Ubuntu :: Xubuntu Black Screen / Blank Screen Using Live CD?
Oct 9, 2010
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
View 1 Replies
ADVERTISEMENT
Mar 25, 2011
I try to boot the live CD and try xubuntu without installing, and my computer just hangs at a black screen, cuts off, then goes black and repeats. I also tried just installing with nomodeset enabled and it seemed to install fine, but it did the same thing as it does with the live cd, GRUB wouldn't even load... the computers specs [URL]
View 3 Replies
View Related
Mar 18, 2011
Apology for dual post I realized was in wrong place.Created verified 11.3 live CDInserted, restarted, welcome screen, choices next, I choose installation.Kernel loaded then black blank screen guess you call it a freeze upWindows 7 Home Premium 64-bit Edition Partitioned plenty room
View 9 Replies
View Related
Jan 18, 2010
my imac g3 power pc screen goes blank and the power button goes orange after Xubunto loads, but the computer is still running, how do I fix this problem, if you have any information please be very spesific I have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if I hit enter but the screen still stays blank)
(xbuntu version -xubuntu-8.10-alternate-powerpc)
(system informaiton...
(powerPc G3 266MHz/512k catche/32mb/6gb HD/24x CD-ROM/rage Pro/6MB SGRAM)
View 9 Replies
View Related
Apr 5, 2011
ive just installed Xubuntu Desktop on to my computer, it runs fine, everything loads and so on. but after i log on the bottom 3rd of my screen is completely black
View 1 Replies
View Related
Nov 28, 2010
I installed Xubuntu (Karmic 9.10) several times on an old iMac G3 with powerpc processor. Previously I had installed versions as 6.06 and 6.10 succesfully. But no luck this time. All installs were succesfull if alternate cd's were used.
The problem is that when i boot up i see the bootloader 'yaboot' and after that shortly the mouse logo from Xubuntu. After that the screen turns black and the indication light from the powerbutton turns from green to orange, this means no signal (i guess).
I assume that my screen resolution is wrong and cannot be displayed, the Mac uses 1024x768 if i am right.
My question is : How to access any configuration file to change resolution as I believe is the problem?
Edit: Perhaps there is a way to access command line to change config files.. ? Or using a live CD, but this computer is low on memory and has a hard time using live-CD's.
View 1 Replies
View Related
Mar 10, 2010
I am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs
ASUS A7N8X Mother Board
AMD Athalon XP
1GB ram
View 5 Replies
View Related
Dec 24, 2010
I just immigrate from Windows XP to Ubuntu 10.10 ( Ubuntu as OS Principal no Dual Boot ) I have a such problem with SKYPE, I talk with someone who had a webcam and after 5 - 7 mn it crash and the menu hide and everything even desktop background, and it shows a blank black screen I don't know what I have to do, I'm sick of tired of windows' blue screens
View 2 Replies
View Related
Jul 9, 2011
so I had a black screen when I was starting up my PC instead of the normal Ubuntu with the dots underneath. I have Ubuntu 11.04 on a dual-boot with Windows Vista. It would still boot normally and work fine but I wanted it with the Ubuntu and dots etc.
After looking at many sites to try and fix it that didn't work I found this: [URL]. That didn't work so I found this next: [URL]
I did what it said by removing
Code:
vt.handoff=7
Then when rebooted I got the Ubuntu with the purple background and dots but the boot would hang (always when all 5 dots were orange). I booted into recovery mode and I chose "File System Check" on reboot and it would get to the bit with 5 orange dots then it would check disk for errors and go to login screen then work fine.
If I added vt.handoff=7 it would boot normally with a black screen again.
RESULTS.txt is from when I had vt.handoff=7 removed and I was in Recovery mode>resume normal boot>"sudo bash ~/Desktop/boot_info_script.sh".
RESULTS1.txt is from when I booted up with the disk check and was in Terminal.
EDIT: Also just recently I'm getting a lot of boot hangs, freezes (where everything on screen will freeze and if I was playing music in Banshee it repeats the last 3 seconds until I hold down button on PC), and it will sometimes just restart randomly. Not sure if that related or not...
View 9 Replies
View Related
May 31, 2011
I am installing 11.04 on a Gigabyte E7AUM-DS2H with an onboard GeForce9400. I'm trying to turn this into an XBMC htpc. I'm not using xwindows or anything like that. Going straight to console for now. I'm experiencing the GRUB Black/Blank screen. I just don't know what else to try...
