I would like to use a linux box to display message in big big big into the monitor in something nice.
Freevo like would be great [url]
Big fonts and fullscreen to display it... would be perfect.
how to program in C or C++, but I'm pretty decent with python ( I've only used this on Windows ) and I was wondering if there was a way I can display my notifications like that as well. If you could just tell me what causes these messages to display like this I'm sure I could do some investigating of my own.
View 5 Replies View Relatedwhich will show a png from GIMP on the screen in fullscreen mode. I was using GIMP and there is an option to save my image as an .h or .c file. I tried .h and it saves it as some kind of very large variable. I want to call this from my own C program and display it on the screen.
View 1 Replies View Relatedsince some update to the latest Flash, I've been getting a weird issue. If I'm watching a flash video in fullscreen (via firefox) and hit "esc" to leave full screen, about 20-40% of the time it will screw up the monitor's display of everything. The entire screen gets weird white and colored pixels randomply all over the screen (see the attached picture). Restarting is the only thing that fixes this. I tried logging out and back in but the issue remains. I have two questions:
1. How do I fix this without a restart?
2. What could be causing this?
Need a Linux solution for looped slideshow from pictures in some folder. Pictures may be deleted and added, so it's a bonus if it doesn't stop/crash if currently shown picture is deleted.
View 3 Replies View RelatedI have two Ubuntu 10.4 machines (and Ubuntu continues to hide more and more xorg.conf config such that I no longer know where to find it). One is a laptop running dual headed - DP1 is the internal screen, and VGA1 is an external monitor; both are running at 1600x900. The other machine is a desktop running both VGA1 and HDMI1 (which is actually a display port with a DVI adapter) at 1600x900. So in both instances my desktop is 3200x900. I run a VNC server on the laptop and connect to it (via SSH tunnel) from the desktop - when I press the full screen hot key, I get a 1600x900 view of the remote machine on one monitor, and half of my local desktop on the other monitor - the "full screen" only expands to fill one local monitor.
Normally this is exactly what you want when you full screen a web browser, email client, or other application. I'm sure there's some X magic to make it clear what a full screen actually entails, and the vnc client application is just dutifully accepting what it's told. While I would like to keep the normal full screen behavior for regular applications, but when I'm VNCing to another 3200x900 machine, I'd really like full screen to stretch across both local displays. Resizing the window to be "close" isn't quite good enough since I still have local panels at the top and bottom of one display (though I can set them to autohide), plus the VNC client application window border (since it doesn't appear to respect -notitle).
Is there any good way to have X lie to a single application about the "full screen" size? Can I get it to lie to all applications? xrandr --noprimary appears to have no effect.
I'm running a fullscreen display app which shows a 3D scene in OpenGL. The app runs continiously throughout the day unattended.
Here's the sequence of events in how it's loaded:
1) The computer is turned on, and boots into F11 (x86_64)
2) A non-privileged user is automatically logged on
3) The gnome startup applications list contains an entry for a loading script
4) The loading script waits for the network interface (eth0) to ccome up, then starts the display program
This all works just fine, except that about 30 minutes after the computer is turned on and the app starts running, the screen blanks out. Attaching a mouse to the system and moving it around a bit brings the screen back to life. Likewise, SSHing into the machine and killing / restarting the application works as well. Once either of these fixes has been performed, it runs flawlessly for the rest of the day.
I have turned off the screen saver, and set the power settings for monitor shutdown to 'never'.
I am working on a gym class display screen which was built by others. It is operated under Ubuntu. Everytime I click on Firefox, the page goes to fullscreen, but the problem is that the gym class display is not zoomed to full screen (which is what we need). there are black blank parts on both the right and the bottom of the screen.There is no shortcut key working under firefox either, which means I can't zoom the screen or even enter url for any websites.I checked the gym class website on my computer, everything looks perfect. I think there must be some setting wrong on the operating machine.
