Is there any way to connect a Fedora 14 PC to a Token Ring LAN? I know I need to use the olympic driver for my card and I know how to configure it in an older version ubuntu, but I'm coming up totally empty on Fedora.
View 11 RepliesCan both token ring and ethernet be connected to same switch? If we can connect so, how can a switch able to differentiate them.
View 1 Replies View RelatedI've been trying for a couple days now to get netem rate limiting to work on a Fedora 12 i686 virtual machine (both on VMware Fusion and KVM), and have had no success.In order to do outbound rate limiting, I want to use the netem token bucket filter (TBF), as described here:[URL]Unfortunately, attempting to use the TBF results in this error:
Code:
[root@f12-build ~]# tc qdisc add dev eth1 parent 1:1 handle 10: tbf rate 256kbit buffer 1600 limit 3000
[code]...
I recently installed UBuntu 11.04 and dual booting it with WIndows 7, I really like linux and considering removing W7 and only have Ubuntu But the problem is I can only connect when using an ethernet cable, when it comes to wirelesss, I type my password, yet a ring keep rotating and it never connects. My laptop is HP-G62
View 3 Replies View RelatedI have been spending several days getting wxwidgets to work in code::blocks ide on several different platforms. Now I am down to one instance that I can't figure out. I have wxwidgets working in Fedora 13 x64, but cannot get it to work in a Fedora 13 x32 version. Actually, wxwidgets seem to be installed OK, but I run into compiler errors when I try to compile the default wxhello project. I get quite a few messages, in different header files, of this type:
/usr/include/assert.h:39:42: error: missing binary operator before token "("#if defined __cplusplus && __GNUC_PREREQ (2,95) From my friend Google this would seem to be caused by an older version of boost (before 1.37) - see http://bugs.xmms2.xmms.se/view.php?id=2215 ("It is an issue with old versions of boost and gcc4.4 http://gcc.gnu.org/bugzilla/show_bug.cgi?id=36453 It is fixed in boost 1.37")
I did a yum info command on both systems for every relevant package I could think of, including gcc(v4.4.4), gcc-c++(4.4.4), libgcc(4.4.4), libstdc++(4.4.4), boost(1.41.0), wxGTK(2.8.11), wxBase(2.8.11). Both systems are fully updated and have the same versions, with the only difference being 32 vs 64 bit. The same headers compile with no errors on the x64 system, but not x32. I have been able to find no other reason for this error than older versions of the preprocessor, yet that is apparently not the case here).
Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies View RelatedI'm using fedora 12 with sun virtualbox and I want to install texinfo 4.9 from texinfo-4.9.tar.bz2
-I extracted the archive in a folder..........ok
-In a terminal: ./configure......................ok
-In the terminal: make...........................error
I am getting:
info.c: In function 'main':
info.c:161: error: expected expression before '/' token
info.c:327: error: expected expression before '/' token
info.c:327: error: too few arguments to function 'info_add_path' ...
and a lot more. For some personnal reasons I must install it this way, I can't upgrade fedora, gcc...
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
I upgraded to 10.10. Now I want to install medibuntu. I have the repos added, but when I try to add the key-ring with the terminal it won't add. Can someone give me the command for that again?
View 7 Replies View Relatedlogon will not recognize my password nor will key ring .
View 3 Replies View RelatedI wanna capture network packets from DMA ring buffer, just like netfilter. i wanna capture it from DMA, because i wanna get MAC address of I/O packets, so netfilter not included MAC address of out going packets because its on IP level and Ebtables is like that too. how i can capture network packets from DMA ring buffer.
View 9 Replies View RelatedI'm using Ubuntu 10.04 Lucid -- I upgraded from Ubuntu 9.10 which also had kubuntu desktop installed.After entering my username and password in the user login screen, I'm prompted for my key-ring password even though my key-ring password and my user login password are the same. How can I have key-ring password prompt automatically use the password entered at user login?
View 2 Replies View RelatedI am having issues getting the modem it the dial-in server I have set up to answer on the correct ring. I have the /etc/inittab set:
Code: S1:2345:respawn:/sbin/mgetty -n 7 -x 6 -D ttyS2 yet I have to play with 'init q' and minicom to get it to answer on ring 7. Then a reboot destroys the setting and I have to go through the whole hassle again and it goes back to answering on the first ring.
