I upgraded to 10.10. Now I want to install medibuntu. I have the repos added, but when I try to add the key-ring with the terminal it won't add. Can someone give me the command for that again?
View 7 RepliesI recently discovered the medibuntu repository and wanted to add the repository to synaptic. I copied and pasted the code from this: [URL] web page on medibuntu.org's website.
The attachment shows exactly what the terminal spit out after running this command (and the command that was run - of course). What I am wondering about is the last six lines - which seem to indicate that, at a minumum, getting some key was not successful. I'm not sure how important this is; but, since I don't actually have anything I need to install from this repository right now, I wanted to be sure I'm squared away for when a time may come in the future.
After running the command I did the following to try and determine the status:
I went into synaptic > settings > repositories and looked under two of the tabs to see what was there:
The tab, "Other Sortware" Lists two entries at the bottom that stood out to me. They are:
Medibuntu - Ubuntu 11.04 "natty narwhal" (http:// packages.medibuntu.org/natty free non free) which was checked.
And:
Medibuntu (Source) - Ubuntu 11.04 "natty narwhal" (http:// packages.medibuntu.org/natty free non free) (Source Code) which was not checked.
The tab, "Authentication" lists a total of three entries. Their descriptions are:
Ubuntu Archive Automatic Signing Key
Ubuntu CD Image Automatic Signing Key
And:
Ubuntu Extras Archive Automatic Signing Key
None of those (under this Authentication tab) strike me as having anything to do with medibuntu (could be wrong though - just not sure).
Finally, I did a search in synaptic for a library I think should be available through medibuntu, "libdvdcss." I was presented with a list of eight items, none of them matching libdvdcss by title. The closest match by title and description that I could identify was, "libdvdread4" This I did as a sort of test to see if I might be accessing that repository.
Attempting to add the Medbuntu key, so I can install ubuntu-restricted-extras. code...
So how to I apply the --fix command please?
When you add medibuntu to 10.04, isn't there supposed to be a "medibuntu" sub-category on the left side? I installed the medibuntu repo expecting that I'd find google earth in there. But when I added it, I didn't see it listed there - even after rebooting.
View 3 Replies View RelatedI would like to put a command to ring the system bell several times when a connection via PPP drops.
Where/how can this be done using bash?
I installed the Ubuntu restricted extras, do I still need to install Medibuntu? What is the difference?
View 1 Replies View RelatedI had my Logitech Webcam/mic working perfectly, in 8.10, but when I upgraded to 9.10, the video stopped working. The camera works in lots of other software,Cheese to luvcview to testing with gstreamer-properties But Skype's video crashes when I try to use the video camera. Usually a segmentation fault.
Lots of other threads here suggest that using the version of skpye packages in medibuntu is the solution. So I added medibuntu to my /etc/apt/sources.list, reloaded to get the latest directories. I don't see any "skype" to install, either in Synaptics or in the shell with apt-get Output from apt-cache search is
# apt-cache search skype
skytools - Database management tools from Skype to PostgreSQL
python-skype - Skype API wrapper for Python
skysentials - extra functionalities for Linux Skype client
skype-mid - Skype for MIDs
p.s. any one have clues as to why this broke going from 9.04 to 9.10?
how i use medibuntu to install all codec
free AND NONE FREE
Skype is not available for 9.10 through medibuntu, does anyone know why?
View 2 Replies View RelatedI followed instructions on the medibuntu site for installing the codecs to play .wma files. I checked to make sure the repositories where properly added and they are. I even tried usin VLC player.
View 4 Replies View RelatedI upgraded a machine from 9.10 in the hopes that 10.04 will have fixed the audio problems that were present in the 9.10 installation -- the problem being that I have no audio. When I check the pulseaudio volume meter, it shows audio present in both channels. I've not been able to find anything where a mute button is checked.
Thinking it might be a codec, I tried to reinstall Medibuntu. I get the error message: unable to lock /var/lib/dpkg. Is another process using it. I've done a "ps -ef" looking for a process that might be causing problems, but no luck. I'm using an Intel ICH5 audio board -- if I'm reading everything correctly.
Sorry for the multiple headings, but I thought they might be inter-related. What I'd like: audio playback from an on-line source (Hulu.com). Ideas on how to make that happen will If medibuntu isn't part of the problem, just let that slide by, and I'll post a separate help "request" later.
i recently installed Ubuntu 10.4 LTS onto my new machine and when i tried to add the medibuntu repository using the
sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list && sudo apt-get --quiet update && sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring && sudo apt-get --quiet update
command i receive this error..
W: GPG error: http://packages.medibuntu.org lucid Release: The following signatures were invalid: BADSIG 2EBC26B60C5A2783 Medibuntu Packaging Team <admin@lists.medibuntu.org>
I removed old ffmpeg
Code:
sudo apt-get remove ffmpeg
Want to install new one from Medibuntu repository. I have issued command on [URL]
Is there a command which display the repository of given archive (which will be installed) ? I wan to ensure that future installed ffmpeg will be installed from Medibuntu and not from some other repository.
I'm following the instructions in the Medibuntu wiki. When I run the command in the terminal to add it to the repository, it runs for a couple of minutes then gives this error: Code:W: GPG error: URL...The following signatures couldn't be verified because the public key is not available: NO_PUBKEY BE1B248616AE4E77.What does that mean, and how can I fix it?
View 3 Replies View RelatedI'm using Ubuntu 10.10 (i guess 64 bits), not the Maverick version but the new 10.10. My laptop is Acer Aspire 5715Z.
