I've been running compiz with no problem for quite a long time, even though my sources.list contained some weird stuff. At that time, running apt-get update would tell me that some of my sources couldn't get accessed to and that older file would be used. I checked it out and I found lots of sources refering to Feisty. here how it looked like:
[Code]...
I've got the following problem: I just noticed that there were just very few notifications about updating the system (usually there are damn many of them in a week) So I opened the update manager and clicked on "refresh list". The following result popped up: p,li{white-space:pre-wrap;}E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found First I thought, it would be just some kind of server problem, but it didn't stop. The next thing was to research the thread and I even found something. However, the solution suggested didn't work at all. (Things, which might have caused this: I installed the default software center |I'm using Kubuntu, but in this case that fact doesn't matter| and used it. To sum up:
- not able to update the system referring to the launchpad main sources for 11.04
- following error: E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found It would be great if this was a common issue and I've been simply too stupid to find a proper solution. So you could just post the link.
I am using ubuntu 9.10. Can any one check my /etc/apt/sources.list file and let me know if anything wrong in the file. Sudo apt-get update is not working, there are some packages which are failing.
View 1 Replies View RelatedE: Malformed line 59 in source list /etc/apt/sources.list (dist parse) E: The list of sources could not be read. Go to the repository dialog to correct the problem. E: _cache->open() failed, please report.
these are are errors i got when i try to open synaptic package manager! this is the list:
[Code]....
I get an error when trying to run update manager or Synaptic - same thing from Ubuntu Tweak as well. I also tried to update via terminal
[code]...
Due to the fact that there is not Official or PPA available for the new stable Compiz 0.8.8 announced on 30th March 2011 [URl]... here is a guide to compile it from the sources. This guide works for Gnome env only; I wasn't able to compile the KDE part This procedure has been tested on Ubuntu Lucid and Maverick.
Create a backup of your active compiz settings:
Code:
cp -a $HOME/.config/compiz $HOME/.config/compiz.bak
Install the dependencies (Lucid):
Code:
sudo apt-get install build-essential libxcomposite-dev libpng12-dev libsm-dev libxrandr-dev libxdamage-dev libxinerama-dev libstartup-notification0-dev libgconf2-dev libgl1-mesa-dev libglu1-mesa-dev libmetacity-dev librsvg2-dev libdbus-1-dev libdbus-glib-1-dev libgnome-desktop-dev libgnome-window-settings-dev gitweb curl autoconf automake automake1.9 libtool intltool libxslt1-dev xsltproc libwnck-dev python-dev python-pyrex libprotobuf-dev libprotobuf5 protobuf-compiler python-sexy wget libfuse-dev
[Code]...
Some reason i can't update my sources no matter how many servers i try to update it from it does not work i tryed alot of things like update manager and synaptic package manager and terminal to update but nothing is not working
Could not download all repository indexes
The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct.
i can get on the internet fine but the update manager has not worked for 12 days code...
I really like being able to mount remote file systems using the Places > Connect to Server ... tool on Ubuntu 10.10 -- it makes transferring files a breeze.
Unfortunately, the only way to access a particular server at work (call it Server A), is by first SSHing into an intermediate (Server B), which is the only one with a public ip.
My process for transferring files from Server A is currently:
myComputer $ ssh serverB
serverB $ ssh serverA
serverA $ scp file to serverB; exit
serverB $ scp file to myComputer
Needless to say, this gets tiring, and multiple transfers are slow.
Is there a way to mount serverA directly on my computer (by tunnelling through serverB in the background)? Failing that, how about using sftp?
I'm looking to find out how many times a file has been displayed on the web. I've setup Google Analytics link tracking but I'm trying to figure out how many times BEFORE Google analytics was setup people clicked and viewed a pdf file.
Is there a script that I could run through the log files to find out how many times it has been served?
I have a dozen huge folders loaded with files (images, and so..).. I was wondering if Apache marks the files it accesses..
Thus, in case I want to delete files which haven't been accessed or surfed for a long time.. is that possible?
