Ubuntu :: 10.4 Hangs On Boot?
Mar 6, 2011
I've just had the power cut out while downloading a bunch of updates for Ubuntu 10.4
I haven't updated to the latest release because I'm lazy and have slow internet.
Anyway, once power had been restored, I turned my desktop on to find that my install will not actually load. It boots up and goes to the purple 'Ubuntu' screen with the orange dots, and just sits there (for about 15 minutes so far) without any activity on-screen.
I'm running Ubuntu 10.4 as I said above, and I'd really like to get a solution that does not include 'start from a fresh installation', since I've had to really wrestle with this install to get my wireless adaptor (USB) and wacom tablet working properly.
View 1 Replies
ADVERTISEMENT
May 25, 2010
I'm running Ubuntu 10.04 and a small Windows 7 partition (cuz I can't get Ubuntu to run my MSI TV@nywhere plus card but that's another issue).I can log into Windows fine. If I choose Ubuntu, however, the boot process will go thru a few screen flickers. Then one of two things happens:1) I get a scrambled up pixelated image (not sure what it is) for about 3 second, then it goes into the login screen and I can log in normally.2) I get the scrambled up pixelated image and it hangs. This happens about 4 times out of 5 when rebooting.
I do have an nVidia card and a beta driver (they published it the 21st, I believe, of this month) but this happened long before that. It's happened ever since I installed any of the drivers (I've tried a couple different versions, hoping to fix this) for my card.
My system is a frankenputer:
Phenom II quad core 3.0 cpu
nVidia GeForce BFG 6600
4G DDR3
500G drive
Note: I do have 3D rendering when I finally get into the desktop. Everything works great, except that when I'm playing my mmorpg, Regnum Online, it freezes the entire computer and I have to reboot (not sure if that has anything to do with it or not).In case it's needed, this is my grub:(Second note: I'm sorry for the length of the post but I don't know how to upload documents/files to show)
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
[code]...
View 1 Replies
View Related
Aug 28, 2010
When I boot up my laptop whith memorycards in the slots the boot hangs at "Wating for /dev to be fully populated", "Activating swap" or somewhere in between.If I take out the memorycards so the slots are empty, the laptop boots just fine...Its a CFCard and a SDcard in a PCIMAslot.Does anyone have a clue?Its not a big problem just very annoing to have to take out the memcards all the the time.
View 4 Replies
View Related
Apr 20, 2010
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
View 9 Replies
View Related
Aug 26, 2010
I upgraded from 8.04 to 10.04 LTS. Now when booting it hangs and drops me to a initramfs shell. This is a scsi machine with 3 drives. The error I get before dropping to the shell is that the drive with the uuid in menu.lst does not exist.If I type "exit" at initramfs, it finishes booting in a couple of seconds. The uuid is correct and maybe this is a timeout error of some kind. This is a machine that I would want to reboot without having to walk over and type "exit" at the initramfs prompt.
View 3 Replies
View Related
Oct 11, 2010
I installed Maverick Meerkat today, and it was working great on the first boot (which is when I updated the system...). However, since then, it won't boot up. When I looked at the output during boot, I noticed that it hangs when it gets to:
Code:
floppy0: no floppy controllers found
After that, the hard drive access light on my laptop turns off and it just sits there.
View 9 Replies
View Related
Jan 5, 2010
Ubuntu server hangs when I boot with a wired Ethernet connection. The last thing I see in the console is code...
I have no problem when I boot to a Wifi connection even when Samba and openssh-server are installed. I see the same sequence of lines in the console as I reported initially (including Reloading, Restarting), but then the output continues with
* Starting the Winbind daemon winbind
Both the wired and wireless connections use dhcp. Obviously, I installed the OS using a wired connection, so it worked reliably once. I'm stuck.
P.S. I tried dhclient -r before rebooting. The machine did not shut down correctly and when I forced a reboot it appeared to hang at the usual place. However, after a long delay it proceeded to boot. Perhaps I am observing a delay due to a very long timeout. I will try another reboot now and check again in the morning.
View 2 Replies
View Related
Jun 17, 2010
I am looking to speed up my boot time; it is currently around the 2-2.5 minute mark from Grub to desktop (including about 15 seconds at the login screen while I type my password).
I have forced ureadahead to reprofile, and have rebooted a few times until the boot time is fairly stable/consistent.
