Ubuntu :: Install 10.04 On An Hp Z600 With Raid 1?
Nov 29, 2010
How to install Ubuntu 10.04 on an Hp Z600 with raid 1
I am having trouble installing Ubuntu 10.04 on a HP Z600 with a two disc raid system. Is there a way to solve this without using the alternate cd (where the data files seem to be corrupted). The regular 10.04 cant find any drives on which to install, the 10.04 alternate cds all have corrupted files. I have tried downloading the .iso from two mirrors as well as from .torrent, all have data problems. The HASH checksums are fine, only the data on the burned discs are wrong. I have also tried using a USB install, but there are problems there aswell. At the moment I have win 7 on the disc as on the other partition, and have been using Ubuntu 10.10 (that is now an unbootable broken system), but have to downgrade to 10.04 becasue of software requirements.
The RAID seems to be an INTEL Raid . From HP homepage: Integrated 6 channel SATA 3 Gb/s controller with RAID (0, 1, 5 or 10) capability, optional SAS controller, LSI 3041E 4-port SAS/SATA, with RAID (0, 1 or 10) capability
View 1 Replies
ADVERTISEMENT
Nov 29, 2010
I am having trouble installing Ubuntu 10.04 on a HP Z600 with a two disc raid system. Is there a way to solve this without using the alternate cd (where the data files seem to be corrupted). The regular 10.04 cant find any drives on which to install, the 10.04 alternate cd�s all have corrupted files. I have tried downloading the .iso from two mirrors as well as from .torrent, all have data problems. The HASH checksums are fine, only the data on the burned discs are wrong. I have also tried using a USB install, but there are problems there aswell. At the moment I have win 7 on the disc as on the other partition, and have been using Ubuntu 10.10 (that is now an unbootable broken system), but have to downgrade to 10.04 becasue of software requirements.
The RAID seems to be an INTEL Raid . From HP homepage: Integrated 6 channel SATA 3 Gb/s controller with RAID (0, 1, 5 or 10) capability, optional SAS controller, LSI 3041E 4-port SAS/SATA, with RAID (0, 1 or 10) capability
View 1 Replies
View Related
Oct 22, 2010
I have a HP Workstation Z600 with a NVIDIA Quadro NVS 295 as graphic card. I have installed a ubuntu 32 bits 9.10, then upgraded to 10.04 and 10.10. Grub shows me 2 installed kernel : 2.6.31-22 and 2.6.35-22. When I boot with kernel 2.6.35, the startup hangs. I can just reboot the computer. When I boot with 2.6.31, ubuntu starts up, but the screen is not recognized, and I can just run in 800x600. I tried to install the nvidia driver which is provided with the distribution, but no luck (there is an error message).
So I tried to install the official NVIDIA driver, but it asks me to install linux source. This one is available for kernel 2.6.35 but not anymore for 2.6.31.Does someone has an idea of all my problems, and if possible, how to solve them ?
View 1 Replies
View Related
Feb 28, 2011
If I have a windows installed in raid-0, then install virtualbox and install all my linux os,s to virtualbox will they be a raid-0 install without needing to install raid drivers?
View 1 Replies
View Related
Feb 1, 2011
Could any RAID gurus kindly assist me on the following RAID-5 issue?I have an mdadm-created RAID5 array consisting of 4 discs. One of the discs was dropping out, so I decided to replace it. Somehow, this went terribly wrong and I succeeded in marking two of the drives as faulty, and the re-adding them as spare.
Now the array is (logically) no longer able to start:
mdadm: Not enough devices to start the array.Degraded and can't create RAID ,auto stop RAID [md1]
I was able to examine the disks though:
Code:
root@127.0.0.1:/etc# mdadm --examine /dev/sdb2
/dev/sdb2:
Magic : a92b4efc
Version : 00.90.00
code....
Code:
mdadm --create --assume-clean --level=5 --raid-devices=4 /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2
As I don't want to ruin the maybe small chance I have left to rescue my data, I would like to hear the input of this wise community.
View 4 Replies
View Related
Mar 1, 2011
Installing Ubuntu 10.10 desktop.on a Highpoint rocketraid 2642.Installing Ubuntu, it does not find the drive?How do I install the drivers to install and boot after the installation from the raid drives?
