Slackware :: QuakeLive And Video Settings?
Apr 18, 2010
I can play QL fine, however when I change video settings from within the game playing full screen and click apply video settings, the screen flashes white briefly(normal for games to do this) however it then does not return me to the game. I can hear the sounds, and I am apparantly in the game because I can fire and move...I just can't see anything. All I see is the firefox window I launched it from, however I can not interact with the firefox window in any way. Clicking anyway just fires in the game that I cannot see..
View 1 Replies
ADVERTISEMENT
Feb 2, 2011
Finally replaced my incredibly antiquated Ti 4200 with a GeForce 9600 GT, but I'm having a few problems. The main one would be that I can't see anything when I drop to terminal (the monitor shuts off)- I could when I had a spare svga monitor hooked up through an adapter, but now I'm using dual DVI monitors. Do not have an svga cable to spare at the moment. The second seems to be a doublethink problem- a good while back when this computer was a fresh install, I could have sworn I had the option for the resolution 1680x1024- this is an *essential* resolution for twinview, because my second monitor is 1280x1024, and setting this widescreen to 5:4 is just... wrong.Simple restart solved the terminal issue (I hotplugged the monitors). Resolution thing is still a standing issue. I have a 1050 capable monitor, but the display portion is an inch shorter than the widescreen.
View 3 Replies
View Related
May 13, 2011
I don't understand what is going on... If I listen music, the sounds quality is just perfect, but if I play quakelive, I start heard some annoying noises such as my headphone wire is damaged. how to remove it? Maybe something wrong with sound drivers? I use ubuntu 10.04 LTS version OS. Sound card is realtek (integrated to motherboard).
View 2 Replies
View Related
Sep 4, 2009
I just did a fresh install of Fedora 11 and the only video resolutions available were 640x480 and 800x600.
The native resolution of the monitor is 1280x1024 and that's what I'd like to use.
I was able to get the display to the proper resolution with the following commands:
Code:
However, rebooting sets it back to 800x600. I have seen the edits to xorg.conf but that file wasn't created.
Is there a way to make the 1280x1028 resolution persistent without creating a xorg.conf file?
View 8 Replies
View Related
Jul 5, 2011
Im trying to setup my configuration but i don't know how.I got dvi-hdmi adapter on Eee pc box 202 and when monitor(19lcd tv) is connected to power source everything is fine but if is switched off doesn't.Mean starting and stopping probably something with auto configuration (video),because when i connect dvi-vga adpater even on off monitor it's does work.Any idea how to correct pernament setting in Kde?So when connected via dvi-hdmi and off monitor -doesn't start fully system..If connected via dvi-vga does work fine
View 2 Replies
View Related
Feb 28, 2011
I'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously.
Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks).
I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots.
So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.
View 1 Replies
View Related
Mar 17, 2009
I have 2 screens connected to my nVidia 8400GS and would like to change my video card settings so that the system boot shows in the Digital screen and not in the Analog one.
View 3 Replies
View Related
Apr 16, 2010
I run Ubuntu 9.04 on with proprietary NVidia driver 180.44.When I change anything in the nvidia-settings, e.g. screen resolution, brightness, second screen etc, everything works fine - except for the fact that I can't play any video files in any player. Sound is there, players don't display any error messages, but the image is black. Flash video within browsers is fine, though.Things go back to normal with the new settings kept after restarting X. However, having to restart X and lose my desktop set up every time when I just want to connect my laptop to my office screen is highly inconvenient.Is this a bug or expected behaviour that I have to live with?
View 3 Replies
View Related
May 26, 2010
I'd like to be able to backup the settings for kalarm but can't seem to find them. Same for Dolphin. Anyone know where they might be located?
