Ubuntu :: 10.10 Live CD Boot Hangs?
Oct 14, 2010
With Mythbuntu 10.10, the Live CD hands before it can fully boot the OS to a GUI. I'm running an IBM ThinkCentre (P4 2.6Ghz, 512mb RAM) with an NVidia 6200, and I'm using an HD LCD TV for the display.
I've tried to use nomodeset but that hasn't helped it boot. I've tried disabling dmraid also but I end up getting this error: 'General Failure Mounting File Systems'. I've had no such problems with the previous 3 versions of Mythbuntu. Although I didn't have this TV when I installed those ones... could that be the issue perhaps?
View 1 Replies
ADVERTISEMENT
Aug 2, 2011
[code]...
I can't boot 11.04 live CD anymore: when it starts booting the kernel it hangs with a blinking. I can reproduce it all the time now. The interesting thing is that I installed the system using the very same live CD that I can no longer boot. If I unplug the HDD, I can boot the live CD. I can boot 10.10 no problem, however (as well as a bunch of different distros). After booting it, if I choose restart from the menu, I can boot from my HDD no problem, but only once.
[code]...
View 2 Replies
View Related
May 28, 2010
I currently dual-boot Windows Vista and Suse 11.2 on my Gateway desktop machine. I'd like to try out Fedora in a triple-boot situation.
My trouble is that the F13 Live CD hangs during boot. I've checked the hashes of the downloaded ISO files, and done burns on multiple media. During booting with the Live CD, my box hangs and I have to use the physical power button to turn off the box.
I've tried the 64-bit KDE spin (my preferred choice), the 64-bit GNOME version, and also the 32-bit KDE spin, and all of them hang at the same point. Removing the "quiet" boot option shows that it hangs after setting up my built-in card reader. When I installed Suse 10.3 on this same machine, I had to use the flags "acpi=off" and "brokenmodules=pata_it821x". Would the syntax be the same if I wanted to try with those boot options with the F13 Live CD?
Using the ISO files in VirtualBox inside my working Suse install works just fine.
View 12 Replies
View Related
Jan 1, 2010
I was using Ubuntu 9.10, until I got a new graphics card (Nvidia GeForce 9800 GT). After I got that upgrade, Ubuntu no longer supported that card for some reason, so I decided to try Linux Mint since it was a close relative to Ubuntu. Still no support for the video card.
I've always wanted to try Fedora so I decided to grab the x86_64 live cd and burn it. I stick it into my disk drive and it boots where it shows me the options to "Boot" "Verify and Boot" "Boot from Hard Disk" and one other option.
I tried the Boot option, and after selecting that, everything stalls, and my display turns off (not the entire monitor, just the display). I tried Verify and Boot, and still no luck.
I have also tried the i686 live cd and the same issue. It can not be the way I am burning it, cause I've gotten other live cd's to work with the same method of burning. Is it that Fedora does not support the card?
I am trying to get the GNOME version up and running.
View 2 Replies
View Related
Oct 12, 2010
My live cd worked flawlessly.
After I installed it, is another story I chose to include the suggested .mp3 codec, and to install updates at the same time.
Cmos and hardware all inits fine, then I get several seconds of a cursor, followed by the nice "ubuntu" title with little orange squares under it.
Interestingly, the squares do not cycle until I hold down the power button.
Searching for "10.10 boot" somehow returned zero results. ??
View 4 Replies
View Related
Mar 25, 2011
I try to boot the live CD and try xubuntu without installing, and my computer just hangs at a black screen, cuts off, then goes black and repeats. I also tried just installing with nomodeset enabled and it seemed to install fine, but it did the same thing as it does with the live cd, GRUB wouldn't even load... the computers specs [URL]
View 3 Replies
View Related
Dec 21, 2010
I have the same problem with an Ubuntu 10.04 live CD. Whenever I attempt to boot (Lu|U)buntu from a live CD/USB, on most computers. it works just fine. However, on two computers, the live media starts off just fine with the main menu (Try Ubuntu without installing, etc.), then, when I select any option except 'Boot from First Hard Disk', after a few seconds, the CD stops spinning or the USB loses power. I'm convinced it's not a problem from the media, since it works perfectly fine on some computers.
Sysinfo:
Code:
Host Name: OWNER-PC
OS Name: Microsoftr Windows VistaT Home Premium
OS Version: 6.0.6001 Service Pack 1 Build 6001
OS Manufacturer: Microsoft Corporation
[code]...