View 1 Replies
View Related
Jul 20, 2010
I cannot install 11.3 on a machine with an intel raid controller I have tried with raid 1 using the card and then setting the disks to individual raid 0 and letting suse raid them. With the card doing it the machines crashes as soon as it tries to boot the first time, with suse doing the raid I just get 'GRUB' on the screen It seems a lot of people are having similar problems, does any one have any pointers. 11.2 installs fine. I would try and do a bug report but every time I go to the page it's in Czech
View 4 Replies
View Related
Jul 18, 2011
I have a raid5 on 10 disk, 750gb and it have worked fine with grub for a long time with ubuntu 10.04 lts. A couple of days ago I added a disk to the raid, growd it and then resized it.. BUT, I started the resize-process on a terminal on another computer, and after some time my girlfriend powered down that computer!
So the resize process cancelled in the middle and i couldn't acess any of the HDDs so I rebooted the server.
Now the problem, the system is not booting up, simple black with a blinking line. Used a rescue CD to boot it up, finised the resize-process and the raid seems to be working fine so I tried to boot normal again. Same problem. Rescue cd, updated grub, got several errors: error: unsupported RAID version: 0.91. I have tried to purge grub, grub-pc, grub commmon, removed /boot/grub and installed grub again. Same problem.
I have tried to erased mbr (# dd if=/dev/null of=/dev/sdX bs=446 count=1) on sda (ide disk, system), sdb (sata, new raid disk). Same problem. Removed and reinstalled ubuntu 11.04 and is now getting error: no such device: (hdd id). Again tried to reinstall grub on both sda and sdb, no luck. update-grub is still generating error about raid id 0.91 and is back on a blinking line on normal boot. When you'r resizeing a raid MDADM changed the ID from 0.90 to 0.91 to prevent something that happend happened. But since I have completed the resize-process MDADM have indeed changed the ID back to 0.90 on all disks.
I have also tried to follow a howto on a similar problem with a patch on [URL] But I cant compile, various error about dpkg. So my problem is, I cant get grub to work. It just gives me a blinking line and unsupported RAID version: 0.91.
View 2 Replies
View Related
Jun 29, 2011
migrate an installed Ubuntu system from a software raid to a hardware raid on the same machine? how would you go about doing so?
View 1 Replies
View Related
Nov 26, 2010
I have installed Ubuntu on my m1530 since 8.04 and currently dual boot Win7 and 10.10. I would like to dual boot on my PC, but I have run into a problem. I am not a pro at Ubuntu, but this problem I can not solve by reading forums like I have in the past.
I realize this is a common problem, but I have noticed people having success.
I have a M4A87TD EVO MB with two Seagate drives in Raid 0. (The raid controller is a SB850 on that MB) I use the raid utility to create the raid drive that Windows7x64 uses. I have 2 partitions and 1 unused space. Partition 1 is Windows, partition 2 is for media, and the remaining unused space is for Ubuntu.
I am running ubuntu-10.10-desktop-amd64 off a Cruzer 16GB flash drive that was installed via Universal-USB-Installer-1.8.1.4.
My problem like so many others is that when I load into Ubuntu, gparted detects two separate hard drives instead of the raid. I read that this is because kpartx is not installed on 10.10. I then went in LiveCD mode and downloaded kpartx from Synaptic Manager. Gparted still reported two drives. I opened terminal and run a few commands with kpartx. I received an error. (Forgive me I didn't write it down, but I believe it said something about a communication error. I will try again later and see.)
Currently I am reflashing the Cruzer with a persistence of 4GB. I am not familiar with this process, but I understand that my LiveCD boot will save information I download to it. I decided to try this method because I was going to install kpartx and reboot to see if this made a difference.
I am looking for any suggestions on a different method or perhaps someone to tell me that the raid controller or some hardware isn't supported. I did install ubuntu-10.10-alternate-amd64 on my flash drive, but fail to get past detecting my CD-ROM drive since it's not plugged in. If this method is viable, I will plug it in. I also watched the ..... video were a guy creates Raid 0 with the alternated CD, but it wasn't a dual boot and didn't use a raid controller from a MB.
