A recently installed 10:10 displays this message at start up:
FATAL: Cannot load generic modules /lib/modules/2.6.35-25-generic/modules.deb
(As best I can remember.It disappears so fast).
As I am having trouble getting a fingerprint reader to work, I thought I ought get it fixed.e.
when I try to open Banshee I get an error message telling me that the disk is malformed and then Banshee closes itself (faster than I can copy and paste the exact error). I did some searching and apparently it's caused by the configuration file, but I did a complete removal of Banshee from the package manager, restarted the computer, and re-installed Banshee, but it's still giving me the error.
View 1 Replies View RelatedWhen I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
When I try to start the program Gparted in Ubuntu, the window opens up, and it looks like it is initializing, but then it just disappears, without an error message or anything to go by.
View 4 Replies View RelatedI am trying to get vsftpd started on my server. I followed the steps outlined here: [url] but for some reason, the daemon is not starting or throwing an error message.
After making all of the changes to vsftpd.conf, if I execute the following commands, here is the result:
my iwlist scan is normal. ethernet connection ok, wirless not working but does seem to receive. wifi radar lists my router ssid. Does this say I have the correct router for my wireless is my question? I am also getting this error message with this system on KDE, LENNY. From KWLAN a wpasupplicant front end.
"you do not have permissions to start pppd or pppd was not found. Dial up networking will not work."
[code]...
Update-notifier told me there were updates today and I installed them. Among them were some for chromium (the browser, not the game ). After the update I couldn't start the browser. I tried starting from terminal and got: "Inconsistency detected by ld.so: dl-minimal.c: 138: realloc: Assertion `ptr == alloc_last_block' failed!" "I haz a fail!", I thought to myself and then tried rebooting and then reinstalling. Neither worked. This is on a 64-bit machine. Everything else works as expected. Using Firefox now, but I want my chromium-browser as well.
View 9 Replies View RelatedI used init 0 to make server shutdown,and replaced the power cord when I boot the server,it can't enter the GUI then I used init 5 and get the following message
Could not start the X server (your graphical environment)due to some internal error. contact your system administrator or check your syslog to diagnose. In the meantime this display will be disabled. Please restart GDM when the problem is corrected.
I foolishly changed the mount point of a partition on a HDD which Linux was not in fact using, and now when I try to start up I get a message box stating:- Could not start kstartupconfig. Check your installation.
How do I recover the situation. I do not have an up to date recovery disc. I do have a full bootup disc of Suse 11.2 - could I use the opportunity to update without losing all my personal files, or should I use the old 10.2 disks? The first essential is to get something back up and working.
I have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
View 1 Replies View RelatedI've just install qemu-kvm from [URL]
I run modprobe kvm and modprobe kvm-intel to load the modules, but the second command won't work.
It gives the following error -
Code:
root@mika:/home/mika# modprobe kvm-intel
FATAL: Error inserting kvm_intel (/lib/modules/2.6.33.4/kernel/arch/x86/kvm/kvm-intel.ko): Operation not supported
i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies View RelatedUsing IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies View RelatedIm trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedI have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
I'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
Tried updating today from Ubuntu 10.04 to 10.10. Seemed to go ok, but on reboot I got the message
Error Modprobe FATAL Could not load /lib/modules/ 2.6.35-21-generic/modules.dep no such file or module
Xorg seems to crash randomly and with no real reason. Once it does, I can't restart it. If I try to restart it with GDM, nothing will happen. However once it crashes, Ubuntu's low graphics mode window pops up. Telling it to reconfigure the xorg config seems to do nothing for my problem. I will still crash after words.
Right now I'm running in an earlier kernel, hoping this will keep it from crasgubg
Here is my xorg log. code...
I am trying to apply updates, but receiving the following error:
[Code]....
I have a virtual machine (VirtualBox) with Ubuntu 9.10 installed, I'm trying to install MySql community editor using the linux-generic package (the tar package), I followed all the procedure but I had a problem with the next line of code:
shell> scripts/mysql_install_db --user=mysql
I don't understand a lot about the command line, but I think this line of code is used to create the basic tables of the database (users and so on). the problem I got with this line of code is:
FATAL ERROR: Could not find mysqld
I googled it and after a while I found this blog:
azimbabu.blogspot.com/2009/07/mysql-5136-in-ubuntu-904-fatal-error.html
The blog says that the problem is a default instalation of SQL, and the solution is replace the file my.cnf in the location /etc/mysql for other file that comes with the package.
