I removed old ffmpeg
Code:
sudo apt-get remove ffmpeg
Want to install new one from Medibuntu repository. I have issued command on [URL]
Is there a command which display the repository of given archive (which will be installed) ? I wan to ensure that future installed ffmpeg will be installed from Medibuntu and not from some other repository.
i recently installed Ubuntu 10.4 LTS onto my new machine and when i tried to add the medibuntu repository using the
sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list && sudo apt-get --quiet update && sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring && sudo apt-get --quiet update
command i receive this error..
W: GPG error: http://packages.medibuntu.org lucid Release: The following signatures were invalid: BADSIG 2EBC26B60C5A2783 Medibuntu Packaging Team <admin@lists.medibuntu.org>
I'm using Ubuntu 10.10 (i guess 64 bits), not the Maverick version but the new 10.10. My laptop is Acer Aspire 5715Z.
Now I was on this website and tried to add the repository to get the Medibuntu packages with the following code:
Code:
sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list && sudo apt-get --quiet update && sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring && sudo apt-get --quiet update
[Code].....
I recently discovered the medibuntu repository and wanted to add the repository to synaptic. I copied and pasted the code from this: [URL] web page on medibuntu.org's website.
The attachment shows exactly what the terminal spit out after running this command (and the command that was run - of course). What I am wondering about is the last six lines - which seem to indicate that, at a minumum, getting some key was not successful. I'm not sure how important this is; but, since I don't actually have anything I need to install from this repository right now, I wanted to be sure I'm squared away for when a time may come in the future.
After running the command I did the following to try and determine the status:
I went into synaptic > settings > repositories and looked under two of the tabs to see what was there:
The tab, "Other Sortware" Lists two entries at the bottom that stood out to me. They are:
Medibuntu - Ubuntu 11.04 "natty narwhal" (http:// packages.medibuntu.org/natty free non free) which was checked.
And:
Medibuntu (Source) - Ubuntu 11.04 "natty narwhal" (http:// packages.medibuntu.org/natty free non free) (Source Code) which was not checked.
The tab, "Authentication" lists a total of three entries. Their descriptions are:
Ubuntu Archive Automatic Signing Key
Ubuntu CD Image Automatic Signing Key
And:
Ubuntu Extras Archive Automatic Signing Key
None of those (under this Authentication tab) strike me as having anything to do with medibuntu (could be wrong though - just not sure).
Finally, I did a search in synaptic for a library I think should be available through medibuntu, "libdvdcss." I was presented with a list of eight items, none of them matching libdvdcss by title. The closest match by title and description that I could identify was, "libdvdread4" This I did as a sort of test to see if I might be accessing that repository.
I'm following the instructions in the Medibuntu wiki. When I run the command in the terminal to add it to the repository, it runs for a couple of minutes then gives this error: Code:W: GPG error: URL...The following signatures couldn't be verified because the public key is not available: NO_PUBKEY BE1B248616AE4E77.What does that mean, and how can I fix it?
View 3 Replies View RelatedWhen you add medibuntu to 10.04, isn't there supposed to be a "medibuntu" sub-category on the left side? I installed the medibuntu repo expecting that I'd find google earth in there. But when I added it, I didn't see it listed there - even after rebooting.
View 3 Replies View RelatedWhat is the recommended method for Installing Software not in the Ubuntu Repository? I currently want dos2unix. I discovered from wiki that that dos2unix is supposed to be in the "tofrodos package". So then I checked the ubuntu repository.
[URL]
Then I did the usual "sudo apt-get install tofrodos". After I did this I discovered that for some unknown reason ubuntu removed dos2unix from the tofrodos package. How would you recommend that I get dos2unix now? Is there a way to use "sudo apt-get install tofrodos" with a repository name to use a different repository? I saw it was in the debian repository and I know ubuntu is based on debian. Could I use something like "sudo apt-get install tofrodos debian". Should I just go directly to the author's website and download it there?
I'm trying to install Adobe Air written for Ubuntu 11.04 [URL]. I downloaded it and have it saved in "downloads". I tried opening it with Synaptic, but it won't recognize it. My hope is to use Air to run a Windows program. Air drives the database.
View 3 Replies View RelatedSo researching how to install Tomcat 6, I ran across a guide that specifically states there are issues with the repository version of Tomcat. Doing some more research it seems like this is reported in multiple places including a disussion on the official mailing list that was inconclusive. So my question is, if this is intended for a production server should I use the repository one or manually install it
View 2 Replies View RelatedI completed an installation of Ubuntu 10.10 LTS 64-bit as a guest operating system on a VMWare server. Somehow during the installation process, I neglected to install a GUI desktop. I want to install the gnome desktop, but I am running into a series of errors similar to the one shown below:
[Code]....
The first problem is that I cannot use the Arch repository. Every time I try to, it brings up a "no address record" error. I have configured my network interface properly and can ping www.google.com and receive a whole load of crap. Definitely working.
Whats wrong?
The second problem is that the boot-up process hangs for a very long time at "Starting Network." This make my boot of Arch just as slow as *buntu! WTF? Whats wrong there? Aside from that, I am unhappy that my Ethernet card is not detected but thats another question. The only ting I am pleased with right now is the speed of the system, and the fact that I used 4 different file systems on 7 different partitions without a hitch.
i reciently changed my repository to install adobe reader, i failed at installing it and managed to change my grub some how, now i can only boot into recovery mode.
