Ubuntu :: Isdnlog Doesn't Start Script On Ring?
Dec 3, 2010
I have a Fritz!Card PCI which I used to display and log calls to my phone on Windows XP with. Now that I use Ubuntu Maverick x64, I tried to do the same with isdnlog. Logging the calls to /var/lib/isdn/calls works fine, but the START command doesn't work.
I have experimented with different parameters (user, group, interval, time, flags) in the start section, nothing worked.
I have read this tutorial to get started. The installed version of isdnlog is 1:3.12.20071127-0ubuntu6.
Here you see the files:
/etc/isdn/isdnlog.isdnctrl0
Code:
# This is a very short summary with the important options.
# for a longer descriptions of all options : please read isdnlog(8)
[options]
#log=1 # log d-channel messages. value may be 0-15 (bit coded flags)
[Code].....
View 2 Replies
ADVERTISEMENT
Jun 26, 2015
Evolution keeps asking me asking for the passwords for the mail servers I use for the key ring. And sometimes crashes if I try to cancel. I mean it asked yesterday and then again today.Is there anyway to reset the key ring passwords and start from scratch.Apparently to many things use key ring so it can't be removed.
View 4 Replies
View Related
Jan 13, 2016
Just installed sid on a new system and I'm having a problem with pulseaudio.I have a motherboard with built-in Realtek audio, and the system should use that for everything except the system bell, which goes through the internal PC speaker that's connected to the motherboard.It works that way on the console. If I type C-g in Emacs, the pc speaker beeps, same with bash completion etc, while aplay will play wav files through the external speakers connected to the sound card. It's perfect.
Now in X, pulse doesn't know what to do. It defaults to the external sound card speakers, so they play all "normal" sounds (like music files) but when I type C-g in Emacs, there's a drip sound that comes out of the speakers. The internal PC speaker doesn't beep at all.I'm using GNOME 3, and I like it, so I can't just purge pulse because it wants to take GNOME with it. If I go to setup > sound, "Line Out - Built-in Audio" is selected, but I have another option for "Analog Output - pcsp" ... that's the snd_pcsp module for the internal speaker. If I select that, it plays the same sound files but through the internal speaker. So when I do C-g in emacs, the beep does come from the internal speaker, but it's not the normal beep you hear in the console -- it's actually the same ogg (or wav or whatever) file that makes the drip sound from the speakers! And worse, if I sleect the pcsp option in setup, it uses the internal speaker for EVERYTHING - including playing audio music files, watching YouTube, whatever! And naturally the sound is very horrible and fuzzy.
Is there any way to tell pulse that I want to use my motherboard's soundcard for everything but the beep, just like in the console?
View 7 Replies
View Related
May 5, 2010
A few days ago I upgraded my server at home from 9.10 to 10.04 LTS (server amd64). I did a fresh install. isdnlog worked perfectly under 9.10.A few informations:
Code:
$ uname -a
Linux droener 2.6.32-21-server #32-Ubuntu SMP Fri Apr 16 09:17:34 UTC 2010 x86_64 GNU/Linux
[code]....
View 4 Replies
View Related
May 4, 2011
I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
View 8 Replies
View Related
Feb 3, 2011
So everytime I resume Ubuntu from hibernation, it remains black for a time then 2 messages on the screen appear for about 10 seconds before I can log-in:
Code: [ 0.556247] [drm:init_ring_common] *ERROR* render ring head not reset to zero ctl 00000000 head 02001000 tail 00000000 start 02001000 [ 0.556320] [drm:init_ring_common] *ERROR* render ring head forced to zero ctl 00000000 head 00000000 tail 00000000 start 02001000
View 3 Replies
View Related
Sep 2, 2010
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
View 3 Replies
View Related
Oct 2, 2010
I upgraded to 10.10. Now I want to install medibuntu. I have the repos added, but when I try to add the key-ring with the terminal it won't add. Can someone give me the command for that again?
View 7 Replies
View Related
Feb 5, 2011
logon will not recognize my password nor will key ring .
View 3 Replies
View Related
Jun 4, 2010
I'm using Ubuntu 10.04 Lucid -- I upgraded from Ubuntu 9.10 which also had kubuntu desktop installed.After entering my username and password in the user login screen, I'm prompted for my key-ring password even though my key-ring password and my user login password are the same. How can I have key-ring password prompt automatically use the password entered at user login?