No xorg errors and only one warning ((WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.)
However, dmesg reports the following:
Code:
...
[ 1.121369] Freeing unused kernel memory: 656k freed
[ 1.121926] Write protecting the kernel text: 4676k
[ 1.121977] Write protecting the kernel read-only data: 1840k
[ 1.146159] udev: starting version 151
[Code].....
View 9 Replies
View Related
Jul 3, 2010
I think I've got a graphics/sound compatibility issue--both are onboard, but have no idea what to do. 10.04 will run in recovery low-graphics mode but won't load otherwise.
I have an old Gateway MX6030 / MA2 from 2005, 1.4Ghz Celeron, 1024 MB RAM. It had 9.04 on it. I got it out, thinking I could use it to store and remotely access research files for Mendeley and backup other data from my primary machines. I was running into wireless connectivity programs, so rather than fix it I figured I'd upgrade to through to 10.04 and plugged it into the router. 9.10 was a little choppy with the sounds when booting up, but worked. 10.04 won't boot properly. It gets to the Ubuntu splash screen with the little dots, which all turn red, then goes straight to a grey screen. The hard disk stops thrashing, and that's it.
If I hit ESC to bring up the grub menu, I can enter recovery mode and use the low-graphics startup to get into 10.04. Sound is still choppy on startup, but wireless, video, etc. all work. I tried to use a USB bootdisks with both 10.04 and Xubuntu 10.04 and got the same issue. The Ubuntu live boot can get to the menu but freezes after I make a selection. Xubuntu just brings up a low-res "XUBUNTU" image and freezes right after that. Hard disk stops turning, and the machine stops accessing the USB disk. Nothing happens.
Is there a way I can access 10.04 low graphics as the default boot? Is this a driver issue? This is a beginner question, obviously, and really, my goal here is just to be able to access the machine remotely so I can keep files for Mendeley in a single place rather than across two machines and three OSes. I don't know if I have the time or patience to learn how set up another machine as an FTP server to try and install through that route.
View 1 Replies
View Related
Jul 25, 2010
I just recently installed ubuntu 10.04 and it works great! I got it to work with both of my printers, scanner, and zune! The problem is occasionally when I boot up ubuntu it stops and displays "[drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)"
View 2 Replies
View Related
Oct 14, 2010
With Mythbuntu 10.10, the Live CD hands before it can fully boot the OS to a GUI. I'm running an IBM ThinkCentre (P4 2.6Ghz, 512mb RAM) with an NVidia 6200, and I'm using an HD LCD TV for the display.
I've tried to use nomodeset but that hasn't helped it boot. I've tried disabling dmraid also but I end up getting this error: 'General Failure Mounting File Systems'. I've had no such problems with the previous 3 versions of Mythbuntu. Although I didn't have this TV when I installed those ones... could that be the issue perhaps?
View 1 Replies
View Related
Oct 22, 2010
I have ubuntu 10.04 installed on my MacBookPro7,1 (dual boot with reffit). Everything works fine. Today I closed my laptop and open it later again and saw a black screen with a blinking cursor. I was not able to send any keys to it. So I powered down (off button) it.
After Booting It I saw some kernel message, no errors, and then it stops and everything is freezed. Again no keystrokes can be send. The last kernel message is something about scsi. I tried to remove the "recordfail" in the grub2 menu but it doesn't help.
View 1 Replies
View Related
Dec 8, 2010
I loaded Ubuntu onto my USB using the USB installer, and then attempted to create a persistent drive (>4GB) according to the link :http://www.pendrivelinux.com/create-...per-partition/
But when I boot from the USB it hangs. I am new to Ubuntu, so I cannot give a lot of details.
When booting from the USB, it goes to the setup screen where I select boot from the USB. A list of commands appear on the screen (it's too quick,to read) and then it arrives at the intro screen with the Ubuntu symbol. On this screen it hangs.
Any suggestions on how to fix this.
View 4 Replies
View Related
Dec 25, 2010
I wrote the ISO to a USB drive I had using the Universal USB Installer, and I put it into my new Acer Aspire One D255 netbook, and set it up so that it would be the first thing it booted to. I got past the ISOLinux loading screen, and now it's just hanging at a black screen with a bit of text:
Intel(r)PineView PCI Accelerated SVGA BIOS
Build Number: 2001 Accelerated PC 14.34 03/01/2010 02:34:31
DECOMPILATION OR DISASSEMBLY PROHIBITED
Copyright (C) 2000-2003 Intel Corp. All Rights Reserved.
