When I boot up my laptop whith memorycards in the slots the boot hangs at "Wating for /dev to be fully populated", "Activating swap" or somewhere in between.If I take out the memorycards so the slots are empty, the laptop boots just fine...Its a CFCard and a SDcard in a PCIMAslot.Does anyone have a clue?Its not a big problem just very annoing to have to take out the memcards all the the time.
View 4 RepliesAfter my most recent update, the boot sequence hangs at:"a start job is running for Create Volatile files and directories" with a timer and no limit .. I let it go for 12 minutes, but nothing.It seems as long as this sequence remains, the boot process does not finish and just hangs here.I haven't been able to find anything specific to this. I currently cannot boot into this machine, though do have access to files via dual boot.
View 8 Replies View RelatedI'm running Debian Squeeze on a Dell Studio Laptop, and this morning my computer woke up and gnome was randomly frozen. I dismissed this as a random error and proceeded to hard-reboot the computer. It now will not boot at all. After multiple attempts, every time the boot process hangs on "Starting GNOME display manager gdm3." I even left it there for 2 hours while I was gone to see if it would get past the hang. It did not, and was still stopped at that same line when I got back. get my system back. I have a live CD available to perform maintenance if anyone has an idea of what's wrong.
View 7 Replies View RelatedI've got the last Debian stable release, the amd64-DVD-1 file , and copy it to my USB stick, using win32diskimager, as recommended in the installation guide.
It seems to go all fine, but when I rebooted, after entering the passphase it started a fsck "from util-linux 2.25.2", then it says:
"/dev/mapper/Debian-root: clean" and stuck there. i gave it quite a bit of time, tried to reinstall it and also got into the rescue mode of the installer,
I installed Debain Lenny as a dual boot with ubuntu 10.10. Chose not to install Grub legacy in the mbr or in any partition because I thought grub2 could handle it. All went well, updated grub2 in ubuntu and it found Debian, but when I try to boot into Debain it hangs at - waiting for root filesystem. I've searched, but can't fathom why this is happening, much less how to fix it without just reinstalling it.
View 9 Replies View RelatedI had Debian 7.9 up and running like a charm until yesterday. Today I did the upgrade to 8.2, now boot hangs. I see 3 boot entries for the new kernel now -
Debian GNU/Linux, with Linux 3.16.0-4-amd64
Debian GNU/Linux, with Linux 3.16.0-4-amd64 (sysvinit)
Debian GNU/Linux, with Linux 3.16.0-4-amd64 (recovery mode)
The latter 2 entries have no problem booting up. So do the previous kernel(3.2.0.4) entries. Only the first one hangs, for which I see these 6 lines on the console:
[ 0.214704] pnp 00:04: can't evaluate _CRS: 12298
Loading, please wait...
fsck from util-linux 2.25.2
/dev/mapper/myhost-root: clean, 198627/61000000 files, 2160052/24412 blocks
[ 0.047141] kvm: disabled by bios
[ 0.000985] kvm: disabled by bios
How can I make it boot up like others?
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.
This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).
My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.
Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.
I use a static compiled kernel and a fully encrypted disk apart from a boot partition. I have recompiled and installed kernels many times. When I tried with the latest kernel from Testing, 4.2.6, the system will not boot. Not only that but the previous kernel now does not boot. However, a stock modular kernel does boot. The static kernel hangs at:
Code: Select allVolume group "dk" not found
Cannot process volume group dk
/run/lvm/lvmetad.socket: connect failed: No such file or directory
WARNING: Failed to connect to lvmetad. Falling back to internal scanning.
Reading all physical volumes. This may take a while...
/run/lvm/lvmetad.socket: connect failed: No such file or directory
[Code] ....
And after giving the password the boot continues successfully. How to diagnose it further?
I'm running an LMDE install, but with the Sid repositories.Everything has been fine until yesterday's updates, after which I can't boot normally. The boot hangs at the login screen, and nothing works - not the mouse, the keyboard, the touchpad, nothing, and it requires holding the power switch to get out. I can boot to a root recovery console, but networking doesn't work at all there. I can run startx there and get an X desktop as root, and networking still doesn't work. No wireless, no ethernet, no nothing. From the recovery console I can run shutdown, and when prompted for a password, can enter Ctrl-D, which immediately drops me back to X, to the normal login screen, which now works normally, and I get a normal X session in which everything works. This is the same for all installed kernels, including 3 versions of the Liquorix kernel and the standard Squeeze kernel. It would appear to be something in my settings in /home, but I can't find anything that looks suspicious. I ran smxi again after booting through the root console, without any improvement.
View 6 Replies View RelatedA USB hard drive is used as backup drive.
When it is not plugged in, the system boots without any issues.
When it is plugged in, this hangs to the point I have to unplug the CPU.
