Slackware :: On KDE Log-in Screen Mouse Pointer And Keyboard Input Not Acknowledged
Oct 10, 2010
I just recently installed Slackware onto a virtual machine(I'm planning on buying a new disc drive and 1 TB HDD with-in the next couple of months and plan on Slackware being my primary OS[right now Mac OS X 10.6 is]), and everything went great.
I then went onto edit the /etc/inittab file in emacs and changed the run-level to 4. I don't know why it's decided that I'd want to boot into KDE when XFCE is installed and in the configuration I selected XFCE but it's not really relevant(I have a WM guide thing open in another tab and will probably be able to change it).
The problem is, as the vague title may suggest, is that it basically freezes when I'm at the log-in screen. The input field for the username is highlighted and blinking, and the cursor it self is visible in the centre of the screen, but it simply doesn't pick up on any input from my keyboard or mouse.
I tried booting up the install CD and logging in as root, mounting sda4(which is the root partition) and editing said file but sudo isn't installed(to my knowledge) on the install disc and when I do the command,
Code:
View 8 Replies
ADVERTISEMENT
Dec 19, 2010
I installed Ubuntu a couple of months ago using the Wubi installer.Today, I went to restart my PC, but soon after hitting 'Restart' the computer became unresponsive. I couldn't get any keyboard/mouse input to register on screen, so I did a force shut down by holding down the power button. When I turned the computer back on, I selected Ubuntu from the boot menu. The computer printed some messages that passed by relatively quickly so I'm not sure exactly what they said, but it was something along the lines of "NTFS3: wubibuilder failed to load", and then it went straight back to the boot menu. Tried again and again with no success, so I loaded my Windows 7 install to investigate from there. I found a link to Explore2fs on these forums, so I loaded it up, but it apparently can't locate my Ubuntu partition, or at least I don't see my files. I ran the Wubi installer again to see what it would say, and it tells me that a previous installation was detected, and gives me the option to uninstall. Does anyone have an idea of what went wrong,
View 5 Replies
View Related
Nov 23, 2010
Is it possible to steer mouse pointer by keyboard.
View 2 Replies
View Related
Jul 29, 2010
As you know it is possible to move the mouse pointer with the numlock keys on a standard keyboard. I would like to know what are the commands for moving the pointer up, down, right, and left? I plan to reprogram different keys/shortcuts to do those mouse functions instead of the numlock keys.
View 1 Replies
View Related
Feb 16, 2010
after successfully installing Slackware 13, I immediately installed other packages mainly to solve display/freezing issues(see below), I noticed that every time I try to change the display resolution - both from the 'system -> system settings' and from the "plasmoid" -
my mouse cursor would disappear.
now I know it's on the pointer, and not the mouse - I can move the mouse and see "mouse-over" activity, and based on seeing this, even clicking(both left and right) still has effect. In fact, if I were patient enough, I could navigate through my desktop.
note:
I have a Intel 82865g integrated graphics controller, had issues after installing, so I upgraded to the 2.6.32.3 kernel and installed:
fx86-video-intel-2.9.0
libdrm ? 17 ?
View 2 Replies
View Related
Jul 15, 2010
I'm running 12, not 11. I don't know why I had 11 in my head. Can this be moved BACK from EOL? If not, I'll start a new thread. Sorry. My wife and I have matching HP EliteBook 8730w "mobile workstations" (laptops that need a donkey to move them). We also have matching LG second screens. Unfortunately, we have matching mouse pointer issues too, as you might expect.
99% of the time we work away without issue. 1% of the time, Fedora suddenly stops showing the mouse pointer in the separate LG screen. The pointer is there, you can use it (if you can guess where the hell it is!) but you can't see it. Only a reboot seems to solve the problem.
It's worth noting xorg.conf is not being used. It's an nVidia card in these laptops and I tried the latest drivers from them - they totally wiped out the display, I mean total FAIL, unusable. Had to boot up in without GNOME, run level 3, to fix it. After much messing around, I think I used the FirstAidKit plugin for xserver to repair things. Since then there is no xorg.conf:
[Code]....
If I restore *any* xorg.conf file it all goes wrong again, so I'm guessing there are either some defaults at play or there's another system currently managing my display. Either way, restoring/editing xorg.conf won't help me with the current set-up.
View 8 Replies
View Related
May 29, 2011
I am using Ubuntu 10.10 on my Dell Inspiron 1525. I haven't have been having consistent internet connection, hence haven't updated for much of the time. Yesterday I tried to update the Firefox browser from 3.6 to 4 and ran
Code:
sudo apt-get install firefox
It told a amount of around 57 packages would be updated in the process. After the installation I shutdown and went to sleep.The system now boots to purple screen ubuntu dot loading and then to black screen with the mouse pointer in the centre. Then nothing happens. I searched in the forums and tried to go to recovery mode and ran dkpg, then failsafeX, but failsafeX cannot detect my input devices, Hence I can't do anything.