I'm sorry if this is recurring subject, but I have searched the forum for such a subject and can't find one.I'm using Xubuntu 8.10, I'd like to update my programs to the latest releases, but the available updates in 8.10 versions are not the newest ones. I can't upgrade to a newer version of Ubuntu due to some known issues with older Intel drivers.
Is it possible to have the latest updates of packages while I still using 8.10 version?
I'm trying to update my sources so that I can download some software.I am running Ubuntu 7.04. In another post, I was given this link for updating my source list. [URL]I have download quite a few files from this ftp, I've manually edited my sources list, and by sheer luck my system is still running. what steps I need to take in order to update my sources?
View 9 Replies View Relatedi tried to make my desktop 3d so i type in terminal following command sudo apt-get install compiz-fusionbut it give the error "Couldn't find package compiz-fusion" why dis error comes plz tell me how to solve it i am a new user for ubuntuHow to install the required package Please tell me exextly what i have to it
View 1 Replies View Relatedi tried to make my desktop 3d and whan use command in terminal it tells couldt find package compiz-fusioni dont know for which package it is saying .. m new user for linux so dont know what is package meant for ow to get dis package for 3d desktop
View 2 Replies View RelatedWith the updates received with Ubuntu 10.10 my grub splash screen has become very busy. Is there a proper way to clean off the older update options?My dual boot for Windows 7 has now been pushed off to a second screen.
View 9 Replies View RelatedI need to prevent that the latest kernel update removes the only kernel that still works in my computer. how can i do this? Currently I have 3 linux kernels versions:
Code:
Ubuntu 10.04 LTS, kernel 2.6.32-23-generic
Ubuntu 10.04 LTS, kernel 2.6.32-23-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
[code]...
But only the oldest works. With the new update there is a new kernel version (2.6.32-24) that possibly will not boot (like previous 2.6.32-* kernels) and also I expect that, as in previous updates, the oldest kernel will become inaccessible, thus rendering my ubuntu unbootable.
PS: unsolved threads on the underlaying problem: Can't boot default kernel after upgrading from 9.xx to 10.04 lucid Upgrade to 10.04 freezes on the Ubuntu screen
Using: Ubuntu Lucid The Update Manager has placed me with an odd dilemma, it says that: "adobeair (version 2.5.1.17730) will be upgraded to version 1:2.0.4.13090-1lucid1"
So 'updating' version 2.5 with version 1.2 I think this has happened because Adobe Air updates itself (asking permission first of course) using it's own dialog box from time to time when I run BBC iPlayer Desktop. What should I do, update or not?
My laptop is a Medion MD 96970 (bought at Aldi in September 2008) with
- graphic card nVidia GeForce 9300M G
- processor Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz
- 82801H (ICH8 Family) HD Audio Controller
- 3GB RAM and 300 GB memory
1) Originally, my laptop came with Windows Vista. Then I got a SUSE linux 11.0 CD, let it make a partition and installed Suse 11.0. Since Suse11.0 isn't updated any further I would like to change to Suse 11.3 (or whatever is newer). How should I proceed? (I can't find my old Windows Vista CDs and would like to KEEP THE PARTITION, thus formating all isn't an option)
2) In order to make a backup I bought a portable hard drive from iomega (USB 2.0). Then I noticed that it is formated in NTFS. SUSE 11.0 doesn't seem to like it --- what should I do? Can I reformat it somehow?
3) Suse 11.0 doesn't like my sound card. Thus I couldn't Skype or listen to music --- do you know if this problem is solved under Suse 11.3?
I was following this thread: Upgrade kde4.6>
But just before I clicked accept after saying switch system packages to kde4 repo (the one in that thread) I noticed loads of the packages were older than those installed. In the list it has installed (available) and lots of them were all highlighted in red, and the installed version numbers were higher than the available, yet I'm running kde 4.6.0.
I have updated from 9.10 to 10.04 on line via Update Manager. Update Manager messed up my sources. Blocked most of them on update. I unblicked them and changed everything to Lucid from Karmic. No luck. Errors all the time:
Code:
W: GPG error: [URL] lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
I cannot add gpg keys and use for example canonical.
