up killing the system. The system doesn't reboot, what does happen is that the screen goes to black, and no signal is given to the monitor; the system hangs at this state. I've tried to see if giving the setup the ability to send the system data would change the end state upon pressing Finish, but nothing changes.
I installed Kubuntu-Desktop on Ubuntu & now my Ubuntu installation is on the 2nd (data)partition! It's hard to believe but I'm looking at it from a live cd and that's what looks like happened.For right now, my main goal is to get Ubuntu back.Should I make the 2nd partition bootable so I have a dual-boot option at startup? Should I make the 2nd partition bootable & not the first? Can I uninstall Kubuntu somehow & have things return to how they were?I thought I was just loading an alternative sassion to Gnome.I thought that the only thing I said yes to was to use the KDE boot manager (or whatever).
View 8 Replies View RelatedI downloaded and mounted debian-8.2.0-amd64-netinst.iso on my work machine's VirtualBox v5.0.12 to check out Debian stable/Jessie's installer and clean installation in case I need to do it soon. I like the new installer compared to 11/24/2011 on my old desktop machine. It is much nicer, fancier with its advanced options, etc.
However, I ran into issues with its "Select and Install" part when I selected desktop managers (e.g., KDE and Gnome) and continued. It failed as shown in [URL] .... images. Why? I tried again from scratch and same thing. If I don't select any and just select non-GUI stuff (e.g, SSH and standard system utilities), then it works but I want the pretty GUI stuff.
I just received a band new DELL laptop with a blank disk and installed Kubuntu Lucid Alternate 64 on it. No problem during install (the only option I specified was for an encrypted LVM), but when I try to boot all I can see are colored lines scrolling/blinking on the screen. If I press any key it changes to white text (unreadable) scrolling/blinking.
If I press a key during the boot and get into grub, I cannot edit the boot options, cannot go to command line, cannot use MemTest86 (maybe because the partition is encrypted). Booting with the recovery mode shows the same lines. Edit: if I try to boot with the standard LiveCD, I get the same mess, so it's abviously a video card problem. Damn, I had checked beforehand that Ubuntu could run smoothly on it.
My issue is after having good video during installation of 11.4 Opensuse, I have bad video after installation. When 11.4 restarts I have an unreadable video pattern which renders the rest of the installation useless. It's strange that 11.4 loads the images at boot and installs with good video, but an unreadable video after installation. My previous installations of 11.4 have been flawless. On this system I'm using a Biostar MCP61 system board, AMD Athlon CPU dual core 64, on-board video(Nvidia), 1 TB hard drive, and an analog Viewsonic VA721 17inch LCD monitor.
I had Opensuse 11.1 running well on this system before I attempted an upgrade to 11.4. I tried, at initial install of 11.4, to adjust the resolution down to 1024*768 which had no effect on the installation. Then I entered "vga=0x31a" as a booting command at initial install with no good effect. After several install attempts with different configs I still get no viewable image on the display.
Lucid installed without any errors that I can see of off the main i386 installation CD, but after booting I get no display. Even in recovery mode. The monitor doesn't go into sleep mode and I can tell that the OS is actually running the background because I can do a Ctrl-Alt-Del and do a proper shutdown. I'm running an nvidia GT 9500. Everything is working fine on Karmic.
View 4 Replies View RelatedAfter a fresh install of debian 5.05 over net it boots then at end of text lcd screen shows out of range. if start in single user then startx it goes out oif range. How can i set it to a range monitor can do?
View 4 Replies View RelatedI am a perfect linux noob user, i have an ati 5750 card, so when i try to install opensuse 11.3 KDE, i click "install" i see a loading then just a black screen with the monitors led blinking, i had this issue before with kubuntu, but i find on forums that i have to use command : xforcevesa, and it worked, i don"t know similar command for opensuse. i am switching to opensuse cause i had some problems with Kubuntu. note that i tried all options in installation's menu, no acpi, vesa, low resolution......
View 3 Replies View RelatedWhen I ran the distribution upgrade from 9.04 in update manager, my screen went blank on reboot and will not recover. Every time I reboot, screen goes blank. I cannot press CTRL-ALT F1 - F6 to gain access to text shells.
I tested booting from the 9.04 live CD and it works fine. So I downloaded the 9.10 live cd on another computer and booted it on the disabled system. Same exact problem on the live CD that I had upon installation: on boot screen goes black and cannot access text shells.
What can I do next to get out of this short of going back to 9.04, which has problems that I do not want to live with?
I have a Gigabyte 6A-M61P-S3 with an nVidia chipset, and I'm using the built-in graphics rather than a discrete graphics card. Ubuntu 10.10 and previous releases ran flawlessly on it using the nouveau drivers. I tried doing an upgrade to 11.04 using the Alternate AMD-64 CD, and it seemed to complete successfully, but when it came time to reboot, I had no video output at all after the BIOS screen. This is a test machine, so I went ahead and did a clean install using encrypted LVM with the Alternate AMD-64 CD after confirming that 64-bit 11.04 ran fine using the Live CD.