Now I was on this website and tried to add the repository to get the Medibuntu packages with the following code:
Code:
sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list && sudo apt-get --quiet update && sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring && sudo apt-get --quiet update
[Code].....
Unfortunately, I am stuck running jaunty -- because my company still requires this as our standard OS for our software. I have a computer with a fresh install of 9.04 but of course none of the medibuntu packages. Why did they take down jaunty from the medibuntu repository! Where I can get these packages now? (w32codecs, etc.)
View 8 Replies View Relatedlogon will not recognize my password nor will key ring .
View 3 Replies View RelatedI'm using Ubuntu 10.04 Lucid -- I upgraded from Ubuntu 9.10 which also had kubuntu desktop installed.After entering my username and password in the user login screen, I'm prompted for my key-ring password even though my key-ring password and my user login password are the same. How can I have key-ring password prompt automatically use the password entered at user login?
View 2 Replies View Related9.04 Dell Inspiron 1525. Update Manager fails to retrieve database info for Medibuntu. Is this a phase error with Adobe swf or reader? What should I do?
View 9 Replies View RelatedHow do I insert Medibuntu as a software source? Are there any other reliable general software sources worth inserting?
View 2 Replies View RelatedI was doing an update today and got the following error:
W: GPG error: [URL] lucid Release: The following signatures were invalid: BADSIG 2EBC26B60C5A2783 Medibuntu Packaging Team <admin@lists.medibuntu.org>
I have tried updating the keys, and got this:
apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 2EBC26B60C5A2783
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --recv-keys --keyserver keyserver.ubuntu.com 2EBC26B60C5A2783
gpg: requesting key 0C5A2783 from hkp server keyserver.ubuntu.com
gpg: key 0C5A2783: "Medibuntu Packaging Team <admin@lists.medibuntu.org>" 6 new signatures
gpg: no ultimately trusted keys found
gpg: Total number processed: 1
gpg: new signatures: 6
I installed a couple of updates that the update manager said were important the other night and now I can't get past the default key ring password screen. Only the mouse works (USB); the keyboard has no response.I know the password but I just can't get the keyboard to work.
View 1 Replies View RelatedI have a Fritz!Card PCI which I used to display and log calls to my phone on Windows XP with. Now that I use Ubuntu Maverick x64, I tried to do the same with isdnlog. Logging the calls to /var/lib/isdn/calls works fine, but the START command doesn't work.
I have experimented with different parameters (user, group, interval, time, flags) in the start section, nothing worked.
I have read this tutorial to get started. The installed version of isdnlog is 1:3.12.20071127-0ubuntu6.
Here you see the files:
/etc/isdn/isdnlog.isdnctrl0
Code:
# This is a very short summary with the important options.
# for a longer descriptions of all options : please read isdnlog(8)
[options]
#log=1 # log d-channel messages. value may be 0-15 (bit coded flags)
[Code].....
Because of a hard disk failure I had to buy a new disk and reinstall Ubuntu 10.04. Prior to the install I was running the live cd version of 10.04. When I connected to my wireless network and entered the password the key manager wanted me to enter a password to protect the network password. Now every time I boot up the system the network will not automatically connect. (It used to do this). Now I have to click on the network manager and select my network. When I do this I get the key manager asking for a password.
So how do I stop the key manager nonsense and get the network to connect automatically as it once did.
I recently installed UBuntu 11.04 and dual booting it with WIndows 7, I really like linux and considering removing W7 and only have Ubuntu But the problem is I can only connect when using an ethernet cable, when it comes to wirelesss, I type my password, yet a ring keep rotating and it never connects. My laptop is HP-G62
View 3 Replies View Related I get the below errors when trying to connect to the below repos.It has almost always worked in the past. Is the site "packages.medibuntu.org" down again !?
Err http://packages.medibuntu.org karmic Release.gpg
Could not connect to packages.medibuntu.org:80 (88.191.82.11), connection timed out
Err http://packages.medibuntu.org karmic/free Translation-en_CA
[code]....
Is there any way to connect a Fedora 14 PC to a Token Ring LAN? I know I need to use the olympic driver for my card and I know how to configure it in an older version ubuntu, but I'm coming up totally empty on Fedora.
View 11 Replies View RelatedI wanna capture network packets from DMA ring buffer, just like netfilter. i wanna capture it from DMA, because i wanna get MAC address of I/O packets, so netfilter not included MAC address of out going packets because its on IP level and Ebtables is like that too. how i can capture network packets from DMA ring buffer.
View 9 Replies View RelatedI am having issues getting the modem it the dial-in server I have set up to answer on the correct ring. I have the /etc/inittab set:
Code: S1:2345:respawn:/sbin/mgetty -n 7 -x 6 -D ttyS2 yet I have to play with 'init q' and minicom to get it to answer on ring 7. Then a reboot destroys the setting and I have to go through the whole hassle again and it goes back to answering on the first ring.
This is not acceptable. This dial-in server is only a very back door into my network. It is only turned on when needed. Most of the time it is not powered up. When it is turned on it is by a non-tech person with out the ability to jump through the hoops to get it to answer on the correct ring.
Ideally I want this modem to just listen to the line after it stops ringing to check for a data signal and if it does not find it just hang up. If it finds a data signal then establish a connection and all that. That way it does not interfere with answering machine on the line. Google has yielded very little info about setting up dial-in servers. Modems are not used very much any more.
Evolution keeps asking me asking for the passwords for the mail servers I use for the key ring. And sometimes crashes if I try to cancel. I mean it asked yesterday and then again today.Is there anyway to reset the key ring passwords and start from scratch.Apparently to many things use key ring so it can't be removed.
View 4 Replies View Related