Evolution keeps asking me asking for the passwords for the mail servers I use for the key ring. And sometimes crashes if I try to cancel. I mean it asked yesterday and then again today.Is there anyway to reset the key ring passwords and start from scratch.Apparently to many things use key ring so it can't be removed.
View 4 RepliesSo everytime I resume Ubuntu from hibernation, it remains black for a time then 2 messages on the screen appear for about 10 seconds before I can log-in:
Code: [ 0.556247] [drm:init_ring_common] *ERROR* render ring head not reset to zero ctl 00000000 head 02001000 tail 00000000 start 02001000 [ 0.556320] [drm:init_ring_common] *ERROR* render ring head forced to zero ctl 00000000 head 00000000 tail 00000000 start 02001000
I mount my Fedora AMI on my EC2 account, when I reboot the system, the passwords for ec2-user and root are changed.On the web I found that is a "feature" .
View 1 Replies View RelatedHow Do I reset passwords in Ubuntu 10.10?
View 3 Replies View RelatedI'm trying to install phpmyadmin and I mistakenly marked SSL configuration which I don't use. I then uninstalled the app but every time I install it uses the same configuration. How can I force the install to start from scratch and give me the initial install choices?
View 2 Replies View RelatedHow do I find out the existing root passwd or set up a new one? Edit mode was not an option at the GRUB menu.
View 14 Replies View RelatedI have a Fritz!Card PCI which I used to display and log calls to my phone on Windows XP with. Now that I use Ubuntu Maverick x64, I tried to do the same with isdnlog. Logging the calls to /var/lib/isdn/calls works fine, but the START command doesn't work.
I have experimented with different parameters (user, group, interval, time, flags) in the start section, nothing worked.
I have read this tutorial to get started. The installed version of isdnlog is 1:3.12.20071127-0ubuntu6.
Here you see the files:
/etc/isdn/isdnlog.isdnctrl0
Code:
# This is a very short summary with the important options.
# for a longer descriptions of all options : please read isdnlog(8)
[options]
#log=1 # log d-channel messages. value may be 0-15 (bit coded flags)
[Code].....
Does anyone know how to start back from scratch? Im thinking Im just going to not do what did before and start all over *sigh*
View 9 Replies View RelatedThe hard drive that I used with Slackware64 has died, so it's time to reinstall and start from scratch.I have been using Slackware64 for over a year now and I enjoyed it...but now with a fresh start, I'm thinking about either going to Slackware64 -Current or going to the 32 bit version.Things I wanted in Slackware64, but couldn't get, were WINE, Skype and VirtualBox. I could have gotten those if I went "MultiLib" but I didn't want to do that, I wanted a pure 64 bit system.If you had to redo your system again, would you stick with your current O/S or would you change it up.
View 9 Replies View RelatedI noticed that every time I logged in my network icon always moved to the middle of the top panel. Getting tired of moving it back every time I decided to remove the panel and start from scratch. But I cannot find the me menu or the shutdown/logoff/switch user menu. So I cannot rebuild the panel the way it was. How can I find these items?
View 8 Replies View RelatedHow to start from scratch step wise, partitioning a 300 GB HDD for Kubuntu only.
Number, types, sizes, etc of partitions?
I've kinda gone hopelessly lost on my mail server install and now want to start from scratch, after having wasted 4 days on this.Basically I have a 95% working postfix installation, a probably 100% working dovecot installation, but am not happy with it as a few things aren't working properly, and I don't know what I did!mail to /var/mail/richard NOT /Maildir - being the main oneBut, also the fact that I don't know where I went wrong, and want to understand why everything is now haywire. I am not certain if my security is working on the mail or the logins either.e to achieve is thefollowing:PostfixDovecotVirtual Users - using IMAP with Security, allowed to send mail from their clientVirtual DomainsPostfix AdminWebmail (Roundmail)Anti-Virus and Spam-filteringI started with this guide How to set up a mail server on a GNU / Linux system), which seems very, very good I might add, but it is for Courier, and when I bumbled along with the Dovecot equivalent ... that is where things broke.
View 5 Replies View RelatedI have internet access and a semi-working Ubuntu install via command line / SSH. XBMC has been running fine until I did an update, then the xorg.conf got ##$@ed and I've spent the last 4 hours googling and trying to fix it. I'd love to just reinstall, but I don't have a blank CD or a USB Drive to use. Is there anyways I can just erase everything and start from scratch? AFAIK it's not possible to run the Ubuntu Minimal install from anywhere but a CD-ROM or USB Stick.This PC also has access to a Windows directory so I guess I could use WUBI, but would like to avoid that if possible.
View 5 Replies View RelatedDo these guides work with resetting the current fedora root passwords?
http://www.labtestproject.com/linuse..._password.html
http://www.labtestproject.com/using_...d_on_fedora_10
I am using the Dynamic Static version of Skype in Mint Debian OS, which uses pulseaudio.
