I just installed Xubuntu on my old iMac G3 and I booted it and when I try to log in it says "Authentication Failure" I'm 99.9% positive I'm using the right username/psswrd, does anybody know how to change it or over ride the login part all together?
View 2 RepliesI have an early 17" imac G5 PPC, only 512mb RAM. Been looking at the PPC linux distros available, and xubuntu 10.04 looks good, does anybody run here on an old Imac? Will just be a backup pc.
View 7 Replies View RelatedI have eight iMac G3's that work. I've never had a mac before, and I'm not interested in anything the mac OS has to offer. I want to totally delete it, and put JUST xubuntu on these computers. I know nothing about Mac, except I got these, and they have pretty colored housings. I've tried using the 'c' and 'apple+c' commands to get this to boot from the xubuntu cd, but it doesn't have any effect. The thing just continues to load OS9.
I'm seeing from all these threads that everyone is pretty much dual booting, or multi-partitioning the hdd. I do NOT want to do this. Is it possible to format the drive completely, so that it is utterly blank, and then install xubuntu? Am I going to have to get new hdd's for them? They all work just fine, no problems except the software is so old that you can't do anything with it but use post it notes.
i installed Xubuntu on my system having a dual boot with Xubuntu and windows xp but when i select to boot on Xubuntu it freezes and gets a message saying that the file hal.dll in system32 cant be found. Before showing me this message i tryed to uninstall the Xubuntu inside from windows xp because several problems showed up after installing Xubuntu. I can boot on windows xp but i cant boot to xubuntu and cant uninstall xubuntu.
View 1 Replies View Relatedmy imac g3 power pc screen goes blank and the power button goes orange after Xubunto loads, but the computer is still running, how do I fix this problem, if you have any information please be very spesific I have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if I hit enter but the screen still stays blank)
(xbuntu version -xubuntu-8.10-alternate-powerpc)
(system informaiton...
(powerPc G3 266MHz/512k catche/32mb/6gb HD/24x CD-ROM/rage Pro/6MB SGRAM)
This is my first thread so bear with me. I have an Apple ibook 3G with a 500mhz ppc processor and 384MB of Ram that used to run OSX 2.8 but I am trying to install linux on it. I want to install Ubuntu or Xubuntu on it because I have been a Ubuntu user for a couple of years and I love it. But when I tried to install them my screen does funky things. The screen only fills up part of the screen and then there is like a partial mirror image of the screen on bottom of that screen and i think its something to do with the graphics config because I installed Yellow Dog Linux on it and it worked for a while and then does the same thing so I know its not the screen its self. I hope to get a few pics of it soon. But I was wondering if anyone has had the same problem or knew how to fix it.
View 6 Replies View RelatedI just installed Xubuntu 9.10 on my iMac and it works perfectly...except for one thing. It is stuck in 8 or 16 bit color and I can't find a way to make it millions of colors. I've tried using the xorg.config...
View 1 Replies View RelatedI have been given an Apple Ibook that wont boot
View 9 Replies View RelatedI was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg
slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager)
xfce4
xfce4-goodies
xubuntu-default-settings
bcmwl-kernel-source
aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code:
http://ubuntuforums.org/showthread.php?t=1155961
post regarding a "Ubuntu-Desktop-Minimal"-type system.
I'm having some trouble installing Xubuntu on an old Compaq PC with 512 MB RAM. The Live CD installs without a hitch, but when I restart the system to boot from the hard drive it locks up just after POST
View 1 Replies View Relatedi tried to install xubuntu on my desktop using wubi..it instaled and everything when i tired to boot xubuntu it said
Code:
Gave up waiting for root device. Common Problems:
-Check rootdelay=(did the system wait long enough?)
-Check root=(did the system wait for the right device?)
-Missing Modules (cat /proc/modules; ls /dev
ALERT! /dev/sdb3 does not exist. Dropping to a shell!
okay now when i try to boot window$ vi$ta and re Install WUBI window$ cant boot either
I've re-installed Windows and now can't boot xubuntu 9.1. I've looked at: [URL]. I did the the fdisk -l and tried mounting each of the partitions but I couldn't mount sda4 which I think is the partition that my xubuntu is located on. A clue that this is the partition is that it is the only one of type extended as I saw in gparted. It was also the only one apart from sda5 that I wasn't able to mount and sda5 I think was an old USB partition. Anything else I could try or are you going to need the output of "fdisk -l" to get a fuller picture.
View 3 Replies View RelatedThe harddrive of an old laptop of mine recently died. Until I can replace it, I would like to use the xubuntu live-cd. However I would also like to be able to install some additional packages and change some settings, so it would be great if I could make it persistent. I know that it's possible to install to an usb-pendrive, but the problem is that the laptop isn't able to boot from usb-devices.
Is it possible to install xubuntu to usb, but boot the system wiith the live-cd? Or is there another way to use an usb-pendrive to keep some settings/packages?
I'd like to change the boot splash screen from the current 'Xubuntu' text in white on a black background.Making changes in Settings->Xfce 4 Setting Manager->Session and Startup has had no effect, and Startup Manager does not display an option to change the splash. I feel I'm missing something obvious here, but where should I be looking?
View 1 Replies View Relatedgot a bit of a strange and probably difficult issue. I recently repaired a friends pc (WinXP) and felt inspired to tinker with my old 98 system. First I'm trying to find out how to dual boot Win98se with any distro of Ubuntu.
The system's sprecs are:
Gigabyte GA-7IX f4a motherboard
AMD slot A 900Mhz thunderbird
384MB ram (3x 128MB)
[Code]...