View 3 Replies View RelatedI'm running nxfree to log into my remote xubuntu PC from my local xubuntu laptop since the X protocol was broken.Has been working fine. Recently upgraded from Lucid 32bit to Maverick 64bit Xubuntu.Now when I run nxclient in fullscreen mode, if I minimize the window (or just log out) my local display does not return.I'm left with just the background colour. The windows are still there but not visible. For example I can:* randomly right-click and a menu pertaining to the invisible window appears;* press alt-tab and cycle through the windows but activating one does not display it (it remains invisible);* press ALT-F and bring up the current active (but invisible) application file menu;Basically I press ALT-F and ALT-TAB and close everything and then log out and log back in to restore the windows/panels.
View 3 Replies View RelatedWe are trying to create a message forwarder program that receive a message on Port A and pass it on t Port B. Also receive a message from Port C and Pass it on to Port D as follows.
[Code]...
KMail 1.11.4, KDE 4.2.4: I'm migrating from WinXP to Mandriva, and installed KMail at the weekend. Works fine, but I have a niggle - the message list displays headers grouped by month order. I'd like the option of having a simple list (no groups), and suspect that it could be done - but I haven't been able to find out how. I've checked in the Handbook without success, and a search in LQ hasn't turned up anything yet.Any suggestions gratefully received. If this isn't the right place for a KMail query,
View 1 Replies View RelatedI'm trying to configure Freevo and can seem to find this directory "~/.freevo/local_config" .
My question is what does the Dot mean before freevo in the path ? and where is it pointing to I'am looking in the home directory but not seeing it ?
I have seen numerous reports of laptops heating up and the cause has been attributed to Linux. Is this a myth or is there some reality to this?
View 8 Replies View RelatedI've just done a clean install of Ubuntu 10.04 and installed Freevo on it from the Medibuntu repositories. After rebooting I get a shell window with no frame in the top-left corner of the screen with the Ubuntu loading screen still taking up the rest of the screen. Typing 'startx' gave a error that there is already a display running on the port.
View 2 Replies View RelatedI have an htpc running mythbuntu 10.04 connected to a plasma tv via hdmi. Initially i was able to boot fine and the front end loaded ok but the resolution was off. My display is 1024x768 but my only options in myth was to use 1024x720. I have since enabled the proprietary ATI video driver. Now my desktop dispay perfect on the tv. However, i can no longer start the mythtv front end. I also ran an update that updated over 100 packages.
View 1 Replies View RelatedIm trying to get sound to work in mplayer for my myth tv box. My hardware setup is a nvidia motherboard with hdmi (not used) and a geforce 210 with hdmi (that is used). The hdmi is connect to an external amplifier that should handle most things. Sound works fine in mythtv - the audio output device used is:
ALSA:hdmi:Card=Nvidia_1,DEV=1
When I try using the command line speaker-test utility it all works:
speaker-test -Dplughw:2,7 -c6
However, aplay and mplayer both dont give any sound - with neither outputting any error messages.
[code]...
I am thinking about buildinga box to be a dvr, so I did a search on myth tv. Back in 2009 Waterhead advised a questioner that he needed to be prepared for a steep learning curve to install myth tv. I am a relative newbie, is this still the case, or have newer releases such as Mythbuntu made it easier?
View 7 Replies View RelatedI have been working on this for all afternoon.I have found links here and elsewhere, with no solution.(currently) I am using crontab to execute the shutdown command based on a schedule. M-W, Th-Fr, and Sat.The message argument does not work. I need a Gui warning message before the Pc kicks the user off.Zenity does not work directly with crontab, so I put it in a script:#!/bin/bash Zenity --warning --text "The library is closing in 10 minutes. This PC will automatically shutdown in 5 minutes. Please save your work now, to prevent data loss."
View 1 Replies View Relatedbooting up the PC (Before or After user login) display an "Acceptable Usage agreement" with a OK button. The User must press OK to proceed. The Acceptable Usage agreement shows our companies System network policy. It can be easily done in a windows PC (Look Here). But I don't know how it is configure in ubuntu .
View 2 Replies View RelatedIt is bit unconvenient to see the mouse cursor while watching a movie. Is there some sort of removal of it?
here is my config:
Code:
.mplayer$ cat config
# Write your default config options here!
zoom=1
fontconfig = "1"
font = "dejavu sans"
[Code]...