View 1 Replies
View Related
Jan 11, 2011
I've found that my USB mouse causes some I/O bug BIOS, but in operation system it works fine. Problem is freezing GRUB caused by fake input from the mouse. Possible decision is disabling any input for grub, but I don't know how to do it.
View 6 Replies
View Related
Dec 9, 2009
I've installed 11.2 KDE on a very old samsung V20 specs here: [URL]... My problem is that when I boot I get a black screen with just the mouse pointer. I can boot in failsafe fine, but the graphics are horrible. My question is, is there a workaround or am I flogging a dead horse with this laptop? This is my first venture into Linux, and I was really keen on leaving windows far behind. I've tried quite a few sax2 commands to no avail.
View 2 Replies
View Related
Jan 1, 2011
how I restore dead mouse and keyboard input from the live cd. Basically what happened was I was updating the machine and decided to let them run in the background while my sister's 6 year old son played some tux computer games, when he was finished he switched the entire computer off at the power button and it was still updating in the background. Now there is no mouse or keyboard input, I cannot get into the recovery console, nor can I control a terminal from the login screen in order to successfully complete the update. This means basically the only option to fix it would be to re-install or fix the human user interface device drivers (keyboard and mouse) via the live cd, I am in need of some advice or instructions on how to go about fixing this issue.
View 5 Replies
View Related
Jul 10, 2011
I've got a very weird behaviour with my brand-new Slackware64 13.37 KDE 4.5.5 system. I've so far just installed some basic software from sbopkg and the fglrx-driver.
Whenever I pass the red line as seen in the attached snapshot from within the marked area, my mouse pointer gets stuck at the line for roughly one second and then moves on.
Approaching from the outside this does not happen and if I'm staying inside the area, it moves normally as it does at the rest of my desktop.
Turning on/off compositing does not change this, as well as removing the widgets from the panel or locking them. I always get stuck there.
I found out that it has to do with the setting of my external screen via D-Sub. If I switch back to my laptop screen as main, the problem disappears.
View 1 Replies
View Related
May 7, 2011
I have Open Suse 11.3. I normally use GNOME or KDE sessions. Yesterday I was just thought of trying other Desktop Environments. so I logged out to choose a different session. I tried LXDE and logged back out. After that I found "metacity" in the sessions list and tried it. But no desktop appeared. All I got is black screen a with the mouse pointer/cursor. I waited for quite some time but no desktop, panel, etc loaded or was visible.
I could not figure out how to log off so I hit the start button. After reboot the system automatically chose the same session (It always reuses the last used session) and I was in the same sticky situation. I tried starting in Safe mode as well but still I get the same black screen with just the mouse pointer.
View 6 Replies
View Related
Jun 28, 2010
I've installed Ubuntu 10.04 on an old PC with an Intel 845 series motherboard, using an onboard graphics solution. By default, it boots with an 800x600 screen resolution. When I change the resolution to 1024x768, the resolution switches perfectly, but the mouse pointer disappears. The mouse can still be USED, but I have to 'guess' where the pointer is. The only way I have found to rectify the situation is to reboot, upon which the resolution returns to 800x600 again as well. Kubuntu 10.04 suffers from the same problem, only in Kubuntu the mouse pointer reappears when the resolution switches back to 800x600, so I don't need to reboot.
View 4 Replies
View Related
Jan 5, 2010
have a problem with an Acer Aspire one running linpus linux. I get a black screen with a white mouse pointer at startup. I don't know how this happened. I can interrupt the startup process with ^c and then see the following amongst other text :Loading x11 FronEnd module...Failed to laod x11 FrontEnd moduleFailed to launch SCIM
View 9 Replies
View Related
Aug 16, 2010
I had a perfectly well running CentOS 5 system but with an old crappy monitor. I replaced the monitor by a bigger one, i did a monitor detect to make sure that CentOS would recognize the highest possible resolution. Then changed the display rsolution for the current user.
Now when i login as root just a black screen appears with a white mouse pointer and then nothing. I already deleted all the contents in the home directory /root but no improvement.
When i login as a new user X is starting perfectly.
Anyone have a clue what i need to do or delete to get X working again? I can nuke the whole box and do a reinstall but i'd rather not.
View 3 Replies
View Related
Oct 31, 2010
I'm running Ubuntu 10.10 which I recently installed on this emachines w3107. For some reason, while doing whatever I may be doing, my screen will flash off and on for about a minute, then when it stops flashing; there is no mouse pointer visible. I can still use the mouse, but it's ghost-like.
