Installed 13.1 as a guest in VirtualBox with Debian Lenny 5 64bit as host. The mouse, gpm, and the keyboard work alright at the black screen but in the graphical thing, forget its name.....Xsomething, not KDE, there is no mouse or keyboard; for example the screensaver just goes on and on and nothing will stop it.
View 14 RepliesI've been using Slackware for ages... since like 1997 or 1998. I have a Slackware 3.x CD around here somewhere. I'm usually the one explaining how Linux works to everyone else. I even got GnuCash working on Slackware. So these two problems ...
1. Keyboard in Xorg. It seems to work, except the down arrow and the page down buttons are mapped as something else (the down arrow causes TEXT TO DISAPPEAR...I've had to type this like three times now...). After a bunch of searches, it looks like a problem with HAL and evdev (whatever that is). I tried setting the model in KDE's Regional control panel but that had no effect.
Xorg.conf settings for this section... you can see some remnants from prior attempts:
I did check that event1 refers to the keyboard. The keyboard is a Microsoft Internet Keyboard that works fine; the arrow keys work great outside of X.
2. Mouse in Xorg. The scroll wheel wants to scroll side to side instead of up and down. This also happens to be a Microsoft product (I like their mice... my wife brought the Microsoft keyboard into the relationship...). It's just a wheel optical 3-button mouse, nothing special. Again, none of my usual xorg.conf edits seem to work; here's what I have right now.
Again, I checked that the mouse is event2.
Someone really should make an upgrade guide for people like me that have been using it for years and aren't really following the tech that explains new features like hal and evdev (I know hal has been around for a couple versions, but I've never gotten involved with it until now). Or maybe there is one and I'm just not aware of it. Basically I just want it to just work, which is why I use Slackware in the first place!
I should mention I did have both working under Slackware 13.1 on this machine until Windows conveniently erased my root partition for me, so I got to do a completely clean Slackware install for the first time in a LONG time. That's when the issue arose. Because I was in a rush, I did a full install. I assume the previous setup was using non-hal/non-evdev methods, but I might as well set this one up using the new methods, right?
I'm using Slackware64 13.1, running on a Core 2 Quad Q8300 @ 2.50 GHz. Hardware is fine - both mouse and keyboard work under Windows XP, and like I said the keyboard is fine outside X. It has to be some configuration problem ...somewhere.
Symptoms
- PS/2 mouse works fine under gpm
- PS/2 Keyboard works in console terminal
- Neither Mouse nor Keyboard works under kdm or xdm
- And: #ps aux | grep hal
shows:
82 4259 0.0 0.3 6472 1240 ? Ss Mar10 0:02
/usr/sbin/hald --daemon=yes --use-syslog
but does not show anything like:
root 4298 0.0 0.1 3300 544 ? S Mar10 0:00
hald-addon-input: Listening on /dev/input/event1
- And syslog show: when starting hald with --verbose=yes --use-syslog
Mar 10 20:30:48 darkstar hald[519]: 20:30:48.792 [E] hald.c:124: Cannot
start addon hald-addon-keyboard for udi
/org/freedesktop/Hal/devices/platform_i8042_i8042
_KBD_port_logicaldev_input
Mar 10 20:49:41 darkstar hald[2454]: 20:49:41.651 [E] hald_runner.c:671
: Error running 'hald-addon-keyboard':
org.freedesktop.HalRunner.Failed: Start request failed
- You will find that deleting:
/var/cache/hald/fdi-cache
(and of course: /etc/rc.d/rc.hald restart)
- will allow hald to start the correct module:
/usr/libexec/hald-addon-input
- instead of trying to start a non-existant file:
/usr/libexec/hald-addon-keyboard
My theory is that since hald is the same version in 12.2 and 13.0, had believed that the cache file held valid information, when in fact it did not. I did not think to check the modification date before deleting the file.
I have problem with my Slackware 13.1. When I run system under log in is "user" after 5 minutes system is hung! I can't move mouse and use keyboard! I didn't have this problem when I run system under log in is root. How I can decide this problem ?
View 6 Replies View RelatedFor example I'm setting key F1 & F2 keys mouse 1 and mouse 2 click in keyboard..
View 4 Replies View RelatedWell, just as the title of this post says, I am having keyboard and mouse problems. Here's the storyMy friend Cody wanted me to take a look at his computer for him (I'm sort of known as a Linux nerd in my school lol) because his keyboard and mouse do not at all work in init 4 mode. I've tried reconfiguring the keyboard and mouse by trying a different module. I've even tried reconfiguring X alltogether by running "X -configure", which didn't work
View 3 Replies View RelatedI just recently installed Slackware onto a virtual machine(I'm planning on buying a new disc drive and 1 TB HDD with-in the next couple of months and plan on Slackware being my primary OS[right now Mac OS X 10.6 is]), and everything went great.
I then went onto edit the /etc/inittab file in emacs and changed the run-level to 4. I don't know why it's decided that I'd want to boot into KDE when XFCE is installed and in the configuration I selected XFCE but it's not really relevant(I have a WM guide thing open in another tab and will probably be able to change it).