View 1 Replies
View Related
Oct 20, 2010
I had to reinstall Windows 7 on my machine (go figure) and I am trying to restore GRUB so I can use Ubuntu again, but I can't seem to do it with my 10.04 Lucid Live CD...which I can actually get to work with "nomodeset" on my Nvidia card (GeForce 6150 LE). However, I try to use my 10.10 Live CD, and even with "nomodeset" I get nowhere. If I hit the ESC key, I can read "stdin error 0" or something along those lines, then it shows many repeating messages with "logical blocks"...
View 1 Replies
View Related
Apr 28, 2011
Ubuntu-live-usb hangs And the only thing I see are Ubuntu and dots changing colours from orange to with. How may I see boot post and see where the problem are? I have check the disks by hold down -shift.
View 2 Replies
View Related
Oct 31, 2010
Using a multitude of different programs, including the one the official site recommended, it always hangs at this screen with a blinking cursor:
Code:
SYSLINUX 4.02 2010-07-21 EDD Copyright (C) 1994-2010 H. Peter Anvin et al
how do I get past this? What's going wrong here? I checked the md5sum of the iso and it matches up with the official one.
Edit: I know the flash drive isn't at fault, because I've used it as a live USB for 10.04 and several other distros.
View 3 Replies
View Related
Apr 25, 2011
i am having old hardware..here the specs..AMD Athlon XP 2200+1.80 Ghz,736 MB of ram,10 GB hard disk and
Nvidia GeForce2 Integrated GPU i tried to use live cd it hangs after loading bar or at some times before itselfi even tried to use fedora 11 kde live but it hangs after booting up
View 9 Replies
View Related
Apr 25, 2011
here are my specs...AMD Athlon xp 2200+,1.80 Ghz,736 mb of ram,10 gb hard disk&Nvidia GeForce2 Integrated GPU...actually it hangs up after loading that bar or sometimes before loading itselfshould i opt for older fedora if so which version i even tried fedora 11 kde but it hangs after booting up
View 1 Replies
View Related
Feb 11, 2010
I've created a live and persistent USB boot of OpenSUSE 11.2 KDE according to the howto. It boots and works fine for about 5 minutes and then hangs. Only the mouse will move but I can't click on anything and it never comes back.
View 3 Replies
View Related
Jul 16, 2010
Can't boot 11.3 gnome live cd on my x86_64 system with Radeon hd 4650 agp. Boots into a black screen and hangs (two tries). Boots fine on another pc with on-board radeon pci-x.It also doesn't work in latest Virtualbox. Need I remind you: very, very bad impression for non-linux afficianados...I'm a happy user of 11.1 and 11.2 on same physical pc.
View 2 Replies
View Related
May 19, 2009
For the first time, I booted up a Kubuntu live CD on a laptop (850 MHz, 40 GB HD, 256 MB RAM). Earlier releases (< 9.04) boot up fine but it does not. It hangs up right on the splash screen and I can view nothing but a blinking cursor on the console screen. The screen hangs when the loader reaches about 10% in the blue bar. No further information can be provided when there is just a blinking cursor at the console. The CPU shows no activity. The CD boots up fine on other computer. How do I go on installing Kubuntu? Is it a good option to use the Ubuntu Server CD and install all the Kubuntu desktop software on it once it is installed (Server edition is not live disk, and I do not have an alternate install CD)?
View 1 Replies
View Related
Jul 23, 2010
I get the newest fedora 13 dvd install & the live cd. Put on the disk and try to install. But the installer hangs on random times, so i cant install the system. Sometimes hangs on the anaconda start, others in the partition tables, others in the language section.
i try to run the live cd and install from there. Ok the first time the cd boot very nice . But when i try to install , the pc hangs again. Other times the boot from live even finish, when the last percents r coming, hangs again.
I all hangs, the dvd drive stop's and never return. So the Fan of cpu start to run very quickly and stay there forever until my patience permits.
So i use the ubuntu installer ( almost 4 years with u fedora, and need ubuntu installer!?shame on u) and search some information about the case. Yes, the last ubuntu boot,install, and run out of the box very quickly!
I see others with Dell & others brands still have problems with hangs and freezing , in boot and installs, so the first thing i search was the kernel parameters and try to use some flags.