How to change update sources in Fedora 15? ive just installed fedora 15 beta, and i cant find 'update sources' . i found it in 'system settings' in alpha release, but it disappeared in beta
View 3 Replies View RelatedI'm currently running a dual boot system of Win XP & Ubuntu 9.1. When first installed, about a month ago, all was working fine then I started running the update manager and for a while that was good also. Suddenly I started having problems, for example, I couldn't download new software. I kept getting a message about waiting on other software managers or something. (since the re-install that is no longer an issue). Next I was having problems installing updates for some reason. Apparently something got corrupted. When my wife tried to boot up the computer last night we got a message that had to do with the kernel and Ubuntu wouldn't load at all and I wound up re-installing the OS.
Obviously something got screwed up with some of the updates and now that I've got Ubuntu up and running again I'm afraid to download ANY updates at all. What is a person to do if you can't trust downloading updates from supposedly trusted sources? My attitude now is, if it ain't broke don't fix it.
I'm running 9.04 and trying to use the update manager. On checking for updates, I get the error message:W: Failed to fetch http://mirror.uoregon.edu/ubuntu/arc...ty/Release.gpg Could not connect to 69.219.142.196:21 (69.219.142.196). - connect (111 Connection refused)W: Failed to fetch http://mirror.uoregon.edu/ubuntu/arc...tion-en_US.bz2 Could not connect to 69.219.142.196:21 (69.219.142.196). - connect (111 Connection refused)(more...)This used to work, but now it doesn't. I tried selecting all kinds of different sources in the "Software Sources" GUI. And this seemed to change my /etc/sources.list accordingly. But, whatever the hostname given (above mirror.uoregon...), that same IP address is shown 69.219.... huh? I can browse the web, etc fine from this computer
View 4 Replies View RelatedI would like to know if it is possible to disable apt-get's on a few packages I have compiled from sources : I have removed some ext from PHP and I don't want it to upgrade itself to a new version when there is one.
View 3 Replies View RelatedJust leads to a list of packages. Are these taken down and installed if needed? I take it these are installed from main component right?Is this just to let people know there's a new version in main? If you didn't have "deb http://security.debian.org/ distrib/updates main", wouldn't the updates be pulled from "deb http://whatever/debian distrib main" anyway when you did an apt-get update (by logical reasoning that they'd be new?)
Or is it that you can't detect new versions directly from main and you need the updates package to point out which ones have updated versions?
i am getting enjoyed openSUSE 11.3 but i got some problem on installing some applications like nano, pico and i couldn't update the system in CLI and/or GUI ()YaSt software update), i am feeling all the problems are related with the repository, and i have tried to refresh, add and edit repositories still i can perform such actions, i am the supper user (root).
View 9 Replies View RelatedI'm getting code...
every time i try to update. The number of bytes sometimes changes but it ends up always failing to download the full 862kB and suggests checking my Internet connection.... which is fine.
I've been having some problems with updating recently. Whether I update using Synaptic, or apt-get, it hangs at the end, and gives various messages as at the bottom of the below apt-get update:
Ign cdrom://[Debian GNU/Linux 5.0.4 _Lenny_ - Official i386 CD Binary-1 20100131-18:53] lenny Release.gpg
Ign cdrom://[Debian GNU/Linux 5.0.4 _Lenny_ - Official i386 CD Binary-1 20100131-18:53]
[code]...
I just installed Ubuntu 9.10 and at some point I realised that the Update manager application will not open when I click on it the hard drive spin a little but nothing happens.I realized that the Software sources et Hardware drivers apps are in the same states. I was not able to see after what operation/installation I did that I they stop working.I am a beginner with Linux, and I feel that if I reinstall I will fall into the same hole .
View 8 Replies View RelatedAfter installing madwifi, I get this error message at login
couldn't update ICEauthority/home/name/ICEaithority.
Now I don't have to login i.e. enter my password. It just goes to a black screen and I get this error, which I close out and than I am logged into my desktop which seems to be fine.