View 1 Replies
View Related
Jun 3, 2011
I have been trying hard to configure wizardpen for my ubuntu laptop.wed abletSetupWizardpen link for the info. Still it doesn't work. When I put stylus pen on the tablet, mouse pointer goes to the top left corner of the screen and stay there. Not sure what is going wrong.
root@salil-Laptop:~# cat /usr/share/X11/xorg.conf.d/70-wizardpen.conf
Section "InputClass"
Identifier "wizardpen"
[code]...
View 4 Replies
View Related
Jun 15, 2010
I'm a linux newbie so go easy on me with technical terms.I've got a Acer Aspire One ZG5. Everything was working fine until one day when I went to switch it on and it shows up everything its suppose to, the blue logo etc but then it loads upto a black screen with the mouse poitner. I can move the mouse pointer around and such and the lights flash but stop suddenly.I can't use the bios recovery disk as I haven't got a USB big enough.
View 13 Replies
View Related
Jun 3, 2010
Did a quick search for these symptoms and couldn't find anything related. After upgrading to 10.04 I found that the computer (HP NC8000) now crashes frequently and at random intervals. It occurs sometimes after only a few minutes, other times after an hour or two. It happens while its in use, or while its idle, wether the screensaver is on or not, even if its locked and the lid closed. When I walk away and come back I find the screen has gone blank (except for the Mouse Pointer and a cursor in the top left) and the Caps Lock Light and Num Lock Light are flashing (signifying a crash)
I caught it while I was using it and watched as the screen suddenly went blank as described above. No errors or explanations or warning. A reboot restores order, but not for long. Some assistance with diagnosing this would be helpful. I suspect it could be ATI radeon 9600 mobility related, as with each passing version of ubuntu it seems to be more unstable
View 7 Replies
View Related
Aug 8, 2011
Running natty. Main user account. In Ubuntu & Ubuntu Classic, both gnome, no keyboard or on-screen keyboard input. Compiz & metacity both bad. Mouse okay. Other user accounts okay. KDE okay.
Tracked problem to /home/{user}/.gconf/desktop/gnome/session/required_components/%gconf.xml. Removed file, problem goes away.
File contents:
<?xml version="1.0"?>
<gconf>
<entry name="windowmanager" mtime="1303412016" type="string">
<stringvalue>compiz</stringvalue>
</entry>
</gconf>
View 1 Replies
View Related
Dec 7, 2010
I've been using Slackware for ages... since like 1997 or 1998. I have a Slackware 3.x CD around here somewhere. I'm usually the one explaining how Linux works to everyone else. I even got GnuCash working on Slackware. So these two problems ...
1. Keyboard in Xorg. It seems to work, except the down arrow and the page down buttons are mapped as something else (the down arrow causes TEXT TO DISAPPEAR...I've had to type this like three times now...). After a bunch of searches, it looks like a problem with HAL and evdev (whatever that is). I tried setting the model in KDE's Regional control panel but that had no effect.
Xorg.conf settings for this section... you can see some remnants from prior attempts:
I did check that event1 refers to the keyboard. The keyboard is a Microsoft Internet Keyboard that works fine; the arrow keys work great outside of X.
2. Mouse in Xorg. The scroll wheel wants to scroll side to side instead of up and down. This also happens to be a Microsoft product (I like their mice... my wife brought the Microsoft keyboard into the relationship...). It's just a wheel optical 3-button mouse, nothing special. Again, none of my usual xorg.conf edits seem to work; here's what I have right now.
Again, I checked that the mouse is event2.
Someone really should make an upgrade guide for people like me that have been using it for years and aren't really following the tech that explains new features like hal and evdev (I know hal has been around for a couple versions, but I've never gotten involved with it until now). Or maybe there is one and I'm just not aware of it. Basically I just want it to just work, which is why I use Slackware in the first place!
I should mention I did have both working under Slackware 13.1 on this machine until Windows conveniently erased my root partition for me, so I got to do a completely clean Slackware install for the first time in a LONG time. That's when the issue arose. Because I was in a rush, I did a full install. I assume the previous setup was using non-hal/non-evdev methods, but I might as well set this one up using the new methods, right?
I'm using Slackware64 13.1, running on a Core 2 Quad Q8300 @ 2.50 GHz. Hardware is fine - both mouse and keyboard work under Windows XP, and like I said the keyboard is fine outside X. It has to be some configuration problem ...somewhere.
View 11 Replies
View Related
Nov 11, 2010
Installed 13.1 as a guest in VirtualBox with Debian Lenny 5 64bit as host. The mouse, gpm, and the keyboard work alright at the black screen but in the graphical thing, forget its name.....Xsomething, not KDE, there is no mouse or keyboard; for example the screensaver just goes on and on and nothing will stop it.
