Ubuntu :: Hangs At Boot If USB Drive Not Attached
Jun 13, 2010
My computer is hanging on boot if I do not have the USB drive attached. The USB is in /etc/fstab as: UUID=023d6f83-04f5-4248-82d6-c2dbd1a77e18 /mnt/usbdrive ext4 defaults 0 0
This is all I can see on the monitor once it hangs (Ubuntu1004 is the label on my root filesystem): fsck from util-linux-ng 2.17.2 Ubuntu1004: clean, 56288/1921360 files, 425861/7681078 blocks
If I plug in the USB drive while it is at this point, it is happy and continues booting...
Here is some output from /var/log/messages if it helps at all (I'm assuming the 6.977 and 120.245 are times, meaning I plugged in the USB drive at 120 seconds, so you can see that it was hung up during that time):
Jun 13 11:35:30 BSERVER kernel: [ 6.791619] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Jun 13 11:35:30 BSERVER kernel: [ 6.832413] Console: switching to colour frame buffer device 80x30
[Code]....
View 9 Replies
ADVERTISEMENT
Jul 23, 2010
A USB hard drive is used as backup drive.
When it is not plugged in, the system boots without any issues.
When it is plugged in, this hangs to the point I have to unplug the CPU.
View 4 Replies
View Related
Jul 13, 2011
I'm using GRUB to dial boot ubuntu 10.04 and windows 7. Usually it works well. But if I attach my 2T hard drive to the my computer, the booting process will froze after choosing the system to boot. There's nothing I can do but cut off the power.
View 1 Replies
View Related
Feb 18, 2011
I've recently tried to do a full install to a USB stick using a 10.04 cd.
2 things happen as I boot:
1. if Hdds are attached, boot hangs on "checking dmi pool data..."
2. if hdds not attached, "hdd error" scrolls across screen
boots normally w/o the usb stick. I've set up my partitions on usb stick as
1: fat32 2gb <<windows/storage
2: fat32 1.5gb << future persistent install
3: ext4 4gb << hoped-for full install
1 is the first partition so windows finds it nicely. Before install, i unplugged my hdds so that grub wouldn't get confused. I told the installer to put the full install on sda3 with no swap space. I checked (advanced button on summary page) that bootloader is being installed to the usb on dev/sda (sda since no other drives attached). This should put it in the MBR (i think?)
Seems like I pressed all the right buttons huh? Is there a way to diagnose grub and see what's wrong? is there a reason grub may not initialize properly from a usb drive?
View 9 Replies
View Related
Mar 28, 2011
I am trying to install Xubuntu from a flash drive on my PC. I used UNetBootin to get it on my flash drive. When it boots up I get to the Pre Splash screen and I choose Install Xubuntu, it goes to the Xubuntu Splash screen and just hangs there and hangs and hangs. Even if I click Try before Install, it just hangs.
I have a Pentium 4
20GB Hard Drive
512MB of Ram...
Is there a Text install? If so if I install that way will it install the desktop to or just command line? I figured maybe something went wrong when I put it on the flash drive so I am trying again.
View 2 Replies
View Related
Sep 24, 2010
I am trying to boot the CentOS live cd off of usb. I used unetbootin to put CentOS on my 8gb usb drive after downloading the DVD iso. During boot it loads the image and continues until it reaches this point.
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
After this it hangs and won't continue. I am using a Compaq evo n800w and the bios is just updated to the latest version.
View 9 Replies
View Related
Feb 14, 2011
I am trying to set a Ubuntu home server to be a Network Attached Drive, a Media server, and Backup server.All of the computers (mostly windows 7 machines) can see and connect with the shared ubuntu folders, and read write and execute files into the folders. The problem is when programs are installed onto the server they operating systems cannot have "Full control", or change the owner of a file.
This is an issue when using the Ubuntu shared folders as remote hard drive locations because when Windows goes to run the files it keeps popping up with the "Open file - Security Warning" preventing files from being natively run.
View 1 Replies
View Related
Jun 17, 2011
I'm trying to attach a file from a remote disk to my email. I already mounted the disk, but every time I need to attach a file from the remote disk I can't find the mounted disk at the side pane.
View 9 Replies
View Related
Dec 28, 2010
I'm trying to figure out how to perform a minimal install to a USB attached hard drive. A full install works just fine, when I start the install from the LiveCD desktop, all the USB drives are visible and can be installed to. In the minimal install, the requisite kernel modules for USB storage don't seem to be loaded, therefore, my USB hard drive is not visible and cannot be mounted, partitioned, or installed to.
