Ubuntu Multimedia :: Could Not Connect To Packages.medibuntu.org:80 (88.191.82.11), Connection Timed Out
Apr 21, 2010
I get the below errors when trying to connect to the below repos.It has almost always worked in the past. Is the site "packages.medibuntu.org" down again !?
Err http://packages.medibuntu.org karmic Release.gpg
Could not connect to packages.medibuntu.org:80 (88.191.82.11), connection timed out
Err http://packages.medibuntu.org karmic/free Translation-en_CA
[code]....
View 8 Replies
ADVERTISEMENT
Nov 30, 2010
I'm using Ubuntu 10.10 (i guess 64 bits), not the Maverick version but the new 10.10. My laptop is Acer Aspire 5715Z.
Now I was on this website and tried to add the repository to get the Medibuntu packages with the following code:
Code:
sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list && sudo apt-get --quiet update && sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring && sudo apt-get --quiet update
[Code].....
View 9 Replies
View Related
Nov 30, 2010
Unfortunately, I am stuck running jaunty -- because my company still requires this as our standard OS for our software. I have a computer with a fresh install of 9.04 but of course none of the medibuntu packages. Why did they take down jaunty from the medibuntu repository! Where I can get these packages now? (w32codecs, etc.)
View 8 Replies
View Related
Jul 13, 2010
I am relatively new to Ubuntu. Currently running Lucid Lynx, but I cannot connect to the internet. I can ping 127.0.0.1, and google.com. Software update works as well, but the connection times out when I try connecting to a web site e.g. bbc.uk.
View 4 Replies
View Related
Jul 4, 2011
when I try to connect via PuTTY from a windows machine I get " PuTTY Fatal error connection timed out. I try to do so via a router redirecting IPadr:86 to local adr:22 on the Linux machine.
I seems not to be a routing issue since the router is setup to redirect apparently correctly.
Well I have stopped iptables and selinux is disabled. The sshd deamon is running. I can logon with ssh locally "ssh webcamATlocal adr".
View 3 Replies
View Related
Jul 4, 2010
I have been playing with this for awhile now and I am ready to go postal.
I just want to move some files around and potentially rsync my net book with my desktop as well as learn the software (my primary reason)
Steps Taken.
Set Static IP address to machines on LAN
Turned on Port Forwarding (22)
Added Rule to UFW allow 22/TCP
View 9 Replies
View Related
Dec 13, 2010
I did a clean install of the latest version of Ubuntu. For some reason, there are still internet-issues. When I tried out the following command
Code:
telnet
open ftp.microsoft.com 21
I got
Code:
telnet: Unable to connect to remote host: Connection timed out
Also, during install of the new ubuntu, it was unable to reach the repos for downloading. Odd thing is that I can go online, and that when I type 'ftp.microsoft.com' in my browser, it displays the file-hierarchy.
View 1 Replies
View Related
Apr 2, 2011
I have been getting these errors while running update manager and I can't seem to find specific information or how to resolve these problems. Was hoping someone could please provide me with some details about why they are occurring so I can deal with them myself next time and how I can go about fixing them now.
Quote:
W: Failed to fetch http://mirror.pacific.net.au/linux/u...ic/Release.gpg Could not connect to mirror.pacific.net.au:80 (61.8.0.17), connection timed out
W: Failed to fetch http://mirror.pacific.net.au/linux/u...tion-en_GB.bz2 Unable to connect to mirror.pacific.net.au http:
[code]....
View 9 Replies
View Related
May 26, 2010
I've been trying to ssh out of my home network to school computers and I keep getting:
ssh: connect to host sage.math.washington.edu port 22: Connection timed out
I've tried this on my machine (running Ubuntu 10.04) and on a windows 7 machine (using putty). I have been successful ssh'ing to this machine using either of the laptops from every other network I've tried, so I'm pretty sure it's something about my home network.
View 3 Replies
View Related
Mar 24, 2010
Five days back, i got a notification on top right side mentioning "The update information is outdated. This may be caused by network problems or by a repository that is no longer available. Please update manually by clicking on this icon and then selecting 'Check for updates' and check if some of the listed repositories fail."