This is not acceptable. This dial-in server is only a very back door into my network. It is only turned on when needed. Most of the time it is not powered up. When it is turned on it is by a non-tech person with out the ability to jump through the hoops to get it to answer on the correct ring.
Ideally I want this modem to just listen to the line after it stops ringing to check for a data signal and if it does not find it just hang up. If it finds a data signal then establish a connection and all that. That way it does not interfere with answering machine on the line. Google has yielded very little info about setting up dial-in servers. Modems are not used very much any more.
I just upgrade my Fedora 14 to Fedora 15 RC1.I found the critical issue for me that Juniper Network connect(SSL VPN) didn't work for me again.I wonder if the network interface name changed impact this, but I am not sure about it as I didn't see any obviously error.I can connect the VPN auth page with my username and password after I switch my Java plugin to Sun JRE( I use google Chrome).As the Java VPN applet started, it appeared for a while and shutdown again. I think the VPN auth has been passed at that time, the problem might about creating the VPN Tunnel.
View 8 Replies View RelatedEvolution keeps asking me asking for the passwords for the mail servers I use for the key ring. And sometimes crashes if I try to cancel. I mean it asked yesterday and then again today.Is there anyway to reset the key ring passwords and start from scratch.Apparently to many things use key ring so it can't be removed.
View 4 Replies View RelatedI installed a couple of updates that the update manager said were important the other night and now I can't get past the default key ring password screen. Only the mouse works (USB); the keyboard has no response.I know the password but I just can't get the keyboard to work.
View 1 Replies View RelatedI have a Fritz!Card PCI which I used to display and log calls to my phone on Windows XP with. Now that I use Ubuntu Maverick x64, I tried to do the same with isdnlog. Logging the calls to /var/lib/isdn/calls works fine, but the START command doesn't work.
I have experimented with different parameters (user, group, interval, time, flags) in the start section, nothing worked.
I have read this tutorial to get started. The installed version of isdnlog is 1:3.12.20071127-0ubuntu6.
Here you see the files:
/etc/isdn/isdnlog.isdnctrl0
Code:
# This is a very short summary with the important options.
# for a longer descriptions of all options : please read isdnlog(8)
[options]
#log=1 # log d-channel messages. value may be 0-15 (bit coded flags)
[Code].....
Because of a hard disk failure I had to buy a new disk and reinstall Ubuntu 10.04. Prior to the install I was running the live cd version of 10.04. When I connected to my wireless network and entered the password the key manager wanted me to enter a password to protect the network password. Now every time I boot up the system the network will not automatically connect. (It used to do this). Now I have to click on the network manager and select my network. When I do this I get the key manager asking for a password.
So how do I stop the key manager nonsense and get the network to connect automatically as it once did.
I am using the Dynamic Static version of Skype in Mint Debian OS, which uses pulseaudio.
Voice communication works OK but there is no ring sound in or out and test sound is grayed out.
I am using Reliance Netconnect Broadband+ (HUAWEI EC 1260) on my Fedora 10 and Fedora 12.
View 1 Replies View RelatedI just installed Fedora 12. My wireless card in the laptop works, and can "see" available networks. At system startup it pops a window for me to enter a security key, but I can only choose:
None
WEP 40/128
WEP 128 Passphrase
LEAP
Dynamic WEP
My router is set up to use WPA-Personal with AES, and works just fine with various Windows and Mac computers.
I ran yum install NetworkManager and same for wpa-supplicant. Both were updated to most recent version, but I still cannot enter a WPA security key.
i got little frustrated with vsftps. the transfer rate is very low. im using fedora 12 and use ad-hoc to connect beetwen my two box..
View 6 Replies View RelatedI able to connect to Internet with WAP encyrption. But after I restart my laptop, it cannot connect again.I also cannot connect to wireless with WEP encryption.I cant even connect to open wireless without password. It is very weird that I able to connect awhile with WAP but others cant.Anyone counter this problem? What is the problem? driver?But I able to detect wireless. And can connect with LAN cable.