View 1 Replies View RelatedI was installing software I am getting the same problem as when I do this :
su -c 'yum -y install yumex'
Error: Cannot retrieve repository metadata (repomd.xml) for repository:
updates-testing. Please verify its path and try again
I just set up Fedora14 on a PC in order to use it as an Amahi home server, but missed the step about adding the Amahi software repository during installation. I am looking for a way to add this repository.I found a support site that should show how to do this here:
[UR]
The first step is: 1. Create /etc/yum.repos.d/amahi.repo as root user I open a terminal, log in as root and enter "/etc/yum.repos.d/amahi.repo", and get the response No such file or directory.
1. Is post installation of the Amahi repository on a completely fresh Fedora14 a viable solution?
2. My experience with Linux/Fedora started yesterday evening - Is it possible to get a newbie proof explanation on how to perform the post installation?
I installed Fedora 12 and it said 500 software updates available. When I tried to install them I got this error message:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo 'Error getting repository data for $s, repository not found' $ (repoid)
I've recently struggled across this problem:
Code:
While executing this command:
I've tried to install glibc which didn't change anything.
My other problem is that I'm downloading at 35kbps from connexeon.net (Belgian repo) but that my connection is the following: [url
When I run the command << kiwi-ltsp-setup -n >> the process gets to the point where it starts "Retrieving repository 'http:__download.opensuse.org_update_11.3' metadata" What do I change so that it will read from my local update repository. The local update repository is already listed in my yast repositories while the ttp:__download.opensuse.org_update_11.3 is not.
View 1 Replies View RelatedAdd to your repositories
perl
and manually
"http://download.opensuse.org/repositories/security/SLE_10/"
[code]....
Skype is not available for 9.10 through medibuntu, does anyone know why?
View 2 Replies View RelatedI followed instructions on the medibuntu site for installing the codecs to play .wma files. I checked to make sure the repositories where properly added and they are. I even tried usin VLC player.
View 4 Replies View RelatedI upgraded a machine from 9.10 in the hopes that 10.04 will have fixed the audio problems that were present in the 9.10 installation -- the problem being that I have no audio. When I check the pulseaudio volume meter, it shows audio present in both channels. I've not been able to find anything where a mute button is checked.
Thinking it might be a codec, I tried to reinstall Medibuntu. I get the error message: unable to lock /var/lib/dpkg. Is another process using it. I've done a "ps -ef" looking for a process that might be causing problems, but no luck. I'm using an Intel ICH5 audio board -- if I'm reading everything correctly.
Sorry for the multiple headings, but I thought they might be inter-related. What I'd like: audio playback from an on-line source (Hulu.com). Ideas on how to make that happen will If medibuntu isn't part of the problem, just let that slide by, and I'll post a separate help "request" later.
I installed the Ubuntu restricted extras, do I still need to install Medibuntu? What is the difference?
View 1 Replies View RelatedI had my Logitech Webcam/mic working perfectly, in 8.10, but when I upgraded to 9.10, the video stopped working. The camera works in lots of other software,Cheese to luvcview to testing with gstreamer-properties But Skype's video crashes when I try to use the video camera. Usually a segmentation fault.
Lots of other threads here suggest that using the version of skpye packages in medibuntu is the solution. So I added medibuntu to my /etc/apt/sources.list, reloaded to get the latest directories. I don't see any "skype" to install, either in Synaptics or in the shell with apt-get Output from apt-cache search is
# apt-cache search skype
skytools - Database management tools from Skype to PostgreSQL
python-skype - Skype API wrapper for Python
skysentials - extra functionalities for Linux Skype client
skype-mid - Skype for MIDs
p.s. any one have clues as to why this broke going from 9.04 to 9.10?
I upgraded to 10.10. Now I want to install medibuntu. I have the repos added, but when I try to add the key-ring with the terminal it won't add. Can someone give me the command for that again?
View 7 Replies View RelatedUnfortunately, I am stuck running jaunty -- because my company still requires this as our standard OS for our software. I have a computer with a fresh install of 9.04 but of course none of the medibuntu packages. Why did they take down jaunty from the medibuntu repository! Where I can get these packages now? (w32codecs, etc.)
View 8 Replies View RelatedAttempting to add the Medbuntu key, so I can install ubuntu-restricted-extras. code...
So how to I apply the --fix command please?
how i use medibuntu to install all codec
free AND NONE FREE
9.04 Dell Inspiron 1525. Update Manager fails to retrieve database info for Medibuntu. Is this a phase error with Adobe swf or reader? What should I do?
View 9 Replies View RelatedHow do I insert Medibuntu as a software source? Are there any other reliable general software sources worth inserting?
View 2 Replies View RelatedI was doing an update today and got the following error:
W: GPG error: [URL] lucid Release: The following signatures were invalid: BADSIG 2EBC26B60C5A2783 Medibuntu Packaging Team <admin@lists.medibuntu.org>
I have tried updating the keys, and got this:
apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 2EBC26B60C5A2783
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --recv-keys --keyserver keyserver.ubuntu.com 2EBC26B60C5A2783
gpg: requesting key 0C5A2783 from hkp server keyserver.ubuntu.com
gpg: key 0C5A2783: "Medibuntu Packaging Team <admin@lists.medibuntu.org>" 6 new signatures
gpg: no ultimately trusted keys found
gpg: Total number processed: 1
gpg: new signatures: 6