View 14 Replies
View Related
Mar 11, 2010
Symptoms
- PS/2 mouse works fine under gpm
- PS/2 Keyboard works in console terminal
- Neither Mouse nor Keyboard works under kdm or xdm
- And: #ps aux | grep hal
shows:
82 4259 0.0 0.3 6472 1240 ? Ss Mar10 0:02
/usr/sbin/hald --daemon=yes --use-syslog
but does not show anything like:
root 4298 0.0 0.1 3300 544 ? S Mar10 0:00
hald-addon-input: Listening on /dev/input/event1
- And syslog show: when starting hald with --verbose=yes --use-syslog
Mar 10 20:30:48 darkstar hald[519]: 20:30:48.792 [E] hald.c:124: Cannot
start addon hald-addon-keyboard for udi
/org/freedesktop/Hal/devices/platform_i8042_i8042
_KBD_port_logicaldev_input
Mar 10 20:49:41 darkstar hald[2454]: 20:49:41.651 [E] hald_runner.c:671
: Error running 'hald-addon-keyboard':
org.freedesktop.HalRunner.Failed: Start request failed
- You will find that deleting:
/var/cache/hald/fdi-cache
(and of course: /etc/rc.d/rc.hald restart)
- will allow hald to start the correct module:
/usr/libexec/hald-addon-input
- instead of trying to start a non-existant file:
/usr/libexec/hald-addon-keyboard
My theory is that since hald is the same version in 12.2 and 13.0, had believed that the cache file held valid information, when in fact it did not. I did not think to check the modification date before deleting the file.
View 1 Replies
View Related
Mar 23, 2011
I have problem with my Slackware 13.1. When I run system under log in is "user" after 5 minutes system is hung! I can't move mouse and use keyboard! I didn't have this problem when I run system under log in is root. How I can decide this problem ?
View 6 Replies
View Related
Oct 5, 2010
I just installed Ubuntu 10.10 on my HP Pavilion a320n computer with a ps2 mouse and the mouse pointer points with the bottom of the mouse and not the upper tip of the point. It does the same thing with Ubuntu 10.04.1. In Windows 7 and XP the mouse is normal. I don't know how I could adjust it or is this just a bug in the OS?
View 11 Replies
View Related
Jul 9, 2010
I'm running FC12 and GNOME.If I move the physical mouse about one inch, the mouse pointer moves across the entire screen.That's way too fast and way to sensitive.I prefer the mouse pointer to move far less distance on the screen when the physical mouse is moved.
From System->Preferences->Mouse, I set the various mouse Pointer Speed acceleration and Sensitivity to Slow, Fast, Low, High, and and I couldn't get it any better. At the least sensitive settings. if I move the physical mouse one inch, the mouse pointer moves across the entire screen.How can make the mouse pointer less sensitive to mouse movements?
View 14 Replies
View Related
Dec 14, 2010
Running 10.10 with compiz and gnome
The whole screen goes dim for any of the below examples. running "compiz --replace" fixes it until any of the below happens again. When the screen is dim, a new window opened (ex: firefox new window or a new gnome terminal) is full brightness while the rest of the screen stays dim.
Following causes the screen to go dim: In the screen saver - hit the delete key to backspace when the password field is empty. in firefox - ^f to find on a page - start typing and as soon as the find field has text that does not exist anywhere on the page "Phrase not found" the screen dims. in gnome terminal - the profile has the terminal bell checkbox ON - hit backspace on a bash input line with no text on it.
View 2 Replies
View Related
Nov 10, 2010
For example I'm setting key F1 & F2 keys mouse 1 and mouse 2 click in keyboard..
View 4 Replies
View Related
Feb 26, 2010
Well, just as the title of this post says, I am having keyboard and mouse problems. Here's the storyMy friend Cody wanted me to take a look at his computer for him (I'm sort of known as a Linux nerd in my school lol) because his keyboard and mouse do not at all work in init 4 mode. I've tried reconfiguring the keyboard and mouse by trying a different module. I've even tried reconfiguring X alltogether by running "X -configure", which didn't work
View 3 Replies
View Related
Jun 30, 2011
As the title says i have this error on both my main computer and my laptop. For my main computer see this post, that is when it happened. viewtopic.php?f=30&t=65743
I run the updates on my laptop a while ago and decided to restart it to check if everything went okay. It seems not.
The only way i can get on the desktop, is to choose the recovery mode, su to user and startx.
This is a common error during booting on both computers. Starting the hotplug events dispatcher: udevderror binding control socket, seems udevd is already running
It seems a little strange, same error on both computers.
View 2 Replies
View Related
