Ubuntu :: 10.10 Boot Hangs With HP Workstation Z600
Oct 22, 2010
I have a HP Workstation Z600 with a NVIDIA Quadro NVS 295 as graphic card. I have installed a ubuntu 32 bits 9.10, then upgraded to 10.04 and 10.10. Grub shows me 2 installed kernel : 2.6.31-22 and 2.6.35-22. When I boot with kernel 2.6.35, the startup hangs. I can just reboot the computer. When I boot with 2.6.31, ubuntu starts up, but the screen is not recognized, and I can just run in 800x600. I tried to install the nvidia driver which is provided with the distribution, but no luck (there is an error message).
So I tried to install the official NVIDIA driver, but it asks me to install linux source. This one is available for kernel 2.6.35 but not anymore for 2.6.31.Does someone has an idea of all my problems, and if possible, how to solve them ?
View 1 Replies
ADVERTISEMENT
Nov 29, 2010
How to install Ubuntu 10.04 on an Hp Z600 with raid 1
I am having trouble installing Ubuntu 10.04 on a HP Z600 with a two disc raid system. Is there a way to solve this without using the alternate cd (where the data files seem to be corrupted). The regular 10.04 cant find any drives on which to install, the 10.04 alternate cds all have corrupted files. I have tried downloading the .iso from two mirrors as well as from .torrent, all have data problems. The HASH checksums are fine, only the data on the burned discs are wrong. I have also tried using a USB install, but there are problems there aswell. At the moment I have win 7 on the disc as on the other partition, and have been using Ubuntu 10.10 (that is now an unbootable broken system), but have to downgrade to 10.04 becasue of software requirements.
The RAID seems to be an INTEL Raid . From HP homepage: Integrated 6 channel SATA 3 Gb/s controller with RAID (0, 1, 5 or 10) capability, optional SAS controller, LSI 3041E 4-port SAS/SATA, with RAID (0, 1 or 10) capability
View 1 Replies
View Related
Nov 29, 2010
I am having trouble installing Ubuntu 10.04 on a HP Z600 with a two disc raid system. Is there a way to solve this without using the alternate cd (where the data files seem to be corrupted). The regular 10.04 cant find any drives on which to install, the 10.04 alternate cd�s all have corrupted files. I have tried downloading the .iso from two mirrors as well as from .torrent, all have data problems. The HASH checksums are fine, only the data on the burned discs are wrong. I have also tried using a USB install, but there are problems there aswell. At the moment I have win 7 on the disc as on the other partition, and have been using Ubuntu 10.10 (that is now an unbootable broken system), but have to downgrade to 10.04 becasue of software requirements.
The RAID seems to be an INTEL Raid . From HP homepage: Integrated 6 channel SATA 3 Gb/s controller with RAID (0, 1, 5 or 10) capability, optional SAS controller, LSI 3041E 4-port SAS/SATA, with RAID (0, 1 or 10) capability
View 1 Replies
View Related
Dec 11, 2015
I have an hp z420 workstation. I bought 8x4Gb of 1600MhZ, ECC unbuffered memory.
Something weird happens now: I tested each individual RAM module by booting my machine with only that module inserted. They are all fine.
However, when I insert all of them, my machine does not boot (and the fan goes crazy).. In particular, the problem happens when I insert any RAM module into a specific slot.
Right now I am using my machine with 7x4Gb of ram, and it is fine. Does it mean I have a hardware problem with one of the sockets?
View 8 Replies
View Related
Feb 13, 2011
I just received a new workstation from a vendor with Fedora14 supposedly installed in it. The problem is, it does not boot up properly. Although I've contacted them to resolve the problem, I thought I'd ask here to see if I can expedite things. Bottom line, the machine goes through the boot-up process, but only so far. Rather than getting to the log-in screen, I only see a white bar at the bottom of the screen, with "Fedora14" adjacent to it. Is there a way that I can get into the set of configuration menus for setting up the OS? They neglected to include the source disks with the system, if that is what is required.
View 1 Replies
View Related
Feb 7, 2011
I am an intermediate linux user. However, I know nothing about solaris. I am trying to install Debian Sparc on a sun blade 2500 workstation. I was told it should work. I am able to go through the debian installation process but when the box reboots it does not boot into Debian. I have now gone through the debian install process several times and now it saids there are too many primary partitions. I tried a rescue install but it saids there are no partitions installed on disk? What am I doing wrong? I am curious if I need to pass a specific argument at the command line to boot into silo? I cannot find any relevant guidance online about this problem and I cannot believe I am the only one to stumble here.