The problem is, as the vague title may suggest, is that it basically freezes when I'm at the log-in screen. The input field for the username is highlighted and blinking, and the cursor it self is visible in the centre of the screen, but it simply doesn't pick up on any input from my keyboard or mouse.
I tried booting up the install CD and logging in as root, mounting sda4(which is the root partition) and editing said file but sudo isn't installed(to my knowledge) on the install disc and when I do the command,
Code:
I've installed SalixOS LXDE and thought it was the best thing but... After I disabled almost all services except syslog, dbus, and hald while inside lxde desktop. I rebooted and my mouse and keyboard no longer worked. So then I booted my Slackware install and edited /etc/inittab on the salix partition so I could boot into init 3 (I kinda like init 3 more than 4 anyway). Booted back into salix and keyboard seems to work but gpm doesn't... Gpm can't find any mouse so I do an lsmod and there's only about 4 modules loaded? Crap... So I dig around /etc/rc.d folder and I think it's got to do with me disabling the udev services when everything was fine after a fresh install...
I ran the init script for udev but it does nothing... I also ran pkgtool and went to setup, selected services and hit enter but it jumps back to the main menu?! I don't know if that's a glitch or what but it won't even let me pick the services with pkgtool... So what can I do to change everything back to their default value? I only booted once into my new salix install, changed services, rebooted, and then problems... I really loved the way everything was working on my first boot. Salix is one of those distro's that really gave me a happy feeling with linux so I'd really hate to stop using it over this one wrong thing I did...
I have a headless mythtv running 13, when there's no monitor connected X doesn't start. If I plug a monitor in it still doesn't do my any good as there's no kb/mouse either. I know the system has booted fine as I can connect to myth remotely. This a slackware or x problem? Want to run x11vnc here but without x I can't do that.
View 5 Replies View RelatedI'm installing slack 13.0 in a Dell 2350 for a friend. once installed, it works ok for a while then within some somewhat random period of time, just plain locks up. the keyboard stops working, the mouse cursor still moves, but there is no response from mouse clicks. i was ssh'ed into the machine one of these times to see if i could read the logs during a lockup. the machine stopped responding to the ssh session as well (actually i had an instance of mc running at the time, and the machine still responded to it. when i exited mc, i was stuck in console never-never land). the logs show absolutely nothing. /etc/messages keeps showing MARK long after the lockup. all other logs are not updated since boot. this machine has an i810 chipset, is there a driver issue here?
View 6 Replies View RelatedIv'e got an issue with mouse speed, on boot the mouse is to fast, so I found that the command
Quote:
slows it down the way I need. But now, each boot I need to run it again. Is there a place where I can put it so it runs every time X starts? Also, googling a bit I found that udev rules can be used instead, but I don't know how to write it as a rule.
I'm trying to install slackware 32 bit 13.1.After loading kernel it asks for keyboard configuration, but keyboard (usb wireless) doesn't work.
Keyboard works on the old 13.0 installation, on bios and also in the boot options of 13.1 installation cd.
I've tried removing legacy usb support and changing usb2.0 speed from high to full. Nothing changed.
Anybody with this strange problem? (kernel of setup seems also to detect it correctly as a trust keyboard).
Installed OpenSUSE in VirtualBox to try out. Boots ok but can't capture mouse! I installed with all defaults and using Gnome. Host OS is Ubuntu. I'm running XP fine in VirtualBox and wanted to test drive OpenSUSE.
View 9 Replies View RelatedI installed Slackware 13 in VirtualBox 3.1 (seehere)When I'm logged in as a normal user, I get a mesage that Intel *** (sound device) doesn't work anymore and I hear no sound.But it works very fine when I'm logged in as root.
View 4 Replies View RelatedI'm trying to run LKL (Linux Keyboard Logger) in a Ubuntu 9.04 VirtualBox VM (VirtualBox 2.2.2 running on a XP host). The package installs fine, but when I try to run it lkl -l -k /usr/share/lkl/keymaps/us_km -o ./kbd.log & it hogs the CPU usage to 50% and never logs a keystroke (in fact the kbd.log file is never created)
View 1 Replies View RelatedWhen I load XP in VirtualBox it starts off with the keyboard working. However, if I leave my computer for 10mins the Ubuntu computer/screensaver lock comes in. When I then go back to my VirtualBox I cannot select the CTRL-right to activate the keyboard. The mouse still works correctly but I cannot type anything.
View 3 Replies View RelatedLost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies View RelatedI recently logged into my Slackware 13.1 account and when I issued the "startx" command , there was no toolbar at the bottom and I couldn't see my mouse. I was able to click on a short-cut on my desktop , and my mouse came back. I can't open any thing except VirtualBox. When I open it , the top is cut off , so the minimize , maximize and close buttons are cut-off . I really have no idea what to do.P.S. I have XFCE instead of KDE
View 5 Replies View RelatedI've got a problem with input devices not being available under X.