View 2 Replies
View Related
Sep 22, 2010
I installed a couple of updates that the update manager said were important the other night and now I can't get past the default key ring password screen. Only the mouse works (USB); the keyboard has no response.I know the password but I just can't get the keyboard to work.
View 1 Replies
View Related
Dec 14, 2010
Because of a hard disk failure I had to buy a new disk and reinstall Ubuntu 10.04. Prior to the install I was running the live cd version of 10.04. When I connected to my wireless network and entered the password the key manager wanted me to enter a password to protect the network password. Now every time I boot up the system the network will not automatically connect. (It used to do this). Now I have to click on the network manager and select my network. When I do this I get the key manager asking for a password.
So how do I stop the key manager nonsense and get the network to connect automatically as it once did.
View 3 Replies
View Related
Jul 3, 2011
I recently installed UBuntu 11.04 and dual booting it with WIndows 7, I really like linux and considering removing W7 and only have Ubuntu But the problem is I can only connect when using an ethernet cable, when it comes to wirelesss, I type my password, yet a ring keep rotating and it never connects. My laptop is HP-G62
View 3 Replies
View Related
Jul 4, 2010
The new release of Opera 10.60 doesn't recognize the -notrayicon option anymore. If you had this option in your menu, then Opera doesn't start anymore and dies silently. You won't get an error message, and this error can keep you quite puzzled.
The solution is to remove the -notrayicon option from the menu entry. In opera, go to opera:conf and find the "notrayicon" option and disable it.
View 1 Replies
View Related
Feb 21, 2011
Is there any way to connect a Fedora 14 PC to a Token Ring LAN? I know I need to use the olympic driver for my card and I know how to configure it in an older version ubuntu, but I'm coming up totally empty on Fedora.
View 11 Replies
View Related
Jul 21, 2010
I wanna capture network packets from DMA ring buffer, just like netfilter. i wanna capture it from DMA, because i wanna get MAC address of I/O packets, so netfilter not included MAC address of out going packets because its on IP level and Ebtables is like that too. how i can capture network packets from DMA ring buffer.
View 9 Replies
View Related
Aug 2, 2010
I am having issues getting the modem it the dial-in server I have set up to answer on the correct ring. I have the /etc/inittab set:
Code: S1:2345:respawn:/sbin/mgetty -n 7 -x 6 -D ttyS2 yet I have to play with 'init q' and minicom to get it to answer on ring 7. Then a reboot destroys the setting and I have to go through the whole hassle again and it goes back to answering on the first ring.
This is not acceptable. This dial-in server is only a very back door into my network. It is only turned on when needed. Most of the time it is not powered up. When it is turned on it is by a non-tech person with out the ability to jump through the hoops to get it to answer on the correct ring.
Ideally I want this modem to just listen to the line after it stops ringing to check for a data signal and if it does not find it just hang up. If it finds a data signal then establish a connection and all that. That way it does not interfere with answering machine on the line. Google has yielded very little info about setting up dial-in servers. Modems are not used very much any more.
View 4 Replies
View Related
Mar 9, 2011
Can both token ring and ethernet be connected to same switch? If we can connect so, how can a switch able to differentiate them.
View 1 Replies
View Related
Oct 27, 2010
I am using the Dynamic Static version of Skype in Mint Debian OS, which uses pulseaudio.
Voice communication works OK but there is no ring sound in or out and test sound is grayed out.
View 2 Replies
View Related
May 14, 2010
Due to the fact that with pulseaudio it is impossible to change the microphone/speaker/ring devices in skype, I had to remove pulseaudio.
After that I can choose a device in skype, but the mixer does not work anymore. There is a way to have a working mixer without pulseaudio package or a way to choose audio devices in skype with pulseaudio installed?!
View 1 Replies
View Related
Nov 22, 2010
I had no 3D acceleration on my AMD system with RS690 IGP graphics. I'm using 64-bit install and desktop kernel, 2.6.34.7-05. Snippet from dmesg:
[Code]...
View 1 Replies
View Related
Dec 1, 2010
I would like to put a command to ring the system bell several times when a connection via PPP drops.
Where/how can this be done using bash?