View 1 Replies
View Related
Aug 7, 2010
I'm unable to boot the LFS-6.6 which i've built on a vmware workstation 6.5. i had no trouble in installing all the packages and have managed to run all the test suites successfully w.r.t stable LFS-6.6. while booting i get 'kernel panic' and it says unknown device /dev/sda1 and unknow block (0,0). i've only one primary partition without any swap partition. i've a label assigned to /dev/sda1 and have included it in my fstab file. device.map shows 2 entries:
One for the floppy and the other for my harddisk which is- hd0 /dev/sda. this is for the 2nd time i'm stuck at a point after perfectly installing all the stuff as mentioned in the LFS-6.6 book. i've also noticed on this website the many users have similar type of issue. it would be great if somebody could help me.
note: while configuring the linux, i've inbuilt everything required for my system, including support for ramfs and other required filesystems, scsi driver etc.
My host machine is on a intel core 2 duo processor. my virtual scsi hard disk is 3 GB in size and is a ext3 fs. scsi is configured with LSI Logic which is recommended by vmware while adding an hard-disk.
View 14 Replies
View Related
Apr 25, 2011
I got a new Lenovo S20 and I am having trouble loading Linux. I've loaded these variants with no success:
Ubuntu desktop
Ubuntu server
Linux Mint
CentOS
vmWare esxi
The live CD's run, and very nicely at that. But once I install to the workstation they won't boot. I just get a blank screen. I've tried different bootloaders.. I've toyed with different BIOS settings.. I've even installed to different drives (a hard disk and an SSD). Maybe a hint: BSD installs and runs with no problem at all. I have PC-BSD running at the moment. It's nice, maybe I'll keep it. But I'd rather have Linux.
My amateur computer science mind sees this as not a boot loader issue (recovery mode shows Linux seems to be loading to a point.. but I can't see the script line just before the lockup) not graphics related; UB Server and vmWare are text-only and they won't load either probably not a bios issue (liveCDs run and other people run Linux on S20s) not hardware (Windows and BSD run on this one)
View 1 Replies
View Related
May 25, 2010
I'm running Ubuntu 10.04 and a small Windows 7 partition (cuz I can't get Ubuntu to run my MSI TV@nywhere plus card but that's another issue).I can log into Windows fine. If I choose Ubuntu, however, the boot process will go thru a few screen flickers. Then one of two things happens:1) I get a scrambled up pixelated image (not sure what it is) for about 3 second, then it goes into the login screen and I can log in normally.2) I get the scrambled up pixelated image and it hangs. This happens about 4 times out of 5 when rebooting.
I do have an nVidia card and a beta driver (they published it the 21st, I believe, of this month) but this happened long before that. It's happened ever since I installed any of the drivers (I've tried a couple different versions, hoping to fix this) for my card.
My system is a frankenputer:
Phenom II quad core 3.0 cpu
nVidia GeForce BFG 6600
4G DDR3
500G drive
Note: I do have 3D rendering when I finally get into the desktop. Everything works great, except that when I'm playing my mmorpg, Regnum Online, it freezes the entire computer and I have to reboot (not sure if that has anything to do with it or not).In case it's needed, this is my grub:(Second note: I'm sorry for the length of the post but I don't know how to upload documents/files to show)
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
[code]...
View 1 Replies
View Related
Aug 15, 2010
In Ubuntu 10.04 I installed VMware workstation 7.1 to run a VM - everytime I need to run it though, Workstation doesn't find a file (VMmon) and I need to run in terminal this command: sudo /etc/init.d/vmware start
How can I add this in the boot file so it starts automatically and I do not have to run it manually -
View 1 Replies
View Related
Aug 28, 2010
When I boot up my laptop whith memorycards in the slots the boot hangs at "Wating for /dev to be fully populated", "Activating swap" or somewhere in between.If I take out the memorycards so the slots are empty, the laptop boots just fine...Its a CFCard and a SDcard in a PCIMAslot.Does anyone have a clue?Its not a big problem just very annoing to have to take out the memcards all the the time.
View 4 Replies
View Related
Apr 20, 2010
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
View 9 Replies
View Related
Aug 26, 2010
I upgraded from 8.04 to 10.04 LTS. Now when booting it hangs and drops me to a initramfs shell. This is a scsi machine with 3 drives. The error I get before dropping to the shell is that the drive with the uuid in menu.lst does not exist.If I type "exit" at initramfs, it finishes booting in a couple of seconds. The uuid is correct and maybe this is a timeout error of some kind. This is a machine that I would want to reboot without having to walk over and type "exit" at the initramfs prompt.