View 2 Replies View RelatedJust installed sid on a new system and I'm having a problem with pulseaudio.I have a motherboard with built-in Realtek audio, and the system should use that for everything except the system bell, which goes through the internal PC speaker that's connected to the motherboard.It works that way on the console. If I type C-g in Emacs, the pc speaker beeps, same with bash completion etc, while aplay will play wav files through the external speakers connected to the sound card. It's perfect.
Now in X, pulse doesn't know what to do. It defaults to the external sound card speakers, so they play all "normal" sounds (like music files) but when I type C-g in Emacs, there's a drip sound that comes out of the speakers. The internal PC speaker doesn't beep at all.I'm using GNOME 3, and I like it, so I can't just purge pulse because it wants to take GNOME with it. If I go to setup > sound, "Line Out - Built-in Audio" is selected, but I have another option for "Analog Output - pcsp" ... that's the snd_pcsp module for the internal speaker. If I select that, it plays the same sound files but through the internal speaker. So when I do C-g in emacs, the beep does come from the internal speaker, but it's not the normal beep you hear in the console -- it's actually the same ogg (or wav or whatever) file that makes the drip sound from the speakers! And worse, if I sleect the pcsp option in setup, it uses the internal speaker for EVERYTHING - including playing audio music files, watching YouTube, whatever! And naturally the sound is very horrible and fuzzy.
Is there any way to tell pulse that I want to use my motherboard's soundcard for everything but the beep, just like in the console?
I had no 3D acceleration on my AMD system with RS690 IGP graphics. I'm using 64-bit install and desktop kernel, 2.6.34.7-05. Snippet from dmesg:
[Code]...
I would like to put a command to ring the system bell several times when a connection via PPP drops.
Where/how can this be done using bash?
I tryed to config the tcp/ip settings.
I tryed with the following values:
IP: 192.168.48.120
subnetmask: 255.255.255.0
gateway: 192.168.48.2
With the above settings i was able to connect to net same thing i tryed for fedora
But i was not able to connect, it will always shows the subnet mask as 192.168.48.2 ie the gatway value insted of 255.255.255.o
i'm new on board and new for linux.i installed fc 9, and it's look ok. i want to use stutic ip,so i did what i find here:uote:First, NetworkManager and static ip addresses do not get along. If you want to use static ip addresses, turn off the NM services by going to "system->administration->services" and disable the NM services and reboot.Next, goto "system->admin->network", highlight your device and click the "edit" tab and configure the device. Uncheck the "controlled by NM option" and "automatically obtain ip address" BUT then place a check in the "allow users to control" and "activate on boot"Then click the "dns" tab and fill in your dns servers ip addresses.the problem is that is no internet connection after reboot. than i go to system->admin->network,and activate the device and all ok.
View 10 Replies View RelatedI recently have just started using linux and downloaded Fedora 10 and I'm trying to figure out how to fileshare and print share with my windows vista machine.I edited the registry file on my Vista machine HKEY_ LOCAL_ MACHINESystemCurrentControlSetContro lLsaLMCompatibilityLevel and changed the level from 3 to 1.I've also gone through a lot of tutorials on editing the smb.conf file and set my workgroup name, netbios, and changed permissions on my linux machine (a Lenovo netbook) etc but thats about as far as I can get. This may sound like a dumb question but I can't even get samba to connect on my linux machine so how do I do that?
I was wondering if any of you guys can provide a solution as to how to connect or direct me to a good howto for setting up and using Samba seeing how I'm a noob.I've been on Samba.org already and I'm more confused than ever.
I have Fedora 11 and have successfully set up VNC so that I can connect within the network (direct using vnc client/server setup). I am in the middle of working on a problem and have a fried who is in another city and was trying to set up VNC so that he could connect via http, which I know is possible (that it listens on range 5800 + the display number - mine is 3 in this instance). For the life of me I cannot get the java http viewer to work, here is what I have done so far: My vncservers file:
[Code]...
My router is set up to forward incoming requests on the range 5900-5910 and 5800-5800 to this computer. I have opened ports 5902, 5903, 5802, and 5803 on my linux firewall. So far as I know, this is all that is necessary..well. Whenever I attempt to connect via [URL]:5803 I get a time out error. What could be wrong?