View 2 Replies
View Related
Jan 2, 2010
I've just switched from XP to Ubuntu 9.1 on a relatively old computer (6-9 years?) yesterday, and everything worked like a dream. I've used my computer twice today and nothing seemed to be going wrong...but then came the problem. I haven't toggled with the settings too much since I'm still very new to Ubuntu, but whenever I log in with my password, the GUI doesn't automatically start up. I get the terminal in the right left-hand corner instead, and none of the fixes I've found so far have worked. I usually get some variant of an error message or my hostname doesn't exist.
I've tried:
startx
sudo apt-get install xorg
apt-get update
sudo apt-get install xserver-xorg
sudo dpkg-reconfigure xserver-xorg
sudo nano/etc/apt/sources.list
View 8 Replies
View Related
Mar 22, 2010
When I click on the Ekiga menu-item it seems like nothing is happening. So I went into htop and saw the process is running. When I start Ekiga from the command line, nothing happens as well. Then I tried starting Ekiga in debug modus with option -d 5. Still nothing showing up. When I call my VOIP number I can see a call coming in, however there is no ringing sound and no dialogue to pick up the phone.
Then I re-installed by 'aptitude purge ekiga' and then 'aptitude install ekiga'.
I am working on Ubuntu Karmic. The Ekiga version is straight from the repositories: Version: 3.2.5-1ubuntu1.
I hope someone has an idea what to try next.
View 1 Replies
View Related
Apr 16, 2010
using ubuntu 9.10 and wine 1.0.1 was able to install Delorme street atlas 2008 plus sucessfully but when I run autorun.exe the app. doesn't start only the first screen that says "creating controls connecting to components and then nothing happens.
View 3 Replies
View Related
Apr 30, 2010
I upgraded to 10.04 and my AWN dock won't automatically start even though the 'box' is tic'd and it's showing in the Startup Applications. I did lose all of my configurations as well after upgrading and had to reinstall everything on the dock.
Also, there are little numbers on the launchers like for Trash and Email that tell me how many items are in there. The Trash was easy to remove the numbers by right clicking and choosing the Preferences option. There was a place to disable that but there isn't one for the Email and those little numbers look well.
View 4 Replies
View Related
May 21, 2010
I just upgraded from 9.10 to 10.04. While it seemed to go fine, GDM won't start. (Instead the Plymouth bootloader just displays the splash screen continuously.) I can get in through a virtual terminal, but starting GDM via the init script does not do anything. I also tried this:
Code:
me@host:~$ sudo gdm
**
ERROR:gdm-settings-direct.c:157:gdm_settings_direct_get_boolean: assertion failed: (entry != NULL)
Aborted
I tried running sudo dpkg-reconfigure gdm, but this did not change anything. Logged in from the virtual terminal I can run startx and get the desktop, but obviously I would like to have the login manager working.
View 1 Replies
View Related
Apr 11, 2011
This will be my first posting here. Please forgive me for not posting this issue under the right place on the forum. I highly ask to the mod/admins to move this post to the correct location if needed to be, or let it continue as normal. My problem here is with this software blender 2.56a, I'm running Ubuntu 10.10. 64bit This version of blender worked just fine for me since it updated to my computer. But right after finishing an complex render, blender crashed and will not start up again.
Every time I click on the icon it just keeps flashing up and crashing down. So I went to the main blender site, and downloaded one of their stand alone version of the 2.56a. I ran it and it works just fine.
I tried reinstalling blender 2.56a under Synaptic, but no use. I'm out of ideas, I want this software to run like it use to. Again, It use to run without any problems, but just under one hard render it crashed, and Now it wont launch again.
However, I did mange to get my project to render just find under the stand alone. If any one needs some sort of debugging file, or information of some kind. I would then need to know how to re-chieve it..
View 2 Replies
View Related
Mar 9, 2011
when we type mpd & to bring up ring on a single nodethe output is a random number,like this:>>mpd &>>[1] 5450anybody knows what is this resulting number?ps: i dont think its a port number because when i type >>mpd -eits prints out the port number mpd takes
View 1 Replies
View Related
Jan 8, 2010
I have a strange problem on firefox. Homepage doesn't appear when I start firefox and bookmarks are missing. The strange part is that if I run firefox as superuser everything works fine.
ps: I use ubuntu 8.10
View 2 Replies
View Related