Anyway, it's just sitting there. The USB stick isn't doing anything, it's not flashing or jittering, it's just slowly pulsating like it usually is when it's not doing anything.
View 4 Replies
View Related
Mar 10, 2011
So I tried installing the nvidia drivers for my GeForce 330M using Jockey after I first installed 10.10, but it did not make it so my desktop was not bigger than my screen. So, I blacklisted nouveau by creating a text file which had in it:
blacklist nouveau
options nouveau modeset=0
Then I saved the file as disable-nouveau.conf, then chown(ed) it to be owned by root, and moved it to /etc/modprobe.d/
I then installed the driver for my nvidia card, and everything worked perfectly. But after installing the updates listed in the update manager, my computer won't even boot to the GUI desktop, it just hangs. I can still access the command line, but when press <ctrl-alt-F7>.
All I see is this:
fsck from util-linux-ng 2.17.2
//dev/sda1: clean 170760/29409280 files, 5091535/117623296 blocks
*Starting AppArmor profiles
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
*Setting sensors limits
speech-dispatcher disabled; edit /etc/default/speech-dispatcher
*Starting the Windbind daemon winbind
And that's it. It just hangs there. Like I said, I can still access the command line with <ctrl-alt-F1>, but I have no idea how to get Gnome I guess to display?
View 1 Replies
View Related
Apr 30, 2011
I was running 10.10 until this morning when I upgraded to 11.04.{Some minor grub complaints in the install but mainly due to me having customised the entries.}I rebooted and went to the new installation, it goes purple and says Ubuntu 11.04 with dots going across, then it hangs and goes to the background text and the last thing it says is "Checking Battery State.I'm on a desktop, so I'm sure the battery thing isn't an issue, it's probably something before or the next command that freezes it.
I booted into recovery mode repaired grub (no change) then went into failsafe graphics mode and it worked ok.My guess is that because failsafe graphics was ok, it might be to do with the graphics driver (ATI HD6970 fglrx driver) but I've no idea.
View 9 Replies
View Related
May 14, 2011
When I boot Ubuntu 11.04 it goes as far as showing me the OS options (I dual-boot with Windows7) and then what should be the login window. However - here it displays the mouse and nothing else. It just hangs. I can hit ALT-F1 and get a shell. I login and everything works as expected except X isn't running.
BACKGROUND: I tried to upgrade from 10.10 when (mid-upgrade) my computer turned itself off (suspect housemate unpluged it by mistake and then it ran out of battery). When I turned it on again, it refused to boot, complaining that the / drive was not there. After a bit of digging around I found that it was actually mounting / with read-only permissions. After remounting it with read/write permission I was able to continue with the upgrade. HOWEVER, I never managed to connect to the wireless from the command line (I tried all sorts, sudo iwconfig wlan0 essid "eduroam", sudo dhclient wlan0). Since it hadn't finished to download the new packages, I don't know what it did (presumably installed the ones it did have). Anyway, after doing this I rebooted and everything seemed to work - I logged in and (using update-manager) did a partial upgrade which seemed to work. The only problem was that it was now complaining that nautilus was not configured and for this reason it could not update a package called libglib2.0 or something like that. I tried to repair broken packages/reinstall nautilus etc nothing worked. I then rebooted (I don't remember why I thought that would be a good idea). Since it hasn't given me a GUI login window again. It just hangs, like I said.
View 4 Replies
View Related
Aug 21, 2011
I have an updated Ubuntu server and had problems with the windowmanger. Now treated the system and now it will not start anymore.
Symptom:
Starts up to "Checking battery state... // Running local boot scripts (etc/rc.local)
than it hangs.
> which logfile should I look in?
[Code]....
If I start X with startx a gray screen with a mouse X comes up, but there is nothing. No keystrokes or mouse buttons effects anything.