The reason behind this is I'm trying to build an XBMC install on a USB hard drive and want only the minimum backend OS that's necessary as some of the Ubuntu desktop software causes issues with some of the XBMC software. I've posted on the XBMC boards about this, but my questions have gone completely unanswered,
View 8 Replies
View Related
Jul 21, 2010
I had installed Ubuntu 10.04 onto an external hard drive connected by USB to my laptop:
sdd partition
Windoze still resides on the box's internal hard drive:
sda2 partition
I also partitioned the internal hard drive so that I have a repository where my documents etc can be accessed by either linux or windoze:
sda3 partition (FAT32) I'm assuming that Grub is on the external drive somewhere - as is probably now the Windoze MBR. I'd like to be able to give my wife the ability to start the box (and boot into Windoze) when the external drive is not attached (so that she doesn't have to take the latter with her when she needs to be mobile with the computer). What do I need to do to move grub and the MBR back onto the laptop's internal drive? Or, I suppose: What do I need to do to obtain the functionality that I'm looking for? I'm getting somewhat more comfortable with the command line but, I still need a bit of hand-holding
View 4 Replies
View Related
Mar 31, 2010
After much struggling with the server (the one referenced in "shifty, shifty drive letters"), I realized that the problem has nothing to do with drive letters at all. The problem is GRUB2, or some way in which it is misconfigured.
To recap:
Ubuntu Server 9.10
/dev/sda solid-state Sandisk (swap)
/dev/sdb1, /dev/sdb2, /dev/sdb3 2 HW RAID0 SCSI (boot, /, tmp)
/dev/sdc - /dev/sdz 24 one-TB SATA drives
I kept getting "device not found" from GRUB2 when trying to boot. The SATA drives are disconnectable from the front of the chassis. So I disconnected each and every one of them and powered the machine up. To my shock, the machine booted into Linux and it was up and running! It seems that when the 24 SATA drives are plugged in, then GRUB2 can NOT see /dev/sdb. Instead, it sees /dev/sda and fifteen of the one-TB drives (and one floppy drive, whatever that is).
I tried deleting /dev/sdc through /dev/sdz from /boot/grub/device.map, but that didn't work. I also tried plugging in only HALF of of the SATA drives. When the system tried to boot in this state, then GRUB2 just hung. I noticed that the blue LEDs on the front of the (plugged-in) SATA drives blinked on and off in sequence, as if GRUB2 was scanning them. I watched this for about 3 minutes before I got impatient.Is there a maximum number of drives in GRUB2? Does GRUB2 hate SCSI if it detects a whiff of SATA? What's going on?
View 1 Replies
View Related
May 25, 2010
I've got a Tape drive attached to my server connected by SAS card, and am trying to copy some data across.but it fails to write, in dmesg i seescsi 1:0:1:0: Attached scsi generic sg1 type 1mptbase: ioc0: LogInfo(0x31120403): Originator={PL}, Code={Abort}, SubCode(0x0403) does this mean faulty hardware/cables?
View 1 Replies
View Related
May 9, 2011
I recently installed openSUSE 11.4 on another hard disk of my 11.3 machine. I have another drive in my computer that is used solely for extra storage. Before installing 11.4 I could boot my computer with or without the drive installed, but now if I try to boot without it I get Error 17 from GRUB. I don't understand this as there is nothing on that drive that should be needed by boot and I can find nothing in the GRUB configuration that references the drive.I am getting ready to clear the whole system for a fresh install anyways, but it would be nice to know for future knowledge what is causing it.
View 9 Replies
View Related
May 1, 2010
I have Kubuntu 10.04 Lucid installed on my new laptop and I'm trying to get my backup script up and running again. I had a script that would connect using smbmount with my normal user account and then mirror my home folder to the external network attached hard drive with rsync. It seems that rsync needs to be run as user account, not root, to work properly.Some of the setup info for getting this running in Kubuntu Karmic was from this article:
However, smbmnt does not exist in *buntu 10.04. Is there any other way to connect NAS drives as non-root user that is relatively secure? I spent all day yesterday struggling with this and still haven't found a solution.
View 2 Replies
View Related
Feb 21, 2010
I have a desktop version of Ubuntu 9.10 installed on a machine that generally I only want to access remotely (using TightVNC). That is because the machine is under my wife's desk and she is getting a little ticked off that there is a screen right by her foot. The problem is that if I remove the screen then the system gives me a startup error and will not boot. I then have to reattach the screen and select normal startup.