1. I've changed the kernel boot options, i.e. nomodeset
2. I've toggled the GRUB_GFXMODE=640x680 line
3. I've remembered GRUB-UPDATE
4. I can get into GRUB menu using SHIFT at bootup, messing around with settings and CLI there
5. I started with default nvidia drivers (not good), and then installed nvidia-current - that works better.
6. At the blank screen, I can hit ALT-F1 into console/tty fine.
7. If I use nosplash --verbose, I get a long wait with a blank screen, then the last bits of the bootup log and the login prompt.
8. And stuff I've forgot I've done....
Now what I really can't understand is that I have XBMC installed AND working beautifully. I can set XBMC to autorun with no trouble at all. It's just the period between bios and XBMC that it all goes dark. When I quit XBMC, I get a blinking cursor, which I can F1 to the console. What is it with GRUB??? What am I missing? Why is this so difficult? I COULD live with it, but its just not right, and I want to get it right.
View 6 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Feb 27, 2010
I recently got a new laptop and am trying to install Ubuntu 9.10 on it. I have installed it on my two other computers without any problems, but there seems to be a hitch with my new one. So I boot up using the live CD and then am presented with the option to test Ubuntu or install it. If I choose either of these the screen just goes blank. If I go with the first option of testing Ubuntu before installing, I can hear the intro drumbeats but the screen is still blank.
I have searched in some forums and tried some people's advice, like pressing Ctrl+Alt+- or trl+Alt+Backspace to change the resolution and restart X windows, respectivley. But it doesn't seem to work.
I'll list my laptops specs just in case my problem has anything to do with them:
MSi
Windows 7 Home Premium 32 bit
Intel Core i3 M 330 2.13GHz
4GB DDR3 RAM
Intel Graphics Media Accelerator HD
View 9 Replies
View Related
Sep 5, 2010
ive downloaded the Ubuntu CD from the official website and burned it twice, once one a dvd and the other on a normal 700MB CD-RW.in both, the screen went blank after the loading part before the main menu (installation, try it blah blah..)what should i do?btw i use a windows XP and here is my hardware details...sapphire hd 5770 1gb, 4 gb of ram,Intel Core i5- P55 .5 ghz, i think that its enough for the minimum of the ubuntu isnt it?
View 4 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Sep 8, 2010
During the upgrade process, all the files appeared to install correctly and the computer rebooted as expected. It then showed the openSUSE splash screen but eventually that went dark and there was no display. Rebooting again did not help. Hitting Ctrl+Alt+F1 results in a corrupted display. I'm guessing this is an issue with the video driver? Not sure how to troubleshoot when I can't even get a terminal window open!
HP Pavilion dv6500 laptop with an nVidia GeForce 8400M GS.
View 9 Replies
View Related
Mar 19, 2011
I've been trying for some time to install Ubuntu 10.10 or variant on my Toshiba C660 with ATI graphics card.I seem to keep hitting a brick wall when attempting to run a live disc and end up at a blank screen. I get this result despite tryingots of different installation discs. Ubuntu 10.04 seems to run with no problems.I believe the problem is to do with the graphics card from googling and have tried various changes to the live cd/dvd boot options (set nomodeset & radeon.modeset=0) but with no success
View 1 Replies
View Related
Aug 16, 2011
I have just received my new laptop - a Thinkpad x121e, with Intel (Core i3).
I am trying to put ubuntu on it, but i am having some problems with the 64 bit live USB.
When i run the USB i get i get a GRUB-looking screen, with options to:
Quote:
1. Try Ubuntu without installing
2. Install Ubuntu
3. Check the disk for errors
Wanting to repartition my hard drive (using GParted) so that i can dual boot, i Quote:
Try Ubuntu without Installing
, at which point the screen goes blank and nothing happens. I am then forced into a hard reboot. I get the exact same result when i pick
Quote:
Check the disk for errors
from the GRUB-like screen
To check the live USB, i tried it on my old laptop (32bit, Celeron M). When i did so i got a purple screen with an image of what looks like a keyboard and a man at the bottom, and then a message telling me to try a kernel which matches with my machine's architecture.
I then tried a live USB with 32 bit ubuntu and the live USB works fine - i am sending this email from this live instance running on my new Thinkpad. The same can be said for a 32 bit Mint live usb which also worked on the Thinkpad.
So i am not sure what is going on. If anyone could tell me why the 64bit live USB is not working, it would be great as i'd like to get it up and running. The only thing i could think of was that i have downloaded the amd64.iso, and this is an intel machine. Having said that i see that all the sites on the web suggest that this shouldn't make a difference (if it does, where might i get an 64 bit version for intel). In addition i am not sure why, if this was the problem, my old celeron laptop brings up the error message while the new machine just hangs.
