When you add medibuntu to 10.04, isn't there supposed to be a "medibuntu" sub-category on the left side? I installed the medibuntu repo expecting that I'd find google earth in there. But when I added it, I didn't see it listed there - even after rebooting.
View 3 RepliesSkype is not available for 9.10 through medibuntu, does anyone know why?
View 2 Replies View RelatedI followed instructions on the medibuntu site for installing the codecs to play .wma files. I checked to make sure the repositories where properly added and they are. I even tried usin VLC player.
View 4 Replies View RelatedI upgraded a machine from 9.10 in the hopes that 10.04 will have fixed the audio problems that were present in the 9.10 installation -- the problem being that I have no audio. When I check the pulseaudio volume meter, it shows audio present in both channels. I've not been able to find anything where a mute button is checked.
Thinking it might be a codec, I tried to reinstall Medibuntu. I get the error message: unable to lock /var/lib/dpkg. Is another process using it. I've done a "ps -ef" looking for a process that might be causing problems, but no luck. I'm using an Intel ICH5 audio board -- if I'm reading everything correctly.
Sorry for the multiple headings, but I thought they might be inter-related. What I'd like: audio playback from an on-line source (Hulu.com). Ideas on how to make that happen will If medibuntu isn't part of the problem, just let that slide by, and I'll post a separate help "request" later.
I installed the Ubuntu restricted extras, do I still need to install Medibuntu? What is the difference?
View 1 Replies View Relatedi recently installed Ubuntu 10.4 LTS onto my new machine and when i tried to add the medibuntu repository using the
sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list && sudo apt-get --quiet update && sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring && sudo apt-get --quiet update
command i receive this error..
W: GPG error: http://packages.medibuntu.org lucid Release: The following signatures were invalid: BADSIG 2EBC26B60C5A2783 Medibuntu Packaging Team <admin@lists.medibuntu.org>
I removed old ffmpeg
Code:
sudo apt-get remove ffmpeg
Want to install new one from Medibuntu repository. I have issued command on [URL]
Is there a command which display the repository of given archive (which will be installed) ? I wan to ensure that future installed ffmpeg will be installed from Medibuntu and not from some other repository.
I had my Logitech Webcam/mic working perfectly, in 8.10, but when I upgraded to 9.10, the video stopped working. The camera works in lots of other software,Cheese to luvcview to testing with gstreamer-properties But Skype's video crashes when I try to use the video camera. Usually a segmentation fault.
Lots of other threads here suggest that using the version of skpye packages in medibuntu is the solution. So I added medibuntu to my /etc/apt/sources.list, reloaded to get the latest directories. I don't see any "skype" to install, either in Synaptics or in the shell with apt-get Output from apt-cache search is
# apt-cache search skype
skytools - Database management tools from Skype to PostgreSQL
python-skype - Skype API wrapper for Python
skysentials - extra functionalities for Linux Skype client
skype-mid - Skype for MIDs
p.s. any one have clues as to why this broke going from 9.04 to 9.10?
I'm following the instructions in the Medibuntu wiki. When I run the command in the terminal to add it to the repository, it runs for a couple of minutes then gives this error: Code:W: GPG error: URL...The following signatures couldn't be verified because the public key is not available: NO_PUBKEY BE1B248616AE4E77.What does that mean, and how can I fix it?
View 3 Replies View RelatedI upgraded to 10.10. Now I want to install medibuntu. I have the repos added, but when I try to add the key-ring with the terminal it won't add. Can someone give me the command for that again?
View 7 Replies View RelatedI'm using Ubuntu 10.10 (i guess 64 bits), not the Maverick version but the new 10.10. My laptop is Acer Aspire 5715Z.
Now I was on this website and tried to add the repository to get the Medibuntu packages with the following code:
Code:
sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list && sudo apt-get --quiet update && sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring && sudo apt-get --quiet update
[Code].....
Unfortunately, I am stuck running jaunty -- because my company still requires this as our standard OS for our software. I have a computer with a fresh install of 9.04 but of course none of the medibuntu packages. Why did they take down jaunty from the medibuntu repository! Where I can get these packages now? (w32codecs, etc.)
View 8 Replies View RelatedAttempting to add the Medbuntu key, so I can install ubuntu-restricted-extras. code...
So how to I apply the --fix command please?
how i use medibuntu to install all codec
free AND NONE FREE
9.04 Dell Inspiron 1525. Update Manager fails to retrieve database info for Medibuntu. Is this a phase error with Adobe swf or reader? What should I do?
View 9 Replies View RelatedHow do I insert Medibuntu as a software source? Are there any other reliable general software sources worth inserting?
View 2 Replies View RelatedI was doing an update today and got the following error:
W: GPG error: [URL] lucid Release: The following signatures were invalid: BADSIG 2EBC26B60C5A2783 Medibuntu Packaging Team <admin@lists.medibuntu.org>
I have tried updating the keys, and got this:
apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 2EBC26B60C5A2783
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --recv-keys --keyserver keyserver.ubuntu.com 2EBC26B60C5A2783
gpg: requesting key 0C5A2783 from hkp server keyserver.ubuntu.com
gpg: key 0C5A2783: "Medibuntu Packaging Team <admin@lists.medibuntu.org>" 6 new signatures
gpg: no ultimately trusted keys found
gpg: Total number processed: 1
gpg: new signatures: 6
I get the below errors when trying to connect to the below repos.It has almost always worked in the past. Is the site "packages.medibuntu.org" down again !?
Err http://packages.medibuntu.org karmic Release.gpg
Could not connect to packages.medibuntu.org:80 (88.191.82.11), connection timed out
Err http://packages.medibuntu.org karmic/free Translation-en_CA
[code]....