I'm running Ubuntu 10.04 and a small Windows 7 partition (cuz I can't get Ubuntu to run my MSI TV@nywhere plus card but that's another issue).I can log into Windows fine. If I choose Ubuntu, however, the boot process will go thru a few screen flickers. Then one of two things happens:1) I get a scrambled up pixelated image (not sure what it is) for about 3 second, then it goes into the login screen and I can log in normally.2) I get the scrambled up pixelated image and it hangs. This happens about 4 times out of 5 when rebooting.
I do have an nVidia card and a beta driver (they published it the 21st, I believe, of this month) but this happened long before that. It's happened ever since I installed any of the drivers (I've tried a couple different versions, hoping to fix this) for my card.
My system is a frankenputer:
Phenom II quad core 3.0 cpu
nVidia GeForce BFG 6600
4G DDR3
500G drive
Note: I do have 3D rendering when I finally get into the desktop. Everything works great, except that when I'm playing my mmorpg, Regnum Online, it freezes the entire computer and I have to reboot (not sure if that has anything to do with it or not).In case it's needed, this is my grub:(Second note: I'm sorry for the length of the post but I don't know how to upload documents/files to show)
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
[code]...
As above, my wheezy 32bit hangs at boot. the last few lines displayed are
Code: Select allMounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files...
Setting kernel variables ...done.
Setting up resolvconf...done.
Configuring network interfaces...
[Code] ....
I removed the files from /etc/network/interfaces.d/ just in case. i still can't boot up.
Resolved (I think) as on this post: [URL] ....
I have been using F10 since its release and have not had any trouble until now. During my last session, I ran an update. Today when I boot my desktop (single boot btw), it hangs just after the boot loader. The only sort of warning is:
eth0: link up, 100Mbps, full-duplex, 1pa 0x45E1
I have browsed the forums to no avail. Other have the same issue, but with no posted solution. I have tried disabling NetworkManager, but I think it may be the service that runs after NetworkManager.
i've installed nvidia driver by
Code:
yum install akmod-nvidia
every thing went ok , but after reboot the system hangs right after
[code]...
Boot-up hangs at black screen with blinking cursor in upper left corner for over 2 minutes before continuing. I select F 14 with grub hit the enter key and go straight to a black screen with blinking cursor. Hitting the esc key does nothing until boot-up actually starts. Afterwards, boot-up is perfect. I had this problem a few upgrades ago and the fix was simple but I can't remember what I did. I've searched every phrase I can think of and can't find a thread that addresses my problem.
I have a F 13 kernel on my machine and have no problem booting it.
Dual-boot, F 14 and windows 7, 64 bit.
I installed OpenSUSE 11.2 and manipultes Window Behavior from Personal Settings so I can't access to my account while login. I use kde. Now I can access the system from the root login. How can I restablish the kde default settings on my account from the root account?
View 6 Replies View RelatedI upgraded from 8.04 to 10.04 LTS. Now when booting it hangs and drops me to a initramfs shell. This is a scsi machine with 3 drives. The error I get before dropping to the shell is that the drive with the uuid in menu.lst does not exist.If I type "exit" at initramfs, it finishes booting in a couple of seconds. The uuid is correct and maybe this is a timeout error of some kind. This is a machine that I would want to reboot without having to walk over and type "exit" at the initramfs prompt.
View 3 Replies View RelatedI installed Maverick Meerkat today, and it was working great on the first boot (which is when I updated the system...). However, since then, it won't boot up. When I looked at the output during boot, I noticed that it hangs when it gets to:
Code:
floppy0: no floppy controllers found
After that, the hard drive access light on my laptop turns off and it just sits there.
I've just had the power cut out while downloading a bunch of updates for Ubuntu 10.4
I haven't updated to the latest release because I'm lazy and have slow internet.
Anyway, once power had been restored, I turned my desktop on to find that my install will not actually load. It boots up and goes to the purple 'Ubuntu' screen with the orange dots, and just sits there (for about 15 minutes so far) without any activity on-screen.
I'm running Ubuntu 10.4 as I said above, and I'd really like to get a solution that does not include 'start from a fresh installation', since I've had to really wrestle with this install to get my wireless adaptor (USB) and wacom tablet working properly.
After doing a reinstall, and then upgrading, I have a problem: as the boot script comes to ATD, it hangs. Someone suggested doing an interactive start ---- and it worked! Just say no to ATD, and boot goes well. Of course, I don't really want to do that each time. How do I remove it? That is, get it out of the init.d or rc.d boot procedure
View 4 Replies View RelatedWhenever I boot fedora core 13 it starts Plymouth and a txt progress bar starts at the bottom. Whenever it gets to 100% it flickers a little bit then does nothing. The system doesn't hang I can still crrl-alt-delete and it shows the processes stopping. When it displays the programs starting it gets to jexec and nothing happens.
View 1 Replies View RelatedI've looked around the threads and can't find this exact problem. I'm on a Compaq Presario F700 running openSUSE 11.3. During boot it hangs in three different places, all of which I can clear up by clicking the mouse buttons or moving my finger on the pad.