View 5 Replies
View Related
Mar 1, 2011
I am migrating to KDE4. When Current goes official I plan to install and give KDE4 a serious run. Because I am running 12.2 I will forego the upgrade path and install fresh in separate partitions. I haven't performed a fresh install since first installing Slackware 10.1. Likely I'll go 64-bit as my system is a dual core AMD with 4GB of RAM. Is there a list somewhere of 32-bit apps that have no 64-bit versions? Through the years I have many system tweaks and customized settings, but I'll be able to migrate and resurrect those readily. Mostly I am concerned with the desktop migration. Any punch list of warnings and "gotchas" are welcomed. Any links focusing on migrating at such a "late" stage in the KDE4 cycle.
I don't want to build the desktop completely from scratch. A fresh install reduces cruft and clutter that might have accumulated through the years, but also means more work configuring the desktop and apps. Fortunately, I long ago housed my user and data file directories on separate partitions and don't have to worry about that. Therefore during the transition I will be dual booting but using the same user accounts. All user accounts currently have $HOME/.kde profile directories that I do not want clobbered by KDE4. Should I rename that directory now and change a handful of KDE environment variables in 12.2 before working with KDE4, such as $KDEHOME and $KDE_CONFIG_DIR? New user account names would be one option, but my primary user account has too many non-KDE settings to migrate.
In that spirit, would somebody post the default Slackware KDE related environment variables so I can compare to those in KDE3? I am browsing the forum and web for various elements I should know or be forewarned, but many of the threads are old and I suspect no longer apply to KDE 4.5.5. I would like to migrate as many KDE 3.5.10 settings as possible, such as KMail, Akregator, Kate, Konsole, KMix, K3B, Kaffeine, Amarok, Digikam, etc. I realize there might be a point of diminishing returns and reconfiguring from scratch might be less problematic. Will both KDE4 and KDE3 be able to use the same KMail files? Or during the transition should I restrict my mail checks to KDE3?
If possible I would like to disable Nepomuk and Strigi before starting my first session in KDE4. I don't want to disable them after starting the first session as then profile files are automatically created. Hopefully nothing more than editing some default configuration files (/usr/share/autostart? Don't install those packages?). I have no need for or interest in Nepomuk (social-semantic desktop). I don't think I have any use for Strigi, which if I understand correctly, focuses on indexing meta data rather than just finding files. As far as I can tell because of PIM apps, disabling Akonadi is futile, so I won't try.
View 10 Replies
View Related
Jun 24, 2010
I switch between two ip configurations, a dhcp one and another with static ip. The problem is that, when I changed the 'eth0' part of /etc/rc.d/rc.inet1.conf file to use dhcp, and restart rc.inet1, I get the original ip address unchanged in eth0 interface, and the newly gotten ip address goes to 'pan1'.I can surf the internet as usual, I have noticed this problem because I can not ping to the default gateway or use the network printer.
Code:
bash-4.1# /etc/rc.d/rc.inet1 restart
Polling for DHCP server on interface eth0:
[code]....
View 1 Replies
View Related
Jul 27, 2011
In [URL] I can right-click on a flash video and have the option to access "local settings" under "Settings" to specify configuration for webcam, mic, etc. But in Facebook I need to adjust a setting and the "Setting" option for local config is gray-ed out, I can't access it.
I'm running OpenSUSE 11.4, and I've seen this in GNOME and KDE within Firefox.
View 3 Replies
View Related
May 11, 2011
I just finished installing Slackware64 13.37 on my Sony Vaio PCG-7153L, and I'm having issues controlling the LCD brightness of the laptop. It still has the stock Slack kernel 2.6.37.6 SMP The brightness controls worked on Fedora 12-14, as well as the Ubuntu 10.04 live disc. I checked /proc/acpi/, but there's nothing in there to control brightness. I reloaded the sony_laptop kernel module, and from dmesg I get:
Code:
sony-laptop: brightness ignored, must be controlled by ACPI video driver From the Ubuntu bug [URL] and the Red Hat bug [URL] it looks like they've already dealt with this problem. However, as I said earlier, my laptop worked fine with Fedora 12-14.I know Slackware does minimal fiddling with the kernel, so I'm thinking this might be an upstream kernel bug...