View 6 Replies
View Related
Mar 27, 2010
I'm running Karmic Server with GRUB2 on a Dell XPS 420. Everything was running fine until I changed 2 BIOS settings in an attempt to make my Virtual Box guests run faster. I turned on SpeedStep and Virtualization, rebooted, and I was slapped in the face with a grub error 15. I can't, in my wildest dreams, imagine how these two settings could cause a problem for GRUB, but they have. To make matters worse, I've set my server up to use Luks encrypted LVMs on soft-RAID. From what I can gather, it seems my only hope is to reinstall GRUB. So, I've tried to follow the Live CD instructions outlined in the following article (adding the necessary steps to mount my RAID volumes and LVMs). [URL]
If I try mounting the root lvm as 'dev/vg-root' on /mnt and the boot partition as 'dev/md0' on /mnt/boot, when I try to run the command $sudo grub-install --root-directory=/mnt/ /dev/md0, I get an errors: grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea. grub-setup: error: Embedding is not possible, but this is required when the root device is on a RAID array or LVM volume.
Somewhere in my troubleshooting, I also tried mounting the root lvm as 'dev/mapper/vg-root'. This results in the grub-install error: $sudo grub-install --root-directory=/mnt/ /dev/md0 Invalid device 'dev/md0'
Obviously, neither case fixes the problem. I've been searching and troubleshooting for several hours this evening, and I must have my system operational by Monday morning. That means if I don't have a solution by pretty early tomorrow morning...I'm screwed. A full rebuild will by my only option.
View 4 Replies
View Related
Dec 13, 2010
Did a CD install, 64 bit Ubuntu 10.10 on Intel dx38 MB with Intel raid on two 160g drives.
I setup the raid drives (raid 1 mirrored) prior to installing. Install went without problems. On reboot the volume will not boot. I brought up again from CD and the volume is clean and mountable. There are two partitions - dm-1 and dm-2 swap
What can I do to make this boot?
View 1 Replies
View Related
Feb 21, 2010
I already have a 300 GB SATA drive with Ubuntu 8.04 installed on it. It is currently running off my mobo's onboard SATA 1.0 Raid Controller. I recently purchased a SATA 2.0 Raid PCI controller that I will be putting in the computer and 2 new 750 GB Western Digital Caviar Green Hard drives. I wish to add the two drives in a Raid 1 configuration to store all my Pictures, Files, and Movies on. Every instruction and tutorial I can find on setting up Raid on Linux assumes you are performing a fresh install on Linux and gives no tips or instructions for current installations. I already have Ubuntu installed and do not wish to have to reinstall it. I want to leave my installation on the 300 GB drive and just add in the 2 750GB drives for storage.
View 1 Replies
View Related
Jun 22, 2010
I tried to install new ubuntu on Intel raid 1 system but it said that:
Quote:
The ext4 file system creation in partition #1 of Serial ATA RAID isw_chibcceegh_Volume0 (mirror) failed.
My config is:
P5Q Pro
2x500 GB Seagate HDD
Intel Raid 1
Boot ubuntu from USB Drive (Wonder does this cause the problem?)
View 9 Replies
View Related
Jul 19, 2010
I have an old Fedora machine setup to use Raid-1. I'm trying to install Ubuntu 10.04 Desktop on it, but the installer can't seem to override the raid partition. I have two 80GB drives, but the "Prepare disk space" screen only shows one 80GB partition called "/dev/mapper/isw_dfafhagdgg_RAID_Volume01". When I selected "Erase and use the entire disk", it gives me the error "The ext4 file system creation in partition #1 of Serial ATA RADI isw_dfafhagdgg_RAID_Volume0 (mirror) failed".
So I tried going back and specifying partitions manually. However, it only shows me the one device /dev/mapper/isw_dfafhagdgg_RAID_Volume01, and I can't delete it to get my original two hard drives, so I can recreate a RAID-1 setup. What am I doing wrong? I thought Ubuntu supported software RAID-1?
View 9 Replies
View Related
Jul 27, 2010
I have a system with RAid 0 with Windows 7. I want to load Ubuntu on a stand alone disk. I have two disks obviously for my raid o, two storage disks and an extra disk for ubuntu. I have tired to install unbuntu but upon start up I get an error on the disk. I than had to use grub to repair my mbr. My question is how do I make this work where I can have a dual boot system. I have been running ubuntu on my laptop .
View 2 Replies
View Related
Apr 3, 2011
I am trying to install Ubuntu 10.10 desktop alongside windows 7 on my 2TB Nvidia Raid 0 HDD's but when i select where to install the OS on the ubuntu installation it sees through the raid and only shows the HDD's and no partitions. is there any way to install ubuntu without having to take off Raid?
View 9 Replies
View Related
May 11, 2010
how to install a RAID 5 ?