View 3 Replies
View Related
Oct 11, 2010
I installed Maverick Meerkat today, and it was working great on the first boot (which is when I updated the system...). However, since then, it won't boot up. When I looked at the output during boot, I noticed that it hangs when it gets to:
Code:
floppy0: no floppy controllers found
After that, the hard drive access light on my laptop turns off and it just sits there.
View 9 Replies
View Related
Mar 6, 2011
I've just had the power cut out while downloading a bunch of updates for Ubuntu 10.4
I haven't updated to the latest release because I'm lazy and have slow internet.
Anyway, once power had been restored, I turned my desktop on to find that my install will not actually load. It boots up and goes to the purple 'Ubuntu' screen with the orange dots, and just sits there (for about 15 minutes so far) without any activity on-screen.
I'm running Ubuntu 10.4 as I said above, and I'd really like to get a solution that does not include 'start from a fresh installation', since I've had to really wrestle with this install to get my wireless adaptor (USB) and wacom tablet working properly.
View 1 Replies
View Related
Jan 5, 2010
Ubuntu server hangs when I boot with a wired Ethernet connection. The last thing I see in the console is code...
I have no problem when I boot to a Wifi connection even when Samba and openssh-server are installed. I see the same sequence of lines in the console as I reported initially (including Reloading, Restarting), but then the output continues with
* Starting the Winbind daemon winbind
Both the wired and wireless connections use dhcp. Obviously, I installed the OS using a wired connection, so it worked reliably once. I'm stuck.
P.S. I tried dhclient -r before rebooting. The machine did not shut down correctly and when I forced a reboot it appeared to hang at the usual place. However, after a long delay it proceeded to boot. Perhaps I am observing a delay due to a very long timeout. I will try another reboot now and check again in the morning.
View 2 Replies
View Related
Jun 17, 2010
I am looking to speed up my boot time; it is currently around the 2-2.5 minute mark from Grub to desktop (including about 15 seconds at the login screen while I type my password).
I have forced ureadahead to reprofile, and have rebooted a few times until the boot time is fairly stable/consistent.
No xorg errors and only one warning ((WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.)
However, dmesg reports the following:
Code:
...
[ 1.121369] Freeing unused kernel memory: 656k freed
[ 1.121926] Write protecting the kernel text: 4676k
[ 1.121977] Write protecting the kernel read-only data: 1840k
[ 1.146159] udev: starting version 151
[Code].....
View 9 Replies
View Related
Jul 3, 2010
I think I've got a graphics/sound compatibility issue--both are onboard, but have no idea what to do. 10.04 will run in recovery low-graphics mode but won't load otherwise.
I have an old Gateway MX6030 / MA2 from 2005, 1.4Ghz Celeron, 1024 MB RAM. It had 9.04 on it. I got it out, thinking I could use it to store and remotely access research files for Mendeley and backup other data from my primary machines. I was running into wireless connectivity programs, so rather than fix it I figured I'd upgrade to through to 10.04 and plugged it into the router. 9.10 was a little choppy with the sounds when booting up, but worked. 10.04 won't boot properly. It gets to the Ubuntu splash screen with the little dots, which all turn red, then goes straight to a grey screen. The hard disk stops thrashing, and that's it.
If I hit ESC to bring up the grub menu, I can enter recovery mode and use the low-graphics startup to get into 10.04. Sound is still choppy on startup, but wireless, video, etc. all work. I tried to use a USB bootdisks with both 10.04 and Xubuntu 10.04 and got the same issue. The Ubuntu live boot can get to the menu but freezes after I make a selection. Xubuntu just brings up a low-res "XUBUNTU" image and freezes right after that. Hard disk stops turning, and the machine stops accessing the USB disk. Nothing happens.
Is there a way I can access 10.04 low graphics as the default boot? Is this a driver issue? This is a beginner question, obviously, and really, my goal here is just to be able to access the machine remotely so I can keep files for Mendeley in a single place rather than across two machines and three OSes. I don't know if I have the time or patience to learn how set up another machine as an FTP server to try and install through that route.
