Fedora Installation :: Updating - Error "rpmdb: PANIC: Fatal Region Error Detected; Run Recovery"
Nov 13, 2010
for some reason my first updating was interrupted and from then i cannot update. i get the following message:
rpmdb: PANIC: fatal region error detected; run recovery
error: db3 error(-30974) from dbenv->open: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
[root@laptop etc]# yum repolist
[Code]....
View 5 Replies
ADVERTISEMENT
Nov 12, 2009
I am getting an error from yum update and Kpackagekit:
[root@asus-m4n82 tylerm]# yum update
Loaded plugins: refresh-packagekit
Setting up Update Process
rpmdb: page 18816: illegal page type or format
[code]....
How do I "run recovery"? Edit: Ok so it looks like I had som bad ram in my system that caused this - I found a site that told me to do this:
rm -f /var/lib/rpm/__db*
rpm rebuilddb
yum clean all
I did this but now when I try something like yum install firefox it pulls in a ton of already installed packages.
View 2 Replies
View Related
Mar 2, 2010
When I deleted uninstalling and installing some packages in Yast2 I got this output:
Deleting mc
Additional rpm output:
rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_put: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) storing record "4.0-1" into Requireversion
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_get: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) setting "3.0.4-1" records from Requireversion index
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_get: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) setting "" records from Requireversion index
and on and on for 3 pages for every package.
View 4 Replies
View Related
Apr 13, 2011
I'm tring to run AMDOverdriveCtrl, since they don't have an RPM file for Fedora i tried to compile from source i followed the instruction in the readme files run the make command
Code:
% make
g++ -mwindows -s -pthread -lwx_gtk2u_richtext-2.8 -lwx_gtk2u_aui-2.8 -lwx_gtk2u_xrc-2.8 -lwx_gtk2u_qa-2.8 -lwx_gtk2u_html-2.8 -lwx_gtk2u_adv-2.8 -lwx_gtk2u_core-2.8 -lwx_baseu_xml-2.8 -lwx_baseu_net-2.8 -lwx_baseu-2.8 -ldl -o./Release/AMDOverdriveCtrl ./src/CFanSpeedPanel.o ./src/COvdrSettingsPanel.o ./src/CFanControlPanel.o ./src/CColorTempPanel.o ./src/BezierMath.o ./src/Color.o
[code]....
and tried to run the application, and i get this error message
Code:
$ AMDOverdriveCtrl
Fatal Error: Mismatch between the program and library build versions detected.
The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.4,compatible with 2.6), and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.6).
View 1 Replies
View Related
Apr 9, 2010
Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
View 4 Replies
View Related
Feb 20, 2010
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies
View Related
Jun 28, 2010
Code:
(with --nodeps --force) Error: Subprocess failed. Error: RPM failed: rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
[code]...
View 1 Replies
View Related
Apr 12, 2010
I migrated to Debian sid, but since then I got this error everytime I launch Update Manager (whether it's in graphical mode or from a shell). Just after putting down my root password, I got this error:
Title of the window: (as superuser) A fatal error has been detected in update-manager. Do you want to submit a bug report? Selecting No will close the application. Whether I click Yes or No, nothing happens.
View 10 Replies
View Related
Apr 8, 2011
Some files are generating in my Documents folder named hs_err_pid4214.log ........ different logs files are generated. I put the contents of one of them:
Code:
A fatal error has been detected by the Java Runtime Environment:
SIGSEGV (0xb) at pc=0x00007f1714b33e30, pid=4214, tid=139736470193920
JRE version: 6.0_24-b07
Java VM: Java HotSpot(TM) 64-Bit Server VM (19.1-b02 mixed mode linux-amd64 compressed oops)
Problematic frame:
C [libsvllx.so+0x82e30] _ZN26SvNumberFormatsSupplierObj18SetNumberFormatterEP17SvNumberFormatter+0x0
# If you would like to submit a bug report, please visit: [URL]. The crash happened outside the Java Virtual Machine in native code. See problematic frame for where to report the bug.
View 2 Replies
View Related
Mar 7, 2011
A fatal error has been detected by the Java Runtime Environment?
View 9 Replies
View Related
Feb 11, 2010
i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies
View Related
Sep 9, 2010
I have a system here that tends to have kernel panics during an linux installation, though I was able to perform a vista installation on the same hardware. Now I would like to ask what your suggestion for the cause of that problem is. Here a screenshot: [URL]
I suspect the hd to cause it:
-it is now over 7 years old
-smartctl displays over 16k read error and 0.5mio seek errors
(or are such high numbers normalfor that old disks?)