So, i go ahead and click it.. it says it is downloading 1 of 19 files and after some time, i get the error mentioning "W: Failed to fetch [URK] Could not connect to 87.89.43.193:3128 (87.89.43.193), connection timed out"
I went into Software Sources and tried different servers from different countries, but there wasn't any luck. I also unchecked the repository that was giving the problem but nothing was getting downloaded from other repositories as well.
View 8 Replies
View Related
Jul 13, 2010
when I am run:
ssh -v "login"@"server"
I get:
OpenSSH_5.3p1 Debian-3ubuntu4, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to server ["address"] port 22.
debug1: connect to address "address" port 22: Connection timed out
ssh: connect to host "server" port 22: Connection timed out
I suppose this is because I am connecting from a public institute where there is a firewall that is blocking an outbound connection on port 22.Is there anyway I can bypass the firewall using the internet ?
View 2 Replies
View Related
Jun 15, 2010
When I go to the Update Manager to update my system I get the following error message: W: GPG error: http://packages.medibuntu.org lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 2EBC26B60C5A2783
I am not sure what this exactly means and what I need to do to fix this.
View 2 Replies
View Related
May 8, 2010
When you add medibuntu to 10.04, isn't there supposed to be a "medibuntu" sub-category on the left side? I installed the medibuntu repo expecting that I'd find google earth in there. But when I added it, I didn't see it listed there - even after rebooting.
View 3 Replies
View Related
Mar 23, 2011
Linux printing appeared to be working fine up until yesterday. Today typing lpq gives the following: lpq Printer 'sdst@other.domain' - cannot open connection - Connection timed out Make sure LPD server is running on the server
The /etc/cups/printers.conf file is properly set, the printers appear in localhost:631 and they are printing test pages. However, all command line print commands seem to be trying to print to sdst@other.domain I don't know why printers.conf is being ignored and why and how sdst@other.domain was added. Seems like it might have been auto-discovered?
# dit: sdst@other.domain was mentioned in /usr/local/etc/lpd.conf I'm not sure why lpd.conf is being used instead of /etc/cups/printers.conf
View 1 Replies
View Related
Jan 2, 2010
I followed instructions on the medibuntu site for installing the codecs to play .wma files. I checked to make sure the repositories where properly added and they are. I even tried usin VLC player.
View 4 Replies
View Related
May 5, 2010
I upgraded a machine from 9.10 in the hopes that 10.04 will have fixed the audio problems that were present in the 9.10 installation -- the problem being that I have no audio. When I check the pulseaudio volume meter, it shows audio present in both channels. I've not been able to find anything where a mute button is checked.
Thinking it might be a codec, I tried to reinstall Medibuntu. I get the error message: unable to lock /var/lib/dpkg. Is another process using it. I've done a "ps -ef" looking for a process that might be causing problems, but no luck. I'm using an Intel ICH5 audio board -- if I'm reading everything correctly.
Sorry for the multiple headings, but I thought they might be inter-related. What I'd like: audio playback from an on-line source (Hulu.com). Ideas on how to make that happen will If medibuntu isn't part of the problem, just let that slide by, and I'll post a separate help "request" later.
View 9 Replies
View Related
Apr 24, 2011
PPPOE connection Timed Out-i have downloaded the rp-pppoe utility and installed for PPPOE connection.As per the instruction given with the utility i followed that .i have given pppoe-setup and given all the parameters required like service name , username ,password,firewall as none ,dsn as server an all the option .finally i got the message as congratulation you have successfully setup the pppoe connection.you can use pppoe-start and pppoe-status.
View 11 Replies
View Related
Mar 21, 2011
i have two PCs A and B, both are connected via LAN PC A Configuration is
IP Address 10.102.6.232
Broadcast Address 10.102.6.255
Subnet Mask 255.255.255.0
Default Route 10.102.6.2
Primary DNS 144.16.192.55
[Code]...