View 1 Replies
View Related
Jul 25, 2010
I just recently installed ubuntu 10.04 and it works great! I got it to work with both of my printers, scanner, and zune! The problem is occasionally when I boot up ubuntu it stops and displays "[drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)"
View 2 Replies
View Related
Oct 14, 2010
With Mythbuntu 10.10, the Live CD hands before it can fully boot the OS to a GUI. I'm running an IBM ThinkCentre (P4 2.6Ghz, 512mb RAM) with an NVidia 6200, and I'm using an HD LCD TV for the display.
I've tried to use nomodeset but that hasn't helped it boot. I've tried disabling dmraid also but I end up getting this error: 'General Failure Mounting File Systems'. I've had no such problems with the previous 3 versions of Mythbuntu. Although I didn't have this TV when I installed those ones... could that be the issue perhaps?
View 1 Replies
View Related
Oct 22, 2010
I have ubuntu 10.04 installed on my MacBookPro7,1 (dual boot with reffit). Everything works fine. Today I closed my laptop and open it later again and saw a black screen with a blinking cursor. I was not able to send any keys to it. So I powered down (off button) it.
After Booting It I saw some kernel message, no errors, and then it stops and everything is freezed. Again no keystrokes can be send. The last kernel message is something about scsi. I tried to remove the "recordfail" in the grub2 menu but it doesn't help.
View 1 Replies
View Related
Dec 8, 2010
I loaded Ubuntu onto my USB using the USB installer, and then attempted to create a persistent drive (>4GB) according to the link :http://www.pendrivelinux.com/create-...per-partition/
But when I boot from the USB it hangs. I am new to Ubuntu, so I cannot give a lot of details.
When booting from the USB, it goes to the setup screen where I select boot from the USB. A list of commands appear on the screen (it's too quick,to read) and then it arrives at the intro screen with the Ubuntu symbol. On this screen it hangs.
Any suggestions on how to fix this.
View 4 Replies
View Related
Dec 25, 2010
I wrote the ISO to a USB drive I had using the Universal USB Installer, and I put it into my new Acer Aspire One D255 netbook, and set it up so that it would be the first thing it booted to. I got past the ISOLinux loading screen, and now it's just hanging at a black screen with a bit of text:
Intel(r)PineView PCI Accelerated SVGA BIOS
Build Number: 2001 Accelerated PC 14.34 03/01/2010 02:34:31
DECOMPILATION OR DISASSEMBLY PROHIBITED
Copyright (C) 2000-2003 Intel Corp. All Rights Reserved.
Anyway, it's just sitting there. The USB stick isn't doing anything, it's not flashing or jittering, it's just slowly pulsating like it usually is when it's not doing anything.
View 4 Replies
View Related
Mar 10, 2011
So I tried installing the nvidia drivers for my GeForce 330M using Jockey after I first installed 10.10, but it did not make it so my desktop was not bigger than my screen. So, I blacklisted nouveau by creating a text file which had in it:
blacklist nouveau
options nouveau modeset=0
Then I saved the file as disable-nouveau.conf, then chown(ed) it to be owned by root, and moved it to /etc/modprobe.d/
I then installed the driver for my nvidia card, and everything worked perfectly. But after installing the updates listed in the update manager, my computer won't even boot to the GUI desktop, it just hangs. I can still access the command line, but when press <ctrl-alt-F7>.
All I see is this:
fsck from util-linux-ng 2.17.2
//dev/sda1: clean 170760/29409280 files, 5091535/117623296 blocks
*Starting AppArmor profiles
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
*Setting sensors limits
speech-dispatcher disabled; edit /etc/default/speech-dispatcher
*Starting the Windbind daemon winbind
And that's it. It just hangs there. Like I said, I can still access the command line with <ctrl-alt-F1>, but I have no idea how to get Gnome I guess to display?
View 1 Replies
View Related
Apr 30, 2011
I was running 10.10 until this morning when I upgraded to 11.04.{Some minor grub complaints in the install but mainly due to me having customised the entries.}I rebooted and went to the new installation, it goes purple and says Ubuntu 11.04 with dots going across, then it hangs and goes to the background text and the last thing it says is "Checking Battery State.I'm on a desktop, so I'm sure the battery thing isn't an issue, it's probably something before or the next command that freezes it.
I booted into recovery mode repaired grub (no change) then went into failsafe graphics mode and it worked ok.My guess is that because failsafe graphics was ok, it might be to do with the graphics driver (ATI HD6970 fglrx driver) but I've no idea.
View 9 Replies
View Related
May 14, 2011
When I boot Ubuntu 11.04 it goes as far as showing me the OS options (I dual-boot with Windows7) and then what should be the login window. However - here it displays the mouse and nothing else. It just hangs. I can hit ALT-F1 and get a shell. I login and everything works as expected except X isn't running.