I have 4 harddisks
View 4 Replies
View Related
Mar 22, 2011
How long does hardware Raid card (raid 1, 2 drives)take to mirror a 1 TB drive (500gb used)?Is there a general rule of thumb for this?4 hours? 12 hours? 24 hours?
View 1 Replies
View Related
Aug 3, 2010
I am trying to connect a RAID Box to the server via LSI 8880EM2 RAID controller.The raid box is FUjitsu Externus DX60 with raid 1 configured.The server is Fujitsu Primergy SX300 S5 with LSI 8880EM2 RAID card.The external raid box is being recognised by the raid controllers bios.
The server runs CentOS 5.5 64bit. I have installed the megaraid_sas driver from LSI website and MegaCLI utility but CentOS still fails to see the box.MegaCLI utility, when launched from CentOS, recognises the raid box, CentOS does not(no mapping being created in /dev).
I have also tried to create a logical RAID0 HDD on one physical HDD(as seen by MegaCLI) with MegaCLI utility in CentOS.The result was success and the new logical drive could have been used, but when restarting the server, the controllers' bios fails with an error (not surprised(one logical RAID0 on one physical HDD)) and configuration is being erased.
Has anyone tried connecting 8880EM2 controller to a raid box with raid configured on the box, running it all under CentOS and what were the results.
View 3 Replies
View Related
Jun 12, 2010
I have two 1TB hard drives in a RAID 1 (mirroring) array. I would like to add a third 1TB drive and create a RAID 5 with the 3 drives for a 2TB system. I have ubuntu installed on a separate drive. Is it possible to convert my RAID 1 system to a RAID 5 without losing the data? Is there a better solution?
View 1 Replies
View Related
Feb 16, 2010
First off I'd like to say I'm very new to Ubuntu, so I'm still trying to learn.I have a K8 motherboard with an adaptec U320 SCSI card with RAID ability.To that card I connected two 15k RPM 35 GB Maxtor SCSI drives.For some reason I'm not able to install Ubuntu 9.10 onto these drives with both drives in RAID 0.With both drives separately configured Ubuntu doesn't even see them.I have by the way run Windows XP and 2000 succesfully on these drives in Raid 0 configuration.I set up the array in the card's bios as bootable with write cache enabled.The system's bios sees the array as the array to boot from.Ubuntu (both standard and alternate) sees the array and I have tried to install Ubuntu on it by manually partitioning it or having me guide it with or without LVM.I tend to delete and rebuild the array between attempts so I have a clean slate to start from every time I try.
I have no other drives (except the CD of course) installed on this computer.The whole installation goes very well untill the end where I get a message that it could not install the boot loader (grub?).Every single time I've tried to install Ubuntu in all sorts of ways onto my RAID 0 array I have run into problems installing that boot loader, and I've tried that card and those disks in another computer as well.Tomorrow I'd like to try to manually set up the partitions with a small /boot partition on a standard hard drive with / on the array, but if somebody please has any idea's on how I might get it working without having to rely on another hard disk (which might not even work of course)
View 9 Replies
View Related
Sep 13, 2010
on my pc, that was running WinXP, I thought of installing Ubuntu. (I did install linux already a few times in the past years and use it on another couple of pcs) But something went wrong. This machine has 2 x 200MB maxtor drives, in raid 0 configuration, supported by the motherboard Nvidia chipset, and working well in Windows. When ran the live Ubuntu 10.04 cd, gparted was not able to access the drives in raid configuration, until I installed the mdadm and kpartx packages then the existing data became visible. So after that initial moment I thought all was ok and proceeded to install Lucid on the machine, dual booting with Windows. I did partition manually so that in my 400GB raid drive there is an 80GB NTFS partition with WinXP, a 90GB extended partition for Linux Ext4 and Swap and then a last NTFS 200GB partition for data. All went well, but now on restarting the computer nothing happens, nothing loads, Grub is not showing, and it looks like I cannot launch Linux nor Windows. All the data from WinXP and the Ubuntu installation seems to be on the disks but the pc is just not booting. I suppose the problem is with the raid configuration that is not handled properly during the installation, but is there anything that I can do now, apart from reinstalling Windows Xp or installing Ubuntu in a non raid configuration?