Voice communication works OK but there is no ring sound in or out and test sound is grayed out.
Just installed sid on a new system and I'm having a problem with pulseaudio.I have a motherboard with built-in Realtek audio, and the system should use that for everything except the system bell, which goes through the internal PC speaker that's connected to the motherboard.It works that way on the console. If I type C-g in Emacs, the pc speaker beeps, same with bash completion etc, while aplay will play wav files through the external speakers connected to the sound card. It's perfect.
Now in X, pulse doesn't know what to do. It defaults to the external sound card speakers, so they play all "normal" sounds (like music files) but when I type C-g in Emacs, there's a drip sound that comes out of the speakers. The internal PC speaker doesn't beep at all.I'm using GNOME 3, and I like it, so I can't just purge pulse because it wants to take GNOME with it. If I go to setup > sound, "Line Out - Built-in Audio" is selected, but I have another option for "Analog Output - pcsp" ... that's the snd_pcsp module for the internal speaker. If I select that, it plays the same sound files but through the internal speaker. So when I do C-g in emacs, the beep does come from the internal speaker, but it's not the normal beep you hear in the console -- it's actually the same ogg (or wav or whatever) file that makes the drip sound from the speakers! And worse, if I sleect the pcsp option in setup, it uses the internal speaker for EVERYTHING - including playing audio music files, watching YouTube, whatever! And naturally the sound is very horrible and fuzzy.
Is there any way to tell pulse that I want to use my motherboard's soundcard for everything but the beep, just like in the console?
on my laptop, I have configured my power button to hibernate the system. It works, but once a while the system, after booting and while almost being where Gnome desktop appears, reboots itself from scratch.
Configuration:
- EeePC 1000HE
- Debian Squeeze up-to-date
- Hard-disk encryption via LVM installed while installing the system
When the install button is pressed an error sign says "metalink is missing".Is there a way around this or better still a way of removing windows altogether and start from scratch?
View 4 Replies View RelatedI have an old computer I have setup as a backup computer / Linux practice computer. It is a Sun Ultra2 w/ 2x200MHz SPARC CPUs, 512MB RAM, 9.1GB SCSI HD, and Creator 3D video card. It is running Debian 6, by default with no GUI installed. But, I am wanting to try out several minimalistic GUIs with it. So, first thing I did was:
aptitude install icewm
aptitude install xserver-xorg-video-sunffb
aptitude install rcconf (used to disable X from automatically starting)
aptitude install xfe
startx
And well, it worked. Well, for some reason, I couldnt read any of the buttons in xfe, and it was stuck in the upper left corner of the screen. So then I tried PCManFM, which was better, but the icons were still all blank. However, upon trying other WMs, I have had very little success. I got dwm working, but didnt try it out for too long before removing it and trying others. I was able to get LXDE to work, and that was that last thing I got to work. Now Ive tried IceWM again, as well as jwm, and every time I end up with a black screen.
By the way, any suggestions on a WM/FM (and maybe panel) combo would be greatly appreciated as well. Even with IceWM and PCManFM, this system is pretty slow. Its really going to mostly be used as a backup internet machine. Whats the bare minimum setup to get icons on the desktop?
In particular, this is with regards to freevo, but it applies to anything that can be obtained through apt-get.
How do i remove it, and re-install it, and start again from scratch? Time and again i do "apt-get delete blah", then "apt-get install blah", only to find it's exactly the same as it was in the first place, and still broken.
Why does this happen? How can i make sure everything is COMPLETELY GONE. I don't care about lost data, i don't care about lost config files, or anything. There is just one aim here - i want it to work again.
I wonder if it is possible to have two passwords for one user account in 9.10. I have a long login password (5 words about 45 characters with spaces caps). I would like to set a shorter password for Authentication, sudo, etc. While retaining the original for logging in.In short:Have long password to login to computer.Have short password for everything after login.
View 6 Replies View RelatedI've been using various distros of Linux for over 20 years - but I'm stumped.
Was running Mint. But after taking an update a few weeks ago the network stopped working. After a lot of time and effort decided to give up on Mint and switch distros to Debian 8 Jessie.
But after changing the Network settings from default DHCP to my usual IPV4 static 10.net configuration and rebooting the network will not work.
I have several systems on a 10.100.0.0/16 LAN behind another Linux system acting as firewall/gateway.
Now, after about 7 hours of mining the Internet, I still can't get basic networking to work:
- Have tried a few combinations, with and without Network Manager and eth0 in interfaces
- /etc/network/interfaces is configured with a static IP and relevant parameters
- ifconfig shows eth0 and the correct information
- netstat -rn shows the basic default route to the gateway
- have tried with IPV6 enabled and disabled; it is not used on my LAN
The box is a desktop system, ASUS Maximum VI Formula mobo with onboard Ethernet, dual GTX 780 cards. Nothing very weird.