I am trying to connect B from A using command shh -X devendra@144.16.205.236, and facing error like ssh port 22 connection timed out.
View 13 Replies
View Related
Nov 4, 2010
I have SSH running on port 8662 and 22. I use 8662 for the outside world (eth0 which is 192.168 network) Here are the only lines I have changed in sshd_config:
Port 22
Port 8662
#Protocol 2,1
[code]....
BTW, ports forwarded on my firewall, checked and triple checked it.
View 5 Replies
View Related
Apr 2, 2010
I had my Logitech Webcam/mic working perfectly, in 8.10, but when I upgraded to 9.10, the video stopped working. The camera works in lots of other software,Cheese to luvcview to testing with gstreamer-properties But Skype's video crashes when I try to use the video camera. Usually a segmentation fault.
Lots of other threads here suggest that using the version of skpye packages in medibuntu is the solution. So I added medibuntu to my /etc/apt/sources.list, reloaded to get the latest directories. I don't see any "skype" to install, either in Synaptics or in the shell with apt-get Output from apt-cache search is
# apt-cache search skype
skytools - Database management tools from Skype to PostgreSQL
python-skype - Skype API wrapper for Python
skysentials - extra functionalities for Linux Skype client
skype-mid - Skype for MIDs
p.s. any one have clues as to why this broke going from 9.04 to 9.10?
View 9 Replies
View Related
Jul 3, 2011
how i use medibuntu to install all codec
free AND NONE FREE
View 7 Replies
View Related
Mar 8, 2010
I am building 1 system includes 1 firewall server using iptables 1 Webserver && 1 FTP server. On FTP server IP: 192.168.1.2 - GW: 192.168.1.1, I installed ProFTPD successfully. In LAN I do everything successful.
On Firewall server <IP PUBLIC> on eth0 && IP LAN eth1: 192.168.1.1
Iptables rules:
Code: # Generated by iptables-save v1.3.5 on Sun Mar 7 21:01:16 2010
*nat
:PREROUTING ACCEPT [950:126970]
:POSTROUTING ACCEPT [89:5880]
:OUTPUT ACCEPT [19:1342]
-A PREROUTING -d <IP PUBLIC> -i eth0 -p tcp -m tcp --dport 21 -j DNAT --to-destination 192.168.1.2:21
-A POSTROUTING -s 192.168.1.2 -o eth0 -j SNAT --to-source <IP PUBLIC>
COMMIT
# Completed on Sun Mar 7 21:01:16 2010
# Generated by iptables-save v1.3.5 on Sun Mar 7 21:01:16 2010
*filter
:INPUT DROP [1599:157409]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [232:34452]
-A INPUT -i lo -j ACCEPT
-A INPUT -i eth1 -j ACCEPT
-A FORWARD -i eth0 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -o eth0 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o eth1 -j ACCEPT
COMMIT
# Completed on Sun Mar 7 21:01:16 2010 In FTP server i access to internet good.
I check port 21 on IP PUBLIC , it's return Open.
But when I using ftp command then it's show Code: Connected to <IP PUBLIC>.
220 ProFTPD 1.3.3 Server (FTP Server) [192.168.1.2]
User (<IP PUBLIC>:(none)): longvnit
331 Password required for longvnit
Password:
230 User longvnit logged in
ftp> dir
200 PORT command successful
Aborting any active data connections...
ftp> bye
C:Documents and SettingsLONGVNIT>ftp <IP PUBLIC>
Connected to <IP PUBLIC>.
220 ProFTPD 1.3.3 Server (FTP Server) [192.168.1.2]
User (<IP PUBLIC>:(none)): longvnit
331 Password required for longvnit
Password:
230 User longvnit logged in
ftp> dir
200 PORT command successful
425 Unable to build data connection: Connection timed out
ftp> dir
200 PORT command successful
425 Unable to build data connection: Connection timed out
ftp>
View 5 Replies
View Related
Feb 4, 2011
I am not so experienced with networking in Linux. I've successfully installed Red Hat Linux Enterprise 5.2 on a VMware host. When I issued nslookup command, it returns "connection timed out" error as follows:
Code:
[root@rac1 ~]# time nslookup rac1
;; connection timed out; no servers could be reached
real 0m15.038s
user 0m0.000s
sys 0m0.000s
My questions are:
(1) Is that error normal?