View 9 Replies
View Related
Jul 22, 2011
i was fooling around with ATI graphics settings and after i went to reboot my Desktop it kept comming up with odd symbols instead of a log in screen, then i started to try and do things with a LiveCD and screwed things up even more so now any time i attempt to boot, even into recovery, it stops at the line
[2.573600] sd 6:0:0:3: [sde] Attached SCSI removable disk
i have tried to do multiple fixes with no avail and i am not very savvy with linux as i have only been using it under a year, so it would be awesome if anyone could help this is 10.10 Maverick and the 32bit version,
View 2 Replies
View Related
Jun 21, 2010
I have a 9.10 fully updated install on an old P4 HP desktop that otherwise runs flawlessly. We moved it to the bedroom to use as a media center and when I plug in a Thermolake toaster with a Hitachi 750G SATA drive it is recoginized and available no problem. I can read/write no problem. It works via nfs4 no problem. The issue is if I reboot while the drive is attached it the machine refuses to reboot and hangs on the initial hardware screen not even showing a grub screen. This has always been a native ubuntu machine with no dual boot or any weird grub2 issues previously. Interestingly, I am getting the exact same issue with another HP desktop (Celeron machine) with 9.10 Server 32bit that I' using as a home server. This is obviously a bigger problem because if the server updates or requires a reboot for any reason I can't just leave the drive attached. This drive houses our movie and music collection.
View 9 Replies
View Related
Nov 15, 2010
I have a different problem with Firewire drives than I've seen posted here before. All my Firewire drives work just fine - too fine in fact. I can't boot without all of them being attached. Without them attached Suse just boots into a command prompt in maitenance mode. With ALL of them attached Suse boots just fine. I have tried shutting down normally with dirves attached and shutting down normally with drives disconnected (both unmounting before shut down and just discounting when machine powered off). Nothing changes. I need to be able to boot without the drives attached - I am using Suse 11.1 64 bit wiht KDE 3.5 on a 4 core Athlon. All system files are on internal hard drives - external drives just for data storage (no external USB drives).
View 4 Replies
View Related
Mar 14, 2010
I have Ubuntu 9.10 installed on an old Gateway desktop. It is running a system called Jira using a Tomcat web server, so 99% of the time access is thorugh the web browser. For the rest of the time I access it remotely using TightVNC. This works great so far but the system will not boot if I remove the screen (which I need to do since it is in the way). My question is this...
a. If I uninstall and reinstall using Ubuntu Server edition (32-bit) will the system boot without the screen?
b. Assuming the above will work - can I still access the machine directly using TightVNC (I presume not since that needs the graphics setup). If not, how do I connect to the machine remotely?
View 6 Replies
View Related
Jul 10, 2011
since upgrading the squeeze kernel from 2.6.26-2-686 to 2.6.32-5-686 I´ve been unable to boot my HP D510S/845G without attached monitor. As this computer serves as router and print/faxserver, there is/was neither a monitor nor a keyboard/mouse attached. With monitor everything works fine, without monitor the computer hangs somewhere. Unfortunately it hangs without logging anything in /var/log.
Reinstalling xorg and xserver-xorg didn´t change anything, neither was the new xorg.conf from dpkg-reconfigure -phigh xserver-xorg of any use. (After booting with attached monitor I disconnected the monitor and ran dpkg-reconfigure) Maybe disabling Xorg would solve the problem, but I want to be able to log in via vnc and use a GUI - for example to configure mythtv. Up to the kernel-update everything was working fine, so I think some changes to the new kernel are responsible. how to fix it or how to start logging earlier in the boot process?
View 7 Replies
View Related
Jun 2, 2010
I've put a fresh install of Fedora 13 x86_64 on my new server and I have it automatically log in to the gnome desktop so I can control it via VNC. However this only happens when there is a monitor physically connected when the computer boots. If there is no monitor present at boot time, there is no graphical session started, however I want it to start whether or not a monitor is present.
My hardware is a Zotac IONITX-G-E board (which has an Atom N330 and a NVidia ion chipset of some description). I'm using the Fedora default graphics driver (nouveau). Why doesn't it start a graphical session with no monitor, and is there any way to get Fedora to start one whether or not there is a monitor connected?
View 5 Replies
View Related
Aug 31, 2010
One question: should F13 mount all attached USB devices after boot automatically? I guess it should. However, what I've experienced is that after boot and login, my USB modem + flash memory is not mounted. I need to manually unplug it and plug it again, and then it's mounted
View 1 Replies
View Related
May 14, 2010
I can''t make the machine booth when a monitor is NOT attached to the machine. The PC seems to get past the P.O.S.T with minimal HDD activity, and then it simply hangs there, doing nothing. I know Linux is not booted because the HDD flashes briefly only 3-4 times and then absolutely nothing. When a monitor is attached, everything works perfectly.
I read somewhere that this happend when GRUB tries to display graphics, so I edited the menu.lst and removed the graphics line within it, which causes GRUB to display a B/W clear-text boot-menu (when a monitor is attached), but the machine still won't boot with no monitor. I also edited inittab to boot to level 3, same outcome.