View 9 Replies
View Related
Nov 17, 2010
I have 10.04.1 on my server with a 250gb sata drive. I have all my files on this hard drive. I'm running out of space so I have another 250gb sata drive I need installed. I want to create raid 0 so I can expand my servers hard drive space. I don't want to lose my data on original hard drive or reinstall to create the raid. Is there a way to achieve this with mdadm without altering the first hard drives data?
View 2 Replies
View Related
Nov 27, 2010
I have two Ubuntu 8.04 servers currently. I've purchased some 500 GB hard drives and a RAID cage just yesterday and plan to change my current servers to using RAID1 with the hard drives. Much like everyone else, I have the nVidia RAID built onto the motherboard that I plan to use. There are many how-to's out there on how to setup RAID using dmraid during the install process - but what would a person do if they are simply changing over to a RAId system? I installed dmraid a few days ago on the server. It seems that even though I have RAID shut off in the BIOS, it saw the one and only drive as a mirrored array. When I rebooted today, the server would not start; it had ERROR: degraded disks.. bla bla. Then Grub tried to start the partition based off the UUID of the drive (which was not changed) and it said "device or resource busy" and would not boot.
This problem was corrected by going into the BIOS and turning on RAID. When I rebooted, the nVidia RAID firmware started and said degraded. I went in there and deleted the so-called mirror keeping the data intact. Rebooted, disabled the RAID feature in the BIOS and then the server loaded normally with a message "NO RAID DISKS" - but at lest it did boot! So this leads me to believe that trying to turn on a RAID-1 array (just mirror between two disks) may be a challenge since I already have the system installed. I will be using Partimage to make an image of the current hard drive and then restore it to one of the new drives.
The next question is - is it a requirement that dmraid is even installed? While I understand that the nVidia RAID is fake-raid - if I go into the nVidia RAID controller and setup the mirroring between the two disks before I even restore the files to the new disk, will both drives be mirrored? However, I do think that I'd probably have to have dmraid installed to check the integrity of the array. So, I'm just a bit lost on this subject. I definitely do not want to start this server over from scratch - so curious to know if anyone has any guidance on simply making a mirrored array after the install procedure, what kind of Grub changes will be needed (because of the previous resource is busy message), and whether installing dmraid is even a requirement.
View 9 Replies
View Related
Oct 30, 2010
I have the newest Ubuntu installed on my machine. It currently has a 160GB sata drive. I just bought two shiny new 2TB drives that I want to RAID as 4TB. How do I go about adding these two hard drives even though install is complete? I want the 4TB assigned to my /home directory.
View 4 Replies
View Related
Jul 18, 2009
how can I create RAID 1+0 using two drives (one is with data and second one is new). Is it possible to synchronize data drive with empty drive and create RAID 1+0 ?
View 3 Replies
View Related
Aug 19, 2010
We've started using Debian based servers more and more in work and are getting the hang of it more and more every day. Right now I'm an ace at setting up partitions, software RAID and LVM volumes etc through the installer, but if I ever need to do the same thing once the system's up and running then I become unstuck.
Is there any way I can get to partman post-install, or any similar tools that do the same thing? Or failing that are there any simple guides to doing these things through the various command line tools?
View 4 Replies
View Related
Dec 14, 2009
I have got a mid-aged server which i upgraded with a simple SATA-Raid-Controller with a VT6421A chipset.I attached two Samsung 750 GB Hard disks and created directly after the POSt screen a nice Raid 1 array. Ubuntu will recognize it as well as windows (which I would never ever use... ;-)).SuSE 11.1 (we need this OS for confirmity) will simply just recognize both disks in the partitions overview. The point "RAID" remains empty.
Are there any hints out there how I can enable the whole raid stuff in open suse? Do I need to integrate other drivers / modules to get thinks working?
View 3 Replies
View Related
Nov 16, 2009
I've got a couple of boxes (one linux and one Win Vista) that I want to enable the hardware RAID 1 (mirrored drives). I've not worked with RAID before. I don't really know much about RAID, but from what I've gathered from google, it seems like I may have to enable the RAID first in the BIOS and then reinstall. Is that correct or is there a way to enable the onboard RAID without reinstalling? I was hoping to clone the drive with dd and then enable RAID 1 in the bios and viola! Since one of the machines is my parents' (the Vista box), I'd prefer to do something non-destructive. I may just setup a backup mechanism for them where at least they have the data files backed up to the other drive. If I have to reinstall mine (Debian Lenny), I may bite the bullet and do the reinstall.
View 5 Replies
View Related
