Last night software updater notification showed 29 updates. I was building a liveCD image so decided create the image first then install the updates. After the updates were finished, I did a reboot because some packages required it, I logged on successfully, then I shutdown for the night. This morning when I executed the same command used to create the liveCD image, I get the following error.
[Code]....
I migrated to Debian sid, but since then I got this error everytime I launch Update Manager (whether it's in graphical mode or from a shell). Just after putting down my root password, I got this error:
Title of the window: (as superuser) A fatal error has been detected in update-manager. Do you want to submit a bug report? Selecting No will close the application. Whether I click Yes or No, nothing happens.
i update my ubuntu(10.10) to 11.04 when it update i got one error that say can not install python or upgrade . the installation finsh and i reboot my pc then ubuntu wont start i try to use
Code:
sudo dpkg --configure -a --force-all
my system repair but i still Have problem with python
the real issue is that when i install a package that require python the package wont install and say error:
Code:
Package python is not configured yet
I updated the latest kernel and other new maintenance tonight and started getting this error at boot...doesn't appear to be hindering anything. My encrypted partitions (luks, ext4) still open and are accessible.
modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.29.5-191.fc11.i586/kernel/drivers/crypto/padlock-sha.ko): No such device
See similar errors reported on ubuntu forums... with various recommended workarounds... update/add an alias, blacklist a module, fresh install
I have been a regular user of Linux and have never faced a problem like this one, after I installed Linux Fedora 14 on my laptop. After installation, almost all the softwares that I was earlier using with the earlier version of Fedora are stopping immediately on starting and exitting with a fatal error. eg. when I try to run paraview, it immediately closes after giving some fatal error. Similar is the case with gambit, tecplot and mayaVi softwares.With my earlier version of Fedora, I was not facing any problem. But since I installed Fedora 14, I am facing this problem. I even tried by downloading and installing latest version of paraview and mayaVi from the net, but the latest versions also on starting give the same error : fatal error, and exit the program.
The softwares I mentioned immediately close indicationg a fatal error. The following error messages appear in the console after abrupt shut down of softwares with fatal error :
Output of /var/log/message file:
for some reason my first updating was interrupted and from then i cannot update. i get the following message:
rpmdb: PANIC: fatal region error detected; run recovery
error: db3 error(-30974) from dbenv->open: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
[root@laptop etc]# yum repolist
[Code]....
I haven't been able to update my system as of late, because yum keeps giving me the same error, everytime I try to run updates/install packages.
Code:
Running Transaction
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in <module>
yummain.user_main(sys.argv[1:], exit_code=True)
[Code]....
Running it with -v did not provide any other information regarding this problem. I tried running yum -clean all as well as package-cleanup --dupes and other various forms and rpm -Va --nodeps --nofiledigest but didn't get any output.
I installed fedora 10 on my laptop. But I am getting this error when it is booting up:
Code:
Release Date : 5 November 2008
X Protocol Version 11 , Revision 0
[code]....
Trying to Interface USB Wifi Dongle with Linux (Fedoracore 8 While giving modprobe zd1211rw following FATAL Error throws;
[root@localhost linux-2.6.22.18]# /sbin/modprobe zd1211rw //////////////modprobe command
WARNING: Error inserting ieee80211_crypt (/lib/modules/2.6.23.1-42.fc8/
kernel/net/ieee80211/ieee80211_crypt.ko): Invalid module format
WARNING: Error inserting ieee80211 (/lib/modules/2.6.23.1-42.fc8/
kernel/net/ieee80211/ieee80211.ko): Invalid module format
[Code]...
Trying to Interface USB Wifi Dongle with Linux (Fedoracore 8)
While giving modprobe zd1211rw following FATAL Error throws;
How to overcome this FATAL Error? What prerequisites need to check?
I am getting an error from yum update and Kpackagekit:
[root@asus-m4n82 tylerm]# yum update
Loaded plugins: refresh-packagekit
Setting up Update Process
rpmdb: page 18816: illegal page type or format
[code]....
How do I "run recovery"? Edit: Ok so it looks like I had som bad ram in my system that caused this - I found a site that told me to do this:
rm -f /var/lib/rpm/__db*
rpm rebuilddb
yum clean all
I did this but now when I try something like yum install firefox it pulls in a ton of already installed packages.
I'm tring to run AMDOverdriveCtrl, since they don't have an RPM file for Fedora i tried to compile from source i followed the instruction in the readme files run the make command
Code:
% make
g++ -mwindows -s -pthread -lwx_gtk2u_richtext-2.8 -lwx_gtk2u_aui-2.8 -lwx_gtk2u_xrc-2.8 -lwx_gtk2u_qa-2.8 -lwx_gtk2u_html-2.8 -lwx_gtk2u_adv-2.8 -lwx_gtk2u_core-2.8 -lwx_baseu_xml-2.8 -lwx_baseu_net-2.8 -lwx_baseu-2.8 -ldl -o./Release/AMDOverdriveCtrl ./src/CFanSpeedPanel.o ./src/COvdrSettingsPanel.o ./src/CFanControlPanel.o ./src/CColorTempPanel.o ./src/BezierMath.o ./src/Color.o
[code]....
and tried to run the application, and i get this error message
Code:
$ AMDOverdriveCtrl
Fatal Error: Mismatch between the program and library build versions detected.
The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.4,compatible with 2.6), and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.6).
i tries to upgrade my fc14 to fc15 using preupgrade. during installation packages process i get an error "fatal error bla-bla-bla installing netsniff-ng-...". i've booted in fc14 (in emergency mode) and manually removed old netsniff-ng package and installed new package. after that i've booted in preupgrade process. it finishes successfull. but now i can't boot in fc15 - i get "kernel panic" error. i've opened grub.conf and there is no 'initrd' section and there is no initramfs for fc15 in /boot folder. i've tried to boot fc15 with initrd /initramfs-bla-bla-fc14.i686.PAE.img. fc15 booted, but i think something wrong, because network not working, and there is only "lo" in ifconfig. what can i do?
