General :: Slackware 13.1 Screen Resolution Settings Not Recognized?
Feb 19, 2011
I am loving Slackware, but my Westinghouse monitor is having a hard time recognizing the screen resolution. After typing in startx, I get a black screen. I can plug my box into my trusty test monitor, change the res to a config that the Westinghouse will recognize,then switch monitors and all is fine.How can I edit the res and have Slackware remember the settings? This happens every time I reboot. I am logging in as root, I have not added a user yet at this point.
This is my first posting as a Linux Newbie. I have installed Ubuntu 10.04 inside of a MS Virtual PC on my Vista machine. Everything seems to work beautifully and is stable. However, I would like to use a resolution higher than the current maximum of 800x600. I've poked around on the web and have tried various tips. I tried using the xrandr options which added a higher resolution mode, but when I would try to set the output to that resolution, I would get an error message to the effect that I could not exceed the current maximum of 800x600.
I tried to cobble parameter values together and create an xorg.conf file, but every iteration seems to produce a bunch of colorful vertical bars within my Virtual PC window, and I would have to blow away that virtual PC setup and rebuild it (along with reinstalling Ubuntu). As I said, 800x600 is not a show stopper, but I would like to take advantage of the real estate I have with my display. These "fifty-five year old" eyes could benefit from the larger size. FYI, I did take a stab at installing Virtual Box, but got the infamous "blue screen", so I would rather stick with what appears to be a stable virtual PC base.
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
I am unable to change mu screen resolution in slackware 12.2. I am editing the xorg.conf in "etc/X11/" with nano. My graphics card is a ATI with 64MB RAM. My monitor is capable of 1280x1024 @ 60Hz. Heres the xorg.conf:
Code: # File generated by xf86config. # Copyright (c) 1999 by The XFree86 Project, Inc. # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: .....
I have a Dell Latitude C840 with a nVidia GeForce4 440 Go card and the screen is reported to go to 1600x1200, 32 bpp on Wikipedia. But I am unable to choose that resolution in Slackware. last time i changed the resolution to a higher one i needed to edit the xorg.conf, and change the HorizSync setting to match the monitor. but im unable to find the specifications on the screen for the C840. is there another way of doing this ? mabye a nVidia driver or something ?
Code: # Monitor section # Any number of monitor sections may be present Section "Monitor" Identifier "My Monitor" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5 - 50.0
# HorizSync30-64 # multisync # HorizSync31.5, 35.2 # multiple fixed sync frequencies # HorizSync15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 40-90 EndSection
I've got a Disney edition Asus EeePC with an xp/9.10 nbr dual boot.The 9" screen has a native resolution of 1024x600, but in xp it can expand that to 1024x768- either by scrolling the desktop up and down a bit, or by what they call "LCD Compress" mode, where ever thing gets squished vertically a bit to fit 768pixels of info in 600 pixels of space.
My daughter uses it to play games on webkinz.com, and their games pop up on a 800px high non resizable or scrollable window, so there are controls and junk that fall off the bottom that can't be reached unless I'm put it in one of the 768 pixel modes. That, and with her task bar set to auto hide, she can play games and have a good time. how do I set up Ubuntu 9.10 to do the same thing? Right now, the only screen resolution in Ubuntu is 1024x600.
I've installed Fedora 12 KDE using VMWare, but I can't for the life of me get my display settings to stick. When I change the resolution, my display responds appropriately but upon logging out or rebooting, these settings are lost. Am I missing something completely obvious here?
After installing some (much needed) upgrades, I am stuck being unable to install nvidia-settings after screen-resolution-extra upgraded from .11 to .13. Nvidia-settings, supposedly, requires .11. I can, of course, downgrade to .11, but I do not know if this is recommended. Is there anyway to get nvidia-settings back without downgrading? What is a good course of action?
I booted Hardy, because Karmic detects no screen, after trying to adjust to a previously recognized resolution. As good as it is, does it seem like some basic computer functions just do NOT improve?
Recently I have acquired 2-port KVM switch. When the monitor is connected through this KVM in Windows 7 resolution is properly detected - 1280x1024. When I go under Linux (openSUSE 11.4 with KDE, nVidia 260.19.44) there is a problem with the resolution. In the screen settings does not appear a resolution higher than 1024x768. How do I set the desired resolution in Linux?
Just got an HP dv6-2150 laptop. Dual boot with Windows 7 and 9.04 (9.10 will not work but that's a different story). The screen resolution is too low and is set at the highest option available (1024x768 which is a 4:3 aspect ratio). The HP uses the new Intel i3-330m chipset with on-board Intel HD graphics. The system is capable of 1366x768 resolution (16:9) - so how do I get it there? xorg.conf looks real generic - nothing specific to Intel.
I have installed Ubuntu 10.4 on Virtual Box, I have installed it successfully, the only problem is when I check the display settings it only have 2 options : 600 X 400 and 800 X 600 and this makes it difficult to work on Ubuntu as 800 X 600 is half the size of my desktop. How I can increase / configure the display settings so that atleast I can fit ubuntu screen into my screen size.
I did install the addition application, restarted the OS but still I don't see any display resolution 1200 X 800, tried pressing ctrl+D nothing happens, after installing I saw it updated mouse cursor now i don't have to press ctrl key again n again to enter into the ubuntu OS but still struggling with the resolution as it's too small, please guide me (here is the screen shot of my screen after installing the addition app).