View 1 Replies
View Related
Sep 1, 2010
My old man wanted to try linux, and he got an Ubuntu install (ill check version tomorrow).Anyways, we installed it, but during boot of either it (going though a boot slector menu, hitting F it shows only two lines on the screen (something vaguely similar too):GRUB loading stage1.5GRUB error 21 (or 27 cant quite remeber)
I did, unfortunately, have to step out while it installed leaving him at the helm. now the main problem is this: Ubuntu will not boot, and neither will the previous (contained on a totally different harddrive) Windows XP. A third OS (Vista) still boots, but unfortunately my dad had all his apps on his XP drive. Now, the ubuntu we put on a third Hharddrive (Both Vista and XP boot from two IDE docks in the machine (one Primary master and one secondary master)), but the ubuntu was installed on an enclosed (In the case) SATA drive partition. it seemed to have installed but when selecting to boot form it, or the harddrive with the XP system, i get the above error. however, vista boots completely without problems. Anyone ever seen sometihng like this? the computer responds to no commands beyond ctrl-alt-delete at this lock up, and no dos/command prompt opens up. it just sits there at these two lines until either ctrl=alt=delete or a hard reset are pressed.
View 3 Replies
View Related
Jan 9, 2011
Sometimes when my machine tries to boot ubuntu it works SOMETIMES, but most of the time it hangs on a certain driver/message. I've disabled the silent splash to show you guys where it freezes.
Quote:
Marking TSC unstable due to TSC halts
Switching to clocksource hpet
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [T22] (67C)
[Code]....
And then it stops there. I think ATA_PIIX is some ubuntu ata driver, but I don't know why there since my hard-drive passes all the S.M.A.R.T tests.
Keep in mind it SOMETIMES, but not very often, boots.
Edit: This machine was used with Ubuntu 8.10 before, and possibly 9.04, but that was before they introduced Audio for Intel HDA's Sigmatel. This is also a clean install.
View 2 Replies
View Related
Apr 14, 2010
Basically the situation is that the boot hangs if my USB KVM switch is connected. The keyboard works fine through the KVM switch to access the BIOS menu and in the grub2 menu, but as soon as it starts to boot, I get a black screen with a white cursor on top which never goes anywhere.The weird part is that if I disconnect the KVM and reboot, it gets past this point and I can reconnect the KVM and both the mouse and keyboard work normally.However, even if I plug the keyboard in directly but leave the KVM plugged in, the boot hangs. Something about the fact that the KVM is connected (rather than not detecting keyboard) is causing the boot to stall.
The even weirder part is that this worked fine on my previous build, which was 8.04 upgraded sequentially to 9.10. But my system drive died so I rebuilt directly from 9.10 ISO and now this does work. I have tried downgraded to grub .97, I have tried switching between server and generic kernels.This seems to be the same issue reported in[URL]
View 4 Replies
View Related
Apr 30, 2010
I just installed 10.04 i386 Server(release version)last night on an older IBM workstation (sorry, for the life of me can't remember model and I'm at work now); P4 2.4, 512Mb RAM, generic Intel graphics. This was a base install (aside from OpenSSH) with no window mgr. The HDD was wiped during the install and GRUB2 wrote to the MBR.
The install went smoothly, and on the soft reboot after the install I got a shell and was able to login, etc. and even SSH in.I unplugged the machine, moved it, booted, and got a cursor in the upper-left of the screen for about 3 seconds, and then the monitor would enter power save mode. (I tried 2 different models of monitor). While the cursor was on the screen the HDD access LED was blinking with activity, but that would stop right before the screen would enter standby. Tried a few reboots with the same result.
I'm thinking this is not a video driver issue (as similar threads have suggested),because the splash screen for the install disc renders properly and on the first successful boot the shell rendered appropriately at a high resolution.I can hold down shift to enter the GRUB2 menu, which also renders at a higher-than-text resolution and is defaulted / displays the correct options.
Most other threads with a similar yet non-video issue centered around GRUB2 issues with a dual-boot machine, which mine is not.I did go in via rescue mode (off the install CD -- the rescue option of the GRUB menu has the same result as a standard boot), and checked that my grub.cfg was correct, and I ran grub-install to no avail, and also ran grub-mkconfig on a subsequent boot to no avail, yet the grub.cfg generated appeared identical to the original generated during install.
The partition/file system is default layout.
20 Gb IDE (/dev/sda)
/dev/sda1 /boot ext2
/dev/sda2 Ext
[code]....
I'd be happy to give more info if someone has a troubleshooting direction in which to go.