I've installed F13 with 'minimal' type, i.e. no desktop environment.
After a lot of struggle, I managed to install quite a few packages (after configuring network!) and the Nvidia (proprietary) driver, disabling the nouveau driver.
I got to mention that nvidia installer offered me to create a xorg.conf on its own with its drivers configured for X. But the thing is if I type X or Xorg the screen turns black meaning that X is running but I don't see anything. Looking at /var/log/Xorg.0.log, I see this message:
AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
Then, later on, i installed gnome thinking it'll take care of these input devices but the same happens in the gnome login screen too. Both Keyboard and mouse are not working.
I've tried adding the Option "AllowEmptyInput" "off" or Option "AllowEmptyInput" "false" in my xorg.conf under both the input devices section and also the server layout section, but all in vain.
I'm sure I'm missing some setting or something. I've also looked at a few bugs logged in the RedHat bug DB but their resolution of setting the AllowEmptyInput to false doesn't work in my case.
For some reason I am unable to use either my keyboard or my mouse. No problem in etch up until now, even after rebooting.
View 1 Replies View RelatedI can't seem to use my mouse and keyboard at the same time.I am running Ubuntu 11.04 64-bit
View 3 Replies View RelatedI have downloaded the latest Ubuntu.iso and extracted it to /tmp/ubuntu/ on my laptop. In the folder isolinux there is an isolinux.cfg file. I am trying to prepare a USB stick by modifying those files, so that when I boot from USB it opens VNC and puts a static IP of 192.168.1.125. How can I enable VNC and a static IP so that from my laptop I can do the installation of Ubuntu 11.04 without using a keyboard or mouse?[URL]..
View 1 Replies View RelatedI know that by pressing CTRL+SHIFT+NUMLOCK I can use the number pad as a pseudo mouse, but is it possible to force this condition at boot without needing to enter a key press?
(I'm putting a computer in my car running Ubuntu and have decided to do away with both the mouse and keyboard and control it from a joystick on the steering column. This has been wired to the circuit out of an old keyboard to mimic the arrow keys on the numeric keypad.)
I m using wireless keyboard and mouse with my PC. I have installed Win XP and Ubuntu both but I login in one at a time. In windows lower panel shows if my caps lock and numeric lock are on. but this is not so in case in Ubuntu. how to display same in Ubuntu panel.
View 2 Replies View RelatedI just upgraded from 9.10 to 10.04 using the distro upgrade feature. Everything was upgraded without errors.
However, my mouse/keyboard now freezes after 10+ minutes of use. Both are unresponsive, and the keyboard lights does not change with the use of caps-lock, etc.
The system didn't crash though. I had a download running which was completed despite the mouse/keyboard hang.
The computer is barely usable now, I really wished I didn't upgrade...
I'm having some weird problems with my mouse and keyboard. I'll be moving the mouse and keyboard about and all of a sudden the keyboard won't respond and the mouse moves and is fully working, but it seems to be a problem with the desktop, more then the mouse, because it'll highlight stuff and certain stuff will open when I click them, but when I go down to the toolbar, and try to click applications, places, and system, it'll highlight it but not respond when I click it. This happens about every 45 Minutes, to 1 hour of time with ubuntu running [10.04] [Additional details]
- I'm using an HP Pavilion Dv6000 Laptop, 64 Bit Ubuntu 10.04
- My drivers are all up to date
- Could it be because my Laptop gets really hot? But it dosen't happen ever when I'm running Windows, so I'm not so sure about that.
what I can do to configure one of the keys in my keyboard to act as the left click? having mouse issues at the moment.
View 5 Replies View RelatedSo my computer was slow with Karmic Koala, so I tried upgrading my build to Lucid Lynx 10.04.
Now I can't login because neither my keyboard nor mouse (and touch-pad) work. However, I can access the command mode (terminal?) though through the grub boot menu.
how I can get my mouse (and touch-pad) and keyboard to work with Ubuntu 10.04? My machine is an Acer Aspire 4730Z. I dual boot with Windows 7, and I'd prefer not to have to clear out the partition for Linux and reinstall.
I messed up my xorg.conf and tried to put in a clean one, but it doesn't seem to work. I'm not sure what went wrong. When X loads, the mouse cursor is not responding and my keyboard is dead too. I can't toggle to text mode either (Alt-Ctrl-F1).Hope the following files might explain what's wrong./var/log/Xorg.0.log
Code:
[ 26.835] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 26.840] (II) No input driver/identifier specified (ignoring)
[code]....
I've had these problems ever since upgrading to 10.10Boot up goes nowhere unless I touch the trackpad or keyboard. My clock says it's 10:00am but it's three in the afternoon, so I'm always having to resync with NTP. Music and video stutters with playback unless I touch the trackpad.I'm on a Toshiba NB205 netbook.These are pretty big problems. And I'm sure I'm not the only one using 10.10. Is there no fix out for this yet?
View 2 Replies View Related