I think the source of this kind of problem is the acpi . When i check the flag pci=noacpi or acpi=off , i have see that on the pre-anaconda start, when u choose the english language in text mode, clicking next the installer cant anymore find the media DVD, and the hard disk with the partition table. Sometimes the installer brings me the option to search in the ubuntu partitions, sometimes no.
How to debug and search the source of the problem? Any way? code...
View 2 Replies
View Related
Aug 2, 2015
I am trying to make a live usb drive with persistents and so far I have used win32DiskImager to write the debian-live-8.1.0-i386-gnome-desktop image to a usb drive. (im using a windows machine to get this set up) and it all went fine. The problem shows itself when i boot from the drive however. it boots fine and i select the live option when prompted. then i get the debian loading screen and once it finishes loading both my screens turn to garbled static and it just hangs there.
View 2 Replies
View Related
Jul 11, 2009
Im trying to install fedora 11 from the live CD and when i get into the CD meny where it says "boot" and "press tab for boot options" i press enter. then a bunch lines flash across the screen with a lot of error messages. then the fedora loading bar at the bottom loads. hangs for about 1 minute at the very end. then the GMD screen appears. But the GMD screen is all out of place and its patchy as if my graphics card was causing some kind of error
View 1 Replies
View Related
May 25, 2010
I'm running Ubuntu 10.04 and a small Windows 7 partition (cuz I can't get Ubuntu to run my MSI TV@nywhere plus card but that's another issue).I can log into Windows fine. If I choose Ubuntu, however, the boot process will go thru a few screen flickers. Then one of two things happens:1) I get a scrambled up pixelated image (not sure what it is) for about 3 second, then it goes into the login screen and I can log in normally.2) I get the scrambled up pixelated image and it hangs. This happens about 4 times out of 5 when rebooting.
I do have an nVidia card and a beta driver (they published it the 21st, I believe, of this month) but this happened long before that. It's happened ever since I installed any of the drivers (I've tried a couple different versions, hoping to fix this) for my card.
My system is a frankenputer:
Phenom II quad core 3.0 cpu
nVidia GeForce BFG 6600
4G DDR3
500G drive
Note: I do have 3D rendering when I finally get into the desktop. Everything works great, except that when I'm playing my mmorpg, Regnum Online, it freezes the entire computer and I have to reboot (not sure if that has anything to do with it or not).In case it's needed, this is my grub:(Second note: I'm sorry for the length of the post but I don't know how to upload documents/files to show)
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
[code]...
View 1 Replies
View Related
Aug 28, 2010
When I boot up my laptop whith memorycards in the slots the boot hangs at "Wating for /dev to be fully populated", "Activating swap" or somewhere in between.If I take out the memorycards so the slots are empty, the laptop boots just fine...Its a CFCard and a SDcard in a PCIMAslot.Does anyone have a clue?Its not a big problem just very annoing to have to take out the memcards all the the time.
View 4 Replies
View Related
Apr 20, 2010
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
View 9 Replies
View Related
Nov 9, 2010
My laptop can't boot from cdrom becouse it is broken and it can't boot from USB becouse it has never been able. Ubuntu 8.10 now run in my laptop withgrub 1.I've just try the following trick.1) I put grub4dos in /boot2) I put iso image in /boot3) I add the follwing entrt in source.list
Code:
# =========== GRUB4GOS ===================================
title == Use grub4dos for the following entries: ==
[code]....
View 3 Replies
View Related
Dec 30, 2010
i do software (learn keyboard) for blind people. I selected ubuntu and festival and TTS. Please i NEED (mandatory for disabled people) live cd what can be inserted into cdrom and everything is done - automatic boot, settings done, software is on start-up... created own distribution, programed software, done settings, but what kills me is : How i can run AUTOMATIC (without asking, no enter) boot from CD-ROOM. Now CD asking :
- 1) What language want you (here is only czech) - need ENTER (killer for disabled people)
- 2) Boot from CD or hdd - need ENTER (killer no. 2 for disabeld people)
- after 2) I m ok, i can handle it myself, works.
I edited file in isolinux menu.lst etc - I can edit text but i do not know how run defalut choice automaticly. timout 0 does not work I spent a lot of hours reading tutorials grub/isolinux and have nothing ...