View 1 Replies
View Related
May 2, 2010
I installed lucid the other day on my laptop, the first time it booted after installing it gave two error messages (unfortunately I can't remember what they said). The errors stopped appearing after that but once I select Ubuntu from the boot menu, it just hangs on a black screen for a good 15 seconds at the least before it runs the plymouth screen for like 2 seconds (the progress bar is already full) and then goes into the login screen. Here is my boot chart:
http://akgenome.com/files/bootchart.png
I was wondering if anyone can tell from that what is causing the issue and perhaps how to fix it? The boot log is like 3 lines long and is completely normal.
View 1 Replies
View Related
May 17, 2010
I have an Acer Aspire One D250 with Ubuntu 10.04 Netbook Edition installed. The system hangs the majority of boots at the exact same place. Here is what I see when system hangs:
Code:
udev: starting version 151
usb 1-2: configuration #1 chosen from 1 choice
[code]....
View 9 Replies
View Related
May 21, 2010
I recently installed ubuntu 10.04 lts. Whenever i boot ,it hangs the moment i log in. I had the same problem with 9.10 as well.
View 1 Replies
View Related
Jun 13, 2010
My computer is hanging on boot if I do not have the USB drive attached. The USB is in /etc/fstab as: UUID=023d6f83-04f5-4248-82d6-c2dbd1a77e18 /mnt/usbdrive ext4 defaults 0 0
This is all I can see on the monitor once it hangs (Ubuntu1004 is the label on my root filesystem): fsck from util-linux-ng 2.17.2 Ubuntu1004: clean, 56288/1921360 files, 425861/7681078 blocks
If I plug in the USB drive while it is at this point, it is happy and continues booting...
Here is some output from /var/log/messages if it helps at all (I'm assuming the 6.977 and 120.245 are times, meaning I plugged in the USB drive at 120 seconds, so you can see that it was hung up during that time):
Jun 13 11:35:30 BSERVER kernel: [ 6.791619] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Jun 13 11:35:30 BSERVER kernel: [ 6.832413] Console: switching to colour frame buffer device 80x30
[Code]....
View 9 Replies
View Related
Jul 19, 2010
So I turned off my computer the other day (I leave my laptop on, pretty much 24/7 I only turn it off if I have to, or I forget to plug it in I turned it off this time just because it was feeling warm)...
And when I went to turn it back on, the splash screen was big and ugly looking, then the orange ("loading") dots loaded to the end... but then it just stopped.
My computer wouldn't boot up... so then I used one of the older versions (you know grub lets you select versions before upgrades or whatever)... and the boot splash was the nice small version... and it loaded just fine, but then after the splash screen went away... the monitor just stayed black... same thing with the version before that.
So then I tried recovery mode on the first one (the latest), and when I clicked "boot normally" it took me to shell. However, everything was working fine, I could load up my non-x dependent programs like IRSSI just fine.
I think it has something to do with me installing the ATI proprietary driver (which was stupid of me, Ubuntu was handling my graphics card perfectly without it... and I hate using closed sourced software).
View 3 Replies
View Related
Jul 27, 2010
I'm trying to track down a problem with my server. Basically, I can get it to boot with a LiveCD and do rescue stuff with it - I just can no longer get it to boot. I've been slowly working my way through all of the error messages that come up during the boot process, and knocking them off one by one. Right now, they're fairly minor.
I'm trying to find out what the big issue is by looking at the logs. The last thing that it does is bring up apache2, says [OK] and then hangs. I've tried to do ls -lustR on /var/log to see what's the last log touched, and that's syslog or boot.log, but the last entry says something along the lines of Apache2 is up and running.
Where else should I look?
View 5 Replies
View Related
Aug 12, 2010
I was running Ubuntu 9.10 on my Toshiba A40 Laptop and decided to take the plunge and upgrade to 10.04. Everything seemed to go well until the Restart. Now it only gets to the Splash Screen (Purple Screen with "Ubuntu" and dots under it) and then there is a flash and the text becomes blocks briefly before going to a blank screen! It seems like it might be a video problem but...
View 1 Replies
View Related
Sep 10, 2010
I did a fresh install of Ubuntu 10.04 on a desktop. I then did the system updates and on the reboot the system now hangs at the splash screen before the login screen. I only get a blinking cursor on the text-based terminals. I don't see the grub menu, I assume because Ubuntu is the only OS on this machine. So I can't boot to single user or text-only mode.
View 3 Replies
View Related