I'm a relatively new Debian user, having come from Ubuntu. I recently bought a Dell micro-server to function as my Kodi media player. I installed an nVidia GeForce 210 to output to my Pioneer home theatre amplifier. The amp takes all my inputs (eg. Satellite set-top decoder, PS3, Kodi etc) and outputs to the TV. I installed XFCE as my desktop environment so that I could still interact with it via VNC.
Everything is working great except for one exceptionally annoying problem! Every day, I find that I am having to VNC into the desktop, load up nVidia X Settings, and change my screen resolution from Auto to 1920x1080 because it has lost the display configuration and the screen is blank. I presume this happens when the amplifier switches from one input to the next. It doesn't matter if I save the configuration to my X11.conf file or not - it still resets itself.
Before, this setup would run for months without any intervention (Same amplifier + HP microserver + Ubuntu + LXDE + ATI video card), so I'm pretty confident that the issue is either Debian, XFCE, or the nVidia card.
I've installed Slackware 13.37, it's working well in general There is no xorg.conf file How do I get it to remember my screen resolution? (I'm using a CRT monitor and often adjust the default resolution) Having to change the resolution after each startup is not ideal I tried using my old xorg.conf file from Slack 12.2 with my resolution settings.
When i startx, the resolution of the kde is 1280 - that's awful, for my monitor it needs to be 1152x864, so everytime i startx my slackware i have to go to system settings and set the proper resolution...
What should i do in order to set one resolution-size so it will keep it that until i changed it, and everytime i start the X i will be that type of resolution ?
I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?
I made a total reinstall of Slack 13.1 the other day and all went seemingly well. After a lot of experimenting and deciding I wanted the disk partitioned differently, a reinstall felt about right. But when I started X the resolution was all too low. xorg.conf was adjusted with the properties of my screen (GDM 4011P). Once upon a time, the Xorg config-tool would ask me my opinion, but now it flashes by and I have to live with what it comes up with.
The nVidia driver was installed (legacy for GeForce 3). I know the config is read, because it fails parsing if I have kHz with the sync-figures. But it otherwise disregard my wish to run at 1280x1024. In XFCE I can run the nVidia configuration tool, but it offers only auto, 320x240 or 640x480. The screen is too small for me to click "ok" on several occasions. The machine is capable of 64bit, 2GHz. But I installed the 32bit version of 13.1, it has 1,5GB RAM.
Is there a way to determine the native resolution of the current console display device from the shell?
I know I can get the current console settings, but I'm looking for the native screen size of the display hardware, whether or not it conflicts with settings.
I'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously. Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks).
I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots.
So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.
Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
I have problem with resolution (@gnom desktop). In Yast --> videocard & monitor is all right. There is correct resolution 1366x768 (WXGA). Also the videocard ( I don't have really one, only chipset "Intel Mobile GM45" ) is correct recognized. But Monitor isn't recognized, and I don't know which one I have (It's notebook from acer).
Nevertheless if I go direct in monitor preferences (at the bottom the monitor with a ruler symbol) the resolution is set to 800x600 and I can only change to 640x480. The monitor is as 15" recognized (I have 15.4", even a bit more broadly - 1366x768) and now I don't know what to do. All symbols, all programs, everything is huge! How is it possible to configure the correct one resolution?
I have recently installed Fedora 13 on my netbook. I wish to use my HP Officejet via the HPLIP utility. The problem with this is that when I have the firewall turned on, the printer is not recognised at all during setup. When the firewall is switched off, the printer is recognised. The printer in question is an HP Officejet 8500a which is connected via Ethernet cable to a wireless router. I would like to know if there are any network ports (that's used by HPLIP) that I could 'turn on' in the firewall that could let my computer recognise the printer.
I've tried Kubuntu, but I don't get any higher screen resolution than 640*480. The graphics adapter that seems to get me in trouble is an Intel based one.
I'm open to other OS'es that uses KDE -I just need to be able to use Kdenlive.
I've just upgraded from Debian Lenny to Squeeze. It didn't go as smoothly as I had hoped, one of the casualties being the proprietary nvidia driver I had previously installed. So I fixed that using the 'Debian way' rather than NVIDIA's installer, and that is now all fine. So far so good. However, when I boot up, pre starting X, my screen is a much lower resolution than it used to be (640x480, I think). Really chunky and ugly as it runs through the start up scripts. I assume that somewhere early in the startup scripts the nvidia driver is being loaded and set to a low resolution. Can someone advise me where this might be, and what to look for? Am I on the right track? I stress that this is before X is started. Once X has started the screen resolution is as I want.
Have just installed my frist linux os and the screen has a big black border around it. Set the res on install to 1024x768 & this is displayed in display settings. If I run xrandr in a shell tool it only shows 640x480 available.xorg.conf has "1024x768" "800x600" & "640x480" available.Have search the web but nothing I've found works.
i have been searching for the past few days on how to do this i have found many articles all telling me slightly different ways of doing so but none have worked. the monitor i am using displays at 1680x1050@60Hz however most access will be from a laptop running at 1366x768 through VNC i have the VNC working thats not a problem my current problem is that when i turn it on the screen defaults to 1600x1200@60Hz when i go to System>Preferences>Screen Resolution the options i get are 1600x1200, 1280x1200,1024x768, 800x600, 640x480 however when i change to something other than 1600x1200 the refresh rate changes to 85Hz and cannot be displayed by my monitor so i have to wait for it to default back, not that i want to change it to any of those in the long term /etc/X11/xorg.conf looks like this (i have only edited the Modes line)