I was able to get xubuntu 6.06 to run and even installed, but can't figure out how to dual boot. I would prefer 8.04 or later since I am more familiar with those ones.
I have a Dual Boot system set up that i need to be able to deploy to a dozen identical computers in a lab envrionment. from a linux server. In order to do this i will need to be able to clone the MBR, Partition Table, and all the data.
View 1 Replies View RelatedI can't get Ubuntu 10.04 to boot for install (to my desktop), it displays the logo then hangs for about a minute and displays the alert dialouge saying "Boot disk error."I've tried multiple CD-Rom drives, burned from multiple computers, with both the desktop and server downloads. I'm down about 10 CDs and 2 DVDs here I've checked their integrity (md5) as well as checked the disk integrity from another computer (laptop) and everything passed. I got xUbuntu to install effortlessly, so I don't know what's causing the problem for Ubuntu. I can even look at the contents of the Ubuntu Server CD from within xUbuntu -- so, I know the disk really should work.
My system specs are pretty basic:
2 x Xeon 2.0Ghz
Tyan S2720 Motherboard
2 Gig (4x512) ECC PC266 RAM
[code]....
why xUbuntu worked and regular Ubuntu won't, and/or maybe what I can do to fix this?
Does anyone know how I can get xubuntu to boot up using the glint video driver instead of vesa? I am trying to get it loaded on an older machine and a previous version of ubuntu worked using the glint driver but the latest version of xubuntu (10.04) is using the vesa driver. Which is not working for me. I have tried ubuntu, xubuntu and lubuntu all version 10.04 and neither of them has worked. They all boot up into a terminal window (no GUI).
I tried creating an xorg.conf file and added a line specifying the glint driver. After doing that and trying to startxfce4 I get an error saying that it cannot load the glint module. Unfortunately that machine has no internet connection either. I guess it hasn't recognized my wireless card either.
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed.
View 1 Replies View RelatedI have an 8gb USB Flash Drive. I am trying to make a Xubuntu 11.04 boot disk from it. I have done this once before with Ubuntu, but not Xubuntu. The problem is that when I go into the Startup Disk Creator, I get this error and the process stops. This is what the Flash drive file structure looks like after the process stops.
View 3 Replies View RelatedI just installed Xubuntu 11.04 via wubi. Whenever I would attempt to do a normal install, the graphics would seem to crash and the screen would become distorted and basically just blocks of black and white. So I tried to do it in graphics safe mode, which succeeded. However, now I cannot start the Xubuntu GUI, and I get the error message "Display not found".
View 1 Replies View RelatedI try to boot the live CD and try xubuntu without installing, and my computer just hangs at a black screen, cuts off, then goes black and repeats. I also tried just installing with nomodeset enabled and it seemed to install fine, but it did the same thing as it does with the live cd, GRUB wouldn't even load... the computers specs [URL]
View 3 Replies View RelatedI had been using Xubuntu 9.10 successfully for some time. Recently, however, I tried to boot Xubuntu, and instead of reaching the login screen, a "GRUB" interface appeared. The title was "GNU GRUB VERSION 1.97~beta4"
Below that, there were a few instructions describing the use of the Tab key and a blank command line interface beginning with "sh:grub7". Before this started occurring, my computer would turn on and then display a menu to choose the OS. If I selected Xubuntu, a few lines would flash by, and the login screen would appear. My computer is a Dell XPS M1530 laptop. The operating systems installed are Windows Vista Ultimate and Xubuntu 9.10. The Xubuntu was installed using a Wubi installation.
As far as I remember, I did not make any changes that may have caused this. The only significant event that did occur was a power outage, but my computer was not plugged in nor on at this time.
If everything works normally, how would I boot Wubi Xubuntu from the GRUB interface? Are there any other solutions to this problem?
How do I install SDL (and other libraries) onto my dual-boot (XP/Xubuntu) computer? With only what came on the Xubuntu disk, I am able to play Oolite at what seems to be 1000 FPS, and Torcs at about 70 FPS.
View 6 Replies View RelatedI have an old laptop, and am a basic linux user, but this install is crazy. I know that I have to have acpi=off to work, and got Linux Mint 7 installed from the live cd but want Xubuntu. The Xubuntu 9.1 live CD works fine as long as I put the acpi=off parameters in the boot string, and I check the additional options just to be sure. But after install I cannot even get into the grub, it says grub loading for a split second then blinking cursor
View 2 Replies View RelatedI have freshly installed Xubuntu on my HP compaq nx9010 laptop and grub doesn't boot system. Only minimal BASH-like line scripting is supported. How can I fix it?
View 9 Replies View RelatedI am trying to boot a cd on an iMac G3 and I can't get it to boot. (hence the question)
I have tried pressing the 'c' key, the option key, the control key, the apple key, etc, etc, etc.
I have looked around Google and it showed me an old thread on the forums the guy figured it out but he never said what he did.
I downloaded ubuntu not knowing it was totally take over my Mac. I'm nervous it may have deleted everything off my memory and now idk how to get it back! When I start it up it boots with ubuntu only! How do I get it to boot up the Mac os? And did installing this delete everything from my harddrive/partition!?
View 6 Replies View Relatedso i followed the guide to installing ubuntu on my mac i have an core 2 duo processor so i got 9.04 X64 put it on a cd and the cd wouldn't boot at all, so i tried again, and again, and re-downloaded.... not i have tried 10.10 X64, 9.04X64, 9.04X86 and none of them boot past the screen that asks me if i want to install it or whatever, i tried checking for defects on the cd but that didn't even boot.
View 3 Replies View RelatedI don't want to dual as I don't want to screw up my computer. I have a PowerPc mac.
View 3 Replies View Related