View 3 Replies
View Related
Mar 3, 2011
I've used Mint a couple times to try to recover my old computers, but I only worked with it as long as I needed to. Now, I'm going to give Ubuntu a try so I downloaded Ubuntu 10.10 x64 and burned it to a DVD. When I try to boot it up with the DVD in, it does the startup screen that I'm used to before it loads the actual OS, and then it just gives me a blank screen. The only way to exit is to shut down the computer
View 1 Replies
View Related
Oct 14, 2009
I have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors.I have two Geforce Fx3500 card in the machine.
View 10 Replies
View Related
Oct 14, 2009
I have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors. I have two nvidia Fx3500 card in the machine. I have tried the 173, 185 and 190 driver - same thing.
View 2 Replies
View Related
Apr 30, 2010
I want to make a clean install of 10.04 instead of just upgrading from Karmic.However when I run the boot cd I get the new Ubuntu boot up screen (with the five dots) but after a while I get a black screen and at the same time the cd stops running in the drive.The only thing I can do is pressing down the start button until my computer shuts down.I do get the menu to choose to run the live cd or make a new installation, but whatever I choose, I end up with the black screen.
I'm trying to install on an older IBM Thinkpad R50e, with 500 mb RAM so I figured that it was simply just too old to run the new ubuntu. The strange thing however is that the cd is actually running fine from within my Virtual Machine. This I don't get
View 9 Replies
View Related
May 25, 2011
don't have the knowledge to know what to do next.I'm trying to run the live disc of 11.04 as I want to dual boot with it. I've checked the MD5 and checked the disc for faults and they're ok but I just end up with a black screen. The graphics card is ATI 4550.
View 2 Replies
View Related
Sep 1, 2011
I have a 8.2 MBP with a 1680x1050 screen and a 6490M graphics card. I'm trying to boot from a usb stick ubuntu live. I'm able to get to the ubuntu menu, asking to install or start live boot, but when I select live boot I get a black screen( backlight is still on but entire screen is black). I've waited at that screen for quite some time with no luck.
View 2 Replies
View Related
Jul 14, 2015
When I mount Debian 8 live into VMWare Player 7.1.2 64bit, it works awesome with and without graphics acceleration enabled i.e I can get into the desktop and all that.
But, when I installed it, the reboot is just a blank screen. I am not sure how I can proceed from now.
I am on Windows 7, 64bit Ultimate.
View 10 Replies
View Related
Jul 1, 2010
I have been trying to install openSUSE on a dell Latitude XT all day, and every time I tried to live boot, I got a blank screen. I finally decided to do a text install and I got it installed, but now I get the same result from booting off of the splash screen.
I can boot into text mode fine (still) but for whatever reason, it bombs as soon as I tell it to load the GUI. I have a 1.2 GHz Core 2 Duo, 3GB RAM, and an ATI mobility chip (2000 series, maybe?) I had the same problem with Ubuntu, and since I like openSUSE just as well, I figured I'd try it because I at least could do a text install from my liveCD.
View 2 Replies
View Related
Apr 29, 2011
After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.
View 1 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
Oct 21, 2010
My ubuntu desktop died yesterday. I rebooted my computer in like 1 month and after grub, the screen is all black and it stays there... forever. So I decided to see if the problem persists or not when I completely upgrade my ubuntu to the latest version. So I downloaded the latest ubuntu iso from the site, burned it, and booted from CD and I see several selections to choose from the menu list. The second one was "Install Ubuntu". What I'm worried about is I don't know whether selecting 'Install Ubuntu' will erase all my previous data, or there will be an option to upgrade Ubuntu without erasing all the data. Is it safe to install from the live disk? Will my data be safe? Is there any way to upgrade my Ubuntu on the HD to the latest Ubuntu from a live disk?
View 3 Replies
View Related
Nov 18, 2010
I've been installing Linux Mint with OSX on a bunch of iMacs, and its been working perfectly excpet for one of the iMacs. The screen will just go black when I boot from a live CD, but I can hear the login sound play. It's strange because all of the other iMac's run the live CD just fine. What could the problem be? I don't know what I can do to troubleshoot this problem.
View 3 Replies
View Related
Sep 28, 2010
i have installed xubuntu desktop on my Ubuntu PC. But now the login screen and the bootsplash screen are showing Xubuntu logo etc . How do I fix this?
View 3 Replies
View Related