View 3 Replies
View Related
Oct 9, 2010
I was trying to do a fresh install of Fedora 13 using a live CD on my 7-year old laptop. However, the installation failed during creation of home folder, citing some disk issue.Now, when I try to reboot my comp with the live CD, the boot screen hangs at the "f" graphic. What could be wrong? Is there anything I can do to reboot with the live CD and also install Fedora 13?Also, is there a way to fix corrupt disk sectors or skip them during installation?
View 2 Replies
View Related
Dec 2, 2010
I downloaded the .ISO for Fedora Core 14 Live, with the intention of installing it to my HDD.
I burn the .ISO with no reported problems.
I boot to the installation CD and can get to the point where it asks me to Login (a timer is also going down for Automated Login).
Once I click "Login", nothing else ever happens.
I can hear the disc spinning in the drive and it's trying to load something, but it never does.
I thought that maybe my older (2003) laptop might just be slow, so I allowed it to do whatever it seemed to be doing overnight while I slept.
Well, I woke up this morning and it was still doing the same exact thing with no results.
---------- Post added at 05:54 PM ---------- Previous post was at 05:51 PM ----------
Oh, and I intend to dual-boot. I have already made a partition using Norton Partition Magic. It's NTFS filesystem for now, but I figured the Fedora Installation would give me an option to use that partition anyway - NTFS or not (meaning, it would wipe the NTFS file system and use whatever it is that Fedora Core uses). Am I mistaken in assuming this?
View 4 Replies
View Related
Aug 26, 2010
I upgraded from 8.04 to 10.04 LTS. Now when booting it hangs and drops me to a initramfs shell. This is a scsi machine with 3 drives. The error I get before dropping to the shell is that the drive with the uuid in menu.lst does not exist.If I type "exit" at initramfs, it finishes booting in a couple of seconds. The uuid is correct and maybe this is a timeout error of some kind. This is a machine that I would want to reboot without having to walk over and type "exit" at the initramfs prompt.
View 3 Replies
View Related
Oct 11, 2010
I installed Maverick Meerkat today, and it was working great on the first boot (which is when I updated the system...). However, since then, it won't boot up. When I looked at the output during boot, I noticed that it hangs when it gets to:
Code:
floppy0: no floppy controllers found
After that, the hard drive access light on my laptop turns off and it just sits there.
View 9 Replies
View Related
Mar 6, 2011
I've just had the power cut out while downloading a bunch of updates for Ubuntu 10.4
I haven't updated to the latest release because I'm lazy and have slow internet.
Anyway, once power had been restored, I turned my desktop on to find that my install will not actually load. It boots up and goes to the purple 'Ubuntu' screen with the orange dots, and just sits there (for about 15 minutes so far) without any activity on-screen.
I'm running Ubuntu 10.4 as I said above, and I'd really like to get a solution that does not include 'start from a fresh installation', since I've had to really wrestle with this install to get my wireless adaptor (USB) and wacom tablet working properly.
View 1 Replies
View Related
Jan 5, 2010
Ubuntu server hangs when I boot with a wired Ethernet connection. The last thing I see in the console is code...
I have no problem when I boot to a Wifi connection even when Samba and openssh-server are installed. I see the same sequence of lines in the console as I reported initially (including Reloading, Restarting), but then the output continues with
* Starting the Winbind daemon winbind
Both the wired and wireless connections use dhcp. Obviously, I installed the OS using a wired connection, so it worked reliably once. I'm stuck.
P.S. I tried dhclient -r before rebooting. The machine did not shut down correctly and when I forced a reboot it appeared to hang at the usual place. However, after a long delay it proceeded to boot. Perhaps I am observing a delay due to a very long timeout. I will try another reboot now and check again in the morning.
View 2 Replies
View Related
Jun 17, 2010
I am looking to speed up my boot time; it is currently around the 2-2.5 minute mark from Grub to desktop (including about 15 seconds at the login screen while I type my password).
I have forced ureadahead to reprofile, and have rebooted a few times until the boot time is fairly stable/consistent.
No xorg errors and only one warning ((WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.)
However, dmesg reports the following:
Code:
...
[ 1.121369] Freeing unused kernel memory: 656k freed
[ 1.121926] Write protecting the kernel text: 4676k
[ 1.121977] Write protecting the kernel read-only data: 1840k
[ 1.146159] udev: starting version 151
[Code].....
View 9 Replies
View Related