View 8 Replies
View Related
Sep 9, 2010
I got a Slackware 12.1 on a Dell Inspiron 1525 laptop which is a multi boot system along with Vista and Ubuntu Hardy. I tried using Slackware after several months. The last time I used Slackware, I was at university where the Network settings were Manual - Static IP, Gateway, DNS all specified according to location (dorm room). I moved out of univ and now have a network connection with DHCP. Basically I connect to a server, login with the info the service provider has given me.
Problem is I can't change the Network settings through Control Center in KDE. It just doesn't register any changes even if I reboot. Through Konsole and as root, I could change the settings using netconfig. But then I need a reboot to register the changes. Why is this so? Anyway to avoid a reboot? In my Ubuntu Hardy, there is no need for a reboot when I change the settings. Thats quite convenient.
View 5 Replies
View Related
Feb 12, 2011
I am having a problem getting my Slackware 13.0 to accept a timezone cmos setting change. My cmos was set to local time and my Slackware was displaying the correct time as EST. Cmos was set localtime to be compatible with dual booting Windows I have now removed Windows and replace it with Ubuntu. Now, Ubuntu wants the hardware clock to be UTC, which is the norm for unicis. SO, lets make Slackware treat the hardware clock as UTC.
I go to /etc/hardwareclock make these changes.
utc
#localtime
I reboot setting cmos to UTC, but now when I come up Slackware displays UTC and calls it EST. I go to the date/time app under the system xfce menu, but all it says it is set to UTC (EST) and change from the list below. The list below only has UTC listed. So, now how do I get it subtract the necessary five hours?
View 2 Replies
View Related
May 7, 2011
I installed slack 13.37 (haven't used KDE since 2003) and I can't find where to change the look of the window manager itself. I can see the color themes and the "style" settings but no window decoration settings. Am I missing something? See attached png for System Style settings...
View 2 Replies
View Related
May 18, 2010
Using Dell Inspiron 1564. In windows 7 and other distros like ubuntu, openSUSE sound was perfect. However the sound here is pretty low. Not sure if there's some configuration I am missing. I ran alsaconf, maxed out the bars in alsamixer and did a alsactl store. But the sound is still low.
Code:
# lspci | grep Aud
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
02:00.1 Audio device: ATI Technologies Inc RV710/730
View 14 Replies
View Related
Jan 26, 2011
Once I bring up alsamixer, or mixer from menu, how do you save the settings and have them restored next boot so you don't have to always set them again after a re-boot up?
View 1 Replies
View Related
Apr 20, 2011
I am running Slackware X68_64 and I just purchased a second monitor. I enable separate x screens with nvidia-settings and when I reboot I get a black screen and when I put my mouse over to the secondary monitor I get X for the mouse pointer. Than after a while it just blacks out.
View 11 Replies
View Related
Mar 29, 2010
I am trying to install Fedora 12 using the x86-64 DVD. My problem is everytime I try to install with the normal settings or basic video deriver setting it says "X failed to load" and so Anaconda never loads. How do i fix this problem. I have an Nvidia 7800GTX.
View 1 Replies
View Related
Jul 25, 2010
When I run:
# Ping 127.0.0.1
Returns nothing. As if expecting an answer that never comes. Then press Ctr + C and returns:
--- 127.0.0.1 ping statistics ---
117 Transmitted packets, 0 received, 100% packet loss, time 116009ms
I use 3g modem connection configured with the command:
# pppsetup
The internet connection is normal. But without the ping localhost also can not open the settings for CUPS.
Here is my /etc/resolv.conf (if it helps in something):
google.com search
nameserver 8.8.8.8
nameserver 8.8.4.
code....
View 2 Replies
View Related
Feb 19, 2011
I am loving Slackware, but my Westinghouse monitor is having a hard time recognizing the screen resolution. After typing in startx, I get a black screen. I can plug my box into my trusty test monitor, change the res to a config that the Westinghouse will recognize,then switch monitors and all is fine.How can I edit the res and have Slackware remember the settings? This happens every time I reboot. I am logging in as root, I have not added a user yet at this point.