The installation went fine, but the first reboot flashed a brief "error: no video mode activated" and then I lost all video output. Subsequent reboots didn't give me any error message, but I had no video output. I suspect there are some boot parameters that would have gotten the nouveau driver working, but I wanted to try Unity, so I rebooted to get the Grub menu, chose Recover Mode, selected failsafe graphics, and got to the Desktop, then installed the proprietary nVidia driver (current) and once I rebooted everything was golden.
I just installed Ubuntu 10.10 and on first boot I get these errors. Quote:Could not update ICEauthority file /home/username/.ICEauthorityQuote:There is a problem with the configuration server. (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 256)Quote:Nautilus could not create the following required folders: /home/username/Desktop, /home/username/.nautilusBefore running nautilus, please create these folders or set permissions such that Nautilus can create them.
View 3 Replies View RelatedA friend gave me an old desktop with an old version of windows. I was interested in "checking out" Ubuntu server. It installed without any problem. I added a desktop just to see how it worked. I know that is not something for a server, just messing around. Next I wanted to checkout Ubuntu desktop. I rebooted with the CD in the drive and it started to run. The pick your language screen appeared. Next was the option on what to install. I picked to install the desktop. I did not care if the server was overwritten. The word "Ubuntu" was in the center of a black screen with five dots under it. They would change from white to red to show something was taking place. The only problem was after about 5 minutes the CD drive would stop as if the computer was locked up. After removing the CD from the drive and rebooting the computer went back to loading the server version and the small desktop.
I guess the question would be: Does the Desktop version require a newer computer than what the server versions needs? Is that why I can not get it to install the desktop version (10.10)? Would the removal of the server version with a drive format (if I can find a format program) fix the problem?
I was using F11 when my Nvidia 6500 broke. I got a 9400GT but now F11 won't work.When I try the default option: after the media test, the mouse cursor appears and then nothing happens.If I try the second option "using generic video drive" anaconda crashes after I choose my keyboard layout.The Live CD and preupgrade didn't work either.F10 installs perfectly.
View 1 Replies View Relatedhow do you install an nVidia video driver?
View 1 Replies View RelatedThe nouveau driver coming with the free fedora does not even allow to run Gnome 3, so I'd like to install the Nvidia driver. So far I did not succeed as the nouveau kernel module is loaded at an early stage. How can I remove the nouveau driver?
View 6 Replies View RelatedHow much video memory will I need to install Fedora 15 with gnome 3.I have an Ati Radeon Hd 4250 with 256 mb of memory.
View 14 Replies View RelatedI installed Lubuntu 10.04 yesterday (yay, my first serious installation!), and I was trying to install the drivers for my video card (GeForce 6200), when it told me that it couldn't use ld. After oing some research I found out that it was in binutils. So I went over and got it and tried to ./configure it when it told me that there weren't any C compilers in $PATH, so I went over to the gcc homepage with a fine-toothed comb and found gcc 4.5.0. When I tried to./configure it, it also told me that there aren't any C compilers in $PATH.
View 4 Replies View Relatedwant to ask how to install kde (not kubuntu-desktop) in ubuntu 9.10
View 6 Replies View RelatedI recently had to get a new PC, I am left with one that while it doesn't do what I needed to, still works just fine so I would like to turn it into a barebones file server. I could do this under Windows, I have an old copy of W2K server install I got from my networking class... but I'd rather do it via Ubuntu.I know there are automated install options but I can't figure out how to make use of them. All I need to have it do, is on install:Install X11 as the desktop environment (lightweight, resource friendly).Install VNC to allow me to remotely administer the server and fine-tune any configurations Setup up the NIC so I can obviously network it.
If there's a way to strip off the extra programs (ie: games, office software, graphics editors, etc), that'd be fine. I'm unsure if I want to do any media streaming (specifically of music, unsure if the onboard graphics is suited to video)I don't have a spare monitor to hook this up with, and I want to stash this machine in an out-of-the way place where it won't be noticed.Can anyone help me or point out an 'idiot's guide to automated installing Ubuntu' by any chance?
I'm trying to install the desktop version on my laptop but i'm having an issues. I wrote the .iso file on a CD and restart my pc to boot. So -> the pc founds the medium, i'm choosing the language, i'm choosing "Install ubuntu" and nothing happens. The dots srarts to blink and that's all. When i press anykey opens an cmd promt (something like that) and there's a lot of errors - for example: ... file failed to open due to unknown user id", some files are missing and so on. I tried "try ubuntu without installing" but the same thing. I hear a sound (i guess this the "srart sound" of ubuntu) and that's all. The orange screen, the icon in the middle and the blinking dots. I made two CDs - one burned with win 7 integrated soft - right click and "burn disk image", and other burned with infra recorder. Nothing changes.