The first place it hangs is after: doing fast boot ^[^[^[creating device nodes with udev
The second place is INIT version 2.88 booting
The third place is copying static /dev content.
Like I said, I can get through all three and everything else works great, I just hate having to watch my machine boot to catch these.
Ubuntu server hangs when I boot with a wired Ethernet connection. The last thing I see in the console is code...
I have no problem when I boot to a Wifi connection even when Samba and openssh-server are installed. I see the same sequence of lines in the console as I reported initially (including Reloading, Restarting), but then the output continues with
* Starting the Winbind daemon winbind
Both the wired and wireless connections use dhcp. Obviously, I installed the OS using a wired connection, so it worked reliably once. I'm stuck.
P.S. I tried dhclient -r before rebooting. The machine did not shut down correctly and when I forced a reboot it appeared to hang at the usual place. However, after a long delay it proceeded to boot. Perhaps I am observing a delay due to a very long timeout. I will try another reboot now and check again in the morning.
I am looking to speed up my boot time; it is currently around the 2-2.5 minute mark from Grub to desktop (including about 15 seconds at the login screen while I type my password).
I have forced ureadahead to reprofile, and have rebooted a few times until the boot time is fairly stable/consistent.
No xorg errors and only one warning ((WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.)
However, dmesg reports the following:
Code:
...
[ 1.121369] Freeing unused kernel memory: 656k freed
[ 1.121926] Write protecting the kernel text: 4676k
[ 1.121977] Write protecting the kernel read-only data: 1840k
[ 1.146159] udev: starting version 151
[Code].....
I think I've got a graphics/sound compatibility issue--both are onboard, but have no idea what to do. 10.04 will run in recovery low-graphics mode but won't load otherwise.
I have an old Gateway MX6030 / MA2 from 2005, 1.4Ghz Celeron, 1024 MB RAM. It had 9.04 on it. I got it out, thinking I could use it to store and remotely access research files for Mendeley and backup other data from my primary machines. I was running into wireless connectivity programs, so rather than fix it I figured I'd upgrade to through to 10.04 and plugged it into the router. 9.10 was a little choppy with the sounds when booting up, but worked. 10.04 won't boot properly. It gets to the Ubuntu splash screen with the little dots, which all turn red, then goes straight to a grey screen. The hard disk stops thrashing, and that's it.
If I hit ESC to bring up the grub menu, I can enter recovery mode and use the low-graphics startup to get into 10.04. Sound is still choppy on startup, but wireless, video, etc. all work. I tried to use a USB bootdisks with both 10.04 and Xubuntu 10.04 and got the same issue. The Ubuntu live boot can get to the menu but freezes after I make a selection. Xubuntu just brings up a low-res "XUBUNTU" image and freezes right after that. Hard disk stops turning, and the machine stops accessing the USB disk. Nothing happens.
Is there a way I can access 10.04 low graphics as the default boot? Is this a driver issue? This is a beginner question, obviously, and really, my goal here is just to be able to access the machine remotely so I can keep files for Mendeley in a single place rather than across two machines and three OSes. I don't know if I have the time or patience to learn how set up another machine as an FTP server to try and install through that route.
I just recently installed ubuntu 10.04 and it works great! I got it to work with both of my printers, scanner, and zune! The problem is occasionally when I boot up ubuntu it stops and displays "[drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)"
View 2 Replies View RelatedWith Mythbuntu 10.10, the Live CD hands before it can fully boot the OS to a GUI. I'm running an IBM ThinkCentre (P4 2.6Ghz, 512mb RAM) with an NVidia 6200, and I'm using an HD LCD TV for the display.
I've tried to use nomodeset but that hasn't helped it boot. I've tried disabling dmraid also but I end up getting this error: 'General Failure Mounting File Systems'. I've had no such problems with the previous 3 versions of Mythbuntu. Although I didn't have this TV when I installed those ones... could that be the issue perhaps?
I have ubuntu 10.04 installed on my MacBookPro7,1 (dual boot with reffit). Everything works fine. Today I closed my laptop and open it later again and saw a black screen with a blinking cursor. I was not able to send any keys to it. So I powered down (off button) it.
After Booting It I saw some kernel message, no errors, and then it stops and everything is freezed. Again no keystrokes can be send. The last kernel message is something about scsi. I tried to remove the "recordfail" in the grub2 menu but it doesn't help.
I loaded Ubuntu onto my USB using the USB installer, and then attempted to create a persistent drive (>4GB) according to the link :http://www.pendrivelinux.com/create-...per-partition/
But when I boot from the USB it hangs. I am new to Ubuntu, so I cannot give a lot of details.
When booting from the USB, it goes to the setup screen where I select boot from the USB. A list of commands appear on the screen (it's too quick,to read) and then it arrives at the intro screen with the Ubuntu symbol. On this screen it hangs.
Any suggestions on how to fix this.