More Info:
HW. FIC ION A603
~Welcome to First International Computer, Inc.~
OpenSuse 11.2 - Almost default install
Added SW: VNC and Squid (both active on Init 3 and 5
Boot Loader: GRUB
View 6 Replies
View Related
Jul 8, 2011
I'm attempting to install debian on my old ibook g3. Upon normal boot I get a black screen with a bar (attached image) I boot the kernel with init 1 and I see that I have no xorg.conf, so naturally I input xorg -configure. Attached is the log, as I am under Windows and read it. Let me know what you think and let me know if you need any output from me[URL].. p.s As I'm a new member I can't attach anything yet so I uploaded it to media fire. ibook.zip (includes xorg.log & IMG_20110707_203900.jpg /984.41 KB)
View 14 Replies
View Related
Aug 23, 2010
1. When booting standalone (no extra display) everything works just fine
2. After plugging in an external display on VGA slot, the boot process hangs during xdm start
Config:
OpenSuse 11.3
KDE environment
DELL Latitude e6510 with 8G of RAM
Graphic card is DDR3 NVIDIA� NVS 3100M 512 Mo
View 9 Replies
View Related
May 25, 2010
I'm running Ubuntu 10.04 and a small Windows 7 partition (cuz I can't get Ubuntu to run my MSI TV@nywhere plus card but that's another issue).I can log into Windows fine. If I choose Ubuntu, however, the boot process will go thru a few screen flickers. Then one of two things happens:1) I get a scrambled up pixelated image (not sure what it is) for about 3 second, then it goes into the login screen and I can log in normally.2) I get the scrambled up pixelated image and it hangs. This happens about 4 times out of 5 when rebooting.
I do have an nVidia card and a beta driver (they published it the 21st, I believe, of this month) but this happened long before that. It's happened ever since I installed any of the drivers (I've tried a couple different versions, hoping to fix this) for my card.
My system is a frankenputer:
Phenom II quad core 3.0 cpu
nVidia GeForce BFG 6600
4G DDR3
500G drive
Note: I do have 3D rendering when I finally get into the desktop. Everything works great, except that when I'm playing my mmorpg, Regnum Online, it freezes the entire computer and I have to reboot (not sure if that has anything to do with it or not).In case it's needed, this is my grub:(Second note: I'm sorry for the length of the post but I don't know how to upload documents/files to show)
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
[code]...
View 1 Replies
View Related
Aug 28, 2010
When I boot up my laptop whith memorycards in the slots the boot hangs at "Wating for /dev to be fully populated", "Activating swap" or somewhere in between.If I take out the memorycards so the slots are empty, the laptop boots just fine...Its a CFCard and a SDcard in a PCIMAslot.Does anyone have a clue?Its not a big problem just very annoing to have to take out the memcards all the the time.
View 4 Replies
View Related
Apr 20, 2010
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
View 9 Replies
View Related
Nov 13, 2010
I have a 1TB external USB drive that I'm having a lot of trouble with.
First I created a 500G partition, then formatted it with ext3. That went as expected.
Then I tried to copy a large (~50G) archive to it, and at about 13G it just stopped. I was using "watch" to view the progress, and it just stopped suddenly. I left it for quite a while, to see if it was actually doing something, just slowly, but nothing.
I tried to kill the copy command, but it wouldn't die. I killed the parent processes, and it just kept moving up the process tree until init was its parent. I tried rebooting.. I got the message "system is going down for reboot now", then the first few messages of the reboot process, and then it just stopped at "unmounting local filesystems". Again, I left it for a while, nothing. I ended up hard booting it.
After rebooting, I recreated the partition, then tried formatting it. This time it started writing inode tables, then just stopped at a certain point. I think at 133/4001. Again, I left it for a while and it didn't move.
Again, I tried killing the process and it moved up the tree until init was its parent. Rebooting hung at the same place, and again had to hard boot it.
This time I deleted the partition and tried creating a small partition - 500M. mkfs formatted it as expected, and I was able to mount and write to the partition.
I deleted the small partition, and tried creating a larger one - 100G this time. fdisk created the partition just fine (and did not complain or report any errors through this whole process), but again mkfs gets stuck.. this time at 34/801 inode tables. I haven't been timing it, but I want to say it's been at least 10 - 15 minutes.
dmesg reports some drive errors, but I'm not sure what they mean code...
View 2 Replies
View Related
Mar 14, 2011
would be great if somebody can help me suggest why RHEL6 installation does not start? If its a problem of disk drive,
View 2 Replies
View Related