View 14 Replies View RelatedI had an earlier thread with wrong title and wasn't sure of the problem at the time. Now I have some details after checking all the threads about catalyst so posting a new thread. The problem: In korganizer (or To-Do list in kontact), whenever double-clicking or right-click->Edit.. a To-Do item in the summary list window, it crashes Xorg.
[Code]...
Fatal server error: Caught signal 11 (Segmentation fault). Server aborting I think it has something to do with the amd/ati catalyst driver and korganizer. My video card is XFX Radeon HD5670. I have Fedora 14 x86_64 latest update with xorg 1.9.1-3. I tried catalyst 10.9, 10.10, 10.11, and kernel 2.6.35.6-45.fc14.x86_64, 2.6.35.6-48.fc14.x86_64, 2.6.35.9-64.fc14.x86_64. Same problem.
If I use vesa driver, or from another PC with proprietary nvidia driver, no problem. Open source radeon driver works ok but sometimes the display turns off and I can't get back the display. And I need 3D. I scoured through the forum and followed the instructions exactly:
[code]...
I get this missing dependency: Error: Missing Dependency: python(abi) = 2.3 I've tried to find this, but can find only references to it in past versions of Fedora (<9). I'm running F11.
View 1 Replies View RelatedI'm encountering a python error in the beginning of the upgrade. See screenshot. How can this be solved or should I indeed file a bug report? Problem is that except for taking the picture, I've been unable to save the info.
View 3 Replies View RelatedI must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:
First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.
Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,
I've just install qemu-kvm from [URL]
I run modprobe kvm and modprobe kvm-intel to load the modules, but the second command won't work.
It gives the following error -
Code:
root@mika:/home/mika# modprobe kvm-intel
FATAL: Error inserting kvm_intel (/lib/modules/2.6.33.4/kernel/arch/x86/kvm/kvm-intel.ko): Operation not supported
I have installed fedora, the installation very well took place, only I have a problem to reach the system in graphical mode, and when I tap " startx " in the console it shows the following error:
Fatal IO error 104 (connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining.
I'm runing FC11 and have compiled the vanilla kernel 2.6.33.4 to support Dazuko. It has broken my NFSD server in the process, and I can't figure out why. I get these errors on boot. FATAL: Module nfsd not found. FATAL: Error running install command for nfsd
[code]....
I have VIA/S3G unichrome IGP video card of 32MB after installing fedora i am getting very worst resolution of 600x400which is completely irritating so please provide me a way out from this problem to use fedorathe solutions i followed and failed are given below
1. Some one told me to change the xorg.conf file but i failed because there is no such file in the given location
2. Some one told me to create it using system-config-display but for fedora 14 there is no package for that
3. some one told me again of using the command Xorg -configure but it said as followed [root@localhost tmp]# Xorg -configure
Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again.
[code]....
one of the coolest features of Fedora imho is sandbox -X, which I used extensively in F12. However, in F13 I yum install /usr/sbin/seunshare prints:
Code:
[...]--> Processing Dependency: policycoreutils-python = 2.0.82-13.fc13 for package: policycoreutils-sandbox-2.0.82-13.fc13.x86_64
--> Finished Dependency Resolution
Error: Package: policycoreutils-sandbox-2.0.82-13.fc13.x86_64 (fedora)
Requires: policycoreutils-python = 2.0.82-13.fc13
[Code]....
i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies View RelatedAfter update to 5.3 and reboot I got this error. googling for it I found that it is a known bug in kernel REHL 5.3 and there is also a patch for it [URL]. I am very new to linux, so how to apply, or just wait for a new kernel?
View 4 Replies View RelatedI am trying to install FC14 on a Power 1800. I get hte message that installation stoped due to fatal error whn trying to install module.init.tool package.
This is a repetitive error. I burned a new CD, checked it but get the same error.
The exact message is: A fatal error occurred installing the module-init-tools package. This could indicate errors when reading the installation media. Installation cannot continue.
I've updated my openSUSE 11.1 to 11.2 using installation DVD. After that, as system boots, I started to get lines like:
Code: FATAL: Module jbd not found
FATAL: Module mbcache not found
FATAL: Module ext3 not found and so on with different modules.. and this exact string several times:
Code: WARNING: All config file need .conf: /etc/modprobe.d/tv, it will be ignored in a future release. Finally I get:
[Code]....
For the past few days, the automatic GUI update has been crashing, complaining of a "Transaction error."
Here is the output that pops up in a separate window:
Code:
I tried the following:
Code:
And got the following (similar) output:
Code:
I very rarely use xfce and I don't quite know what exo is, but I'd like to fix this problem if it's not too involved.
Code:could not add package update for poppler-data-0.4.0-1.fc12(noarch)updates: poppler-data-0.4.0-1.fc12.noarch.
View 3 Replies View RelatedTried updating today from Ubuntu 10.04 to 10.10. Seemed to go ok, but on reboot I got the message
Error Modprobe FATAL Could not load /lib/modules/ 2.6.35-21-generic/modules.dep no such file or module
Ive been messing around on a Solaris box, installing precompiled lib/programs from the repos by extracting them and placing them in my home dir. It seems everything ive tried sofar works, except for irssi. I get the following error:
$ ~/bin/irssi
ld.so.1: irssi: fatal: relocation error: file /export/home0/leem2/bin/irssi: symbol boot_DynaLoader: referenced symbol not found
Killed
I have run:
$ ldd /export/home0/leem2/bin/irssi
and it has no missing libs