I recently discovered the medibuntu repository and wanted to add the repository to synaptic. I copied and pasted the code from this: [URL] web page on medibuntu.org's website.
The attachment shows exactly what the terminal spit out after running this command (and the command that was run - of course). What I am wondering about is the last six lines - which seem to indicate that, at a minumum, getting some key was not successful. I'm not sure how important this is; but, since I don't actually have anything I need to install from this repository right now, I wanted to be sure I'm squared away for when a time may come in the future.
After running the command I did the following to try and determine the status:
I went into synaptic > settings > repositories and looked under two of the tabs to see what was there:
The tab, "Other Sortware" Lists two entries at the bottom that stood out to me. They are:
Medibuntu - Ubuntu 11.04 "natty narwhal" (http:// packages.medibuntu.org/natty free non free) which was checked.
And:
Medibuntu (Source) - Ubuntu 11.04 "natty narwhal" (http:// packages.medibuntu.org/natty free non free) (Source Code) which was not checked.
The tab, "Authentication" lists a total of three entries. Their descriptions are:
Ubuntu Archive Automatic Signing Key
Ubuntu CD Image Automatic Signing Key
And:
Ubuntu Extras Archive Automatic Signing Key
None of those (under this Authentication tab) strike me as having anything to do with medibuntu (could be wrong though - just not sure).
Finally, I did a search in synaptic for a library I think should be available through medibuntu, "libdvdcss." I was presented with a list of eight items, none of them matching libdvdcss by title. The closest match by title and description that I could identify was, "libdvdread4" This I did as a sort of test to see if I might be accessing that repository.
When I go to the Update Manager to update my system I get the following error message: W: GPG error: http://packages.medibuntu.org lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 2EBC26B60C5A2783
I am not sure what this exactly means and what I need to do to fix this.
If a file gets created in the user's Desktop folder, or if a drive is added to the machine and a Desktop icon is correspondingly created, they will by default appear on the left side of the desktop (unless, in the case of the latter, the specific drive has been created before and dragged to the right side, in which case GNOME will remember to put it in the same place).
Because I have a terminal window embedded onto my Desktop in the top left corner and occupying most of the screen), I keep my icons on the right side of the Desktop instead of the left (Mac style) - Any time I add a new drive or a file is sent to the Desktop, however, I have to kill the terminal window to be able to click on the icon, then drag it back to the right side, then restart the terminal.
Is there any way to tweak GNOME so that these icons are added from the top right corner and down instead of from the top left, automatically?
Is there any possible way to fix this problem? And I honestly think this is one of the dumbest changes ubuntu have ever done.
View 9 Replies View RelatedI noticed it after booting a Linux Mint-10- live usb, and had to do a hard reboot. My grub resolution has always been 640x480. after booting to the live usb & hard reboot(rseiub didn't work), the menu is shifted to the left and I can't see the left side of it anymore. About 1" of the words are not showing.I've changed the resolution to 800x600 and I can see it now, but wonder why it happened and how to get it back the way it was. Not sure what else may have been affected.
View 7 Replies View RelatedOn Windows, the widget set for windows is on the right and the widget order is minimise, fullscreen, close. Linux in general (And Ubuntu's themes specifically) *generally* mirrored this.On OSX, the widgets are on the left and the order is close, minimise, fullscreen.On Ubuntu 10.4 the widget set has been moved to the left hand side, but is just a move of the standard windows order. Is it possible (in a way that won't break future themes or edits, so by using the GUI preferrably but I can't find any option) to change the widget ordering?
I like the Dust Sand theme fondow borders etc, which doesn't actually show icon differences for the 3, just 3 dots. As a user of Windows and OSX as well as Ubuntu I keep finding myself clicking the wrong one as my brain just expects them to be in the OSX order when on the left (it just makes sense in my head for close to be on the outside edge, whichever side that may be, and for minimiseo come beformaximise/fullscreen when reading left-right). I realise other people may (and probably will) disagree with me on this, especially non-mac users, so it'd be preferable to be able to customise the order rather than force one or the other on people.
Just upgraded Ubuntu.....now I find that the minimise and maximise icons are on the left hand side. Is there a way to get them to the right hand side?
View 9 Replies View RelatedI have installed following this guide [URL]... x_and_Mac_OS/X but I have an hp g71 349wm with intel chipsets, on ubuntu 10.10 I can't use nvidia, my system hates me if I try to install those drivers, that guide says I need either nvidia or ati drivers, I have not tried to get ati drivers going as when I tried to get nvidia going, my system totally crashed and ended up being totally unrecoverable for some reason, anyway my problem is that after installing pylotro and lotro and patching, I start it up and all I get is a big black square on the top left side of my screen.. no idea what to do to make this work. the only way to get rid of the square is to reboot.
[code]...
I installed some time ago a Mac OS theme and now I decided to use another theme but the problem im having is that everytime I open a window the Maximize, Minimize and Close bottons are all on the left side of the window...How do I change them back to their original positions?
View 4 Replies View RelatedBluefish seems to crash whenever I drag the side window all the way to the left. I'm using it on windows 7 mostly just curious to see if this also happens on Linux and maybe what could be causing it. That's the error message I get This application has caused Runtime to quit in an unusual way
View 2 Replies View RelatedIgnore, i'm an idiot... Is there no way to delete a thread I posted?
View 1 Replies View RelatedI usually used ubuntu tweak to move the buttons to another side, but when i customized one theme, i could not change the button positions by using ubuntu tweak. So is there any other way i could change the button positions?
View 6 Replies View Related