It all LOOKS right, but ping can't get off the box "destination unreachable", and no other system on the LAN can ping it.
I'm amazed a basic static IPV4 network setup completely breaks it. This is my main workstation - a dual-boot system where Windows runs fine - so it's not hardware.
EDIT: This has been solved. See the solution post: [URL]
I just did a new clean install of Ubuntu 10.10 on my PC. I noticed that the screensaver doesn't work at all. Is there a way to start/ reset the screensaver?
View 1 Replies View RelatedWhen I start my computer sometimes I get an error that my floppy drive isn't working and the boot process is halted. So I disabled the floppy disk seek. But Once in a while (sometimes almost every time I start) the BIOS settings are reset and I have to disable floppy disk seek and reorder boot device list again. I have checked the battery and it's fine. What else can be the problem?
View 14 Replies View RelatedI am having problems with my newly upgraded 9.10 distribution that keeps locking up. I had started a thread on that but along the way, I noticed another problem with the Update manager. I posted the following text in the same thread but realized that I must start a newer thread since it has its own issues (so sorry if you see this text in my other thread).I had upgraded from 8.10 to 9.04 with ISO image and then to 9.10 with ISO image. In between, I did not reset anything in the Update manager (the upgrades were within one day of each other). Since the computer was connected to network during upgrades, I also let it fetch any newer packages as it needed them.
After the upgrade, I started having system lock ups and it requires hard boot. I tried to check for any updates using Update Manager. It reported that system was up-to-date. However, I noticed in the Settings that cdrom was selected in Sources (perhaps because I had upgraded with ISO image). I unselected the cdrom and tried to update the packages. Since I upgraded using ISO image, there is some problem here about recognizing the repository perhaps. Do you think my problem may have stemmed from upgrading twice using ISO images and not resetting the Update Manager in some fashion in between? Although the system did fetch upgraded packages during upgrades. How can I reset the update manager to start updating properly? Perhaps Authentication is an issue?Of course, I am still having trouble with lock up.
I would like to use one time passwords with ssh.I know there is the RC Devs openotp library but I have found very little information on the web about how to use this with ssh or even if that is possible.
View 1 Replies View RelatedI have an old server running CentOS 5. The encription method used was the default MD5 for the shadow file. I would like to migrate the server to Debian Squeeze which uses SHA512. I have already copied the passwd, group and shadow file with the user accounts information but the Debian machine doesn't let the users login. I have already looked in the pam files to make it accept the MD5 encryption without any luck. how can i migrate the users without resetting their passwords?
View 1 Replies View RelatedI am trying to set up virtual users with vsftpd but I can not login to the ftp server using the usernames and passwords created in the password file.
View 1 Replies View RelatedI'm unable to reset using either the reset option in gnome shell or the command using a terminal. When I select it the shell exits and displays the graphic "exploding" and then it just sits there. Shutdown works fine; just no reset. Any ideas? I've installed from the DVD. I booted the live CD and it resets just fine so I know it's no my hardware
View 1 Replies View RelatedI installed Debian Kit on my Asus Nexus 7 tablet, and after following the installation tutorial I got it running except for I'm stuck on the step to create a new user. (btw link: [URL] .... )
Here's how it went (I can't copy&paste from my tablet so I have to type out everything...):
Code: Select allroot@android-6c40984c21c156ae:/# adduser paul374
Adding user `paul374' ...
Adding new group `paul374' (5000) ...
Adding new user `paul374' (5000) with group `paul374' ...
Creating home directory `/home/paul374' ...
[Code] ....
So since I read somewhere that selinux had some permission problem, so I did a few chcons:
Code: Select allchcon --user=u --role=r --type=init --range=s0 /etc/passwd
chcon --user=u --role=r --type=init --range=s0 /etc/shadow
chcon --user=u --role=r --type=init --range=s0 /etc/gshadow
And it did take effect:
Code: Select allroot@android-6c40984c21c156ae:/# ls -Z | grep passwd
u:r:init:s0 passwd
u:object_r:unlabeled:s0 passwd-
root@android-6c40984c21c156ae:/# ls -Z | grep shadow
u:r:init:s0 gshadow
u:object_r:unlabeled:s0 gshadow-
u:r:init:s0 shadow
u:object_r:unlabeled:s0 shadow-
...but still same thing as what happened in the beginning...
Anyway my goal is to create and be able to log in to another user so that I'm not stuck running root all the time. (Which, as we all know, is a bad idea.)
If there's a way to manually create the user by editing a few files, and root still won't be able to change passwords, I'm fine with that, as long as I have another user. Whatever it takes to just get a non-root user log-in-able...
I forgot to mention that since this is the Asus Nexus 7, there is no removable media, so chrooting from another Linux machine isn't an option, and neither is removing an SD card to use a LiveCD on it.