(2) Is there a way to decrease the 15.038s value? rac1 is the local hostname, so why it takes all that time to resolve it.
Following info may help:
Code:
[root@rac1 ~]# hostname
rac1.mydomain.com
[root@rac1 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#eth0 - PUBLIC
192.0.2.100 rac1.mydomain.com rac1
[root@rac1 ~]# ping -c 4 rac1
PING rac1.mydomain.com (192.0.2.100) 56(84) bytes of data.
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=1 ttl=64 time=0.015 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=2 ttl=64 time=0.029 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=3 ttl=64 time=0.029 ms
64 bytes from rac1.mydomain.com (192.0.2.100): icmp_seq=4 ttl=64 time=0.029 ms
--- rac1.mydomain.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3000ms
rtt min/avg/max/mdev = 0.015/0.025/0.029/0.007 ms
View 9 Replies
View Related
Apr 29, 2011
I can't fetchmail form my company server to local PC. It gives error
fetchmail: WARNING: Running as root is discouraged.
fetchmail: starting fetchmail 6.3.6 daemon
fetchmail: connection to 202.137.236.11op3 [202.137.236.11/110] failed: Connection timed out.
fetchmail: POP3 connection to 202.137.236.11 failed: Connection timed out
fetchmail: Query status=2 (SOCKET)
fetchmail: connection to gmail.comop3 [74.125.236.56/110] failed: Connection timed out.
I am trying to connect but it can't.
View 14 Replies
View Related
Apr 18, 2011
I ma facing mount problem with error connection timed out between linux and solaris machine.
when i run mount command
root@rose> mount 10.142.201.104:/view/itb_configuration_712/vobs/ims_it /view/itb_configuration_712/vobs/ims_it/
[code]...
View 3 Replies
View Related
Sep 26, 2010
I know that wget will give up after 20 failed connection attempts, but is there any way I can escape without waiting?
View 1 Replies
View Related
Jul 14, 2011
In our development box we are configured postgresql to work with Jboss. The thing is we have firewall iptables in our linux box. when the iptables is stopped we can connect the postgres db locally using -h option, also we can connect thru a weblink we have created using Jboss. But when the iptables is started we can't connect the db locally using the -h option and the web is giving the below error. Caused by:
org.postgresql.util.PSQLException: Connection refused. Check that the hostname and port are correct and that the postmaster is accepting TCP/IP connections.
at org.postgresql.core.v3.ConnectionFactoryImpl.openC
[code]....
View 1 Replies
View Related
Jan 5, 2010
I am having alot of trouble setting up evolution to work with gmail. I am using pop for recieving mail and it's slow but still works. When I try to send mail with smtp.gmail.com I get the error message that the connection timed out. How can I set this up to send and recieve email?
View 6 Replies
View Related
Mar 28, 2011
I have 2 different networks :the first one is gateway machine (eth0), and the second is a private machine (eth1). So, I've configured the iptables and forwarding stuff and when I try to ping [url]..... on the gateway machine, it works, while it doesn't work on the private network. Note: I am using VmWare 7, CentOS 5.
I could say that the problem in DNS:because when I use this command in the private network machine: [url]...., it says connection timed out; no servers could be reached ,while in the public one, it works properly.....
View 1 Replies
View Related
Sep 1, 2011
I have been trying to solve this problem for two days now looking at various forums and websites but can't really figure out what's going on here.I have setup postfix on my ubuntu and I can send emails using "telnet localhost 25" and the ehlo thingy. Apache can also send emails. My problem is with incoming emails. When I try to send an email (through Gmail) I get the following error message:
Code:
Delivery to the following recipient has been delayed:
root@example.com
[code]...
View 2 Replies
View Related