BACKGROUND: I tried to upgrade from 10.10 when (mid-upgrade) my computer turned itself off (suspect housemate unpluged it by mistake and then it ran out of battery). When I turned it on again, it refused to boot, complaining that the / drive was not there. After a bit of digging around I found that it was actually mounting / with read-only permissions. After remounting it with read/write permission I was able to continue with the upgrade. HOWEVER, I never managed to connect to the wireless from the command line (I tried all sorts, sudo iwconfig wlan0 essid "eduroam", sudo dhclient wlan0). Since it hadn't finished to download the new packages, I don't know what it did (presumably installed the ones it did have). Anyway, after doing this I rebooted and everything seemed to work - I logged in and (using update-manager) did a partial upgrade which seemed to work. The only problem was that it was now complaining that nautilus was not configured and for this reason it could not update a package called libglib2.0 or something like that. I tried to repair broken packages/reinstall nautilus etc nothing worked. I then rebooted (I don't remember why I thought that would be a good idea). Since it hasn't given me a GUI login window again. It just hangs, like I said.
View 4 Replies
View Related
Aug 21, 2011
I have an updated Ubuntu server and had problems with the windowmanger. Now treated the system and now it will not start anymore.
Symptom:
Starts up to "Checking battery state... // Running local boot scripts (etc/rc.local)
than it hangs.
> which logfile should I look in?
[Code]....
If I start X with startx a gray screen with a mouse X comes up, but there is nothing. No keystrokes or mouse buttons effects anything.
View 1 Replies
View Related
Sep 1, 2010
My old man wanted to try linux, and he got an Ubuntu install (ill check version tomorrow).Anyways, we installed it, but during boot of either it (going though a boot slector menu, hitting F it shows only two lines on the screen (something vaguely similar too):GRUB loading stage1.5GRUB error 21 (or 27 cant quite remeber)
I did, unfortunately, have to step out while it installed leaving him at the helm. now the main problem is this: Ubuntu will not boot, and neither will the previous (contained on a totally different harddrive) Windows XP. A third OS (Vista) still boots, but unfortunately my dad had all his apps on his XP drive. Now, the ubuntu we put on a third Hharddrive (Both Vista and XP boot from two IDE docks in the machine (one Primary master and one secondary master)), but the ubuntu was installed on an enclosed (In the case) SATA drive partition. it seemed to have installed but when selecting to boot form it, or the harddrive with the XP system, i get the above error. however, vista boots completely without problems. Anyone ever seen sometihng like this? the computer responds to no commands beyond ctrl-alt-delete at this lock up, and no dos/command prompt opens up. it just sits there at these two lines until either ctrl=alt=delete or a hard reset are pressed.
View 3 Replies
View Related
Jan 9, 2011
Sometimes when my machine tries to boot ubuntu it works SOMETIMES, but most of the time it hangs on a certain driver/message. I've disabled the silent splash to show you guys where it freezes.
Quote:
Marking TSC unstable due to TSC halts
Switching to clocksource hpet
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [T22] (67C)
[Code]....
And then it stops there. I think ATA_PIIX is some ubuntu ata driver, but I don't know why there since my hard-drive passes all the S.M.A.R.T tests.
Keep in mind it SOMETIMES, but not very often, boots.
Edit: This machine was used with Ubuntu 8.10 before, and possibly 9.04, but that was before they introduced Audio for Intel HDA's Sigmatel. This is also a clean install.
View 2 Replies
View Related
Apr 14, 2010
Basically the situation is that the boot hangs if my USB KVM switch is connected. The keyboard works fine through the KVM switch to access the BIOS menu and in the grub2 menu, but as soon as it starts to boot, I get a black screen with a white cursor on top which never goes anywhere.The weird part is that if I disconnect the KVM and reboot, it gets past this point and I can reconnect the KVM and both the mouse and keyboard work normally.However, even if I plug the keyboard in directly but leave the KVM plugged in, the boot hangs. Something about the fact that the KVM is connected (rather than not detecting keyboard) is causing the boot to stall.
The even weirder part is that this worked fine on my previous build, which was 8.04 upgraded sequentially to 9.10. But my system drive died so I rebuilt directly from 9.10 ISO and now this does work. I have tried downgraded to grub .97, I have tried switching between server and generic kernels.This seems to be the same issue reported in[URL]
View 4 Replies
View Related