-the panic contains the string bad_area in the trace
But it might also be a RAM error, since the trace contains sth about page_fault and vista installs on the very same hdd and does not report any error messages (concerning the hardware, and I heard win doesn't complain about a bad RAM).
View 1 Replies
View Related
Aug 26, 2009
when ever i give yum update am geting this error. failed to use search generator: failure:repodata/318b9912817ec3309c6defc47d79e878c52a21fd1457d191bb ff060fdb7f7f8d-primary.sqlite.bz2 from rpmfusion-free-updates: [Errno 256] No more mirrors to try. I was trying to install tomcat using yum. Is there any way i can install tomcat other than yum utility. I downloaded he zip folder for tomcat which i downloaded from apace tomcat site.
View 2 Replies
View Related
Apr 12, 2010
[code]...
How do I fix this?
View 5 Replies
View Related
Jun 10, 2009
I am trying to install Fedora 11 from the full DVD iso on a system using an Intel D945GNT motherboard with a dual-core 3.2GHz Pentium D installed. The installation hangs quite quickly and produces the error "Kernel panic - not syncing"... The previous line is something along the lines of "EIP: [something] intel_i915_configure() [something else]". I have tried many different kernel boot options, such as acpi=off, nolapic, nommconf, and the like, but to no avail. It seems as though this has something to do with a memory mapping conflict due to the allocation of video memory for the on-board graphics chip, but I'm not at all certain about that.
View 3 Replies
View Related
Dec 16, 2010
I am trying to install FC14 on a Power 1800. I get hte message that installation stoped due to fatal error whn trying to install module.init.tool package.
This is a repetitive error. I burned a new CD, checked it but get the same error.
The exact message is: A fatal error occurred installing the module-init-tools package. This could indicate errors when reading the installation media. Installation cannot continue.
View 5 Replies
View Related
Mar 26, 2010
i study computational systems engineering.. and in my school (itlp) we've got fedora 12 installed in some of the computers.. and we use it to learn network administration and security. the reason of this message.. is that i want to install fedora 12 in my notebook (dv4-1525la vu068la).. but an error keeps poping up.. the error is the next one..
DMAR: No ATSR found
DRDH: handling fault status reg f0003d63
Kernel panic - not syncing: DMAR hardware is malfunctioning
and though i have looked in bugzilla.. there is no help for me there.. they say.. "press tab in the welcome bootscreen when you are about to select whether to install or restore an existing system and write intel_iommu=off and press enter" but that does not really helps.. it just does the same.. in some blogs they say "upgrade your bios".. but i say.. then why i can not install the olders distributions with my "old" bios.
View 1 Replies
View Related
Feb 17, 2009
I got a problem while updating KDE from 4.1.2 to 4.2. In our college we can't download more than 20MB officially. So I'm unable to get kdegames which is 32MB from Konsole so I downlaoded it using proxy and I copied it into the /var/cache/yum/updates/packages/ folder and now using this command (yum groupinstall 'KDE (K Desktop Environment)').
I tried to update to KDE 4.2 using Konsole but it is showing:
Error Downloading Packages:
6:kdegames-4.2.0-1.fc10.i386: failure: kdegames-4.2.0-1.fc10.i386.rpm from updates: [Errno 256] No more mirrors to try.
And even by double-clicking the KDEgames rpm file I'm unable to install it is saying GPG (I'm not sure GPG or not, start with G i think) Key missing so it is taking too much time and not doing anything.
View 14 Replies
View Related
Jun 13, 2009
I must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:
First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.
Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,
View 7 Replies
View Related
Jun 26, 2010
I got this error during updating backend data server for evolution. "could not do simulate: gnome-panel-2.30.0-1.fc13.i686 requires libedataserver-1.2.so.11 : Success - empty transaction"
View 2 Replies
View Related
May 25, 2011
i tries to upgrade my fc14 to fc15 using preupgrade. during installation packages process i get an error "fatal error bla-bla-bla installing netsniff-ng-...". i've booted in fc14 (in emergency mode) and manually removed old netsniff-ng package and installed new package. after that i've booted in preupgrade process. it finishes successfull. but now i can't boot in fc15 - i get "kernel panic" error. i've opened grub.conf and there is no 'initrd' section and there is no initramfs for fc15 in /boot folder. i've tried to boot fc15 with initrd /initramfs-bla-bla-fc14.i686.PAE.img. fc15 booted, but i think something wrong, because network not working, and there is only "lo" in ifconfig. what can i do?