I recently got the problem that Thunderbird does not displays the messages anymore. The e-mails are downloaded form the server, a new email warning is given, but the e-mail cannot be displayed (in fact it is not loaded in the message window. I could only see the TB start page). I cannot even see the old messages.
However, when use "see message source" I can see the e-mails.
I also noticed this message in the error console:
server does not support RFC 5746, see CVE-2009-3555
I use Fedora 12 + thunderbird 3.0.6-1
On another linux box F9+ThB 2.0.0 I do not have that issue.
Today I upgraded to Fedora 13 + TB 3.1.1. This should be the latest one, but I still cannot see the message.
Also, on F13 I got another issue with Firefox 3.6.7. When I switch between the tabs, the tabs will turn black and will not get back to normal for 10-15 sec. It looks liek a random effect because often only part fo the page turns black. This issue appear in the windows of TB 3.1.1 since updated to F13.
My hardware is a Sony SR49 laptop with ATI mobility Radeon HD3470
Have Google chrome and this black page issue is not present. The same with Evolution mail, but I do not like it.
I need to display a message before any login on a Linux box, either locally and for remote login via SSH. How can I achieve this? "issue" and "Banner" are the two concepts I need to use to provide a message for every user before they log into the system.
View 2 Replies View RelatedI have a Dell monitor attached to a Dell laptop. I am using Ubuntu 10.04 x64.
Spec:
Latitude E6500 : Intel Core 2 Duo P8800(2.66GHz,1066MHz,3MB)
Base Options : 256MB Nvidia Quadro NVS 160M Graphic Card 1 S
Display : 15.4in Widescreen WUXGA (1920X1200) 2CCFL
Dell 2001FP (attached using DVI)
When I try to boot into Ubuntu with the monitor attached I get a DVI: Cannot Display this Mode message on my monitor. I can boot into Ubuntu just fine if I detach the monitor. Have tried with VGA, but to no avail. I have the latest and greatest Nvidia drivers downloaded from the Nvidia web site. Googling indicates that this is a Dell problem, however, I am not sure about this. It worked just fine on my previous laptop (IBM T61) and Ubuntu 9.10, so I guess it has to do with the laptop and not Ubuntu 10.04.
I am running Ubuntu 10.04. for a few emails I receive thunderbird does not display the message body (header is OK). The emails where this happens are always emails where the message is there both as text/plain and as text/html as alternative. If I view the source, everything is there. I have tried to choose View->Original HTML / Simple HTML / Plain Text, but none of them worked.
View 6 Replies View RelatedI currently using Ubuntu 10.04 LTS.Whenever I try installing any new package(*.deb) it will display red error message that I don't understand.What happen? and how to solve this problem?
View 8 Replies View RelatedWhen you view mail in evolution in the vertical mode with the folders on the left, then the mail list in the middle and the message on the right, the mail list displays each message on two rows. But in thunderbird, the mail list is just in one row which means that much of the message header is not visible.
how to get thunderbird to display message lists using two rows per message?
I am using LuckyBackup to back up my laptop disk to a USB disk. I would like to display to the user the message "Please mount backup disk" and have the user click "OK". LuckyBackup has a feature to allow issuing commands before it does the backup. I have been investigating scripts (I have never written one.), but do not understand how to use them to this end.
View 4 Replies View Relatedi have a problem... after using gparted... to delete my ntfs part, and increase my linux partition, moving (by copying or deletin) SWAP and one other partition, used for system..i ended up having this message displayed on restartPHP Code:Error: file not foud.grub rescue> i will post ASAP a print screen of gparted maybe you can help me in sorting this outI would like NOT to reinstall ubuntu, but to find a sollution to this problem
View 9 Replies View RelatedI try to change locale for a program to run my native language with root. I don't know what I made, but can't open gui programs from konsole with root account.
It appear this error:
Code:
When type locale, it appear:
Code:
Yesterday I make run level 4 to skip typing startx in console, and login directly to KDE.
I am using Debian Lenny (5.0) and I would like to know how can we display a custom text message on the XDM login screen?
View 1 Replies View Related