View 1 Replies View RelatedRecently my moms computer crashed and I'm trying to fix it I'm pretty much finished but, I installed Ubuntu via live CD, I thought that would be fine with her but, no, she hates Ubuntu and she wants windows back.
The only problem is her CD-Rom drive is now broke and none of her usb ports work. So I'm wondering if there is a way to install Windows 7 without a USB or CD from inside Ubuntu?
I've found ways to do it from inside windows, but never from inside Ubuntu, any ideas?
I have used Universal-USB-Installer to create a bootable usb stick (sandisk cruzer).I already have xp on the first partition (I installed this via usb so know that the laptop is capable of it).Booting to the usb stick brings me to the install menu forst. I choose "install to hard drive" which just reloads the same menu. Tried over and over, also tried booting as a live cd but this has the same result.
View 9 Replies View RelatedI've made a startup disk with a 2GB USB stick, following the instructions from Then I tried to use this USB disk to install Ubuntu in a new computer.The computer can boot from the USB drive successfully, but after I click "Install Ubuntu", it reports that my computer doesn't meet the requirement of "has at least 2.6 GB available drive", but actually my computer has 2*500 GB hard disk which can been recognized in BIOS and displayed in the BOOT option list.How can I fix this issue? btw: if I don't choose "Install Ubuntu" but "Try Ubuntu", the system will hang forever.
View 2 Replies View RelatedI downloaded the 6.06 version of xubuntu because i have a laptop that doesnt support high graphics mode, and i wasnt able to figure out how to get it to run in low graphics mode. i figured that i would get a version from a while back, and then update it up to the current version. now, to the problem. I was able to upgrade 6.10, but now it says Ubuntu version 8.04 available, so i tried to update it. it gets most of the way through the part where it says calculating or something like that, and then it says: "Can't install 'xubuntu-desktop' It was impossible to install a required package. Please report this as a bug." with an option that says close at the bottom. when i click close another window pops up that says: Could not calculate the upgrade A unresolvable problem occurred while calculating the upgrade. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport. Then the window just closes... anything that i could do to get rid of this problem? EDIT: Is there any way to update directly from an .iso file on the desktop?
Using the video card Nvidia 7800GT on an AMD4200, MB T6100, I am unable to install from the iso, as progression is halted by a video mode that is unviewable. (black and white rows). I can get to the "f6" menu, however once I attempt an install it fails. My main goal is to install Mythbuntu, however the problem seems to be with the Unbuntu install drivers.This post worked to get around this on version 6.10, however these instructions no longer work. http://ubuntuforums.org/showthread.php?t=379807
Is there any way to use the newest Nvidia drivers that should work from a new install CD? I do not see a command line option, which would seem to allow me to install and update and setup the distro, THEN add my drivers before I run xconf.
I have just been trying to fix a friends comp, they had Windows crash, and it wouldn't reinstall properly. So I thought I'd put Ubuntu 10:04 on it instead. I burnt the CD today from an ISO that I've used perfectly fine in the past. When I finally got it to boot into the trial desktop. The install button on the desktop wouldn't work. Everything else that I tried to run would run fine. is there some way that I can run it from the terminal or could this indicate a fault in the Live CD?
View 2 Replies View RelatedI'm attempting to install Ubuntu on my girlfriend's old desktop. Her gateway laptop's motherboard just died on her, and until we can figure out a real solution she's using this old desktop that was running Windows XP. It was her parent's and it's an eMachine. So, meh. It's whatever.
I have an Ubuntu disc from Canonical and one from burning the .iso image. I've been fighting with it all evening trying to just get the thing to boot. It starts up, shows a purple screen with an Ubuntu logo on the bottom. If I don't hit Enter it will go into a crazy cycle of black screen command line things. It says various errors, but moves too fast for me to see anything that is actually happening. However, if I do hit Enter it takes me to the "Try Ubuntu without installing, etc." screen.
No matter what I hit from the selection, it goes to the black screen with random command line entries floating about. Various error, various actions being done. If I hit to run as Live CD or Install it, it will eventually stop and say "Welcome to Ubuntu! *insert website address here*" and give me the chance to type in commands.
ONCE during the power on/power off cycles of me fighting did the Live CD actually run. It ran nicely, and I clicked the icon to install Ubuntu and it got to 49% complete and said there was an error with the disc. I installed Ubuntu on my desktop last week with the same disc flawlessly. It ran with the real Ubuntu disc, the burnt ones do nothing.
I could tell you system specs but Windows was erased during the Live CD stint and there are no stickers on the front to tell you. But I can crack it open and look if needed.