View 3 Replies
View Related
Jun 23, 2011
I want to set the HTTP_PROXY and HTTPS_PROXY and http_proxy and FTP_PROXY environment variables "somewhere", so all programs that recognise these can find them. I need root to find them for slackpkg and sbopkg, I need users to find them for Dropbox, I need them for cronjobs and scripts and wget.So I want to set these environment variables up somewhere, preferably something in /etc and have them set and accessible for everyone and everything. I am not using KDE or XFCE or any desktop. I need a command line solution.
Where is the best place to put this? I see that some other distros have a /etc/environment and these variables go in there. In Slackware, should I add them as a new file in /etc/profile.d and have them added every time /etc/profile is accessed? Is there a Slackware approved method that I don't know about?
View 6 Replies
View Related
Mar 15, 2010
I finally got around to installing the Nvidia driver (gotten from Slackbuilds.org).
Overall, I'm pretty happy with it, but it wants to default to 1280x1024 resolution and we prefer 1024x768 on our old 17" CRT monitor.
No matter what I do, though, it starts up in 1280x1024. We start X from runlevel 3 and go into KDE 4.3.1.
It is not difficult to change to 1024x768 using the Nvidia configuration utility, but then the menu fonts are HUGE -- especially in Thunderbird and Firefox.
My xorg.conf is below.
xorg.conf:
Code:
View 3 Replies
View Related
May 6, 2011
I did a upgrade from 13.1 to 13.37 both 64 bit.Then I had the urge to checkout KDE 4.6.2 Now there the wheels came off :I get this message trying to start system settings.System Settings was unable to find any views, and hence has nothing to display.Anyway its my fault had a wrong version in the directory I installed from.
View 1 Replies
View Related
Feb 26, 2011
I have Slackware 13.1 x64 and my graphic card is ATI Radeon HD 2400 on my laptop. I install from ATI official site driver for this card and now when I try to come in System Settings->Desktop I got this error:
Executable: systemsettings PID: 13956 Signal: 11 (Segmentation fault)
Quote:
View 5 Replies
View Related
Mar 3, 2011
How can I set it so that the account can change the settings in power manager? They're all grey'd out and unchangable And when I click on hibernate, it says suspend and hibernate are only supported through HAL, which is unavailable. I'm sure that hald is running.
View 10 Replies
View Related
Dec 3, 2010
I am trying to switch to KDE4.4.5 on my main machine. I installed the KDE packages and also the german language file. Everything works fine except the language settings. When I try to start it crash and a KDE crash dialog opens that gives this "developer information":
Code:
Application: System Settings (systemsettings), signal: Segmentation fault
Traceback (most recent call last):
File "/usr/share/gdb/auto-load/usr/lib/libgobject-2.0.so.0.2200.5-gdb.py", line 9, in <module>
from gobject import register
[code].....
It works on my netbook. I run on both machines Slackware 13.1. The only difference I can think of is that KDE was pre-installed on my netbook and I just upgraded it. On my main machine I installed all packages except the packages of kde and kdei.
View 2 Replies
View Related
Jun 5, 2010
this isn't so much slackware specific as it is general linux related, but using the default huge slackware kernel included with 13.1, acpi reports cpu temps of about 55 celsius i always like to run my own kernels though, and using the latest stable kernel, i have compiled one using what i believe is necessary for my hardware, and everything works as expected except that acpi reports my cpu temp as 80 celsius at idle, causing my fan to be running constantly
so without simply using the generic config included with slack in the newer kernel, what do you think might be causing the thermal issues? i used diff on the two configs and the output is over 5,000 lines, so thats not a huge help, and im really not even sure what to be looking for the cpu is an intel i7 720qm, so if anyone might know any specific settings for that processor type needed for acpi to interface with it properly that would be much obliged here is my config for potential review: [URL] also, if i disable acpi entirely, the fan operates as normal but i cannot get readings obviously
View 1 Replies
View Related
Dec 5, 2010
Is there any configure tool for xf86-video-intel like "nvidia-settings"?
View 1 Replies
View Related