I didn't replace the file my.cnf, I only changed the name and it woked perfectly, and this is the problem, I don't understand why it worked.
Any one knows why this file is so important?What could happen if I delete this file?what is the purpose of the package mysql-common un Ubuntu?
for some reason my first updating was interrupted and from then i cannot update. i get the following message:
rpmdb: PANIC: fatal region error detected; run recovery
error: db3 error(-30974) from dbenv->open: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
[root@laptop etc]# yum repolist
[Code]....
Quote:dpkg: unrecoverable fatal error, aborting: failed in buffer_read(fd): files list for package `sysvinit-utils': Input/output errorE: Sub-process /usr/bin/dpkg returned an error code (2)This is the error i get when i try to update my system, fresh install of ubuntu 9.10
View 2 Replies View RelatedI am having trouble installing the 10.04 RC On my desktop the installer just crashes with a fatal error, before you get to the first screen of the installation process, where you choose to run as live cd or install. On my Laptop i am trying to Install alongside my current 9.10 installation and i keep getting the errors illustrated in the screenies. It is all probably down to my stupidity, but if it is not then this is very worrying 1less than a week before release.
View 8 Replies View RelatedThis box is running 10.04 server, it's been running perfectly for almost 6 weeks. It's only function in life is running MailArchiva which is an ediscovery package, runs very well. Anyhow, yesterday the boss tells me he wants to do something else so the last thing I did was an apt-get update and an apt-get upgrade, no errors were observed, I seem to remember like 8 updates were available, this is what I've normally done in the past to keep it current. The last thing I did after that was shutdown -r now.
This morning I can't get into the box, I reconnected a monitor to it and this is the error I'm getting when it stops after about 9 lines into the boot process;
modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.32-24-server/kernel/drivers/crypto/padlock-sha.ko): No such device.
This is a mystery to me, the system is not encrypted. The only stuff that is belongs to MailArchiva. Anyhow someone evidently made off with my install cd so I am downloading another to see if I can repair this but I have no idea what broke.
I upgraded Ubuntu from version 10.04 to 10.10. When the upgrade completed I was asked to reboot. After reboot I simply got the message "error: file not found" on the screen. After a few seconds the machine rebooted.
I guess it is the boot loader that was not found. Is there some hope of fixing this problem?
I just installed Maverick on a brand new system last Saturday. Everything worked, except dual monitors, so I activated the proprietary ATI/AMD driver. That allowed the dual monitors to work, except that it put a little "AMD unsupported hardware" watermark in the lower right-hand side of each screen. After a day or two, I decided to go back to the default driver while trying to figure out how to avoid the watermark.
I assumed that when I deactivated/removed the proprietary driver that it would automatically switch back to the default. Instead, my computer now boots to TTY1, and when I try to install xserver.xorg, etc., I get a lot of error messages,ike "No screens found" or "Screens found, but configuration is unusable," etc. The same messages show up in the logs.Can anyone help me get back to a useable desktop display? At this point, I don't care which one. erhaps the proprietary would be easiest since it seems to be holding my system hostage, but either one would work.
Ubuntu 10.10 Whenever I try to boot up now I get a command line environment instead of the normal gnome desktop. The first error message that comes up is: "Screens found,but none have a usable configuration" further down: "Fatal server error: no screens found" Any way I can re-configure so it detects my monitor?
View 9 Replies View RelatedI'm using with success NX server and client on Ubuntu 11.04 on both side. Yesterday the server crashed and now the client can't connect to it. The client works well because if I try to connect to an other server it works well and if I try to connect to this server with an other user it works well. So I think that there is a problem with my user. I have tried to solve the problem as explained in the details of the error. Unfortunately there is no file /var/log/messages so I can't search the code of the exception.
Code:
NX> 203 NXSSH running with pid: 3877
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 10.1.0.60 on port: 22
NX> 202 Authenticating user: nx
[Code]...
I've installed 9.10 on a work station with success. I've got an nvidia quadro fx 3000 and its supported under nvidia legacy driver apparently. So I've tried to install the driver with no success. Xorg.0.log reports a fatal server error no screens found. I get a flashing console login when I boot with "nvidia" device driver in xorg.conf, it boots fine with "nv". No matter what I try I cant get it to boot with nvidia drivers. Also, on a side note, after initially installing nvidia driver thru hardware in gnome, I no longer have a grub loader option to select recovery or anything else. Upon boot it displays "grub" briefly then continues to boot to gui. I've set the delay to 20 seconds with no results.
Resolved the issue of the display, now on to the grub menu.