View 14 Replies
View Related
Jul 2, 2010
I've just install qemu-kvm from [URL]
I run modprobe kvm and modprobe kvm-intel to load the modules, but the second command won't work.
It gives the following error -
Code:
root@mika:/home/mika# modprobe kvm-intel
FATAL: Error inserting kvm_intel (/lib/modules/2.6.33.4/kernel/arch/x86/kvm/kvm-intel.ko): Operation not supported
View 10 Replies
View Related
Jul 6, 2009
I have installed fedora, the installation very well took place, only I have a problem to reach the system in graphical mode, and when I tap " startx " in the console it shows the following error:
Fatal IO error 104 (connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining.
View 2 Replies
View Related
Mar 30, 2010
i got a dual-boot. both are debian. yesterday i upgraded one of them to debian-squeeze and to grub2.that installations boots just fine.but for the second i get the error message from the thread title:"render error detected"after the grub-menu.if i choose single user mode it boots and hangs waiting for the root file system.i found this results at google (which i am not allowed to post yet) but i don't understand them.
View 8 Replies
View Related
Mar 28, 2010
Quote:dpkg: unrecoverable fatal error, aborting: failed in buffer_read(fd): files list for package `sysvinit-utils': Input/output errorE: Sub-process /usr/bin/dpkg returned an error code (2)This is the error i get when i try to update my system, fresh install of ubuntu 9.10
View 2 Replies
View Related
Apr 24, 2010
I am having trouble installing the 10.04 RC On my desktop the installer just crashes with a fatal error, before you get to the first screen of the installation process, where you choose to run as live cd or install. On my Laptop i am trying to Install alongside my current 9.10 installation and i keep getting the errors illustrated in the screenies. It is all probably down to my stupidity, but if it is not then this is very worrying 1less than a week before release.
View 8 Replies
View Related
Oct 5, 2010
This box is running 10.04 server, it's been running perfectly for almost 6 weeks. It's only function in life is running MailArchiva which is an ediscovery package, runs very well. Anyhow, yesterday the boss tells me he wants to do something else so the last thing I did was an apt-get update and an apt-get upgrade, no errors were observed, I seem to remember like 8 updates were available, this is what I've normally done in the past to keep it current. The last thing I did after that was shutdown -r now.
This morning I can't get into the box, I reconnected a monitor to it and this is the error I'm getting when it stops after about 9 lines into the boot process;
modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.32-24-server/kernel/drivers/crypto/padlock-sha.ko): No such device.
This is a mystery to me, the system is not encrypted. The only stuff that is belongs to MailArchiva. Anyhow someone evidently made off with my install cd so I am downloading another to see if I can repair this but I have no idea what broke.
View 4 Replies
View Related
Dec 8, 2009
Last night software updater notification showed 29 updates. I was building a liveCD image so decided create the image first then install the updates. After the updates were finished, I did a reboot because some packages required it, I logged on successfully, then I shutdown for the night. This morning when I executed the same command used to create the liveCD image, I get the following error.
[Code]....
View 3 Replies
View Related
Jun 25, 2009
I updated the latest kernel and other new maintenance tonight and started getting this error at boot...doesn't appear to be hindering anything. My encrypted partitions (luks, ext4) still open and are accessible.
modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.29.5-191.fc11.i586/kernel/drivers/crypto/padlock-sha.ko): No such device
See similar errors reported on ubuntu forums... with various recommended workarounds... update/add an alias, blacklist a module, fresh install
View 13 Replies
View Related
Jun 24, 2011
I have been a regular user of Linux and have never faced a problem like this one, after I installed Linux Fedora 14 on my laptop. After installation, almost all the softwares that I was earlier using with the earlier version of Fedora are stopping immediately on starting and exitting with a fatal error. eg. when I try to run paraview, it immediately closes after giving some fatal error. Similar is the case with gambit, tecplot and mayaVi softwares.With my earlier version of Fedora, I was not facing any problem. But since I installed Fedora 14, I am facing this problem. I even tried by downloading and installing latest version of paraview and mayaVi from the net, but the latest versions also on starting give the same error : fatal error, and exit the program.
The softwares I mentioned immediately close indicationg a fatal error. The following error messages appear in the console after abrupt shut down of softwares with fatal error :
Output of /var/log/message file:
View 4 Replies
View Related
